Conversion of 1,3-thiazolidine and its sulfoxide to dihydro-1,4-thiazine

Two methods for constructing dihydro-1,4-thiazine 4 were described. 1,3-Thiazolidines 5 were converted to dihydro-1,4-thiazines 4 by chlorinolysis through the unisolable chlorosulfonium salt 10 and sulfenyl chloride 11 . Oxidation of the sulfides 5 gave a mixture of pairs of diasteromers 6 . In the presence of acid catalyst, both sulfoxides were converted to dihydrothiazine 4 through sulfenic acid 22 . In this reaction the stepwise ring opening involving carbocation 23 seems more probable. The structures of 4 were proven by the independent synthesis involving 3-bromo-2-oxobutanoic acid derivatives.     

99mTc-labeling and biodistribution studies of some dihydro-1,4-thiazine and 1,3-thiazolidine-carboxylic acid derivatives

Cephalosporanic acids (CEPHAs) such as dihydro-1,4-thiazine derivatives and 2-hydroxyalkyl-1,3-thiazolidine-4-carboxylic-acids, (HOTCAs) are both important biologically active molecules and complexing agents for several metals such as Fe, Zn, Pb, etc. The simplest way for the study of the effect of complex formation upon the biochemistry of these compounds requires radiolabeled complexes. As^99mTc radioisotope gives the best opportunity for imaging the in vivo process,^99mTc-CEPHAs and HOTCAs were prepared and investigated. It was found that biologically active molecules like CEPHAs and HOTCAs can be labeled with^99mTc with good radiochemical yields. In case of one CEPHA compound, low but definite myocardial uptake was observed, while 3 of the HOTCAs showed characteristic renal uptake and wash-out without visualization of any other organs than the urinary tract.     

Preparation of diastereomeric 5,8-methanobenzoxazino[2,1–6]- and [2,3–6]-1,3-benzoxazin-4-ones by reaction of norbornane/ene-condensed dihydro-1,3-oxazines with salicyl chloride

Norbornane and norbornene-condensed dihydro-1,3-oxazines 1–6 were converted with salicyl chloride to 5,8-methanobenzoxazino[2,1–6]- and -[2,3-b]-1,3-benzoxazin-4-ones 7–12. The addition takes place to the C ? N bond: after acylation, the intermediate is stabilized through cyclization to the aryl-substituted carbon by hydrogen chloride elimination. Diastereomers containing the oxazine rings in isomeric positions could be isolated in two cases. This is the first example of the isolation of diastereomers in such a salicyl chloride reaction. In contrast with earlier findings with reactions of related systems, no addition to the C ? C bond could be observed. The steric structures of the compounds were elucidated by ir, ¹H- and ¹³C-nmr spectroscopy.     

Pyrimidines. XIX. Pyrimido[4,5-e]dihydro-1,3-oxazines and related compounds

A number of 2-substituted 4,5-dihydroxy-6-(substituted aminomethyl)pyrimidines (VIII) were prepared from the corresponding 2-substituted 4,5-dihydroxypyrimidines (VII) by a new pyrimidine Mannich reaction. The structure of VIII was proved by an independent synthesis. Further study of this reaction led to the synthesis of a new class of compounds: the pyrimido[4,5-e]dihydro-1,3-oxazines (VI).     

Synthesis of 1,4-dinitro-1,3-b utadiene

Summary A method is proposed for the synthesis of 1,4-dinitro-1,3-butadiene.     

Synthesis of substituted salicylamines and dihydro-2H-1,3-benzoxazines

Phenols were converted to their magnesium salts with the MgCl₂-Et₃N base system and subsequently reacted with Eschenmoser's salt, affording N,N-dimethyl substituted benzylamines in high to excellent yields. A series of mono N-substituted benzylamines were prepared in one-pot syntheses by ortho-formylation of phenols to corresponding salicylaldehydes, which in turn reacted with amines to imines. The imines were subsequently reduced to mono N-substituted benzylamines. Some of these benzylamines were further converted, without work-up, to mono N-substituted dihydro-2H-1,3-benzoxazines.     

Ring transformations of β-lactam-condensed 1,3-benzothiazines to isoquinoline and thiazole derivatives by sulfur extrusion and addition sequences

The ring transformations of dichloro-β-lactam-fused 2-aryl-1,3-benzothiazines with sodium methoxide were investigated. With 2 equiv of base, the dichloro-β-lactam derivatives underwent rearrangement and dihydro-1,4-benzothiazepines, 3,4-substituted isoquinolines and substituted thiazole disulfides were isolated. A possible reaction mechanism is proposed for the simultaneous formation of the novel products. The formation of isoquinoline and thiazole derivatives can be explained by sulfur extrusion and addition sequences.     

Sequential cross-coupling of 1,4-bissilylbutadienes: synthesis of unsymmetrical 1,4-disubstituted 1,3-butadienes

A mild and general and stereospecific cross-coupling reaction of unsymmetrical 1,4-bissilyl-1,3-butadienes has been accomplished. By the use of either a benzyldimethylsilyl or 2-thienyldimethylsilyl unit at one end of the dienylsilanol, a selective cross-coupling could be effected under mildly basic conditions (KOTMS) to afford 4-aryl-1,3-dienylsilanes in excellent yield for a wide range of aryl and alkenyl coupling partners. The second cross-coupling could be effected cleanly by the action of TBAF with electron-rich or electron-poor halides. The sequential process could be telescoped into a "one pot" procedure with overall excellent yields of the unsymmetrical 1,4-diaryl-1,3-butadienes.     

Synthesis of 1,2- and 1,4-amino alcohols from 1,3-dienes via oxazines. Rearrangements of 1,4-amino alcohol derivatives to oxazolines

Conjugated dienes were converted to 1,2-oxazines by reaction with an acyl nitroso dienophile. The oxazines were reduced to 1,4-N-acetylamino alcohols, which were rearranged to the corresponding oxazolines upon treatment with methanesulfonyl chloride or anhydride. The oxazolines yielded 1,2-N-acetylamino alcohols upon hydrolysis. Thus either 1,4- or 1,2-N-acetylamino alcohols are available from 1,3-dienes via this methodology. Experimental and spectral data are provided for all new compounds.     

Preparation of partially substituted 1-halo- and 1,4-dihalo-1,3-dienes via reagent-controlled desilylation of halogenated 1,3-dienes

Depending on the desilylation reagents used, 1-halo-1,4-bis(trimethylsilyl)-1,3-butadienes afforded either 1-halo-1-trimethylsilyl-1,3-butadienes or 1-halo-4-trimethylsilyl-1,3-butadienes in excellent yields with excellent selectivity, respectively, when treated with CF3COOH or with NaOMe. These monosilylated 1,3-butadiene products could be further desilylated to generate their corresponding halobutadienes via the above reagent-controlled desilylation reaction. When 1,4-dihalo-1,4-bis(trimethylsilyl)-1,3-dienes were treated with MeONa/MeOH at room temperature, desilylation of both of the two trimethylsilyl groups took place to afford their corresponding 1,4-dihalo-1,3-dienes in excellent yields. The commonly used desilylation reagent CF3COOH did not work for these dihalobutadienes.     

Pi-stacking interactions in some crystalline cisoid E,E-1,4-diaryl-1,3-butadienes

A cisoid E,E-1,4-diperfluorophenyl-1,3-butadiene has been prepared in which offset stacking between perfluorophenyl-perfluorophenyl rings occurs, and face-to-face stacking between phenyl-perfluorophenyl rings is found in crystals of its 1:1 complex with a cisoid E,E-1,4-diphenyl-1,3-butadiene.     

Cycloadditions of 1,4-Bis-Trimethyl-siloxy-1,3-cyclohexadiene

The cycloaddition reactions of 1,4-bis-trimethylsiloxy-1,3-cyclohexadiene with maleic anhydride, dimethyl acetylenedicarboxylate, diethylfumarate and methyl acrylate have been studied. The moderate to good yields obtained in these reactions indicate that this diene will be useful in the synthesis of 1,4-bis-oxygenated bicyclo[2.2.2]-octanes.     

Electron impact induced fragmentation of dihydro-1,4-dithiines. 2,3-Substituted 5,6-dihydro-l,4-dithiines

In the electron impact induced fragmentation of 2,3-disubstituted 5,6-dihydro-1,4-dithiines, the most important cleavage of the heterocyclic ring occurs via the retro-Diels-Alder type of reaction. The further fragmentation of the resulting radical cation gives rise to substitutes thiocarbonyl cations. This fragmentation favours formations of ions in which the electron-deficient carbon-sulphur triple bond is stabilized by an electron-releasing group. The ring fragmentation was observed to be dependent on the nature of the 3- and 2-substituents of the ring when a series of 3- and 2-substituted 5,6-dihydro-l,4-dithiines was investigated. The fragmentation of dihydro-l,4-dithiines partly resembles the fragmentation of the corresponding dihydro-l,4-oxathiines. The presence of the two sulphur atoms in dihydro-l,4-dithiines give rise to more stable molecular ions than observed in the case of the dihydro-1,4-oxathiine analogues. Fragmentations of dihydro-l,4-dithiines can also involve extrusions of alkylradicals or HS-radical from the heterocyclic rings of molecular ions.     

NIEDERKOORDINIERTE PHOSPHORVERBINDUNGEN, 701 1-METALLA-2,5-DIPHOSPHA PENTA-1,3-DIENE DURCH 1,4-ADDITION VON METALLCARBONYLCYCLOPENTADIENYLHYDRIDEN AN 1,4-DIPHOSPHABUTA-1,3-DIEN

Abstract

Reactions of carbonyl cyclopentadienyl hydrides from molybdenum and tungsten with 1,4-diphosphabuta-1,3-diene yield metalla-diphospha-pentadiene with a metal-phosphorus-double bond.

Metalla-diphosphapentadiene mit einer Metall-Phosphor-Doppelbindung werden durch Umsetzung von Carbonylcyclopentadienylhydriden des Molybdäns und Wolframs mit einem 1,4-Diphospha-buta-1,3-dien erhalten.     

A Convenient and Efficient Route to 1,4-Bis（heteroaryl）-buta-1,3-diene and 4-Heteroarylbut-1-en-3-yne from 1,4-Dichlorobut-2-yne

A convenient and practical route to functionalized conjugated 1,3-enynes and 1,3-dienes is described. 1,4-Bis（heteroaryl）- 1,3-diene and 1-heteroarylbut- 1-en-3-yne derivatives were prepared from 1,4-dichloro-2-butyne and corresponding N-heteroarenes such as imidazole, pyrrole, pyrazole and indole derivatives in the presence of bases in good to high yields.     

Highly efficient synthesis of stereodefined multisubstituted 1,4-dicyano- and 1-cyano-1,3-butadienes and their reactions with organolithium reagents

Stereodefined multisubstituted 1-cyano- and 1,4-dicyano-1,3-butadiene derivatives were obtained in excellent yields of the isolated product from their corresponding monohalo- and dihalobutadienes and CuCN. This reaction proceeded with high stereoselectivity and retention of the stereochemistry of the starting halobutadienes. A study of the utility of the thus-obtained 1-cyano- and 1,4-dicyano-1,3-butadiene derivatives was demonstrated by their reactions with organolithium reagents. 2H-Pyrrole or iminocyclopentadiene derivatives were formed in high yields from 1-cyano-4-halo-1,3-butadienes and organolithium reagents. When 1,4-dicyano-1,3-butadienes were treated with organolithium reagents followed by trapping with electrophiles, a tandem process took place to afford 2H-pyrrolyl nitriles in excellent yields. Reduction of 1,4-dicyano-1,3-butadiene derivatives with LiAlH4 showed novel reaction patterns relative to normal nitriles.     

A convergent multipole expansion for 1,3 and 1,4 Coulomb interactions

Traditionally force fields express 1,3 and 1,4 interactions as bonded terms via potentials that involve valence and torsion angles, respectively. These interactions are not modeled by point charge terms, which are confined to electrostatic interactions between more distant atoms (1,n where n>4). Here we show that both 1,3 and 1,4 interactions can be described on the same footing as 1,n (n>4) interactions by a convergent multipole expansion of the Coulomb energy of the participating atom pairs. The atomic multipole moments are generated by the theory of quantum chemical topology. The procedure to make the multipole expansion convergent is based on a "shift procedure" described in earlier work [L. Joubert and P. L. A. Popelier, Molec. Phys. 100, 3357 (2002)].     

Polyaromatic ether-ketone-sulfones containing 1,3-butadiene units

The acid chloride of 1,4-bis-p-carboxyphenyl-1,3-butadiene (XI) and isophthaloyl chloride (XIV) were polymerized with 4,4′-diphenoxy-diphenyl sulfone (XII) and diphenyl ether (XIII) in a Friedel-Crafts type of polymerization. The polymers obtained, which contained 5–20 mole % of butadiene units, were insoluble in all solvents. The polyamides prepared from the acid chloride of 1,4-bis-p-carboxyphenyl-1,3-butadiene (XI) and aromatic diamines were also insoluble in all solvents.     

1,4-Diazabuta-1,3-dien-N-Sulfinylamin-Nickel(0)-Komplexe

1,4-Diazabuta-1,3-Diene-N-Sulfinylamin Nickel(0) Complexes Synthesis, properties, and reactions of 1,4-diazabuta-1,3-diene-N-sulfinylamine nickel(0) complexes are described. The highly coloured and extremely air and moisture sensitive nickel(0) complexes have been characterized by means of i.r. and ¹H n.m.r.spectroscopy. The N-sulfinylamine ligands are η²-(S,N)-side on coordinated.     

Metallocene polymers XXVII. 1,3-terferrocenyl

The synthesis of 1,3-terferrocenyl (1,3-diferrocenylferrocene) is accomplished by acylation of ferrocene with 3-(ethoxycarbonyl)propionyl chloride under Friedel-Crafts conditions, followed by condensation of the resulting [3-(ethoxycarbonyl)propionyl]ferrocene with acetylferrocene in the presence of potassium tert-butoxide. The intermediary diferrocenyl(ethoxycarbonyl)cyclopentadiene (not isolated) is hydrolysed and decarboxylated in boiling aqueous alkali, yielding 1,4-diferrocenylcyclopentadiene. The latter, as the sodium salt, is allowed to react with ferrous chloride in tetrahydrofuran in the presence of excess sodium cyclopentadienide, producing 1,3-terferrocenyl in addition to large quantities of ferrocene. Both the terferrocenyl and its precursor, 1,4-diferrocenylcyclopentadiene, are characterized by IR, UV, PMR, and analytical data.