The increase of iron phytoavailability in soils ammended with paper mill sludge

In soils characterized by low organic matter and high pH values (7.5-8.59) iron availability to plants is limited even if the content of total Fe(III) is high. We have studied by Hordeum distichum plants the capability of paper mill sludge to increase the iron phytoavailable fraction in an alkaline soil. The effect of paper mill sludges adding to an iron-deficient soil was evaluated both considering the phyto-available fraction of iron and the distribution of organic carbon (hydrophobic, fulvic and humic carbon) in the soil before and after sludge adding. Iron concentration was determined in the different portions of Hordeum distichum plants grown on soils with and without paper mill sludges. Application of paper mill sludge induces an increase in the concentration of available Fe. This effect is probably due to the production of Fe chelators by soil microorganisms acting on sludge organic matter. The Fe chelators produced result in the solubilization of not soluble Fe-complexes present in the soil.     

Bioconversion of Kraft Paper Mill Sludges to Ethanol by SSF and SSCF

Paper mill sludge is a solid waste material composed of pulp residues and ash generated from pulping and paper making processes. The carbohydrate portion of the sludge has chemical and physical characteristics similar to pulp. Because of its high carbohydrate content and well-dispersed structure, the sludges can be biologically converted to value-added products without pretreatment. In this study, two different types of paper mill sludges, primary sludge and recycle sludge, were evaluated as a feedstock for bioconversion to ethanol. The sludges were first subjected to enzymatic conversion to sugars by commercial cellulase enzymes. The enzymatic conversion was inefficient because of interference by ash in the sludges with the enzymatic reaction. The main cause was that the pH level is dictated by CaCO₃ in ash, which is two units higher than the pH optimum of cellulase. To alleviate this problem, simultaneous saccharification and cofermentation (SSCF) using cellulase (Spezyme CP) and recombinant Escherichia coli (ATCC-55124), and simultaneous saccharification and fermentation (SSF) using cellulase and Saccharomyces cerevisiae (ATCC-200062) were applied to the sludges without any pretreatment. Ethanol yields of 75–81% of the theoretical maximum were obtained from the SSCF on the basis of total carbohydrates. The yield from the SSF was also found to be in the range of 74–80% on the basis of glucan. The SSCF and SSF proceeded under stable condition with the pH staying near 5.0, close to the optimum for cellulase. Decrease of pH occurred due to carbonic acid and other organic acids formed during fermentation. The ash was partially neutralized by the acids produced from the SSCF and SSF and acted as a buffer to stabilize the pH during fermentation. When the SSF and SSCF were operated in fed-batch mode, the ethanol concentration in the broth increased from 25.5 and 32.6 g/L (single feed) to 45 and 42 g/L, respectively. The ethanol concentration was limited by the tolerance of the microorganism in the case of SSCF. The ethanol yield in fed-batch operation decreased to 68% for SSCF and 70% for SSF. The high-solids condition in the bioreactor appears to create adverse effects on the cellulase reaction.     

Production of Cellulase from Kraft Paper Mill Sludge by Trichoderma Reesei Rut C-30

Paper mill sludge is a solid waste material generated from pulping and papermaking operations. Because of high glucan content and its well-dispersed structure, paper mill sludges are well suited for bioconversion into value-added products. It also has high ash content originated from inorganic additives used in papermaking, which causes hindrance to bioconversion. In this study, paper mill sludges from Kraft process were de-ashed by a centrifugal cleaner and successive treatment by sulfuric acid and sodium hydroxide, and used as a substrate for cellulase production. The treated sludge was the only carbon source for cellulase production, and predominantly inorganic nutrients were used as the nitrogen source for this bioprocess. The cellulase enzyme produced from the de-ashed sludge exhibited cellulase activity of 8 filter paper unit (FPU)/mL, close to that obtainable from pure cellulosic substrates. The yield of cellulase enzyme was 307 FPU/g glucan of de-ashed sludge. Specific activity was 8.0 FPU/mg protein. In activity tests conducted against the corn stover and α-cellulose, the xylanse activity was found to be higher than that of a commercial cellulase. Relatively high xylan content in the sludge appears to have induced high xylanase production. Simultaneous saccharification and fermentation (SSF) was performed using partially de-ashed sludge as the feedstock for ethanol production using Sacharomyces cerevisiae and the cellulase produced in-house from the sludge. With 6% (w/v) glucan feed, ethanol yield of 72% of theoretical maximum and 24.4 g/L ethanol concentration were achieved. These results were identical to those of the SSF using commercial cellulases.     

The effect of acid treatment on the pyrolysis behavior of sewage sludges

One sewage sludge (SLA) from Ávila region (Spain) was selected and used as raw material in order to study the influence of acid treatment on the pyrolysis behavior of sewage sludges. SLA was heat treated with acid solutions at pH 1 and pH 2 leading to SLA-1 and SLA-2, respectively. Characterization of samples has showed that acid treatment leads to metals removal and modifications in the organic matter composition of sewage sludge. Pyrolysis of three samples showed that SLA and SLA-1 have a similar pyrolysis behavior whereas SLA-2 shows a slightly extended temperature interval for pyrolysis, beginning at lower temperature and finishing at higher temperatures.     

The effect of acid treatment on the pyrolysis behavior of sewage sludges

One sewage sludge (SLA) from Ávila region (Spain) was selected and used as raw material in order to study the influence of acid treatment on the pyrolysis behavior of sewage sludges. SLA was heat treated with acid solutions at pH 1 and pH 2 leading to SLA-1 and SLA-2, respectively. Characterization of samples has showed that acid treatment leads to metals removal and modifications in the organic matter composition of sewage sludge. Pyrolysis of three samples showed that SLA and SLA-1 have a similar pyrolysis behavior whereas SLA-2 shows a slightly extended temperature interval for pyrolysis, beginning at lower temperature and finishing at higher temperatures.     

Changes in copper, lead and zinc concentrations in plants from paper mill sludge-treated soils

Effects of paper mill sludge addition on the availability of metals were studied on different soils both laboratory and naturally polluted; copper, lead and zinc concentrations were determined in Hordeum Distichum plants grown on the untreated and on sludge-treated soils. In some case a decrease of metal concentration is observed on sludge-treated soils; these results are consistent with the reduction of metal mobile forms in the soil, before plant growth. The decrease of metal availability in sludge-treated soils may be related with the pH value of the soil after sludge addition.     

Adsorption of heavy metal ions on galvanic sludges and disposal of the sludges in soil

The sorption capacity of ferritized galvanic sludge toward nickel(II), zinc(II), and copper(II) ions was studied. Sorption isotherms were plotted, and quantitative characteristics of adsorption were determined. Ferritized sludges are stable in the natural environment and thus can be disposed of in soil in an environmentally friendly way.     

Paper mill sludge-soil mixture: kinetic and thermodynamic tests of cadmium and lead sorption capability

Paper mill sludge (characterized by 29.0% of organic substances such as cellulose, lignin and tannins and 71.0% of inorganic substances such as kaolinite and carbonates) was studied in a mixture with soil in order to evaluate its effects on soil capability for retaining heavy metals. Attention was focused on cadmium and lead sorption and two parameters were investigated, the contact time of paper mill sludge-soil mixture and the paper mill sludge-soil ratio in the mixture. Results showed that paper mill sludge and soil interact to form ‘new’ sorbing sites. Taking into account sorption results of lead, the retention of which by soil is substantially increased by sludge addition, can highlight this modification. Also, the amount of sorbed cadmium was increased by sludge addition.     

染料的生物污泥吸附

综述了活性污泥、厌氧污泥、干污泥、不同方法失活的污泥等对42种染料的吸附结果,并对生物污泥吸附过程中适用的吸附等温线进行了总结,同时讨论了pH、温度、染料初始浓度、干污泥的粒径、离子强度、生物污泥有无活性等因素对生物污泥吸附的影响,并对今后的研究重点进行了展望。     

Conversion of Industrial Paper Sludge to Ethanol: Fractionation of Sludge and Its Impact

Paper sludge is an attractive biomass source for the conversion to ethanol due to its low cost and the lack of severe pretreatment required. Four sludges from pulp and paper operations including both virgin kraft (VK) and recycled and deinking (RD) paper mills were analyzed. A fractionation process using a laboratory screen was utilized to produce a fiber-rich stream for enzymatic hydrolysis. This process removed 82–98 % of the ash with fiber yields from 39 to 69 %. Even though sludges in both non-fractionated and fractionated scenarios were pH-adjusted, total sugar conversion was still improved by 12–27 % by fractionation with 4.5 times less acid required for pH adjustment. Fermentation of the fractionated sludges showed very high ethanol yields. Acid insoluble clay adsorbs 3–5 mg enzyme per gram of clay depending on enzyme dosage. Acid soluble CaCO₃ adsorbs about half of the enzyme compared to clay. Fractionation efficiency was also evaluated by testing different size mesh screen openings (100 to 500 mesh). The 400-mesh screen presented the best fiber yield, ash removal and ash fractionation ratio for both VK and RD sludges. The ash-rich streams have a lower C/N ratio than the original sludge which improves its suitability as soil amendment.     

Application of Leaching Tests for the Assessment of Available Heavy Metals from Domestic and Industrial Sludges

Various sludge samples from different domestic and industrial wastewater treatment plants were analyzed by Flame Atomic Absorption Spectrometry to evaluate their total and available contents of heavy metals (Cu, Cr, Ni, Pb, Zn and Fe). The EDTA and acetic acid single extraction procedures were applied to these samples with the aim to study the leaching behaviour of the metals in the different sludges and also to predict their possible mobility when these wastes are disposed on the environment and landfills. In acidic medium, a higher extraction efficiency was observed for the major part of the elements studied in the industrial sludges, except for Ni and Zn, which were also considerably released from domestic sludges. In contrast, in the presence of the EDTA complexing ligand, a more elevated mobility of metals was found in the domestic sludges and little or no metals were released from the industrial sludges. Moreover, the results of the microwave total digestions were compared, for all metals, with those obtained using a more simplified pseudototal digestion procedure (based on the EPA Method 3051, named microwave assisted acid digestion of sediments, sludges, soils and oils) and a good agreement was found between them, except for Cr and Ni in some particular samples. The between-batch precision (expressed as RSD) of both compared digestion methods was very similar and values lower than 7.7% were obtained in both cases. A certified domestic sludge material (SRM 2781) was employed to validate the two digestion procedures and no significant differences were found between the certified and experimental values for all the elements studied.     

Soil contamination by some organic micropollutants related to sewage sludge spreading

The aim of the present publication is to give some information on soil contamination by 4 different micropollutant classes due to sewage sludge spreading. The soil under research shows an accumulation of light molecular weight PAHs and PCBs, DEHP and 4-NP just after spreading, but one month later the concentration of these micropollutant groups fall to the concentration detected just before the sludge spreading. As far as the soil concentration is concerned, only PAHs and PCBs are precipitation dependent. Some test plots, enriched during 10 years with fertilisers, pig-dung or sewage sludges show only an increase of the PAH concentrations of the plots amended with sludges. In the same way, the sewage sludge is chiefly responsible for the increase of PCBs in the soils, but pig-dung seems to contain quantities of these micropollutants which have to be taken into consideration.     

Soil Contamination by some Organic Micropollutants Related to Sewage Sludge Spreading

Abstract

The aim of the present publication is to give some information on soil contamination by 4 different micropollutant classes due to sewage sludge spreading.

The soil under reserch shown an accumulation of light molecular weight PAHs and PCBs, DEHP and 4-NP just after spreading, but one month later the con-centration of these micropollutant groups fall to the concentration detected just before the sludge spreding.

As far as the soil concentration is concerned, only PAHs and PCBs are precipitation dependent.

Some test plots, enriched during 10 years with fertilisers, pig-dung or sewage sludges show only an increse of the PAH concentrations of the plots amended with sludges. In the same way, the sewage sludge is chiefly responsible for the increase of PCBs in the soils, but pig-dung seems to contain quantities of these micropollutants which have to be taken into consideration.     

造纸污泥薄层干燥实验及动力学模型分析

通过造纸污泥薄层干燥实验,考察了温度对造纸污泥干燥特性的影响,引入薄层干燥模型对污泥干燥动力过程进行模拟。结果表明,泥层越薄和干燥温度越高,污泥干燥的速率就越快,当干燥温度从80℃上升到160℃时,相对应的最大干燥速率从0.008g/(g·min)上升到0.030g/(g·min);Modified page模型描述了薄层造纸污泥在烘箱中的干燥过程,应用Fick扩散模型,薄层造纸污泥在干燥温度为80℃～160℃时,有效扩散系数为2.2×10^-10m²/s~3.96×10^-10m²/s。通过Arrhenius方程建立温度和有效扩散系数之间的关系,得出水分扩散的活化能为9.435kJ/mol。     

Sludge of wastewater treatment plants as Co2+ ions sorbent

Sludges produced in huge amounts by wastewater treatment plants (WWTP) display high fertility properties; however, the presence of heavy metals restricts their use for agricultural purposes. Sorption capacity of sludge is generally much higher and it can also be considered as a cheap sorbent of heavy metals. The paper describes cobalt sorption by dried activated sludge (DAS) obtained from the aerobic phase of a WWTP. DAS was characterized by FT-IR spectroscopy, cation exchange capacity (CEC), and atomic absorption spectrometry (AAS) analysis. Sorption capacity of DAS (Q _eq) increased with the initial concentration (C ₀) of Co²⁺ (CoCl₂) within the range from 100 μmol g^?1 to 4000 μmol g^?1, reaching 15 μmol g^?1 and 200 μmol g^?1, respectively. The maximum uptake capacity (Q _max) at pH 6.0 calculated from the Langmuir isotherm model was (256 ± 9) μmol g^?1 for Co²⁺ ions. Obtained Q values were dependent on pH within the range from 3.0 to 7.0. Competitive effect of other bivalent cations such as Ni²⁺ in Co²⁺ sorption equilibrium was confirmed; which is in agreement with the hypothesis of the decisive role of ion-exchange mechanism in metal sorption. The obtained data are discussed from the point of view of potential utilization of sludges as sorbents, i.e. in non-agricultural application.     

Environmental application of gamma technology: Update on the Canadian sludge irradiator

Waste treatment and disposal technologies have recently been subjected to increasing public and regulatory scrutiny. Concern for the environment and a heightened awareness of potential health hazards that could result from insufficient or inappropriate waste handling methods have combined to push waste generators in their search for new treatment alternatives. Gamma technology can offer a new option for the treatment of potentially infectious wastes, including municipal sewage sludge.

Sewage sludge contains beneficial plant nutrients and a high organic component that make it ideal as a soil conditioning agent or fertilizer bulking material. It also carries potentially infectious microorganisms which limit opportunities for beneficial recycling of sludges. Gamma irradiation-disinfection of these sludges offers a reliable, fast and efficient method for safe sludge recycling.

Nordion International's Market Development Division was created in 1987 as part of a broad corporate reorganization. It was given an exclusive mandate to develop new applications of gamma irradiation technology and markets for these new applications. Nordion has since explored and developed opportunities in food irradiation, pharmaceutical/cosmetic products irradiation, biomedical waste sterilization, airline waste disinfection, and sludge disinfection for recycling. This paper focuses on the last of these -a proposed sludge recycling facility that incorporates a cobalt 60 sludge irradiator.     

Monitoring 60Co activity for the characterization of the sorption process of Co2+ ions in municipal activated sludge

In large volumes produced activated sludges from wastewater treatment plants (WWTPs) with low concentrations of heavy metals can be utilized as agricultural fertilizers and soil conditioners. Increased contents of toxic xenobiotics are limiting factors that affect the utilization of these heterogeneous wastes. The main aim of our paper was to show the utilization of dried activated sludge (DAS) from municipal WWTP as potential Co²⁺ ions sorbent i.e. for non-agricultural purposes. The radio indicator method by radionuclide ⁶⁰Co and γ-spectrometry for characterization DAS sorption properties was used. DAS soluble and solid fractions were characterized by biochemical, ETAAS and CEC analysis. The sorption of Co²⁺ ions by DAS was rapid process and equilibrium was reached within 2 h. Sorption capacity of DAS (Q) increased with the initial concentration of CoCl₂ in the range from 100 to 4,000 μmol l^?1, reaching 20 and 160 μmol g^?1. Obtained Q values were depent on pH value from 2.0 to 8.0. The maximum sorption capacity (Q _max) of DAS at pH 6 calculated from mathematical model of Langmuir adsorption isotherm was 175 ± 9 μmol g^?1. FT-IR analyses showed the crucial role of carboxyl functional groups of DAS surfaces on cobalt uptake. For confirmation ion-exchange mechanism in sorption process of Co²⁺ ions by DAS scanning electron microscopy and EDX analysis were used.     

造纸污泥添加剂对麦秆灰烧结熔融特性的影响

利用灰熔点测试仪、XRD及XRF等仪器,对比研究了造纸污泥(脱墨污泥、造纸废水污泥)、城市废水污泥作为添加剂对麦秆灰熔融特性的影响,考察了烧结和熔融过程中的组分变化,分析了污泥添加剂对麦秆灰的作用机理;进一步将污泥添加剂与常规添加剂进行灰熔融特性对比研究。研究发现,添加比例控制为3%-10%,造纸污泥(脱墨污泥、造纸废水污泥)软化温度提升效果均优于城市废水污泥;在添加比例控制为5%时,造纸废水污泥对麦秆灰软化温度提升效果最好;增大添加比例过程中,造纸废水污泥Al_2O_3修饰骨架作用明显,但灰中长石类物质逐渐增多使得软化温度提升效果下降;在不同温度下,脱墨污泥主要是通过形成硅铝榴石使得灰熔点提升,造纸废水污泥则主要是通过生成高熔点物质CaSiO_3抑制低熔点硅酸盐形成,城市废水污泥升温中存在明显SiO_2晶态转变过程;使用污泥添加剂作为抗结渣添加剂具有良好应用前景。     

Comparison studies adsorption of thorium and uranium on pure clay minerals and local Malaysian soil sediments

Adsorption studies of thorium and uranium radionuclides on 9 different pure clay minerals and 4 local Malaysian soil sediments were conducted. Solution containing dissolved thorium and uranium at pH 4.90 was prepared from concentrate sludges from a long term storage facility at a local mineral processing plant. The sludges are considered as low level radioactive wastes. The results indicated that the 9 clay minerals adsorbed more uranium than thorium at pH ranges from 3.74 to 5.74. Two local Malaysian soils were observed to adsorb relatively high concentration of both radionuclides at pH 3.79 to 3.91. The adsorption value 23.27 to 27.04 ppm for uranium and 33.1 to 50.18 ppm for thorium indicated that both soil sediments can be considered as potential enhanced barrier material for sites disposing conditioned wastes containing uranium and thorium.     

金华市城市污水处理厂污泥成分及农用价值分析

为确定金华市城市污水处理厂污泥资源化利用途径,对金华市某污水处理厂的脱水污泥进行了采样和成分分析.结果表明,所有污泥为中性,pH 6.89,含水率较高75%;污泥中有机质、氮、磷、钾含量丰富;污泥中重金属的含量较低,均符合国家农用污泥中污染物控制标准.以此为基础对污泥的农用价值及其应用前景作了分析和展望.