Regiospecific oxidation of an alkyl group of aromatic amine to carbonyl group by DDQ in aq.medium

The regiospecific oxidation of alkyl group of both sterically hindered and unhindered aromatic amine to corresponding carbonyl compound was done in aq. medium by using DDQ. The optimized reaction protocol was found to be most simple, high yielding and novel method for oxidation of alkyl group of aromatic amine in to its carbonyl compound.     

Synthesis of sterically hindered aromatic aldehydes

Formylation of mesitylene, durene, and m-xylene derivatives containing electron-donor and electron-acceptor substituents by dichloromethyl methyl ether was studied in the presence of TiCl₄. A series of functionally substituted sterically hindered benzaldehydes was prepared from the products of these reactions.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 7, pp. 1609–1615, July, 1991.     

Synthesis of sterically hindered aromatic dialdehydes

A study was carried out on the formylation of a series of aromatic compounds containing two mesitylene or durene residues [dimesityl (I), dimesitylmethane (II), 1,2-dimesitylethane (III), 1,6-dimesitylhexane (IV), dimesityl sulfide (V), 1,1-dimesitylethylene (VI), 1,1-dimesityl-1-butene (VII), and didurylmethane (VIII)] by the action of dichloromethyl methyl ether (DCM) in the presence of A1C1₃ and TiCl₄. The corresponding dialdehydes are the major products. The formylation products when the reaction is carried out in the presence of A1C1₃ in the case of (I) and (V) contain significant amounts of monoaldehydes, while partial cleavage of the substrates with the formation of products containing only one benzene ring is observed in the case of (II) and (VIII) in addition to formylation.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 7, pp. 1700–1703, July, 1991.     

Quenching of aromatic ketone phosphorescence by sterically hindered alkenes

The deactivation of the excited states of triplet ketones by sterically hindered alkenes results in lower rate constants (usually due to increased activation energies) than by relatively unhindered alkenes.     

Solid-phase synthesis of aryl, heteroaryl, and sterically hindered alkyl amines using the Curtius rearrangement

An efficient method for the solid-phase synthesis of aryl amines, heteroaryl amines, and sterically hindered alkyl amines has been developed. The key step in this process was the formation of resin-bound carbamates (B) by the Curtius rearrangement of aryl carboxylic acids with Wang resin providing the trapping hydroxyl group. N-Alkylation reactions of B gave secondary amines in good yield. Some biaryl amines, which are found widely in biologically active substances, were also prepared by the Suzuki reaction of resin-bound carbamates of 2-iodoaniline (16) or 3-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)aniline (21). The developed methods can be applied to the preparation of libraries containing aryl, heteroaryl, and sterically hindered alkyl amine structures as the pharmacophores.     

Palladium-catalyzed sequential indole synthesis using sterically hindered amines

A palladium catalyst derived from a bulky N-heterocyclic carbene ligand enabled a modular synthesis of indoles bearing sterically hindered N-alkyl or N-aryl substituents through a reaction sequence comprising an intermolecular N-arylation and an intramolecular hydroamination.     

Enantioselective organocatalytic oxidation of functionalized sterically hindered disulfides

[structure: see text]. The first study on enantioselective oxidation of functionalized sterically hindered disulfides is reported. This study shows that the Shi organocatalytic system using carbohydrate-derived ketone with oxone is superior to the Ellman-Bolm vanadium catalyst in terms of chemical yield and enantioselectivity. Whereas the latter system afforded mostly racemic thiosulfinates in low to moderate yields, the former one afforded thiosulfinates with up to 96% ee.     

Chemical and electrical passivation of silicon (111) surfaces through functionalization with sterically hindered alkyl groups

Crystalline Si(111) surfaces have been alkylated in a two-step chlorination/alkylation process using sterically bulky alkyl groups such as (CH3)2CH- (iso-propyl), (CH3)3C- (tert-butyl), and C6H5- (phenyl) moieties. X-ray photoelectron spectroscopic (XPS) data in the C 1s region of such surfaces exhibited a low energy emission at 283.9 binding eV, consistent with carbon bonded to Si. The C 1s XPS data indicated that the alkyls were present at lower coverages than methyl groups on CH(3)-terminated Si(111) surfaces. Despite the lower alkyl group coverage, no Cl was detected after alkylation. Functionalization with the bulky alkyl groups effectively inhibited the oxidation of Si(111) surfaces in air and produced low (<100 cm s(-1)) surface recombination velocities. Transmission infrared spectroscopy indicated that the surfaces were partially H-terminated after the functionalization reaction. Application of a reducing potential, -2.5 V vs Ag+/Ag, to Cl-terminated Si(111) electrodes in tetrahydrofuran resulted in the complete elimination of Cl, as measured by XPS. The data are consistent with a mechanism in which the reaction of alkyl Grignard reagents with the Cl-terminated Si(111) surfaces involves electron transfer from the Grignard reagent to the Si, loss of chloride to solution, and subsequent reaction between the resultant silicon radical and alkyl radical to form a silicon-carbon bond. Sites sterically hindered by neighboring alkyl groups abstract a H atom to produce Si-H bonds on the surface.     

Synthesis of sterically hindered 1-arylpyrrolidines and 1-arylpiperidines by condensation of primary aromatic amines with cyclic ethers or diols

A variety of 1-($\text{o}$-alkylphenyl)- and 1-($\text{o}$-$\text{o}$'-dialkylphenyl)- pyrrolidines and -piperidines were prepared by the gas phase alumina mediated condensation of tetrahydrofuran (THF), tetrahydropyran (THP) or the corresponding diols with primary aromatic amines in fair to high yield. This methodology can also be used for the synthesis of 1-phenylhexahydroazepine from aniline. A mechanistic interpretation of the catalytic action of alumina is presented.     

Electrochemical oxidation and determination of high-molecular-weight sterically hindered phenols

The use of differential pulse voltammetry for the determination of Irganox 1010, a sterically hindered phenol used as an antioxidant, prompted an investigation of the electrochemical behavior of several other commercially available high-molecular-weight hindered phenols used as antioxidants and stabilizers. Although these compounds generally have at least two phenol groups per molecule, their electrochemical behavior is similar to that of simpler hindered phenols such as 2,4,6-tri-t-butylphenol. Detection limits ranging from 1.3 to 8.2 ppm were obtained in a methanol—0.07 M sulfuric acid medium. The oxidation of alkylphenols in neutral or acidic media is accompanied by follow-up chemical reactions, leading to formation of passivating films on the surface of the glassy carbon electrode. In alkaline media, the corresponding phenoxide is oxidized electrochemically to the corresponding stable phenoxy radical and filming can be avoided.     

Electron spin resonance studies on the oxidation mechanism of sterically hindered cyclic amines in TiO2 photocatalytic systems

A sterically hindered cyclic amine, 4-hydroxy-2,2,6,6-tetramethylpiperidine (HTMP), is converted to the corresponding aminoxyl radical (nitroxide radical), 4-hydroxy-2,2,6,6-tetramethyl piperidine 1-oxyl (TEMPOL radical) as a result of a photocatalytic reaction in TiO2 aqueous suspension. The time profile of the radical formation and the effect of additives, such as SCN-, I-, methanol, and H2O2, on the initial formation rate were measured in order to elucidate the reaction mechanism. The experimental observations indicated that the direct photocatalytic oxidation of HTMP followed by reaction with O2 is the dominant process in the formation of TEMPOL radicals. Electrochemical measurements showed that HTMP is oxidized at 0.7 V (vs NHE), which is consistent with the proposed mechanism. The possibility of other processes, involving reactions with singlet molecular oxygen, superoxide radical, and hydroxyl radical, were excluded from the reaction mechanism.     

Functional derivatives of sterically hindered amines. 1. Glycidyl compounds

Four polymerizable glycidyl derivatives of sterically hindered amines were prepared from derivatives of 2, 2, 6, 6-tetramethyl-4-hydroxypiperidine and 14, 16-dioxo-7, 15-diazadispiro [5, 1, 5, 3] hexadecane. One of them is a stable nitroxyl derivative.     

New hybrid silsesquioxane materials with sterically hindered carbosilane side groups

Unique silsesquioxane materials, bearing highly sterically hindered carbosilane substituents at SiO_3/2 centre, were derived from a novel precursor – (Me₃Si)₃CSiMe₂CH₂CH₂Si(OEt)₃ – in a hydrolytic condensation process under nucleophilic catalysis conditions. As proved by analytical results, crystalline or ladder-like [(Me₃Si)₃CSiMe₂CH₂CH₂SiO_3/2]_n (PT_SiSS) were obtained, depending on the applied reaction conditions. Due to the intrinsic features of (Me₃Si)₃CSiMe₂–carbosilane substituent (the bulk and large amount of Si–C bonds), the obtained ladder-like silsesquioxanes show specific properties (good solubility, low dielectric constant κ).