Electrophoretic investigation of the boron cluster anion [7-(2'-pyridyl)-nido-7,8-dicarbaundecaborate]- and its protonated zwitterionic product

ACN is a better solvent than methanol for both [NMe(4)] [7-(2'-pyridyl)-nido-7,8-C(2)B(9)H(11)] and its protonated anion. The investigated laboratory preparations of the salt and of its protonated anion are electrophoretically pure solids stable for 2 months at 4 degrees C. At a longer storage, the solid salt is more stable than the solid protonated anion. In the 40:60 v/v water-methanol solvent, decomposition products of the salt anion are detectable after one-week storage of the salt solution at 4 degrees C. The protonated anion does not decompose for almost 1 year in water-organic solutions at 4 degrees C. The exchange of the proton between the protonated anion and the solution is reversible and fast at room temperature. The pH dependence of the mobility of the [7-(2(-pyridyl)-nido-7,8-C(2)B(9)H(11)](-) anion reveals that the basicity of the nitrogen atom in the pyridine ring is not significantly affected by the bonding of the pyridyl group to the nido-7,8-C(2)B(9)H(11) cluster in position 7 and that the proton from the solution is accepted by the nitrogen atom in the 2-pyridyl ring. The UV-spectra of the salt and of its protonated anion indicate that the accepted proton is probably slightly shifted to the open face of the nido-7,8-C(2)B(9)H(11) cluster. The [1](-) is chiral.     

Synthesis, reactivity and complexation studies of N,S exo-heterodisubstituted o-carborane ligands. Carborane as a platform to produce the uncommon bidentate chelating (pyridine)N-C-C-C-s(H) motif

The synthesis of N,S-heterodisubstituted 1-(2'-pyridyl)-2-SR-1,2-closo-C2B10H10 compounds (R = Et, 2; R = (i)Pr, 3) has been accomplished starting from 1-(2'-pyridyl)-l,2-closo-C2B10H11 (1), and their partial deboronation reaction leading to the structurally chiral [7-(2'-pyridyl)-8-SR-7,8-nido-C2B9H10]-derivatives (R = Et, [4]-; R = (i)Pr, [5]-) has been studied. Capillary electrophoresis combined with the chiral selector alpha-cyclodextrin has permitted the separation of the electrophoretically pure racemic [7-(2'-pyridyl)-8-SR-7,8-nido-C2B9H11]- ions into two peaks each one corresponding to the interaction of one enantiomer with the alpha-cyclodextrin. The N,S-heterodisubstituted o-carborane containing a mercapto group, 1-(2'-pyridyl)-2-SH-1,2-closo-C2B10H10, 1, is one of the two examples of a rigid bidentate chelating (pyridine)N-C-C-C-S(H) motif having been structurally fully characterized. To study the potential of such a binding site, 1 has been tested as a ligand with metal ions requiring different coordination numbers, two (Au(+)) and four (Pd2+ and Rh+). The crystal structures of the Pd(II) and Au(I) complexes are reported. For the Pd(II) complex, 1 acts as a bidentate ligand whereas for Au(I), 1 acts as a monodentate ligand through the thiolate.     

"Water-stable boron-iodinated dicarbollide dianions [7,8-nido-C2H2B9I9]2- and [7,8-nido-C2H2B9I8H]2-"

The reaction of 3,4,5,7,8,9,10,11,12-I(9)-1,2-closo-C(2)B(10)H(3) with KOH/EtOH gave a mixture of the boron periodinated [1,2,3,4,5,6,9,10,11-I(9)-7,8-nido-C(2)B(9)H(2)](2-) and the highly iodinated on boron [1,2,4,5,6,9,10,11-I(8)-7,8-nido-C(2)B(9)H(3)](2-) in approximately 50% each. Moreover, 3,4,5,6,7,8,9,10,11,12-I(10)-1,2-closo-C(2)B(10)H(2) was reacted with KOH/EtOH to purely produce [1,2,3,4,5,6,9,10,11-I(9)-7,8-nido-C(2)B(9)H(2)](2-). It is the first dinegative dicarbollide stable in water or protic solvent reported in literature.     

Electrophilic substitution of the nido-dicarbaborate anion 7,8-nido-C2B9H12- with sulfenyl chlorides

Sulfenyl chlorides RSCl (R = p-C(6)H(4)OMe, Ph, p-C(6)H(4)NO(2), CN or 2-C(5)H(4)N) react with 7,8-nido-C(2)B(9)H(12)(-) with asymmetric substitution on the pentagonal C(2)B(3) face to give 9-RS-7,8-nido-C(2)B(9)H(11)(-) (R = p-C(6)H(4)OMe (3), Ph (4), p-C(6)H(4)NO(2) (5), CN (6)) and the zwitterion 9-(S-2-C(5)H(4)NH)-7,8-nido-C(2)B(9)H(11) (7), respectively, in high yield, while tBuSCl did not react and S(2)Cl(2) led to decomposition. Further reaction of 5-7 with iodine gave the corresponding iodo derivatives NMe(4) [9-I-11-RS-7,8-nido-C(2)B(9)H(10)] (R = p-C(6)H(4)NO(2) (8), CN (9)) and the zwitterion 9-I-11-(S-2-C(5)H(4)NH)-7,8-nido-C(2)B(9)H(11) (10), respectively. Compounds 3-10 were fully characterised by (1)H, (11)B, (11)B{(1)H}, (13)C{(1)H} spectroscopy, IR spectroscopy, mass spectrometry and elemental analysis, 3-7 also by (11)B-(11)B{(1)H} COSY NMR spectroscopy and 8-10 by X-ray structure determination.     

Synthesis, reactivity and structural studies of carboranyl thioethers and disulfides

The equimolar reaction of 1-SH-2-R-1,2-closo-C2B10H10(R=Me, H, Ph) with KOH in ethanol produces the thiolate species [1-S-2-R-1,2-closo-C2B10H10]-. These react with iodine to give the disulfide bridged dicluster (1-S-2-R-1,2-closo-C2B10H10)2(R=H, Me, Ph) compounds as analytically pure, white and air-stable solids in high yield. Synthesis of monothioether bridged species is synthetically more difficult. In fact three procedures have been tested to obtain the thioether bridged dicluster compounds (2-R-1,2-closo-C2B10H10)2S (R=Me, H, Ph) but only (2-Me-1,2-closo-C2B10H10)2S was successfully synthesized and characterized. Attempts to produce mixed compounds (1-R-1,2-closo-C2B10H10)S(1-R'-1,2-closo-C2B10H10), R not=R', were unsuccessful. Deboronation reaction of this dicarboranylthioether lead, depending on the reaction conditions, to monoanionic [(2-Me-1,2-closo-C2B10H10)S(8-Me-7,8-nido-C2B9H10)]- or dianionic [(8-Me-7,8-nido-C2B9H10)2S]2- sulfur bridge anions. Deboronation of carboranyl disulfides gave the corresponding dianionic [(7-S-8-R-7,8-nido-C2B9H10)2]2-(R=H, Me, Ph) species. This reaction was very dependent, however, on the reaction conditions. With slight variation of the reaction conditions, splitting of the S-S bond leading to the thiolate species with retention of the closo cluster was also found. Carboranyl disulfides (1-S-2-R-1,2-closo-C2B10H10)2(R=H, Me, Ph) do not lead to thiosulfinates R-S(O)-S-R' by oxidation with H2O2 or I2 as organic disulfides do. This behaviour is attributed to the presence of the sulfur atom directly bonded to the carbon cluster that produces electronic transfer from the filled orbitals on the sulfur atom into the cage LUMO (largely located on the cage Cc-Cc bond). This causes a depletion of electron density on the sulfur, thence impairing sulfur oxidation, and facilitating S-S breaking. Crystal structures of monothioethers (2-Me-1,2-closo-C2B10H10)2S, [NMe4][(2-Me-1,2-closo-C2B10H10)S(8-Me-7,8-nido-C2B9H10)](the first example reported in the literature of a two cluster compound incorporating the closo C2B10 and the nido[C2B9]- moieties linked by a one member spacer) and disulfides (1-S-1,2-closo-C2B10H11)2, (1-S-2-Me-1,2-closo-C2B10H10)2, (1-S-2-Ph-1,2-closo-C2B10H10)2 are reported which support the behaviour of these species.     

Mild mono and double demethylation in dimethylsulfonium substituted ruthenacarborane complexes. A regioselective reaction

Reaction of [RuCl(2)(eta(6)-C(6)H(6))](2) with [10-(CH(3))(2)S-7,8-nido-C(2)B(9)H(10)](-) or [9-(CH(3))(2)S-7,8-nido-C(2)B(9)H(10)](-) afforded the expected cationic complexes [Ru(eta(5)-n-(CH(3))(2)S-7,8-C(2)B(9)H(10))(eta(6)-C(6)H(6))](+)(n= 10, (1); 9, (3)), but also the unexpected neutral Ru(eta(5)-10-HS-7,8-C(2)B(9)H(10))(eta(6)-C(6)H(6))(2) or Ru(eta(5)-9-(CH(3))S-7,8-C(2)B(9)H(10))(eta(6)-C(6)H(6))(4) by double and mono demethylation of the (CH(3))(2)S moiety, respectively.     

Contribution of the nido-[7,8-C2B9H10]- anion to the chemical stability, basicity, and 31P NMR chemical shift in nido-o-carboranylmonophosphines

The icosahedral dicarboranes and their decapitated anion, 1-R'-1,2-C(2)B(10)H(10) (closo) and [7-R'-7,8-C(2)B(9)H(10)](-) (nido), exert a distict influence at the alpha position of substituents attached to the cage carbon atom. The closo fragment is electron-withdrawing while the nido anion is electron-releasing. These effects are studied by (31)P NMR, phosphorus oxidation, and phosphorus protonation in [7-PR(2)-8-R'-7,8-C(2)B(9)H(10)](-) species. The (31)P NMR chemical shift dependence is related to the R alkyl or aryl nature of [7-PR(2)-8-R'-7,8-C(2)B(9)H(10)](-). No direct relationship to the nature of the R substituent on the nido-carboranylmonphosphine toward oxidation has been found. The basicity of the nido-alkylcarboranylmonophosphines is the highest while the lowest corresponds to the nido-arylcarboranylmonophosphines. Interpretation can be carried out qualitatively by considering the electronic properties of the cluster and the nature of the R groups. The influence of R' is less relevant. Confirmation of the molecular structure of the oxidated and protonated nido-carboranylmonophosphine compounds was obtained by X-ray diffraction analysis of [NBu(4)][7-P(O)Ph(2)-8-Ph-7,8-C(2)B(9)H(10)] and [7-PH((i)Pr)(2)-8-Me-7,8-C(2)B(9)H(10)].     

Novel titanium complexes of a multidentate dicarbollide ligand. Synthesis and structural characterization of a constrained geometry complex

The multidentate dicarbollide ligand nido-7,8-(NMe2CH2)2-7,8-C2B9H11 has been prepared, structurally characterized, and employed in the preparation of the novel mono- and trimetallic titanium complexes [eta5:eta1-(NMe2CH2)C2B9H9CH2NMe2]Ti(NMe2)2 and [eta5:eta1-[(NMe2CH2)C2B9H9CH2NMe2]Ti(NMe2)]2-mu3-O-Ti(NMe2)2.     

The [2,5,12-C3B8H15]- anion, the first representative of the eleven-vertex hypho family of tricarbaboranes

In one synthetic step from the readily available 9-Me(2)SCH(2)-nido-7,8-C(2)B(9)H(11) (compound 1), the first representative of the eleven-vertex hypho family of tricarbaboranes, [2,5,12-C(3)B(8)H(15)][X] (X=[NMe4]+ or [PPh4]+) (compound 2), has been isolated in 32% yield and structurally characterised by single-crystal X-ray diffraction, multi-nuclear NMR spectroscopy, mass spectrometry, and computational methods. Both [NMe4]+ or [PPh4]+ salts of anion 2 were found to undergo degradative conversion to the [hypho-6,7-C(2)B(6)H(13)]- anion (anion 3) in alkaline medium. The [PPh4]+ salt of anion 2 converted quantitatively to the [6-CH3-arachno-5,10-C(2)B(8)H(12)]- anion (anion 4) if passed through a silica column or to the neutral 5-CH3-arachno-6,9-C(2)B(8)H(13) (compound 5) on treatment of its [NMe4]+ salt with dilute HCl. Moreover, the reaction of compound 2 with [RhCl2(C(5)Me(5))]2 afforded the eleven-vertex ruthenadicarbaborane [1-C(5)Me(5)-4-CH(3)-closo-1,2,3-RhC(2)B(8)H(9)] (compound 8). All these reactions resulted in an extrusion of one of the cluster carbon atoms into an exoskeletal position.     

Synthesis and reactivity of 4,5-[1,2-dicarba-closo-dodecaborano(12)]-1,3-diselenacyclopentane: opening of the icosahedron to give a zwitterionic intermediate and conversion into 7,8-dicarba-nido-undecaborate(1-)

The reaction of the 1,2-diselenolato-1,2-dicarba-closo-dodecaborane(12) dianion [1,2-(1,2-C(2)B(10)H(10))Se(2)](2-) with dichloromethane (CH(2)Cl(2) or CD(2)Cl(2)) in the presence of donor solvents gave 4,5-[1,2-dicarba-closo-dodecaborano(12)]-1,3-diselenacyclopentane, the title compound, which was characterized by X-ray structural analysis and NMR spectroscopy ((1)H, (11)B, (13)C, and (77)Se). In the presence of pyridine, opening of the icosahedron took place, and a zwitterionic intermediate was isolated and fully characterized in the solid state by X-ray diffraction and in solution by multinuclear magnetic resonance techniques. Although such types of intermediates, prior to deboronation of the ortho-carborane cage, have been proposed several times, this is first example for which the structure has been confirmed unambiguously. This intermediate possesses a nido structure and contains a 7,8-dicarba-nido-undecaborate(1-) anion and a boronium cation, the latter with two pyridine rings linked to the boron atom, which has been extruded from the cage. It was shown that this process is reversible as long as the deboronation is not complete. The formation of the intermediate is accompanied by deboronation, which leads to the 7,8-dicarba-nido-undecaborate(1-) anion. The latter was prepared independently by conventional routes from the title compound, isolated as crystalline material as the tetrabutyl ammonium salt, and characterized by X-ray structural analysis and multinuclear magnetic resonance spectroscopy ((1)H, (11)B, (13)C, and (77)Se).     

Syntheses and crystal structures of the closo-borates M2[B7H7] and M[B7H8] (M = PPh4, PNP, and N(n-Bu4)): the missing crystal structure in the series [B(n)H(n)]2- (n = 6-12)

Oxidation of [N(n-Bu(4))](2)[B(9)H(9)] with oxygen in a mixture of dimethoxyethane and CH(2)Cl(2) leads to salts of the [B(7)H(7)](2-) dianion. This is the first convenient synthesis for a seven-vertex hydro-closo-borate anion. Protonation with NEt(3)·HCl resulted in salts of the [B(7)H(8)](-) monoanion. Both closo-borate anions were isolated and characterized by (1)H, (1)H{(11)B}, (11)B, and (11)B{(1)H} NMR spectroscopy. The temperature-dependent (1)H{(11)B}, (11)B, and (11)B{(1)H} NMR spectra of [B(7)H(8)](-) were also measured. The structure of [B(7)H(7)](2-) as well as of [B(7)H(8)](-) were determined by single-crystal X-ray diffraction.     

The structure and chemistry of tris(pentafluorophenyl)borane protected mononuclear nitridotitanium complexes

Treatment of TiCl(NMe(2))(3) with H(3)N·B(C(6)F(5))(3) results in N-H activation and ligand exchange to yield the structurally characterised salt [TiCl(NMe(2))(2)(NMe(2)H)(2)](+)[Ti[triple bond]NB(C(6)F(5))(3)(Cl)(2)(NMe(2)H)(2)](-). Cation exchange with [Me(4)N]Cl, [Ph(4)P]Cl and [(PhCH(2))Ph(3)P]Cl yields the respective ammonium and phosphonium salts of the [Ti[triple bond]NB(C(6)F(5))(3)(Cl)(2)(NMe(2)H)(2)](-) anion. X-ray crystallography reveals that the essential trigonal bipyramidal geometry and composition of the anion is retained in each of these salts despite some minor variations in the Ti-N-B angle and the nature of the interionic interactions. Electronic investigation by DFT calculations confirmed the Ti-N triple bond character implied by the experimentally determined bond length, with the HOMO and HOMO-1 having Ti-N π-bonding character. The dimethylamine ligands of the anion resist substitution by moderate bases but can be displaced by pyridine to give a pentacoordinate anion. In contrast, addition of 2,2'-bipyridyl gives a neutral octahedral complex. Treatment of the pyridine complex with TlCp results in the formation of a four coordinate anionic cyclopentadienyl complex.     

Highly stable neutral and positively charged dicarbollide sandwich complexes

Novel sandwich metallacarboranes commo-[3,3'-Ni(8-SMe2-1,2-C2B9H10)2] (1), commo-[3,3'-Co(8-SMe2-1,2-C2B9H10)2]+ (2+), commo-[3,3'-Ru(8-SMe2-1,2-C2B9H10)2] (4) and commo-[3,3'-Fe(8-SMe2-1,2-C2B9H10)2] (5) have been prepared by reaction of [10-SMe2-7,8-nido-C2B9H10]- with NiCl2 x 6 H2O, CoCl2, [RuCl2(dmso)4] and [FeCl2(dppe)], respectively. Reduction of 2+ with metallic Zn leads to the neutral and isolable complex commo-[3,3'-Co(8-SMe2-1,2-C2B9H10)2] (3). Theoretical calculations using the ZINDO/1 semiempirical method show three energy minima for complexes 1-3 and 5 that agree with the presence of three different rotamers in solution at low temperature, while four relative energy minima have been found for 4. The calculated rotational energy barriers for complexes 1-5 have been found in the range 5.2+/-0.2 and 11.5+/-0.2 kcal mol(-1). These values are in agreement with the experimental data calculated for complexes 2+ and 5. Only one rotamer is found in the X-ray crystal structure of complexes 1-3, while two are observed for 4. Neutral complexes 1, 3 and 4 exhibit a gauche conformation, whereas a cisoid conformation is found for the 2+ ion. Rotamers evident from X-ray diffraction studies are in agreement with the global energy minimum calculated by the ZINDO/1 method. The electrochemical studies conducted on 1, 3, 4 and 5 support the proposal that the charge-compensated ligand [10-SMe2-7,8-nido-C2B9H10]- stabilises lower oxidation states in metals than the dianionic [7,8-nido-C2B9H11]2- and even the [C5H5]- ligands.     

Controlled direct synthesis of C-mono- and C-disubstituted derivatives of [3,3'-Co(1,2-C2B9H11)2]- with organosilane groups: theoretical calculations compared with experimental results

Mono- and dilithium salts of [3,3'-Co(1,2-C(2)B(9)H(11))(2)](-), (1(-)), react with different chlorosilanes (Me(2)SiHCl, Me(2)SiCl(2), Me(3)SiCl and MeSiHCl(2)) with an accurate control of the temperature to give a set of novel C(c)-mono- (C(c) = C(cluster)) and C(c)-disubstituted cobaltabis(dicarbollide) derivatives with silyl functions: [1-SiMe(2)H-3,3'-Co(1,2-C(2)B(9)H(10))(1',2'-C(2)B(9)H(11))](-) (3(-)); [1,1'-mu-SiMe(2)-3,3'-Co(1,2-C(2)B(9)H(10))(2)](-) (4(-)); [1,1'-mu-SiMeH-3,3'-Co(1,2-C(2)B(9)H(10))(2)](-) (5(-)); [1-SiMe(3)-3,3'-Co(1,2-C(2)B(9)H(10))(1',2'-C(2)B(9)H(11))](-) (6(-)) and [1,1'-(SiMe(3))(2)-3,3'-Co(1,2-C(2)B(9)H(10))(2)](-) (7(-)). In a similar way, the [8,8'-mu-(1',2'-C(6)H(4))-1,1'-mu-SiMe(2)-3,3'-Co(1,2-C(2)B(9)H(9))(2)](-) (8(-)); [8,8'-mu-(1',2'-C(6)H(4))-1,1'-mu-SiMeH-3,3'-Co(1,2-C(2)B(9)H(9))(2)](-) (9(-)) and [8,8'-mu-(1',2'-C(6)H(4))-1-SiMe(3)-3,3'-Co(1,2-C(2)B(9)H(9))(1',2'-C(2)B(9)H(10))](-) (10(-)) ions have been prepared from [8,8'-mu-(1',2'-C(6)H(4))-3,3'-Co(1,2-C(2)B(9)H(10))(2)](-) (2(-)). Thus, depending on the chlorosilane, the temperature and the stoichiometry of nBuLi used, it has been possible to control the number of substituents on the C(c) atoms and the nature of the attached silyl function. All compounds were characterised by NMR and UV/Vis spectroscopy and MALDI-TOF mass spectrometry; [NMe(4)]-3, [NMe(4)]-4 and [NMe(4)]-7 were successfully isolated in crystalline forms suitable for X-ray diffraction analyses. The 4(-) and 8(-) ions, which contain one bridging -mu-SiMe(2) group between each of the dicarbollide clusters, were unexpectedly obtained from the reaction of the monolithium salts of 1(-) and 2(-), respectively, with Me(2)SiHCl at -78 degrees C in 1,2-dimethoxyethane. This suggests that an intramolecular reaction has taken place, in which the acidic C(c)-H proton reacts with the hydridic Si-H, with subsequent loss of H(2). Some aspects of this reaction have been studied by using DFT calculations and have been compared with experimental results. In addition, DFT theoretical studies at the B3 LYP/6-311G(d,p) level of theory were applied to optimise the geometries of ions 1(-)-10(-) and calculate their relative energies. Results indicate that the racemic mixtures, rac form, are more stable than the meso isomers. A good concordance between theoretical studies and experimental results has been achieved.     

Polyhedral monocarbaborane chemistry. Some C-phenylated seven, eight, nine, ten, eleven and twelve-vertex species

Some synthetic and structural systematics for monocarbaboranes, using the C-phenylated motif as the example, are investigated. The 10-vertex [6-Ph-nido-6-CB(9)H(11)](-) anion 1, from reaction of PhCHO with B(10)H(14) in KOH/H(2)O, is a useful entry synthon into C-phenyl monocarbaborane chemistry. Treatment of anion 1 with Na/thf yields the 10-vertex [1-Ph-closo-1-CB(9)H(9)](-) anion 2a, whereas treatment of anion 1 with iodine in alkaline solution yields the isomeric 10-vertex [2-Ph-closo-2-CB(9)H(9)](-) anion 2b, which isomerises quantitatively to 2a on heating under reflux in DME. Thermolysis of anion 1 yields the 9-vertex [4-Ph-closo-4-CB(8)H(8)](-) anion 5, whereas treatment of anion 1 with FeCl(3)/HCl gives neutral 9-vertex [4-Ph-arachno-4-CB(8)H(13)] 3. Compound 3 gives neutral 9-vertex [1-Ph-nido-1-CB(8)H(11)] 4 in refluxing toluene, and gives the 7-vertex [2-Ph-closo-2-CB(6)H(6)](-) anion 7 and the 8-vertex [1-Ph-closo-1-CB(7)H(7)](-) anion 6 in refluxing toluene with NEt(3). Reaction of 1 with [BH(3)(thf)] yields the 11-vertex [7-Ph-nido-7-CB(10)H(12)](-) anion 8 which can be converted to the 12-vertex [1-Ph-closo-1-CB(11)H(11)](-) anion 10 using [BH(3)(SMe(2))]; alternatively, anion 1 yields anion 10 directly on treatment with [BH(3)(NEt(3))]. Treatment of anion 8 with I(2)/KOH yields the 11-vertex [2-Ph-closo-2-CB(10)H(10)](-) anion 9. The structures of anions 1, 2a, 2b, 5, 6, 7, 8, 9 and 10 have been established by single-crystal X-ray diffraction analyses of their [NEt(4)](+) salts, and those of neutral 3 and 4 estimated by DFT calculations at the B3LYP/6-31G* level; similar calculations have also been applied to the new anionic closo species 2a, 2b, 5, 6, 7, 9 and 10. Crystals of the [NEt(4)](+) salt of the [2-Ph-closo-2-CB(6)H(6)](-) anion 7 required synchrotron X-radiation for sufficient diffraction intensity for molecular-structure elucidation. The syntheses are in principle generally applicable to give extensive derivative C-aryl and C-alkyl chemistries.     

The solid state structure of [b(10)h(11)](-) and its dynamic NMR spectra in solution

The structure of [PPh(3)(benzyl)][B(10)H(11)] was determined at -123 degrees C and 24 degrees C by single-crystal X-ray analyses. The B(10) core of [B(10)H(11)](-) is similar in shape to that of [B(10)H(10)](2)(-). The 11th H atom asymmetrically caps a polar face of the cluster and shows no tendency for disorder in the solid state. Variable temperature multinuclear NMR studies shed light on the dynamic nature of [B(10)H(11)](-) in solution. In addition to the fluxionality of the cluster H atoms, the boron cage is fluxional at moderate temperatures, in contrast to [B(10)H(10)](2)(-). Multiple exchange processes are believed to take place as a function of temperature. Results of ab initio calculations are presented. Crystal data: [PPh(3)(benzyl)][B(10)H(11)] at -123 degrees C, P2(1)/c, a = 9.988(2) A, b = 18.860(2) A, c = 15.072(2) A, beta = 107.916(8) degrees, V = 2701.5(7) A(3), Z = 4; [PPh(3)(benzyl)][B(10)H(11)] at 24 degrees C, P2(1)/c, a = 10.067(5) A, b = 19.009(9) A, c = 15.247(7) A, beta = 107.952(9) degrees, V = 2775(2) A(3), Z = 4.     

Monocarbaborane anion chemistry. [COOH], [CH2OH] and [CHO] units as functional groups on ten-vertex monocarbaborane anionic compounds

B(10)H(14) reacts with para-C(6)H(4)(CHO)(COOH) in aqueous KOH solution to give the [nido-6-CB(9)H(11)-6-(C(6)H(4)-para-COOH)](-) anion 1, which undergoes cage closure with iodine in alkaline solution to give the [closo-2-CB(9)H(9)-2-(C(6)H(4)-para-COOH)](-) anion 2. Upon heating, anion 2 rearranges to form the [closo-1-CB(9)H(9)-1-(C(6)H(4)-para-COOH)](-) anion 3. Similarly, B(10)H(14) with glyoxylic acid OHCCOOH in aqueous KOH gives the [arachno-6-CB(9)H(13)-6-(COOH)](-) anion 4, which undergoes cage closure with iodine in alkaline solution to give the [closo-2-CB(9)H(9)-2-(COOH)](-) anion 5. Upon heating, anion 5 rearranges to give the [closo-1-CB(9)H(9)-1-(COOH)](-) anion 6. Reduction of the [COOH] anions 3 and 6 with diisobutylaluminium hydride gives the [CH(2)OH] hydroxy anions [closo-1-CB(9)H(9)-1-(C(6)H(4)-para-CH(2)OH)](-) and [closo-1-CB(9)H(9)-1-(CH(2)OH)](-) 8 respectively. The [closo-1-CB(9)H(9)-1-(C(6)H(4)-para-CH(2)OH)](-) anion 7 can also be made via isomerisation of the [closo-2-CB(9)H(9)-2-(C(6)H(4)-para-CH(2)OH)](-) anion 9, in turn obtained from the [nido-6-CB(9)H(11)-6-(C(6)H(4)-para-CH(2)OH)](-) anion 10, which is obtained from the reaction of B(10)H(14) with terephthaldicarboxaldehyde, C(6)H(4)-para-(CHO)(2), in aqueous KOH solution. Oxidation of the hydroxy anions 7 and 8 with pyridinium dichromate gives the aldehydic [closo-1-CB(9)H(9)-1-(C(6)H(4)-para-CHO)](-) anion 11 and the aldehydic [closo-1-CB(9)H(9)-1-(CHO)](-) anion 12 respectively, characterised as their 2,4-dinitrophenylhydrazone derivatives, the [closo-1-CB(9)H(9)-1-C(6)H(4)-para-CH=N-NHC(6)H(3)(NO(2))(2)](-) anion 13 and the [closo-1-CB(9)H(9)-1-CH=N-NHC(6)H(3)(NO(2))(2)](-) anion respectively.     

Untethered 4,1,2-MC(2)B(10) supraicosahedral metallacarboranes, their C,C'-dimethyl 4,1,6-, 4,1,8- and 4,1,12-MC(2)B(10) analogues, and DFT study of the (4,)1,2- to (4,)1,6-isomerisations of C(2)B(11) carboranes and MC(2)B(10) metallacarboranes

Reduction of the tethered carborane 1,2-μ-(CH(2)SiMe(2)CH(2))-1,2-closo-C(2)B(10)H(10) followed by metallation with {CpCo} or {(p-cymene)Ru} fragments affords both C,C'-dimethyl 4,1,2-MC(2)B(10) and 4,1,6-MC(2)B(10) species. DFT calculations indicate that the barriers to isomerisation of both 4-Cp-4,1,2-closo-CoC(2)B(10)H(12) and 4-(η-C(6)H(6))-4,1,2-closo-RuC(2)B(10)H(12) to their respective 4,1,6-isomers are too high for this to be the origin of the unexpected formation of 4,1,6-MC(2)B(10) products (in marked contrast to the related isomerisation of 1,2-closo-C(2)B(11)H(13) to 1,6-closo-C(2)B(11)H(13)), and, indeed, the 4,1,2-species are recovered unchanged from refluxing toluene. Equally, the DFT-calculated profile for the isomerisation of [7,8-nido-C(2)B(10)H(12)](2-) to [7,9-nido-C(2)B(10)H(12)](2-) suggests that the unexpected formation of 4,1,6-metallacarboranes is unlikely to result from isomerisation of a reduced (nido) carborane following desilylation. Instead, the source of the 4,1,6-MC(2)B(10) compounds is traced to desilylation of 1,2-μ-(CH(2)SiMe(2)CH(2))-1,2-closo-C(2)B(10)H(10) by Li or Na prior to reduction. The supraicosahedral metallacarboranes 1,8-Me(2)-4-Cp-4,1,8-closo-CoC(2)B(10)H(10), 1,12-Me(2)-4-Cp-4,1,12-closo-CoC(2)B(10)H(10) and 1,12-Me(2)-4-(p-cymene)-4,1,12-closo-RuC(2)B(10)H(10) are also reported with all new species characterised both spectroscopically and crystallographically.     

Structural chemistry of arachno-nonaboranes

Single-crystal conventional-tube and synchrotron X-ray diffraction studies of the anions in [NMe(4)][arachno-B(9)H(12)-4,8-Br(2)] 1 and K[arachno-B(9)H(14)] 2, and also of the series of adducts [arachno-B(9)H(13)-4-L], where L is P(CCH)(3) (3), NHEt(2) (4), NC(5)H(5) (5), or NH(2)CH(2)Ph (6), are reported. Structural studies of 1-6, determined at low temperatures, located all atoms, including bridging and endo-terminal hydrogen atoms. The basic boron-hydride clusters of these, and of all the other known species with the arachno nine-vertex i-nonanborane geometry reported in the literature, are isostructural and feature three bridging and two endo-terminal hydrogen atoms on the open face. This arrangement is different from that previously reported for Cs[arachno-B(9)H(14)] 7 and for [arachno-B(9)H(13)-4-(NCMe)] 9. However, a new X-ray diffraction data set and refinement experimentally confirm the [3 x mu-H, 2 x endo] arrangement for 9 also. The experimental results for 1-6 support recently reported calculations for [B(9)H(14)](-), which predict both the structures and the (11)B NMR chemical shifts. These conclusions are also supported by calculations for 3, 4, and 9 and also for the [arachno-B(9)H(13)-4-(NCS)](-) anion in [NMe(4)][B(9)H(13)(NCS)] 8.     

(S)-(2-(2'-Pyridyl)ethyl)cysteamine and (S)-(2-(2'-pyridyl)ethyl)-d,l-homocysteine as ligands for the "fac-[M(CO)(3)](+)" (M = Re, (99m)Tc) core

The reaction of fac-[NEt(4)](2)[Re(CO)(3)Br(3)] with (S)-(2-(2'-pyridyl)ethyl)cysteamine, L(1), in methanol leads to the formation of the cationic fac-[Re(CO)(3)(NSN)][Br] complex, 1, with coordination of the nitrogen of the pyridine, the sulfur of the thioether, and the nitrogen of the primary amine. When fac-[NEt(4)](2)[Re(CO)(3)Br(3)] reacts with the homocysteine derivative (S)-(2-(2'-pyridyl)ethyl)-d,l-homocysteine, L(2), the neutral fac-Re(CO)(3)(NSO) complex, 2, is produced with coordination of the nitrogen of the primary amine, the sulfur of the thioether, and the oxygen of the carboxylate group, while the pyridine ring remains uncoordinated. The analogous technetium-99m complexes, 1' and 2', were also prepared quantitatively by the reaction of L(1) and L(2) with the fac-[(99m)Tc(CO)(3)(H(2)O)(3)](+) precursor at 70 degrees C in water. Given that both (S)-(2-(2'-pyridyl)ethyl)cysteamine and homocysteine can be easily N- or S-derivatized by a bioactive molecule of interest, both the NSN or NSO ligand systems could be used to develop target-specific radiopharmaceuticals for diagnosis and therapy.