Theoretical Studies on Substituent Effect of the Reaction of Amide and Formaldehyde

The thermodynamic properties of the reaction of amide and formaldehyde were calculated via B3LYP method when substituents chosen included CH3,CH2CH3,CH2CH2CH3,CH2CH2CH2CH3,CH(CH3)2,CH2CH(CH3)2,CH(CH3)CH2CH3 and C(CH3)3.Based on the optimization of the structures for reactants and products,the thermodynamic functions of all the species for an actual state were obtained.The thermodynamic data and the equilibrium constants were investigated within a temperature range of 300―343.15 K.The calculated results show that the reaction is exothermic and spontaneous.The trends of all thermodynamic properties are consistent with the temperature.The preferential order of the substituent effect is CH2CH(CH3)2CH(CH3)CH2CH3CH2CH2CH2CH3 CH2CH2CH3CH2CH3≈CH(CH3)2C(CH3)3≈CH3.     

Synthesis and characterization of octa- and hexanuclear polyoxomolybdate wheels: role of the inorganic template and of the counterion

Eight new compounds based on [O3PCH2PO3]4- ligands and {MoV2O4} dimeric units have been synthesized and structurally characterized. Octanuclear wheels encapsulating various guests have been isolated with different counterions. With NH4+, a single wheel was obtained, as expected, with the planar CO32- guest, (NH4)12[(MoV2O4)4(O3PCH2PO3)4(CO3)2].24H2O (1a), while with the pyramidal SO32- guest, only the syn isomer (NH4)12[(MoV2O4)4(O3PCH2PO3)4(SO3)2].26H2O (2a) was characterized. The corresponding anti isomer was obtained with Na+ as counterions, Na12[(MoV2O4)4(O3PCH2PO3)4(SO3)2]39H2O (2b), and with mixed Na+ and NH4(+) counterions, Na+(NH4)11[(MoV2O4)4(O3PCH2PO3)4(SO3)2].13H2O (2d). With [O3PCH2PO3]4- extra ligands, the octanuclear wheel Li12(NH4)2[(MoV2O4)4(O3PCH2PO3)4(HO3PCH2PO3)2].31H2O (4a) was isolated with Li+ and NH4+ counterions and Li14[(MoV2O4)4(O3PCH2PO3)4(HO3PCH2PO3)2].34H2O (4c) as a pure Li+ salt. A new rectangular anion, formed by connecting two MoV dimers and two MoVI octahedra via methylenediphosphonato ligands with NH4+ as counterions, (NH4)10[(MoV2O4)2(MoVIO3)2(O3PCH2PO3)2(HO3PCH2PO3)2].15H2)O (3a), and Li9(NH4)2Cl[(MoV2O4)2(MoVIO3)2(O3PCH2PO3)2]. 22H2O (3d) as a mixed NH4+ and Li+ salt have also been synthesized. The structural characterization of the compounds, combined with a study of their behavior in solution, investigated by 31P NMR, has allowed a discussion on the influence of the counterions on the structure of the anions and their stability. Density functional theory calculations carried out on both isomers of the [(MoV2O4)4(O3PCH2PO3)4(SO3)2]12- anion (2), either assumed isolated or embedded in a continuum solvent model, suggest that the anti form is favored by approximately 2 kcal mol(-1). Explicit insertion of two solvated counterions in the molecular cavity reverses this energy difference and reduces it to less than 1 kcal mol(-1), therefore accounting for the observed structural versatility.     

Preparation of tungsten alkyl alkylidene alkylidyne complexes and kinetic studies of their formation

An equilibrium mixture of alkyl alkylidyne W(CH2SiMe3)3(CSiMe3)(PMe3) (1a) and its bis(alkylidene) tautomer W(CH2SiMe3)2(=CHSiMe3)2(PMe3) (1b) has been found to undergo an alpha-hydrogen abstraction reaction in the presence of PMe3 to form alkyl alkylidene alkylidyne W(CH2SiMe3)(=CHSiMe3)(CSiMe3)(PMe3)2 (2). In the presence of PMe3, the formation of 2 follows first-order kinetics, and the observed rate constant was found to be independent of the concentration of PMe3. The activation parameters for the formation of 2 are Delta H = 28.3(1.7) kcal/mol and Delta S = 3(5) eu. In the presence of PMe2Ph, an equilibrium mixture of W(CH2SiMe3)3(CSiMe3)(PMe2Ph) (3a) and its bis(alkylidene) tautomer W(CH2SiMe3)2(=CHSiMe3)2(PMe2Ph) (3b) was similarly converted to W(CH2SiMe3)(=CHSiMe3)(CSiMe3)(PMe2Ph)2 (4). The observed rate of this reaction was also independent of the concentration of PMe2Ph. These observations suggest a pathway in which the tautomeric mixtures 1a,b and 3a,b undergo rate-determining, alpha-hydrogen abstraction, followed by phosphine coordination, resulting in the formation of the alkyl alkylidene alkylidyne complexes 2 and 4.     

p-tert-Butylcalix[4]arene complexes of molybdenum and tungsten: reactivity of the calixarene methylene C-H bond and the facile migration of the metal around the phenolic rim of the calixarene

p-tert-Butylcalix[4]arene, [CalixBut(OH)4], reacts with Mo(PMe3)6 and W(PMe3)4(eta2-CH2PMe2)H to yield compounds of composition {[CalixBut(OH)2(O)2]M(PMe3)3H2} which exhibit unprecedented use of a C-H bond of a calixarene methylene group as a binding functionality in the form of agostic and alkyl hydride derivatives. Thus, X-ray diffraction studies demonstrate that, in the solid state, the molybdenum complex [CalixBut(OH)2(O)2]Mo(PMe3)3H2 exists as an agostic derivative with a Mo...H-C interaction, whereas the tungsten complex exists as a metallated trihydride [Calix-HBut(OH)2(O)2]W(PMe3)3H3. Solution 1H NMR spectroscopic studies, however, provide evidence that [Calix-HBut(OH)2(O)2]W(PMe3)3H3 is in equilibrium with its agostic isomer [CalixBut(OH)2(O)2]W(PMe3)3H2. Dynamic NMR spectroscopy also indicates that the [M(PMe3)3H2] fragments of both the molybdenum and tungsten complexes [CalixBut(OH)2(O)2]M(PMe3)3H2 migrate rapidly around the phenolic rim of the calixarene on the NMR time scale, an observation that is in accord with incorporation of deuterium into the methylene endo positions upon treatment of the isomeric mixture of [CalixBut(OH)2(O)2]W(PMe3)3H2 and [Calix-HBut(OH)2(O)2]W(PMe3)3H3 with D2. Treatment of {[CalixBut(OH)2(O)2]W(PMe3)3H2} with Ph2C2 gives the alkylidene complex [CalixBut(O)4]W=C(Ph)Ar [Ar = PhCC(Ph)CH2Ph].     

CH4,CO2和O2制合成气反应中载体对Ni催化剂抗氧化性能的影响

在ＣＨ４、ＣＯ２ 催化氧化制合成气反应中, Ｎｉ／Ａｌ２Ｏ３ 催化剂在高温下生成ＮｉＡｌ２Ｏ４ 尖晶石,是导致催化剂失活的一个重要因素． 通过向载体（Ａｌ２Ｏ３）中添加各种氧化物, 使得催化剂的抗氧化性能得到改善． 并运用ＴＰＲ、ＸＲＤ对催化剂进行表征, 发现催化剂的抗氧化性顺序为： Ｎｉ／ＣａＯ－Ａｌ２Ｏ３ ＞ Ｎｉ／ＭｇＯ－Ａｌ２Ｏ３ ＞ Ｎｉ／ＣｅＯ２－Ａｌ２Ｏ３ ＞ Ｎｉ／Ｌａ２Ｏ３－Ａｌ２Ｏ３ ＞ Ｎｉ／Ｙ２Ｏ３－Ａｌ２Ｏ３ ＞ Ｎｉ／ＴｉＯ２－Ａｌ２Ｏ３＞ Ｎｉ／Ａｌ２Ｏ３＞ Ｎｉ／Ｆｅ２Ｏ３－Ａｌ２Ｏ３．     

Synthesis of CuII-RuII-CuII trinuclear complexes via redox reaction of copperI across thiosemicarbazones coordinated to rutheniumII

Pyridine-2-carbaldehyde thiosemicarbazones [C5H4N1-C(H)N2-N3H-C(S)-N4HR, R = H, L1H2; CH3, L2H2-Me; CH2CH3, L3H2-Et] with Ru(PPh3)3Cl2 have formed mononuclear RuII precursors for the generation of trinuclear complexes. The reaction of 2 mol each of L1H2, L2H2-Me, or L3H2-Et with Ru(PPh3)3Cl2 in the presence of Et3N has yielded mononuclear complexes [Ru(N3,S-L1H)2(PPh3)2] (1), [Ru(N3,S-L2H-Me)2(PPh3)2] (2), and [Ru(N3,S-L3H)2(PPh3)2] (3). The addition of 2 equiv of copperI chloride solution to complex 1 in acetonitrile has formed a novel trinuclear complex, (Ph3P)2RuII(L1)2CuII2Cl2 (4), in which the pendant amino group (-N4H2) loses one hydrogen along with the oxidation of CuI to CuII. In this complex, RuII is bonded to two P, two S, and two N3 atoms, while each CuII is coordinated to N1, N2, N4, and Cl atoms. Reaction with copper(I) bromide yielded a similar trinuclear complex, (Ph3P)2Ru(L1)2CuII2Br2 (5). From precursors 2 and 3, analogous complexes (Ph3P)2RuII(L2-Me)2CuII2Cl2 (6), (Ph3P)2RuII(L2-Me)2CuII2Br2 (7), (Ph3P)2RuII(L3-Et)2CuII2Cl2 (8), and (Ph3P)2RuII(L3-Et)2CuII2Br2 (9) have been synthesized. These complexes have been characterized using analytical, spectroscopic, and electrochemical techniques. Single-crystal X-ray crystallography has been carried out for precursor 2 and all of the trinuclear complexes, 4-9. X-band electron spin resonance and UV-vis spectra have confirmed the presence of CuII. The cyclic voltammetry studies support the RuII/RuIII redox behavior of this metal in trinuclear complexes.     

Structural and kinetic study of reversible CO2 fixation by dicopper macrocyclic complexes. From intramolecular binding to self-assembly of molecular boxes

A study of the reversible CO2 fixation by a series of macrocyclic dicopper complexes is described. The dicopper macrocyclic complexes [Cu2(OH)2(Me2p)](CF3SO3)2, 1(CF3SO3)2, and [Cu2(mu-OH)2(Me2m)](CF3SO3)2, 2(CF3SO3)2, (Scheme 1) containing terminally bound and bridging hydroxide ligands, respectively, promote reversible inter- and intramolecular CO2 fixation that results in the formation of the carbonate complexes [{Cu2(Me2p)}2(mu-CO3)2](CF3SO3)4, 4(CF3SO3)4, and [Cu2(mu-CO3)(Me2m)](CF3SO3)2, 5(CF3SO3)2. Under a N2 atmosphere the complexes evolve CO2 and revert to the starting hydroxo complexes 1(CF3SO3)2 and 2(CF3SO3)2, a reaction the rate of which linearly depends on [H2O]. In the presence of water, attempts to crystallize 5(CF3SO3)2 afford [{Cu2(Me2m)(H2O)}2(mu-CO3)2](CF3SO3)4, 6(CF3SO3)4, which appears to rapidly convert to 5(CF3SO3)2 in acetonitrile solution. [Cu2(OH)2(H3m)]2+, 7, which contains a larger macrocyclic ligand, irreversibly reacts with atmospheric CO2 to generate cagelike [{Cu2(H3m)}2(mu-CO3)2](ClO4)4, 8(ClO4)4. However, addition of 1 equiv of HClO4 per Cu generates [Cu2(H3m)(CH3CN)4]4+ (3), and subsequent addition of Et3N under air reassembles 8. The carbonate complexes 4(CF3SO3)4, 5(CF3SO3)2, 6(CF3SO3)4, and 8(ClO4)4 have been characterized in the solid state by X-ray crystallography. This analysis reveals that 4(CF3SO3)4, 6(CF3SO3)4, and 8(ClO4)4 consist of self-assembled molecular boxes containing two macrocyclic dicopper complexes, bridged by CO32- ligands. The bridging mode of the carbonate ligand is anti-anti-mu-eta1:eta1 in 4(CF3SO3)4, anti-anti-mu-eta2:eta1 in 6(CF3SO3)4 and anti-anti-mu-eta2:eta2 in 5(CF3SO3)2 and 8(ClO4)4. Magnetic susceptibility measurements on 4(CF3SO3)4, 6(CF3SO3)4, and 8(ClO4)4 indicate that the carbonate ligands mediate antiferromagnetic coupling between each pair of bridged CuII ions (J = -23.1, -108.3, and -163.4 cm-1, respectively, H = -JS1S2). Detailed kinetic analyses of the reaction between carbon dioxide and the macrocyclic complexes 1(CF3SO3)2 and 2(CF3SO3)2 suggest that it is actually hydrogen carbonate formed in aqueous solution on dissolving CO2 that is responsible for the observed formation of the different carbonate complexes controlled by the binding mode of the hydroxy ligands. This study shows that CO2 fixation can be used as an on/off switch for the reversible self-assembly of supramolecular structures based on macrocyclic dicopper complexes.     

Complexation of Ketoconazole by Native and Modified Cyclodextrins

Complexation of ketoconazole (KET), a broad-spectrum antifungal drug, with β- and γ-cyclodextrins (CDs), heptakis (2,6-di-O-methyl)-β-CD (2,6-DM-β-CD), heptakis (2,3,6-tri-O-methyl)-β-CD (TM-β-CD), 2-hydroxypropyl-β-CD (2HP-β-CD) and carboxymethyl-β-CD (CM-β-CD) was studied. The stability constants were determined by the solubility method at pH = 6 and for 2,6-DM-β-CD and CM-β-CD at pH = 5. At pH = 6, the stability constants increased in the order: TM-β-D < γ-CD < 2HP-β-CD < β-CD < CM-β-CD < 2,6-DM-β-CD. At pH = 5, due to the increased ionization of KET, the stability constant with CM-β-CD increased and with 2,6-DM-β-CD decreased. For complexes of KET with 2HP-β-CD and 2,6-DM-β-CD, the thermodynamic parameters of complexation were determined from the temperature dependence of the corresponding stability constants. For β–γ and TM-β-CD complexes, calculations using HyperChem 6 software by the Amber force field were carried out to gain some insight into the host–guest geometry.     

多氟代烃类的反应II: 氟氯烯烃与三氯化铝的反应

研究了以CFCl2CF2CF=CF2(1)和CFCl2CF=CFCF2(2)为原料与三氯化铝的反应.结果获得重排产品CCl2=CF2CF2CF3(3).结果支持了从1到3的分子间重排反应的机理.在激烈条件下,3进一步与氯化铝反应得到CCl2=CFCCl2CF3(4),CCl2=CClCCl2CF3(5),CCl2=CClCCl2CClF(6),CCl2=CClCCl2CFCCl2(7)和CCl2=CClCCl2CCl3(8).由分离所得产品的结构可推断化合物3中氟原子被氯原子取代的稳定性按以下次序:CF3->CF=>=-CF2CF=.反应条件对产品得率的影响也被讨论了.     

Synthesis of deuterium-labeled derivatives of dimethylallyl diphosphate

Short practical syntheses for five deuterium-labeled derivatives of dimethylallyl diphosphate (DMAPP) useful for enzymological studies are reported. These include the preparation of the C1-labeled derivatives (R)-[1-2H]3-methylbut-2-enyl diphosphate ((R)-[1-2H]1-OPP) and (S)-[1-2H]3-methylbut-2-enyl diphosphate ((S)-[1-2H]1-OPP), the C2-labeled derivative [2-2H]3-methylbut-2-enyl diphosphate ([2-2H]1-OPP), and the methyl-labeled derivatives (E)-[4,4,4-2H3]3-methylbut-2-enyl diphosphate ((E)-[4,4,4-2H3]1-OPP) and (Z)-[4,4,4-2H3]3-methyl-but-2-enyl diphosphate ((Z)-[4,4,4-2H3]1-OPP).     

Theoretical Study of Decomposition Mechanism of Azoisobutyronitrile

The decomposition mechanisms of azoisobutyronitrile were systematically investigated. Density function theory B3LYP/6-311G*, B3LYP/6-311+G* and BHandH/6-31+G** methods were employed to optimize the geometry parameters of the reactants, transition states, possible intermediates and products based on the detailed potential energy surfaces scanned with AM1. The reaction mechanisms were also analyzed theoretically. The results indicate that the decomposition of azoisobutyronitrile is a two-bond (three body) synchronouscleavage process in the ground state (CH3)2CNC-N=N-CCN(CH3)2→2(CH3)2CNC·+N2; and is a twobond asynchronous cleavage process while in the triple state (CH3)2CNCN=N-CCN(CH3)2→(CH3)2CNCN=N· · ·CCN(CH3)2→2(CH3)2CNC·+N2. The calculations rationalize and verify all experimental facts.     

A novel classification of Lewis acids on the basis of activity and selectivity

Group 3-15 metal chlorides (Lewis acids) were classified on the basis of activity and aldehyde- and aldimine-selectivity in an addition reaction of a silyl enol ether. Based on the experimental results, metal chlorides (Lewis acids) were classified as follows: A, active; B, weak; C, inactive for the activation of the aldehyde and/or aldimines. Groups A and B were further divided into A-1 or B-1 (aldehyde-selective), A-2 or B-2 (aldimine-selective), and A-3 or B-3 (neutral). The final classification is as follows: A-1, BCl3, AlCl3, TiCl4, GaCl3, ZrCl4, SnCl4, SbCl5, SbCl3, HfCl4, ReCl5; A-2, ScCl3, FeCl3, InCl3, BiCl3; A-3, NbCl5, MoCl3. MoCl5, SnCl2, TaCl5, WCl5. WCl6, ReCl3, TlCl3; B-1, none; B-2, SiCl4, FeCl2, CoCl2, CuCl, CuCl2, GeCl4, YCl3, OsCl3, PtCl2; B-3, ZnCl2, RuCl3; C, VCl3, CrCl3, MnCl2, NiCl2, RhCl3, PdCl2, AgCl, CdCl2, IrCl3, AuCl, HgCl2, HgCl, PbCl2. This classification has revealed several new fundamental aspects of elements (metal chlorides) as Lewis acids.     

二萘并噻咯的合成及性能

Siloles constitute an important emerging class of photoluminescent materials. A series of compounds consisting of silole cores and fused naphthalene were synthesized and characterized:6, 6-dimethyl-1, 2, 3, 4, 8, 9, 10, 11-octapropyl-6H-dinaphtho[2, 3-b:2', 3'-d]silole, 1, 2, 3, 4, 8, 9, 10, 11-octabutyl-6, 6-dimethyl-6H-dinaphtho[2, 3-b:2', 3'-d]silole, 6, 6-diphenyl-1, 2, 3, 4, 8, 9, 10, 11-octapropyl-6H-dinaphtho[2, 3-b:2', 3'-d]silole, and 1, 2, 3, 4, 8, 9, 10, 11-octabutyl-6, 6-diphenyl-6H-dinaphtho[2, 3-b:2', 3'-d]silole. These dinaphthalene-fused siloles were synthesized from diiodonaphthalene, which was prepared by a direct coupling method. Subsequent reaction in the presence of n-butyllithium yielded 3, 3'-diiodo-2, 2'-binaphthalene. Direct substitution of two chloride ions from Ph₂SiCl₂ or Me₂SiCl₂ with 3, 3'-dilithio-2, 2'-binaphthalene then yielded the multi-substituted silole. Nuclear magnetic resonance spectroscopy and high-resolution mass spectrometry were used to characterize the structures of the siloles. Their optical and electronic properties were investigated using ultraviolet-visible absorption spectroscopy, photoluminescence spectroscopy, cyclic voltammetry, and density functional theory calculations. The dinaphthalene-fused siloles exhibited similar absorption and emission peaks. Their deep highest occupied molecular orbital level at approximately -5.5 eV indicated that they were chemically stable. Differential scanning calorimetry and thermogravimetric analysis indicated that the siloles were stable up to 309℃. A multilayer electroluminescent device was fabricated using 1, 2, 3, 4, 8, 9, 10, 11-octabutyl-6, 6-dimethyl-6H-dinaphtho[2, 3-b:2', 3'-d]silole as a light-emitting layer. The resulting device produced bright blue emission, indicating that these siloles may be suitable materials in organic light-emitting devices.     

The role of Zn-OR and Zn-OH nucleophiles and the influence of para-substituents in the reactions of binuclear phosphatase mimetics

Analogues of the ligand 2,2'-(2-hydroxy-5-methyl-1,3-phenylene)bis(methylene)bis((pyridin-2-ylmethyl)azanediyl)diethanol (CH(3)H(3)L1) are described. Complexation of these analogues, 2,6-bis(((2-methoxyethyl)(pyridin-2-ylmethyl)amino)methyl)-4-methylphenol (CH(3)HL2), 4-bromo-2,6-bis(((2-methoxyethyl)(pyridin-2-ylmethyl)amino)methyl)phenol (BrHL2), 2,6-bis(((2-methoxyethyl)(pyridin-2-ylmethyl)amino)methyl)-4-nitrophenol (NO(2)HL2) and 4-methyl-2,6-bis(((2-phenoxyethyl)(pyridin-2-ylmethyl)amino)methyl)phenol (CH(3)HL3) with zinc(II) acetate afforded [Zn(2)(CH(3)L2)(CH(3)COO)(2)](PF(6)), [Zn(2)(NO(2)L2)(CH(3)COO)(2)](PF(6)), [Zn(2)(BrL2)(CH(3)COO)(2)](PF(6)) and [Zn(2)(CH(3)L3)(CH(3)COO)(2)](PF(6)), in addition to [Zn(4)(CH(3)L2)(2)(NO(2)C(6)H(5)OPO(3))(2)(H(2)O)(2)](PF(6))(2) and [Zn(4)(BrL2)(2)(PO(3)F)(2)(H(2)O)(2)](PF(6))(2). The complexes were characterized using (1)H and (13)C NMR spectroscopy, mass spectrometry, microanalysis, and X-ray crystallography. The complexes contain either a coordinated methyl- (L2 ligands) or phenyl- (L3 ligand) ether, replacing the potentially nucleophilic coordinated alcohol in the previously reported complex [Zn(2)(CH(3)HL1)(CH(3)COO)(H(2)O)](PF(6)). Functional studies of the zinc complexes with the substrate bis(2,4-dinitrophenyl) phosphate (BDNPP) showed them to be competent catalysts with, for example, [Zn(2)(CH(3)L2)](+), k(cat) = 5.70 ± 0.04 × 10(-3) s(-1) (K(m) = 20.8 ± 5.0 mM) and [Zn(2)(CH(3)L3)](+), k(cat) = 3.60 ± 0.04 × 10(-3) s(-1) (K(m) = 18.9 ± 3.5 mM). Catalytically relevant pK(a)s of 6.7 and 7.7 were observed for the zinc(II) complexes of CH(3)L2(-) and CH(3)L3(-), respectively. Electron donating para-substituents enhance the rate of hydrolysis of BDNPP such that k(cat)p-CH(3) > p-Br > p-NO(2). Use of a solvent mixture containing H(2)O(18)/H(2)O(16) in the reaction with BDNPP showed that for [Zn(2)(CH(3)L2)(CH(3)COO)(2)](PF(6)) and [Zn(2)(NO(2)L2)(CH(3)COO)(2)](PF(6)), as well as [Zn(2)(CH(3)HL1)(CH(3)COO)(H(2)O)](PF(6)), the (18)O label was incorporated in the product of the hydrolysis suggesting that the nucleophile involved in the hydrolysis reaction was a Zn-OH moiety. The results are discussed with respect to the potential nucleophilic species (coordinated deprotonated alcohol versus coordinated hydroxide).     

Synthesis and characterization of a family of structurally characterized dysprosium alkoxides for improved fatigue-resistance characteristics of PDyZT thin films

Using either an ammoniacal route, the reaction between DyCl3, Na0, and HOR in liquid ammonia, or preferentially reacting Dy(N(SiMe3)2)3 with HOR in a solvent, we isolated a family of dysprosium alkoxides as [Dy(mu-ONep)2(ONep)]4 (1), (ONep)2Dy[(mu3-ONep)(mu-ONep)Dy(ONep)(THF)]2(mu-ONep) (2), (ONep)2Dy[(mu3-ONep)(mu-ONep)Dy(ONep)(py)]2(mu-ONep) (3), [Dy3(mu3-OBut)2(mu-OBut3(OBut)4(HOBut)2] (4), [Dy3(mu3-OBut)2(mu-OBut)3(OBut)4(THF)2] (5), [Dy3(mu3-OBut)2(mu-OBut)3(OBut)4(py)2] (6), (DMP)Dy(mu-DMP)4[Dy(DMP)2(NH3)]2 (7), [Dy(eta6-DMP)(DMP)2]2 (8), Dy(DMP)3(THF)3 (9), Dy(DMP)3(py)3 (10), Dy(DIP)3(NH3)2 (11), [Dy(eta6-DIP)(DIP)2]2 (12), Dy(DIP)3(THF)2 (13), Dy(DIP)3(py)3 (14), Dy(DBP)3(NH3) (15), Dy(DBP)3 (16), Dy(DBP)3(THF) (17), Dy(DBP)3(py)2 (18), [Dy(mu-TPS)(TPS2]2 (19), Dy(TPS)3(THF)3 (20), and Dy(TPS)3(py)3 (21), where ONep = OCH2CMe3, OBut) = OCMe3, DMP = OC6H3(Me)(2)-2,6, DIP = OC6H3(CHMe2)(2)-2,6, DBP = OC6H3(CMe3)(2)-2,6, TPS = OSi(C6H5)3, tol = toluene, THF = tetrahydrofuran, and py = pyridine. We were not able to obtain X-ray quality crystals of compounds 2, 8, and 9. The structures observed and data collected for the Dy compounds are consistent with those reported for its other congeners. A number of these precursors were used as Dy dopants in Pb(Zr0.3Ti0.7)O3 (PZT 30/70) thin films, with compound 12 yielding the highest-quality films. The resulting Pb0.94Dy0.04(Zr0.3Ti0.7)O3 [PDyZT (4/30/70)] had similar properties to PZT (30/70), but showed substantial resistance to polarization reversal fatigue.     

Synthesis and Characterization of Sterically Encumbered Derivatives of Aluminum Hydrides and Halides: Assessment of Steric Properties of Bulky Terphenyl Ligands

The synthesis and characterization of several sterically encumbered monoterphenyl derivatives of aluminum halides and aluminum hydrides are described. These compounds are [2,6-Mes(2)C(6)H(3)AlH(3)LiOEt(2)](n)() (1), (Mes = 2,4,6-Me(3)C(6)H(2)-), 2,6-Mes(2)C(6)H(3)AlH(2)OEt(2) (2), [2,6-Mes(2)C(6)H(3)AlH(2)](2) (3), 2,6-Mes(2)C(6)H(3)AlCl(2)OEt(2) (4), [2,6-Mes(2)C(6)H(3)AlCl(3)LiOEt(2)](n)() (5), [2,6-Mes(2)C(6)H(3)AlCl(2)](2) (6), TriphAlBr(2)OEt(2) (7), (Triph = 2,4,6-Ph(3)C(6)H(2)-), [2,6-Trip(2)C(6)H(3)AlH(3)LiOEt(2)](2) (8) (Trip = 2,4,6-i-Pr(3)C(6)H(2)-), 2,6-Trip(2)C(6)H(3)AlH(2)OEt(2) (9), [2,6-Trip(2)C(6)H(3)AlH(2)](2) (10), 2,6-Trip(2)C(6)H(3)AlCl(2)OEt(2) (11), and the partially hydrolyzed derivative [2,6-Trip(2)C(6)H(3)Al(Cl)(0.68)(H)(0.32)(&mgr;-OH)](2).2C(6)H(6) (12). The structures of 2, 3a, 4, 6, 7, 9a, 10a, 10b, 11, and 12 were determined by X-ray crystallography. The structures of 3a, 9a, 10a, and 10b, are related to 3, 9, and 10, respectively, by partial occupation of chloride or hydride by hydroxide. The compounds were also characterized by (1)H, (13)C, (7)Li, and (27)Al NMR and IR spectroscopy. The major conclusions from the experimental data are that a single ortho terphenyl substituent of the kind reported here are not as effective as the ligand Mes (Mes = 2,4,6-t-Bu(3)C(6)H(2)-) in preventing further coordination and/or aggregation involving the aluminum centers. In effect, one terphenyl ligand is not as successful as a Mes substituent in masking the metal through agostic and/or steric effects.     

Use of bifunctional phosphonates for the preparation of heterobimetallic 5f-3d systems

The hydrothermal reaction of phosphonoacetic acid (H2PO3CH2C(O)OH, PAA) with UO3 and Cu(C2H3O2)2 .H2O results in the formation of the crystalline heterobimetallic uranium(VI)/copper(II) phosphonates UO2Cu(PO3CH2CO2)(OH)(H2O)2 ( UCuPAA-1), (UO2) 2Cu(PO3CH2CO2)2(H2O)3 (UCuPAA-2), and [H3O][(UO2) 2Cu2(PO3CH2CO2)3(H2O)2 ( UCuPAA-3). The addition of sodium hydroxide to the aforementioned reactions results in the formation of Na[UO2(PO3CH2CO2)].2H2O (NaUPAA-1). These compounds display 1D (UCuPAA-1), 2D (UCuPAA-2, NaUPAA-1), and 3D (UCuPAA-3) architectures wherein the phosphonate portion of the ligand primarily coordinates the uranium(VI) centers; whereas the carboxylate moiety preferentially, but not exclusively, binds to the copper(II) ions. Fluorescence measurements on all four compounds demonstrate that the presence of copper(II) mostly quenches the emission from the uranyl moieties.     

Structural diversity of the oxovanadium organodiphosphonate system: a platform for the design of void channels

The hydrothermal reactions of a vanadium source, an appropriate diphosphonate ligand, and water in the presence of HF provide a series of compounds with neutral V-P-O networks as the recurring structural motif. When the {O3P(CH2)(n)PO3}4- diphosphonate tether length n is 2-5, metal-oxide hybrids of type 1, [V2O2(H2O){O3P(CH2)(n)PO3}] x xH2O, are isolated. The type 1 oxides exhibit the prototypical three-dimensional (3-D) "pillared" layer architecture. When n is increased to 6-8, the two-dimensional (2-D) "pillared" slab structure of the type 2 oxides [V2O2(H2O)4{O3P(CH2)6PO3}] is encountered. Further lengthening of the spacer to n = 9 provides another 3-D structure, type 3, constructed from the condensation of pillared slabs to give V-P-O double layers as the network substructure. When organic cations are introduced to provide charge balance for anionic V-P-O networks, oxides of types 4-7 are observed. For spacer length n = 3, a range of organodiammonium cations are accommodated by the same 3-D "pillared" layer oxovanadium diphosphonate framework in the type 4 materials [H3N(CH2)(n)NH3][V4O4(OH)2 {O3P(CH)3PO3}2] x xH2O [n = 2, x = 6 (4a); n = 3, x = 3 (4b); n = 4, x = 2 (4c); n = 5, x = 1 (4d); n = 6, x = 0.5 (4e); n = 7, x = 0 (4f)] and [H3NR]y[V4O4(OH)2 {O3P(CH)3PO3}2] x xH2O [R = -CH2(NH3)CH2CH3, y = 1, x = 0 (4g); R = -CH3, n = 2, x = 3 (4h); R = -CH2CH3, y = 2, x = 1 (4i); R = -CH2CH2CH3, y = 2, x = 0 (4j); cation = [H2N(CH2CH3)2], y = 2, x = 0 (4k)]. These oxides exhibit two distinct interlamellar domains, one occupied by the cations and the second by water of crystallization. Furthermore, as the length of the cation increases, the organodiammonium component spills over into the hydrophilic domain to displace the water of crystallization. When the diphosphonate tether length is increased to n = 5, structure type 5, [H3N(CH2)2NH3][V4O4(OH)2(H2O){O3P(CH2)5PO3}2] x H2O, is obtained. This oxide possesses a 2-D "pillared" network or slab structure, similar in gross profile to that of type 2 oxides and with the cations occupying the interlamellar domain. In contrast, shortening the diphosphonate tether length to n = 2 results in the 3-D oxovanadium organophosphonate structure of the type 7 oxide [H3N(CH2)5NH3][V3O3{O3P(CH2)2PO3}2]. The ethylenediphosphonate ligand does not pillar V-P-O networks in this instance but rather chelates to a vanadium center in the construction of complex polyhedral connectivity of 7. Substitution of piperazinium cations for the simple alkyl chains of types 4, 5, and 7 provides the 2-D pillared layer structure of the type 6 oxides, [H2N(CH2CH2)NH2][V2O2{O3P(CH)(n)PO3H}2] [n = 2 (6a); n = 4 (6b); n = 6 (6c)]. The structural diversity of the system is reflected in the magnetic properties and thermal behavior of the oxides, which are also discussed.     

Synthesis and reactivity of dichloroboryl complexes of platinum(II)

The reaction between [Pt(nbe)3] (nbe=norbornene), two equivalents of the phosphines PPh3, PMePh2 or PMe2Ph and 1 equivalent of BCl3 affords the platinum dichloroboryl species [PtCl(BCl2)(PPh3)2], [PtCl(BCl2)(PMePh2)2] and [PtCl(BCl2)(PMe2Ph)2]. All three complexes were characterised by X-ray crystallography and reveal that the boryl group lies trans to the chloride. With PMe3 as the phosphine, the complex [PtCl(BCl2)(PMe3)2] is isolated in high yield as a white crystalline powder although crystals suitable for X-ray crystallography were not obtained. Crystals were obtained of a product shown by X-ray crystallography to be the unusual dinuclear species [Pt2(BCl2)2(PMe3)4(micro-Cl)][BCl4] which reveals an arrangement in which two square planar platinum(II) centres are linked by a single bridging chloride which is trans to a BCl2 group on each platinum centre. The reaction of [PtCl(BCl2)(PMe3)2] with NEt3 or pyridine (py) affords the adducts [PtCl{BCl2(NEt3)}(PMe3)2] and [PtCl{BCl2(py)}(PMe3)2], respectively, both characterised spectroscopically. The reaction between [PtCl(BCl2)(PMe3)2] and either 4 equivalents of NHEt2 or piperidine (pipH) results in the mono-substituted boryl species [PtCl{BCl(NEt2)}(PMe3)2] and [PtCl{BCl(pip)}(PMe3)2], respectively, the former characterised by X-ray crystallography. Treatment of either [PtCl(BCl2)(PMe3)2] (in the presence of excess NEt3) or [PtCl{BCl(NEt2)}(PMe3)2] with catechol affords the B(cat) (cat=catecholate) derivative [PtCl{B(cat)}(PMe3)2] which is also formed in the reaction between [Pt(PMe3)4] and ClB(cat) and also from the slow decomposition of [Pt{B(cat)}2(PMe3)2] in dichloromethane over a period of months. The compound [Pt{B(cat)}2(PMe3)2] was prepared from the reaction between [Pt(PMe3)4] and B2(cat)2.     

Neutral and cationic aluminium complexes of a sterically demanding N-imidoylamidine ligand

The N-imidoylamidine ligand i-Pr2C6H3N(C(Me)NC6H3i-Pr2)2 2 was prepared. Direct reactions with AlI3 or AlMe3 afforded [(i-Pr2C6H3N(C(Me)NC6H3i-Pr2)2)AlI2][AlI4] 3 and [i-Pr2C6H3N(C(Me)NC6H3i-Pr2)2)AlMe2][AlMe4].AlMe3, 4 respectively. Thermolysis of 4 gave (i-Pr2C6H3NC(=CH2)(NC6H3i-Pr2)(C(Me)NC6H3i-Pr2)AlMe2 6. Subsequent reaction with B(C6F5)3 gave the zwitterionic species [(i-Pr2C6H3)N(C(=CH2)NC6H3i-Pr2)(C(Me)NC6H3i-Pr2)AlMe(mu-MeB(C6F5)3)] 7. In a related reactions of 2, [Ph3C][B(C6F5)4] and AlMe3, AlH3.NEtMe2 or AlD3.NMe3, the complexes [(i-Pr2C6H3N(C(Me)NC6H3i-Pr2)2)AlR2][B(C6F5)4] (R = Me 5, H 8, D 9) and [(i-Pr2C6H3)N(C(=CH2)NC6H3i-Pr2)(C(Me)NC6H3i-Pr2)AlH][B(C6F5)4] 10 are formed. Single-crystal X-ray data for 2, 3, 5 and 10 are reported.