Z-scan determination of the third-order optical nonlinearity of a triphenylmethane dye using 633 nm He–Ne laser

The third-order nonlinear optical response of a triphenylmethane dye (Acid blue 7) was studied using the Z-scan technique with a continuous-wave He–Ne laser radiation at 633 nm. The magnitude and sign of the third-order nonlinear refractive index n₂ of aqueous solution of Acid blue 7 dye were determined; the negative sign indicates a self-defocusing optical nonlinearity in the sample studied. The negative nonlinear refractive index n₂ and nonlinear absorption coefficient β were estimated to be −1.88 × 10⁻⁷ cm²/W and −3.08 × 10⁻³ cm/W, respectively, corresponding to Re(χ⁽³⁾) = −8.35 × 10⁻⁶ esu, and Im(χ⁽³⁾) = −6.88 × 10⁻⁷ esu. The experimental results show that Acid blue 7 dye have potential applications in nonlinear optics.     

Characterization of optical and nonlinear optical properties of silver nanoparticles prepared by laser ablation in various liquids

The optical, structural, and nonlinear optical properties of silver nanoparticles prepared by laser ablation in various liquids were investigated at 397.5, 532, and 795 nm. The TEM and spectral measurements have shown temporal dynamics of size distribution of Ag nanoparticles in solutions. The thermal-induced self-defocusing dominated in the case of high pulse repetition rate as well as in the case of nanosecond pulses. In the case of low pulse repetition rate, the self-focusing (γ = 3 × 10⁻¹³ cm² W⁻¹) and saturated absorption (β = −1.5 × 10⁻⁹ cm W⁻¹) of picosecond and femtosecond radiation were observed in these colloidal solutions. The nonlinear susceptibility of Ag nanoparticles ablated in water was measured to be 5 × 10⁻⁸ esu (at λ = 397.5 nm).     

Optical constants of Tl4Ga3InSe8 layered single crystals

The optical properties of Tl₄Ga₃InSe₈ layered single crystals have been studied by means of transmission and reflection measurements in the wavelength range of 500–1100 nm. The analysis of the room temperature absorption data revealed the presence of both optical indirect and direct transitions with band gap energies of 1.94 and 2.20 eV, respectively. Transmission measurements carried out in the temperature range of 10–300 K revealed that the rate of change of the indirect band gap with temperature is γ=−4.1×10⁻⁴ eV/K. The absolute zero value of the band gap energy was obtained as E_gi(0)=2.03 eV. The dispersion of the refractive index is discussed in terms of the Wemple–DiDomenico single-effective-oscillator model. The refractive index dispersion parameters: oscillator energy, dispersion energy, oscillator strength and zero-frequency refractive index were found to be 4.10 eV, 23.17 eV, 6.21×10¹³ m⁻² and 2.58, respectively. From X-ray powder diffraction study, the parameters of monoclinic unit cell were determined.     

Corrosion monitoring of stainless steel 304L in lithium bromide aqueous solution using transmittance optical detection technique

We report a method based on the power ratio of transmittance for monitoring the corrosion rate in stainless steel 304L immersed in an aqueous solution of lithium bromide at 50 wt%, at 70 °C. The optical transmittance measured in the solution contaminated with corrosion oxides at different times of exposure is related to the physical degradation of the stainless steel samples. Lasers at 532 and 632 nm were utilized for monitoring the accumulation of corrosion oxides dissolved in the lithium bromide solution of the metallic samples for 480 h. The change in the optical power of transmittance was 13 μW/480 h measured at 532 nm and 3.6 μW/480 h at 632 nm. The variation of the power ratio for 532 nm was from 0.01 to 0.24, and for 632 nm, from 0.01×10⁻³ to 15.61×10⁻³; this is proportional to an accumulated corrosion rate of [0.0142×10⁻³–0.552×10⁻³ g/cm²] for an exposure time of 432 h.     

Optical nonlinearities and photo-excited carrier lifetime in CdS at 532 nm

Bound-electronic and free-carrier optical nonlinearities, and relaxation of photo-excited free carriers in CdS have been investigated by the use of a single-beam Z-scan technique at 532 nm. Under pulsed radiation of 35-ps duration with the input irradiances up to 4.8 GW/cm², the two-photon absorption coefficient, the bound-electron nonlinear refractive index, the free-carrier absorption cross-section, and the change in the refractive index per unit carrier density are determined to be 5.4±0.8 cm/GW, −(5.3±0.8)×10⁻¹³ cm²/W, (3.0±0.5)×10⁻¹⁷ cm² and −(0.8±0.1)×10⁻²¹ cm³, respectively. By using these values in the open-aperture Z-scans conducted with 7-ns laser pulses, the carrier recombination time is extracted to be 3.6±0.7 ns. The measured parameters are compared to theoretical calculations.     

Study of effects of Mn in CdS nanocrystals

Mn²⁺-doped CdS nanocrystals have been synthesized by adopting an aqueous solution precipitation method. These nanocrystals have been studied using X-ray diffraction (XRD), X-ray fluorescence (XRF), optical absorbance, photoluminescence (PL), DC electrical conductivity measurements and positron annihilation lifetime spectroscopy (PALS). The system has been found to be in the hexagonal phase. PL spectra have been studied on most prominent exciton peaks within the wavelength range (586–731 nm). The emission intensity is found to increase on increasing Mn²⁺ ion concentration (0–5%). Electrical conductivity lies within 0.819×10⁻⁶ to 1.69×10⁻⁶ Ω⁻¹ m⁻¹ and the system shows power law dependence for n=3–3.77. The Cd vacancies concentration has been found to decrease on increasing Mn%.     

Gordon–Haus timing jitter in dispersion-managed systems with distributed amplification

The moment method is used to study the Gordon–Haus timing jitter of optical pulses in dispersion-managed communication systems with distributed amplification. Timing-jitter formulas are derived for the dispersion-managed soliton and chirped return-to-zero formats. These formulas are used to study the effects of dispersion compensation on timing jitter. Just as distributed amplification reduces the amount of amplifier noise, so also does it reduce the timing jitter caused by amplifier noise. For both transmission formats, one can reduce the timing jitter significantly by choosing the amount of dispersion compensation judiciously.     

Optimizing amplifier spacing to improve performance in RZ-rectangular pulse based 10 Gb/s single channel dispersion managed optical communication system

In this paper, we optimize the inter-amplifier spacing in combination with duty cycle of RZ data format and EDFAs power so that link length of system can be maximized. The results for EDFA amplifier placement in 10 Gbps single channel dispersion managed optical communication system have been presented. By increasing the length of standard single mode fiber of dispersion 16 ps/nm/km in proportion to the increase in length of compensating fiber of dispersion −80 ps/nm/km, the pre-, post- and symmetrical-dispersion compensation schemes of the system have been compared. Further, schemes are observed at 8, 10 and 12 dBm values of EDFA power in the link with different duty cycle values of RZ optical pulse in the range of 0.2-0.8 with step size of 0.2 in relation to amplifier spacing to get lower value of bit error rate and timing jitter. The graphical results obtained show strong relationship among duty cycle of RZ optical pulse, EDFA power and, dispersion compensation scheme.     

Power penalty of cascaded Bragg gratings in the presence of PMD and PDL

Considering the presence of birefringence in Bragg gratings, the spectral polarization mode dispersion (PMD) and polarization dependent loss (PDL) induced power penalty of eye opening is examined for a network with cascaded Bragg gratings. It is shown that when the birefringence in the grating is less than 10⁻⁵, the induced power penalty is less than 0.1 dB for a network with up to 30 cascaded Bragg gratings. However, when the grating birefringence is on the order of 10⁻⁴, the induced power penalty can be as high as 5.6 dB for a network with 14 cascaded Bragg gratings.     

Domain wall pinning in polycrystalline perovskite La0.7Sr0.3MnO3

Reversible and irreversible domain wall (DW) motions have been investigated in La_0.7Sr_0.3MnO₃ ceramic samples using frequency-response complex permeability with various amplitudes of AC field. We also examine the effects of temperature in the range from 293 to 368 K and transverse DC magnetic field with a maximum of 4.40×10⁵ A/m on the real part of permeability (μ′). Two relaxations corresponding to reversible wall motions and domain rotations occur in low and high frequency regions, respectively. The irreversible DW displacements can be activated as the amplitude larger than the pinning field of 3 A/m, leading to an increase in μ′. The μ′ obeys a Rayleigh law at the temperature below 343 K or under DC field of less than 4.22×10⁴ A/m. The Rayleigh constant η increases from 5.45×10⁻² to 1.54×10⁻¹ (A/m)⁻¹ as the temperature rises from 293 to 343 K, and η decreases from 5.58×10⁻² to 3.67×10⁻² (A/m)⁻¹ with increasing DC field from 1.99×10³ to 4.22×10⁴ A/m.     

Density, viscosity and ultrasonic velocity studies of aqueous solutions of sodium acetate at different temperatures

The densities and viscosities of aqueous solutions of sodium acetate have been measured at 298.15, 303.15, 308.15 and 313.15 K and at atmospheric pressure. The molality range has been studied between 6.09 × 10^− 2 to 7.314 × 10^− 1 mol kg^− 1. The experimental values of density have been used to calculate apparent molar volume, partial molar volume, solute–solute interaction parameter, and Hepler's constant. The viscosity data have been analyzed with Jone–Dole equation. Furthermore, ultrasonic velocity measurements of aqueous solutions of sodium acetate have been made at 298.15 and 308.15 K and at atmospheric pressure. From experimental values of ultrasonic velocity, apparent molar isentropic compressibility and limiting apparent molar isentropic compressibility have been calculated. All the parameters calculated from density, viscosity, and ultrasonic velocity indicate that the sodium acetate is water structure maker.     

Electron-stimulated nitridation of Si(100) in pure ammonia

We present the results of an AES study of the Si(100) electron-stimulated nitridation at RT by ammonia gas. The influence of the gas pressure and electron beam density on the nitridation rate have been determined within the ranges 10⁻⁶–10⁻⁹ Torr and 5 × 10⁻³–5 × 10⁻² A/cm², respectively. The silicon nitride growth rate has been found to be proportional to the electron flux and is enhanced with increased ammonia pressure in the range 10⁻⁹–10⁻⁷ Torr. Beyond 10⁻⁷ Torr the Si nitride growth rate is constant and independent of ammonia pressure. A phenomenological model of electron-stimulated nitridation process is suggested, which is in good agreement with the experimental data. The rate of electron-stimulated nitridation has been deduced.     

Optical second-harmonic investigations of the isothermal desorption of SiO from the Si(100) and Si(111) surfaces

The isothermal desorption of SiO from the Si(100) and Si(111) surfaces was investigated by means of optical second-harmonic generation (SHG). Due to the high adsorbate sensitivity of this method, desorption rates could be measured over a wide range from 10⁻¹ to 10⁻⁶ ML s⁻¹. From their temperature dependence between 780 and 1000 K, activation energies of E_A=3.4±0.2 eV and E_A=4.0±0.3 eV and pre-exponential factors of ν₀=10^16±1 s⁻¹ and ν₀=10^20±1 s⁻¹ for SiO desorption were obtained for Si(100) and Si(111), respectively. In the case of the Si(100) surface, a pronounced decrease of the first-order rate constants was observed upon increasing the initial coverage from 0.02 to 0.6 ML. The results are interpreted in terms of coverage-dependent oxygen-binding configurations, which influence the stability of the oxide layer.     

Annealing effects on zirconium nitride films

ZrN films were deposited by dc reactive magnetron sputtering on silicon substrates under optimized nitrogen partial pressure of 6×10⁻⁵ mbar. Structural, electrical and optical properties were systematically investigated. Films deposited at room temperature exhibited Schottky structure without any silicide interfacial layer. These films have electrical resistivity of 4.23×10⁻³ Ω cm, which were crystalline in nature, with cubic (1 1 1) orientation. Refractive index and extinction coefficient were found to be 1.95 and 0.43, respectively at a wavelength of 350 nm.

Samples were annealed for 1 h in air at two temperatures, 350 and 550 °C. Scanning electron microscopy (SEM) and energy dispersive analysis of X-rays (EDAX) showed alloy penetration pits. Extent of penetration was greater in the films, which were annealed at higher temperature (550 °C). Variation in refractive index was observed in the range of 1.95–1.80 at 350 nm, for the annealed films, with increase in grain size from 7.25 to 11.10 nm. Poly-crystalline nature has been observed with (1 1 1) and (2 0 1) orientations. Resistivity is found to increase from 4.23×10⁻³ to 6.21×10⁻³ Ω cm.     

Picosecond nonlinear optical response of Ba0.5Sr0.5TiO3 thin films fabricated by pulsed laser deposition

Well-crystallized Ba_0.5Sr_0.5TiO₃ thin films with good surface morphology were prepared on MgO(1 0 0) substrates by pulsed laser deposition technique at a deposition temperature of 800 °C under the oxygen pressure of 2 × 10⁻³ Pa. X-ray diffraction and atomic force microscopy were used to characterize the films. The full width at half maximum of the (0 0 2) Ba_0.5Sr_0.5TiO₃ rocking curve and the root-mean-square surface roughness within the 5 μm × 5 μm area were 0.542° and 0.555 nm, respectively. The nonlinear optical properties of the films were determined by a single beam Z-scan method at a wavelength of 532 nm with laser duration of 55 ps. The results show that Ba_0.5Sr_0.5TiO₃ thin films exhibit a fast third-order nonlinear optical response with the nonlinear refractive index and nonlinear absorption coefficient being n₂ = 5.04 × 10⁻⁶ cm²/kW and β = 3.59 × 10⁻⁶ (m/W), respectively.     

Methane mobility in carbon nanotubes

Quasi-elastic neutron scattering has been used to characterize the diffusivity of CH₄ molecules condensed in single-wall carbon nanotubes. It is shown that the two sites of adsorption, previously observed by adsorption volumetry and calorimetry measurements, correspond to a solid-like phase for the more strongly bound site at T<120 K and to a liquid-like component for the more weakly bound site at 70<T<120 K. The diffusion coefficients of the mobile molecules range between 3×10⁻⁷ to 15×10⁻⁷ cm² s⁻¹. The fraction of this viscous liquid diminishes as the temperature is decreased; the adsorbate is fully solidified at 50 K and below.     

Z-scan study of third-order optical nonlinearities in bismuth-based glasses

The third-order optical nonlinearity was measured in bismuth-based glasses by Z-scan technique using femto-second laser pulses. Re(χ⁽³⁾) = 4.9 × 10⁻¹¹ esu at 748 nm was obtained in the glass containing 65.5 mol% of Bi₂O₃. Although, the wavelength dependence of Re(χ⁽³⁾) shows resonant effect significantly, relatively small nonlinear absorption coefficient β = 0.8 cm/GW at 769 nm was estimated. Bismuth-based glass exhibits the largest third-order optical nonlinearity in oxide glasses, indicating they are promising materials used for nonlinear optical devices.     

Electrode contact study for SiGe thin film operated at high temperature

A study on the electrode contact of the sputtered SiGe thin film is reported for application of devices working at high temperature. Surface morphological characterization with optical microscope and AFM (atomic force microscope) together with the electrical characterization by TLM measurements (transmission line method) were performed before and after aging at 500 °C for 24 h using various sputtered multilayer electrodes, Ti/Au/Ti, Ta/Pt/Ta and Ti/Pt/Ti, on 300-nm B-doped SiGe thin film deposited by magnetron sputtering and furnace crystallisation at high temperature. After aging at 500 °C for 24 h, the Ti/Au/Ti multilayer electrodes seriously degraded to be non-ohmic contact, showing rough surface morphology. The Ti/Pt/Ti metal layers showed the lowest specific contact, resistivity before and after aging, 1.46 × 10⁻³ Ω cm² and 1.68 × 10² Ω cm² respectively.     

Magnetic properties of carbonado diamonds

Carbonados are porous polycrystalline diamonds of uncertain origin, which are found at locations in Bahia (NE Brazil) and in the Central African Republic. Their combination of extreme hardness and toughness is ideal for drilling and cutting tools. A variety of elements including Fe, Ni, Cu and Ag are associated with the diamonds. Following a suggestion that Mn-doped diamond may be intrinsically ferromagnetic, we have analysed six samples from Brazil which show ferromagnetic moments of up to 3 A m² kg⁻¹, which is reduced by acid leaching. X-ray diffraction on the crushed powder showed a cubic diamond structure, with no secondary phases visible. Scanning electron microscopy shows an inhomogeneous distribution of heavy metals and Mössbauer spectroscopy indicates that iron is present as native iron. We find no evidence from the carbonados for the existence of transition-metal doped ferromagnetic carbon. The intrinsic diamagnetic susceptibility of carbonados is −4.5×10⁻⁹ m³ kg⁻¹, similar to the accepted value for diamond,−5×10⁻⁹ m³ kg⁻¹.     

New isomeric states in Fr and At

Alpha spectroscopic data from the decay chain ²¹⁸Fr → ²¹⁴At → ²¹⁰Bi have been obtained. Previously unobserved isomeric states were found in both ²¹⁸Fr and ²¹⁴At. The half-life of the ground state of ²¹⁸Fr was measured to be 1.3^+0.5 _−0.4 ms. The half-life of the new isomeric state in ²¹⁸Fr was determined to be 22.0±0.5 ms and its decay was found to be very complex with no fewer than 20 -groups varying in energy between 6837 keV and 7952 keV. Two long-lived states in ²¹⁴At with half-lives of 558±10 ns and 760±15 ns, respectively, were found to be strongly populated in the decay of ^218mFr. These two states are proposed to be a 1⁻ ground state and a 9⁻ isomeric state arising from the coupling between the unpaired h_9/2 proton and g_9/2 neutron.