On the nature and reactivity of Cp2TiCH3

Reaction of Cp₂TiCl with 1 eq. of CH₃Li in ether at ?78°C yields the green, thermally unstable, trivalent Ti compound Cp₂TiCH₃. EPR studies on ether solutions of this compound reveal it to be present in solution as the adduct Cp₂TiCH₃ · OEt₂ · By reaction with DCl Cp₂TiCl₂ and CH₃D are formed. Reaction with 2,6 xylylisocyanide leads to insertion of the isocyanide into the TiCH₃ bond, while reaction with CS₂ yields the disproportionation products Cp₂-Ti(CH₃)₂ and Cp₂TiCS₂. Thermal decomposition studies on deuteriated analogues confirm the TiCH₃ structure. The rate determining step in the decomposition process is the abstraction of a Cp proton by the methyl group. Under nitrogen the decomposition reaction yields NH₃ and N₂H₄ in amounts of up to 0.28 moles N/Ti. Some catalytic applications of Cp₂TiCH₃ for hydrogenation and isomerisation of olefins and acetylenes are briefly mentioned.     

Ethylene polymerization with homogeneous Ziegler-Natta catalysts: theoretical study on the role of ion pairs in the polymerization mechanism

The thermodynamics of the reaction of an ethylene molecule with the Cp₂TiCH₃Cl/Al(CH₃)₂Cl system (Cp = η₅-C₅H₅), as a model for olefin polymerization with homogeneous Ziegler-Natta catalysts, was investigated via quantum mechanical DFT calculations. The comparison of the calculated energies for three possible titanium-olefin coordinated intermediates, the ionic complex Cp₂TiCH₃(C₂H₄)⁺/Al(CH₃)₂Cl, the bimetallic complex Cp₂TiCH₃(C₂H₄)^δ+ · Al(CH₃)₂Cl and the olefin-separated ion pair Cp₂TiCH/C₂H₄/Al(CH₃)₂Cl, shows that the most feasible polymerization mechanism occurs via olefin-separated ion pair.     

Chemistry of organosilicon compounds: CIV. Syntheses of novel organoelement heterocycles containing titanium and silicon

Four new dicyclopentadienyltitanium(IV) metallocycles, Cp₂TiCH₂XCH₂ (X = SiMe₂OSiMe₂, SiMe₂CH₂SiMe₂, SiMe₂SiMe₂, and SiMe₂SiMe₂SiMe₂) are prepared and characterized.     

Etude sur les composés organométalliques. XVIII. Synthèse et caractérisation du μ-oxo-bis (dicyclopentadiènylméthyltitane IV)

Studies of Organometallic Compounds. XVII: Synthesis and Caracterisation of μ-oxo-bis(dicyclopentadienylmethyltitane IV) (Cp₂TiCH₃)₂O is obtained by reacting (Cp₂TiCl)₂O with methyllithium. IR., NMR. and MS. spectrum are reported. Autocatalytic decomposition of the product is inferred from differential thermal analytic measurements.     

A Facile Preparation of Tebbe Reagent and its Subsequent Reactions

A facile preparation of Tebbe reagent (1) by reacting AlMe₃ solution with Cp₁TiCl₂ is reported. After complete removal of solvent and excess of AlMe₃, the crude Tebbe reagent could be used without purification to react with ketones in a Wittig-type manner.     

The Reduction of Sulfoxides and Active Halides with Cp2TiCl2/Sm System

Cp₂TiCl₂/Samarium system is used as a new reagent for reducing sulfoxides to sulfides, benzyl halides to bibenzyls and α-bromoketones to ketones respectively in good yields under mild and neutral conditions.     

Recent Chemistry Based on the [RuCp(CH3CN)3]+ Cation: Reappraisalof an Old Precursor

 This article gives an overview of recent chemistry based on the tris-acetonitrile complex [RuCp(CH₃CN)₃]⁺. Due to the labile nature of the CH₃CN ligands, substitution reactions are a dominant feature of this complex. Important derivatives are the highly reactive complexes [RuCp(PR ₃)(CH₃CN)₂]⁺ which are a source of the 14e⁻ fragment [RuCp(PR ₃)]⁺. These species are catalytically active in the redox isomerization of allyl alcohols to give aldehydes and ketones. Furthermore, the cationic complex [RuCp(κ¹(P),η²-PPh₂CH₂CH₂CH*CH₂)(CH₃CN)]PF₆ derived from the reaction of [RuCp(CH₃CN)₃]⁺ with PPh₂CH₂CH₂CH*CH₂ is a model compound for studying coupling reactions of olefins and acetylenes. In addition, [RuCp(CH₃CN)₃]⁺ is a valuable precursor for the synthesis of configurationally stable chiral three-legged piano-stool ruthenium complexes. These are currently being intensively investigated as Lewis acid catalysts in asymmetric synthesis.     

Recent Chemistry Based on the [RuCp(CH3CN)3]+ Cation: Reappraisalof an Old Precursor

Summary.  This article gives an overview of recent chemistry based on the tris-acetonitrile complex [RuCp(CH₃CN)₃]⁺. Due to the labile nature of the CH₃CN ligands, substitution reactions are a dominant feature of this complex. Important derivatives are the highly reactive complexes [RuCp(PR ₃)(CH₃CN)₂]⁺ which are a source of the 14e⁻ fragment [RuCp(PR ₃)]⁺. These species are catalytically active in the redox isomerization of allyl alcohols to give aldehydes and ketones. Furthermore, the cationic complex [RuCp(κ¹(P),η²-PPh₂CH₂CH₂CH*CH₂)(CH₃CN)]PF₆ derived from the reaction of [RuCp(CH₃CN)₃]⁺ with PPh₂CH₂CH₂CH*CH₂ is a model compound for studying coupling reactions of olefins and acetylenes. In addition, [RuCp(CH₃CN)₃]⁺ is a valuable precursor for the synthesis of configurationally stable chiral three-legged piano-stool ruthenium complexes. These are currently being intensively investigated as Lewis acid catalysts in asymmetric synthesis. Received May 31, 2000. Accepted June 13, 2000     

Preparation,characterization and reactivity of Cp2M(PMe3)2 complexes (M = Ti,Zr): the molecular structure of Cp2Zr(PMe3)2

The reduction of Cp₂MCl₂ (M = Ti, Zr) with magnesium in THF in the presence of PMe₃ affords the complexes Cp₂M(PMe₃)₂ in high yields. These compounds lose one or both PMe₃ ligands under very mild conditions. Cp₂Ti(PMe₃)₂ reacts readily with CH₃I, CH₃C(O)Cl, PhSSPh, Me₂PCH₂CH₂PMe₂, CO, RCN (R = Me, t-Bu) or (RN)₂S (R = t-Bu, Me₃Si) to give the corresponding titanocene products. The structure of Cp₂Zr(PMe₃)₂ has been determined by X-ray diffraction; the structural parameters are similar to those of the titanium analog Cp₂Ti(PMe₃)₂ except that the Zr-P and Zr-C distances are longer.     

Living ring‐opening polymerization of ϵ‐caprolactone with Ti alkoxides derived from the Cp2TiCl‐catalyzed SET reduction of aldehydes

A series of substituted benzaldehydes were investigated as initiators for the living ring‐opening polymerization (LROP) of ε‐caprolactone (CL) mediated by titanium alkoxides obtained from the Cp₂TiCl‐catalyzed single electron transfer (SET) reduction of the carbonyl group following the in situ reduction of Cp₂TiCl₂ with Zn. The aldehyde initiation was demonstrated (NMR) by the presence of the initiator derived fragment on the polycaprolactone (PCL) chain end. The effect of the nature of the aldehyde functionality (R‐Ph‐CHO, R = H, Cl, PhCH₂O, NMe₂, CH₃O, NO₂, and CHO), reagent ratios ([CL]/[aldehyde] = 50/1 to 400/1, [aldehyde]/[Cp₂TiCl₂] = 1/1 to 1/4, and [Cp₂TiCl₂]/[Zn] = 1/0.5 to 1/2), and temperature (T = 75–120 °C) was investigated over a wide range of values to reveal a living polymerization in all cases with an optimum observed at 90 °C with typical stoichiometric ratios of [CL]/[aldehyde]/[Cp₂TiCl₂]/[Zn] = 100/1/1/2. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2869–2877, 2008     

Highly diastereoselective addition of allyltitanocenes to α-chiral ketones

The addition of allyltitanium reagents, generated by the desulfurizative titanation of allylic sulfides with the titanocene(II) reagent Cp₂Ti−1-butene, to α-chiral ketones produced tertiary homoallylic alcohols bearing three adjacent chiral centers with high diastereoselectivity.     

Synthesis and characterization of some bis(cyclopentadienyl)titanium(IV) complexes with internally functionalized oximes(LH): sol–gel transformations of Cp2TiCl2, Cp2TiClL and Cp2TiL2 to nano‐sized anatase titania

Some bis(cyclopentadienyl)titanium(IV) complexes of the type [Cp₂TiCl_2?n{L}_n] {where, n = 1 or 2; L = ONC(R)Ar; R = H or CH₃ and Ar = C₅H₄N‐2, C₄H₃O‐2 or C₄H₃S‐2} have been synthesized by the metathetical reactions of Cp₂TiCl₂ with the sodium salt of internally functionalized oximes in 1:1 and 1:2 stoichiometry in anhydrous THF. All these red to brown colored solid derivatives have been characterized by elemental analyses, FT‐IR and NMR (¹H and ¹³C{¹H}) spectral studies. The FAB mass spectra of some representative derivatives indicate their monomeric nature. Oximato ligands in all the complexes appear to bind the titanium via N and O in a dihapto ( ‐N, O) manner in the solid state. Thermogravimetric curves of [Cp₂TiCl{ONC(CH₃)C₅H₄N‐2}] and [Cp₂Ti{ONC(CH₃)C₅H₄N‐2}₂] suggest the formation of hybrid materials CpTiO(Cl) and Cp₂TiO, respectively, as the final products at 900 °C under nitrogen atmosphere. Sol–gel transformations of Cp₂TiCl₂, [Cp₂TiCl{ONC(CH₃)C₅H₄N‐2}] and [Cp₂Ti{ONC(CH₃)C₅H₄N‐2}₂] yielded titania a–c, respectively, at low sintering temperature (600 °C). The powder XRD patterns, IR as well as Raman spectra of all these oxides indicate the formation of nano‐sized anatase phase. The SEM images of titania a–c indicate agglomers like surface morphologies. The absorption spectra of a–c exhibit an energy band gap in the range of 3.47–3.71 eV. Copyright © 2011 John Wiley & Sons, Ltd.     

Infrared spectra and methyl group properties in dicyclopentadienyldimethyl-titanium(IV), -zirconium(IV) and -hafnium(IV)

Infrared spectra are reported for CH₃-, CD₃- and CHD₂-substituted Cp₂MMe₂ (Cp = η⁵-C₅H₅, M = Ti, Zr, Hf) in CCl₄ solution. The isolated CH stretching frequencies, ν(^isCH), measured in the CHD₂ species are lower than any previously observed in methylmetal compounds and the methyl CH bonds in Cp₂HfMe₂ are predicted to be the longest and weakest such bonds yet to have been characterised by this method. The methyl groups in Cp₂ZrMe₂ and Cp₂HfMe₂ have all three CH bonds equal, but in Cp₂TiMe₂ each methyl group contains two strong CH bonds and one weak one. This may be the result of steric overcrowding effects around the relatively small titanium atom. The symmetric deformation δ_s(CH₃) rises with increasing atomic number of the metal atom, the reverse of the trend observed for methyl derivatives of Main Group elements.     

Synthese und Charakterisierung von Metallocen-Chelaten heterocyclischer 1,2-Diselenolate

Synthesis and Characterization of Metallocene Chelates of Heterocyclic 1,2-Diselenolates Synthesis and properties of metallocen diselenolates Cp₂^RML (Cp^R = η⁵-C₅H₄CH₃ (Cp′); η⁵-C₅(CH₃)₄ C₂H₅ (Cp^o)) of titanium(IV) and vanadium(IV) with L = dsit (1,3-dithiole-2-thione-4,5-diselenolate), dsise (1,3-dithiole-2-selone-4,5-diselenolate) dsitse (1,3-thiaselenole-2-selone-4,5-diselenolate) and dsis (1,3-diselenole-2-selone-4,5-diselenolate) are described. The structures of these compounds in solution are discussed using ¹H, ¹³C, ⁷⁷Se NMR and EPR data. Their voltammetric behaviour is investigated in dichloromethane. The activation parameters of the chelate ring inversion of the titanocene diselenolates (Cp₂^RTiL) and the x-ray structures of Cp₂′Ti(dsit), Cp₂^oTi(dsit); Cp₂^oTi(dsise) (2 modifications) and Cp₂^oTi(dsis) are reported.     

Stereoselective formation of phenylthio groups substituted 1-metalla-3-titanacyclobutanes

Desulfurizative titanation of group 14 metal compounds bearing two or four bis(phenylthio)methyl groups with the low-valent titanium reagent Cp₂Ti[P(OEt)₃]₂ produced phenylthio groups substituted 1-metalla-3-titanacyclobutanes stereoselectively. The molecular structures of the titanacycles were unambiguously confirmed by X-ray diffraction analysis.     

Carbonyl methylenation of easily enolizable ketones

An organometallic reagent prepared from CH₂I₂, Zn, and TiCl₄ is effective for methylenation of the title ketones.     

Synthesis and properties of aryldicyclopentadienyltitanium(III) compounds

The synthesis and properties of the compounds Cp₂TiR, with R = C₆H₅, o-, m-, p-CH₃C₆H₄, 2,6-(CH₃)₂C₆H₃, 2,4,6-(CH₃)₃C₆H₂, C₆F₅, CH₂C₆H₅, are described. Chemical and physical properties indicate that the R groups are σ-bonded to the titanium atom. The complexes are monomeric, with one unpaired electron per titanium atom. They are very air sensitive, and vary markedly in thermal stability; some of the compounds react with molecular nitrogen, to give complexes of the general formula (Cp₂TiR)₂N₂. Compounds CP₂TiR with R = alkyl could not be isolated.     

Stereospecific styrene polymerization and ethylene–styrene copolymerization with titanocenes containing a pendant amine donor

A series of monocyclopentadienyl titanium complexes containing a pendant amine donor on a Cp group ( A = CpTiCl₃, B = Cp^NTiCl₃, C = Cp^NTiCl₂TEMPO, for Cp = C₅H₅, Cp^N = C₅H₄CH₂CH₂N(CH₃)₂, and TEMPO = 2,2,6,6‐tetramethylpiperidine‐N‐oxyl) are investigated for styrene homopolymerization and ethylene–styrene (ES) copolymerization. When activated by methylaluminoxane at 70 °C, complexes with the amine group ( B and C ) are active for styrene homopolymerization and afford syndiotactic polystyrene (sPS). The copolymerizations of ethylene and styrene with B and C yield high‐molecular weight ES copolymer, whereas complex A yields mixtures of sPS and polyethylene, revealing the critical role that the pendant amine has on the polymerization behavior of the complexes. Fractionation, NMR, and DSC analyses of the ES copolymers generated from B and C suggest that they contain sPS. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1579–1585, 2010     

Preparation of (η5-C5H5)2Ti alkyl compounds and reactions with unsaturated substrates

Reaction of Cp₂TiCl with RLi (R = ?CH₃, ?C₂H₅, ?n-C₄H₉, ?s-C₄H₉, ?t-C₄H₉) yields the thermally instable Ti^III compounds Cp₂TiR. Reaction of these compounds with 2,6-xylylisocyanide, phenylisocyanate or carbon dioxide results in insertion of these ligands into the Tialkyl bond with formation of iminoacyl, amido and carboxylato derivatives, respectively. In the reaction with ketones a pinacol-type dimerisation is observed.     

Role of ion-pair equilibria in homogeneous Ziegler-Natta olefin polymerization catalysis

By means of a multinuclear NMR study of the complexes formed between AlCl₃ and either Cp₂TiCl₂ or Cp₂Ti(CH₂SiMe₃)Cl in methylene chloride solution, isomeric forms of the resulting 1:1 complexes have been detected. The influence of temperature, concentration, ratio of the titanocene chloride to aluminum chloride and nature of the solvent upon the ¹H, ¹³C and ²⁷Al NMR spectra has been investigated. The spectral changes caused by the foregoing factors give compelling evidence for a equilibrium in such Cp₂Ti(R)Cl · AlCl₃ complexes (R = Cl, CH₂SiMe₃) between contact ion pairs, Cp₂TiR · Cl · AlCl₃, and solvent-separated ion pairs, Cp₂TiR⁺ AlCl₄⁻. Upon experimental variations in temperature, concentration, solvent and ratio of R_nAlCl_3−n to the titanium catalyst, the polymerization activity of the catalyst system towards ethylene was markedly altered. Such changes in activity support the conclusion that the most active sites for polymerization in such systems are the solvent-separated ion pairs.