(S)-3-苯基-2-氨基丙硫醇盐酸盐的合成

以L 苯丙氨酸为原料经还原反应得到氨基醇,用Boc基团进行氨基保护后得到(S) 3 苯基 2 叔丁氧羰基氨基 1 丙醇,甲磺酰化后与硫代乙酸钾在DMF中反应得到(S) 3 苯基 2 叔丁氧羰基氨基 1 丙硫醇乙酸酯,再分别脱除乙酰基,氨基保护基后得到(S) 3 苯基 2 氨基丙硫醇盐酸盐.并用元素分析、红外光谱、核磁共振等手段对中间体和目标化合物进行了表征.     

Boc-L-(苯丙)噻唑-4-甲酸甲酯的合成研究

本文分别以L-苯丙氨酸甲酯盐酸盐和叔丁氧羰基保护的L-苯丙氨酸为起始原料,经两种不同的合成路线,完成了Boc-L-(苯丙)噻唑-4-甲酸甲酯的合成。其中,第一条路线共五步反应,总收率18%;第二条路线共四步反应,总收率22%,两条路线所涉及的官能团转换和反应有:氨基Boc保护、酯基还原、羟基Parikh-Doering氧化,MnO_2氧化,N-甲氧基-N-甲酰胺化。     

N~6,N~6-二(叔丁氧羰基)-2',3'-O-异丙叉腺苷的合成

以腺苷(2)为原料,经丙酮叉保护2',3'-位羟基得2',3'-O-异丙叉腺苷(3);3经叔丁基二甲硅氯保护5'-羟基得5'-O-叔丁二甲基硅基-2',3'-O-异丙叉腺苷(4);4经二碳酸二叔丁酯保护氨基得到N~6,N~6-二(叔丁氧羰基)-2',3'-O-异丙叉基-5'-O-叔丁二甲基硅基腺苷(5);5用四丁基氟化铵脱去叔丁二甲基硅基合成了新化合物N`6,N~6-二(叔丁氧羰基)-2',3'-O-异丙叉腺苷,总收率54.3%,其结构经~1H NMR,~(13)C NMR,IR和HR-MS表征.     

手性γ-氨基酸:5-羟基-3-氨基环己基甲酸的不对称合成

以光学纯的(1S,5S)-5-叔丁氧羰基氨基-3-环己烯基甲酸为原料,经立体选择性地碘代内酯化、脱碘、醇解、水解、酯化5步反应首次合成了两个光学纯的γ-氨基酸衍生物——(1R,3S,5R)-5-羟基-3-叔丁氧羰基氨基环己基甲酸甲酯(总收率36.7%)和(1R,3S,5R)-5-羟基-3-叔丁氧羰基氨基环己基甲酸苄酯(总收率35.2%),其结构经1H NMR,13C NMR,IR和ESI-HR-MS确证。     

N-叔丁氧羰基-3-羟基-1-金刚烷基甘氨酸的合成

以金刚烷甲酸(1)为起始原料,经过酰化,取代,脱羧三步反应一锅法制得金刚烷甲基酮(2),然后氧化甲基得到1-金刚烷基乙醛酸(3),将3与盐酸羟氨反应得到1-金刚烷乙醛酸肟(4),还原4并用BOC酸酐保护氨基得到N-叔丁氧羰基-1-金刚烷基甘氨酸(5),最后经高锰酸钾氧化得到DPP-IV抑制剂沙格列汀中间体N-叔丁氧羰基-3-羟基-1-金刚烷基甘氨酸(6),总收率28%。     

三步法合成高封端率端氨基聚乳酸

叔丁氧羰基碳酸酐((Boc)2O)和氨基丙醇反应合成叔丁氧羰基氨基丙醇(Boc-氨基丙醇),以此为引发剂在辛酸亚锡的催化下,引发L-丙交酯开环聚合合成叔丁氧羰基氨基封端聚乳酸(BocNH-PLLA),叔丁氧羰基(Boc)经三氟乙酸处理脱除后得到端氨基聚乳酸(PLLA-NH2).以PLLA-NH2为大分子引发剂,引发ω-苄氧羰基L-赖氨酸-N-羧酸酐(ω-Z-L-Lysine-NCA)开环聚合,合成聚L-乳酸-聚ω-苄氧羰基L-赖氨酸两嵌段共聚物(P(LLA-LLz)).采用红外光谱(FT-IR)、核磁共振氢谱(1H-NMR)、凝胶渗透色谱(GPC)对聚合物结构进行了表征.结果表明:PLLA-NH2端基亲核性明显提高,可引发ω-Z-L-Lysine-NCA开环聚合制备嵌段共聚物,PLLA-NH2的合成方法简便,氨基封端率高,其分子量和单体与引发剂的摩尔比具有良好的线性关系.     

3-仲氨基氧杂环丁烷-3-腈衍生物的合成

以仲胺、氧杂环丁-3-酮和三甲基氰硅烷为原料,无水甲醇为溶剂,无需催化剂,一步反应合成目标化合物3-仲氨基氧杂环丁烷-3-腈衍生物（1a~1d）,产物结构经1H NMR和ESI-MS表征。并以异吲哚啉、氧杂环丁-3-酮和三甲基氰硅烷的反应为模型反应,考察影响产物1a收率的主要因素,确定最佳反应条件为：物料摩尔比为n（异吲哚啉）: n（氧杂环丁-3-酮）: n（三甲基氰硅烷）= 2.0 : 1 : 2.5;反应溶剂为无水甲醇,在65 ℃反应6 h。在最佳反应条件下,化合物1a收率78.3 %。对于目标化合物的应用进行了研究,发现化合物1a与苯基溴化镁在四氢呋喃溶剂中,室温反应5 h,得到2-(3-苯基氧杂环丁烷-3-基)异吲哚啉（4）和 [3-(异吲哚啉-2-基) 氧杂环丁烷-3-基](苯基)甲酮（5）,收率分别为40.1 %和31.5 %。     

合成宾达利的新方法

以邻氨基苯乙酮(2)为原料,经过连续的重氮化-还原-缩合反应序列制得3-甲基-1H-吲唑(3);3经(Boc)2O保护亚氨基后以NBS进行甲基溴代反应制得1-叔丁氧羰基-3-溴甲基-1H-吲唑(5);5与2-羟基异丁酸乙酯缩合得醚2-(1-叔丁氧羰基-1H-吲唑-3-基)甲氧基-2-甲基丙酸乙酯(6);6经HCl/乙酸乙酯溶液脱Boc保护制得关键中间体7;在叔丁醇钾存在下,7与溴苄缩合并水解合成了MCP-1抑制剂宾达利,总收率37.3%,其结构经1H NMR,13C NMR和MS确证。     

2-[1-(叔丁氧羰基氨基)乙基]噻唑-4-甲酸甲酯的合成

以(S)-丝氨酸和N-Boc-(S)-丙氨酸为原料,经酯化、偶合、TBS保护、硫化、脱保护、环合,脱氢等七步反应,合成了对人体肿瘤细胞KB和LoVo具有中等细胞毒性的天然环酯肽Obyanamide的噻唑结构片段2-[1-(叔丁氧羰基氨基)乙基]噻唑-4-甲酸甲酯,其ee值大于98%,总收率为21.4%.     

5-(4-叔丁氧基羰基哌嗪基)苯并呋喃-2-甲酸乙酯的合成

5-溴苯并呋喃-2-甲酸乙酯与4-叔丁氧基羰基哌嗪进行Buchwald-Hartwig偶联反应,若催化剂是Pd(OAc)2/BINAP,碱是Cs2CO3,则产物主要是5-(4-叔丁氧基羰基哌嗪基)苯并呋喃-2-甲酸乙酯,转化率达70%;若催化剂是Pd(dba)2/P(t-Bu)3,碱是叔丁醇钾,则产物中几乎没有5-(4-叔丁氧基羰基哌嗪基)苯并呋喃-2-甲酸乙酯.文中讨论了影响这个Buchwald-Hartwig偶联反应的因素.     

PMDA-BPDA-HAB聚苯并噁唑的合成及耐热性

PMDA-BPDA-HAB聚苯并噁唑的合成及耐热性;均苯四甲酸二酐;联苯四羧酸二酐;二羟基联苯胺;聚酰亚胺;聚苯并噁唑;耐热性     

The development and application of guidance on equipment qualification of analytical instruments

 This paper describes the development of guidance for the equipment qualification (EQ) of analytical instruments. EQ is a formal process that provides documented evidence that an instrument is fit for its intended purpose and kept in a state of maintenance and calibration consistent with its use.     

Effect of Transition Metals on Selective Hydrogenation of Cinnamaldehyde over Pt／ZrO2 Catalysts

The effect of transition metals (Cr, Mn, Fe, Co and Ni) on the hydrogenation of cinnamaldehyde over Pt/ZrO2 catalysts was studied in ethanol at 343K under 2.0MPa H2 pressure. PtCo/ZrO2 and PtFe/ZrO2 catalysts exhibit high selectivity and activity of hydrogenation for C=O (93.8% at 87.3% conversion and 83.6% at 88.6% conversion, respectively), and PtNi/ZrO2 exhibits high selectivity of hydrogenation for C=C (64.3% at 70.6% conversion). In the presence of trace H2O and NaOH, over the PtNi/ZrO2 (0.4wt%Ni) catalyst the selectivity to hydrocinnamalde hydereaches 90.6% and the conversion of cinnamaldehyde is 90.5%.     

Synthesis and Multinuclear NMR Study of Benzoyl Methylene Triparatolylphosphorane Ylide and the Reaction of this Ylide with Mercury(II) Halides

The reaction of the title ylide {PhCOCHP(p-tolyl)₃} with Pd(II), Pt(II). Hg(II), and Ag(I) in equimolar ratios using CH₃CN, CH₃OH, and CH₂Cl₂ as solvents have yielded [{(p-tolyl)₃PCHCOC₆H₅} PdCl₂]₂ (I), [{(p-tolyl)₃ PCHCOC₆H₅} PtCl₂]₂(2), [Hg(NO₃)₂ {(p-tolyl)₃ PCHCOC₆H₅}](3), and [Ag{(p-tolyl)₃ PCHCOC₆H₅ < eqid1 > ₂]⁺ (4). The IR, ¹H ¹³C, and ³¹P NMR together with micro analysis data of the products were obtained.     

Novel Designing of Chemically Modified Electrode (CME) of the Bio-MOF-1 for the Detection of Dopamine Based on Inhibition of [Ru(bpy)3]2+/DBAE System

Metal organic frameworks (MOFs) have attracted extensive attention in electrochemical research fields due to their high surface area and controlled porosity. Current study is design to investigate the ECL performance of the chemically modified electrode (CME) based on the bio-MOF-1, a porous zinc-adenine framework, which loaded ruthenium complex and employed for the detection of dopamine (DA). The composite material [Ru(bpy)₃]²⁺@bio-MOF-1 (Ru-bMOF) modified carbon glassy electrode (Ru-bMOF/GCE) exhibited an excellent ECL performance having a linear co-efficient response (R²=0.9968) for 2-(dibutyl amino) ethanol (DBAE), a classical ECL co-reactant was obtained over a concentration range of 1.0×10⁻⁹ M to 1.0×10⁻⁴ M in 0.10 M pH=6.0 phosphate buffer solution (PBS). Furthermore, DA was detected based on its inhibition effect on [Ru(bpy)₃]²⁺/DBAE system. Compared to traditional analytical methods, this method has various advantages such as simple electrode preparation, quick response, high reproducibility (RSD<2.0 %), low limit of detection (LOD=1.0×10⁻¹⁰ mol/L). This chemical investigated modified electrode had exploited potential for detection of DA.     

Step-scan TMDSC and high rate DSC study of the multiple melting behavior of poly(1,3-propylene terephthalate)

The multiple melting behavior of poly(1,3-propylene terephthalate) (PPT) samples after isothermal crystallization from the melt was studied. The step-scan temperature-modulated differential scanning calorimetry (TMDSC) and high rate DSC were used to investigate this behavior in conjunction with standard DSC, wide-angle X-ray diffraction (WAXD) and polarizing light microscopy (PLM). The effect of PPT average molecular weight on the melting was also examined. In general multiple endotherms after isothermal crystallization of PPT were attributed to a continuous crystal perfection process during the subsequent heating scan via melting-recrystallization-remelting. Multiple melting behavior was more pronounced for the low molecular weight PPT. Step-scan TMDSC showed that extensive recrystallization occurs in PPT samples, especially after rapid isothermal crystallization. In fact two recrystallization exothermic peaks were observed. High rate DSC revealed the initial morphology generated during the isothermal step and showed that the low and middle peaks are associated with melting of primary crystals while the high temperature peak should be attributed to melting of recrystallized material.     

Biodegradations of block copolymers composed of L- or D,L-lactide and six-membered cyclic carbonates prepared with organolanthanide initiators

Diblock copolymerizations of L - or D,L -lactide (LA) with trimethylene carbonate (TMC) or 2,2-dimethyltrimethylene carbonate (2,2-DTMC) with SmMe(C₅Me₅)₂-(tetrahydrofuran) as an initiator and triblock copolymerizations of L - or D,L -LA/cyclic carbonates/L - or D,L -LA with [Sm(C₅Me₅)₂]₂(PhCCCCPh) as an initiator generated the desired block copolymers. This article describes the comparison of biodegradabilities by proteinase K and a compost and mechanical properties between the resulting di- or triblock copolymers and random copolymers composed of L - or D,L -LA and cyclic carbonates. The scanning electron microscopic profiles of resulting polymers were measured to understand the morphological change during biodegradation. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3572–3588, 2003     

improvement of the Specificity of Surface Plasmon Resonance with BSA-modified Chip

Recently, surface plasmon resonance (SPR) become more and more popular without the need of the label technology1-3. However, sometimes, a number of experimental artifacts complicate the final biosensor analysis4-7. The utilization of a reference surface c…     

铜在3%NaCl溶液中腐蚀行为的光电化学研究

Cu以其优异的导电性、导热性和易加工性广泛用于工农业生产中．自然Cu的腐蚀和防腐成为人们很关注的问题．人们已经注意到，Cl-对Cu的腐蚀有影响，并进行过一些研究．但目前使用光电化学方法研究这一问题的文章尚不多见，特别是利用测量开路光电压及其瞬态波形这一现场的、无损的、灵敏的监测方法研究户对Cu电极腐蚀全过程的文章尚未见到．本文正是利用如上方法及XPS，AES方法，研究了Cl-对Cu电极腐蚀的全过程，取得了一些有意义的结果．1实验方法Cu电极用99．99％（质量分数）的Cu制成，面积约为39mm2；电极底部由Cu导线焊接引出，…