Tuning electrochemical rectification via quantum dot assemblies

A novel approach to tuning electrochemical rectification using 2D assemblies of quantum dots (QDs) is presented. Asymmetric enhancement of the oxidation and reduction currents in the presence of the Fe(CN)(6)(3-/4-) redox couple is observed upon adsorption of QDs at thiol-modified Au electrodes. The extent of the electrochemical rectification is dependent on the average QD size. A molecular blocking layer is generated by self-assembling 11-mercaptoundecanoic acid (MUA) and an ultrathin film of poly(diallyldimethylammonium chloride) (PDADMAC) on the electrode. The polycationic film allows the electrostatic adsorption of 3-mercaptopropionic acid (MPA)-stabilized CdTe QDs, generating 2D assemblies with approximately 0.4% coverage. The QD adsorption activates a fast charge transfer across the blocking layer in which the reduction process is more strongly enhanced than the oxidation reaction. The partial electrochemical rectification is rationalized in terms of the relative position of the valence (VB) and conduction band (CB) edges with respect to the redox Fermi energy (ε(redox)). Quantitative analysis of the exchange current density obtained from electrochemical impedance spectroscopy demonstrates that the enhancement of charge transport across the molecular barrier is strongly dependent on the position of the QD valence band edge relative to ε(redox). The average electron tunneling rate constant through the QD assemblies is estimated on the basis of the Gerischer model for electron transfer.     

Reversible modulation of quantum dot photoluminescence using a protein- bound photochromic fluorescence resonance energy transfer acceptor

Multiple copies ( approximately 20) of Escherichia coli maltose binding protein (MBP) were coordinated to luminescent semiconductor quantum dots (QDs) via a C-terminal oligohistidine segment. The MBP was labeled with a sulfo-N-hydroxysuccinimide-activated photochromic BIPS molecule (1',3-dihydro-1'-(2-carboxyethyl)-3,3-dimethyl-6-nitrospiro[2H-1-benzopyran-2,2'-(2H)-indoline]) at two different dye-to-MBP ratios; D/P = 1 and 5. The ability of MBP-BIPS to modulate QD photoluminescence was tested by switching BIPS from the colorless spiropyran (SP) to the colored merocyanine (MC) using white light (>500 nm) or UV light ( approximately 365 nm), respectively. QDs surrounded by MBP-BIPS with D/P = 1 were quenched on average approximately 25% with consecutive repeated switches, while QDs surrounded by MBP-BIPS with D/P = 5 were quenched approximately 60%. This result suggests a possible use of BIPS-labeled proteins in QD-based nanostructures as part of a threshold switch or other biosensing device.     

Characterization and 2D self-assembly of CdSe quantum dots at the air-water interface

Langmuir film properties, UV-vis spectroscopy, epifluorescence microscopy, and transmission electron microscopy were used to study CdSe quantum dots (QDs) in 2D. By combining these results, it was possible to determine the molar absorptivity, limiting nanoparticle area, luminescence property, and arrangement of the QDs in the monolayer films at the air-water interface. Either trioctylphosphine oxide (TOPO) or 1-octadecanethiol (ODT) stabilized the QDs. The data collected reveal that TOPO forms close-packed monolayers on the surface of the QDs and that ODT-stabilized QDs undergo alkyl chains interdigitation. It was also found that varying the nanoparticle size, nature of surfactant, surface pressure, and mixed monolayers could help engineer the 2D self-assembly of the QDs at the air-water interface. Of practical importance is the transfer of these monolayer films onto hydrophilic or hydrophobic solid substrates, which could be successfully accomplished via the Langmuir-Blodgett film deposition technique.     

Substrate- and time-dependent photoluminescence of quantum dots inside the ultrathin polymer LbL film

The photoluminescence of CdSe/ZnS quantum dots (QDs) in different configurations at solid surfaces (glass, silicon, PDMS, and metals) is considered for three types of organization: QDs directly adsorbed on solid surfaces, separated from the solid surface by a nanoscale polymer film with different thickness, and encapsulated into a polymer film. The complete suppression of photoluminescence for QDs on conductive metal surfaces (copper, gold) indicated a strong quenching effect. The temporal variation of the photoluminescent intensity on other substrates (glass, silicon, and PDMS) can be tuned by placing the nanoscale (3-50 nm) LbL polymer film between QDs and the substrate. The photooxidation and photobleaching processes of QD nanoparticles in the vicinity of the solid surface can be tuned by proper selection of the substrate and the dielectric nanoscale polymer film placed between the substrate and QDs. Moreover, the encapsulation of QD nanoparticles into the polymer film resulted in a dramatic initial increase in the photoemission intensity due to the accelerated photooxidation process. The phenomenon of enhanced photoemission of QDs encapsulated into the ultrathin polymer film provides not only the opportunity for making flexible, ultrathin, QD-containing polymer films, transferable to any microfabricated substrate, but also improved light emitting properties.     

Electron and hole transfer from indium phosphide quantum dots

Electron- and hole-transfer reactions are studied in colloidal InP quantum dots (QDs). Photoluminescence quenching and time-resolved transient absorption (TA) measurements are utilized to examine hole transfer from photoexcited InP QDs to the hole acceptor N,N,N',N'-tetramethyl-p-phenylenediamine (TMPD) and electron transfer to nanocrystalline titanium dioxide (TiO2) films. Core-confined holes are effectively quenched by TMPD, resulting in a new approximately 4-ps component in the TA decay. It is found that electron transfer to TiO2 is primarily mediated through surface-localized states on the InP QDs.     

Cellular uptake and subcellular localization of highly luminescent silica-coated CdSe quantum dots--in vitro and in vivo

With excellent optical properties, quantum dots (QDs) have been made as attractive molecular probes for labeling cells in biological research. The purpose of the present work is to explore the possible role of silica-coated cadmium selenide (CdSe) QDs in the in vitro and in vivo cellular uptake and their subcellular localization. The in vitro uptake characteristics of silica-coated CdSe QDs were performed in cultured New Zealand rabbit adipose tissue-derived mesenchymal stem cells (RADMSCs) and Human cervical cancer cells (HeLa) using fluorescence microscopy after staining with 4,6-diamidino-2-phenylindole (DAPI). The in vitro results showed that the silica-coated CdSe QDs were efficiently taken up by the cells and it was localized in the intracellular vesicles giving strong fluorescence from the cytoplasm and nearby nucleus. Subsequently, the in vivo localization and distribution of QDs were studied by the hematoxilin stained semithin cryosections of tissues (~15 μm thickness) under fluorescence microscopy and ultrathin sections of tissues (~100 nm thickness) under confocal laser scanning microscopy at the distribution maxima. Our in vivo results confirmed the effective cellular uptake and even distribution pattern of QDs in tissues. Overall, these in vitro and in vivo results are represented with focus on internalization, subcellular localization and distribution of the QDs, in view of their potential applications in biomedical field.     

Multidentate surface ligand exchange for the immobilization of CdSe/ZnS quantum dots and surface quantum dot-oligonucleotide conjugates

A method for synthesizing multidentate thiol ligands on fused silica surfaces (e.g., optical fibers) was developed for the immobilization of CdSe/ZnS quantum dots (QDs) capped with hydrophilic or hydrophobic ligands. This work was motivated by the poor stability of QDs immobilized via monodentate thiol ligands and the need for stable immobilization strategies in the development of sensor technologies based on QDs. Multi-dentate immobilization was able to withstand washing protocols, and surface ligand exchange occurred via self-assembly through the zinc-metal affinity interaction. Atomic force and scanning electron microscopy images suggested that the QDs were immobilized at high density, approximately 2-4 x 10 (13) cm (-2). It was possible to immobilize one, two, or three colors of QD. Upon immobilization, 1-2 nm bathochromic shifts in the PL spectra were observed. This was attributed to both ligand exchange and the change in local environment. The change in environment was accompanied by a decrease in PL lifetime. Self-assembly of immobilized QD-oligonucleotide and QD-avidin conjugates was also demonstrated. These conjugates were able to hybridize with complementary oligonucleotide and bind biotin, respectively. This versatile immobilization chemistry is an important step in the development of surface-based QD nanosensors. Such technology requires QDs to be immobilized such that they remain accessible to target molecules in solution.     

Microstructure-controlled aerosol-gel synthesis of ZnO quantum dots dispersed in SiO2 nanospheres

ZnO quantum dots dispersed in a silica matrix were synthesized from a TEOS:Zn(NO(3))(2) solution by a one-step aerosol-gel method. It was demonstrated that the molar concentration ratio of Zn to Si (Zn/Si) in the aqueous solution was an efficient parameter with which to control the size, the degree of agglomeration, and the microstructure of ZnO quantum dots (QDs) in the SiO(2) matrix. When Zn/Si ≤ 0.5, unaggregated quantum dots as small as 2 nm were distributed preferentially inside SiO(2) spheres. When Zn/Si ≥ 1.0, however, ZnO QDs of ～7 nm were agglomerated and reached the SiO(2) surface. When decreasing the ratio of the Zn/Si, a blue shift in the band gap of ZnO was observed from the UV/Visible absorption spectra, representing the quantum size effect. The photoluminescence emission spectra at room temperature denoted two wide peaks of deep-level defect-related emissions at 2.2-2.8 eV. When decreasing Zn/Si, the first peak at ～2.3 eV was blue-shifted in keeping with the decrease in the size of the QDs. Interestingly, the second visible peak at 2.8 eV disappeared in the surface-exposed ZnO QDs when Zn/Si ≥ 1.0.     

Modification of CdTe quantum dots as temperature-insensitive bioprobes

CdTe quantum dots (QDs) were synthesized in aqueous solution with 3-mercaptopropionic acid (MPA) as the stabilizer. The photoluminescence (PL) of CdTe QDs (3.5nm) is found to be temperature-dependent: as the temperature arising from 278K to 323K, the PL intensity declines to 50.2% of its original and PL emission peak shows obvious red-shift ( approximately 7nm). After modification of the QDs surface with denatured ovalbumin, the PL is more temperature-insensitive than before. The PL intensity retains more than 70% of its original and the emission peak shows less red-shift ( approximately 2nm). Moreover, it is found that the PL intensity and wavelength of denatured ovalbumin coated CdTe QDs are reversible during heating (323K)-cooling (278K) cycles. All the studies provide an important theoretical basis for searching temperature-insensitive bioprobes.     

Photodeposition of Ag2S quantum dots and application to photoelectrochemical cells for hydrogen production under simulated sunlight

UV light irradiation of TiO(2) (λ > 320 nm) in a mixed solution of AgNO(3) and S(8) has led to the formation of Ag(2)S quantum dots (QDs) on TiO(2), while Ag nanoparticles (NPs) are photodeposited without S(8). Photoelectrochemical measurements indicated that the Ag(2)S photodeposition proceeds via the preferential reduction of Ag(+) ions to Ag(0), followed by the chemical reaction with S(8). The application of this in situ photodeposition technique to mesoporous (mp) TiO(2) nanocrystalline films coated on fluorine-doped SnO(2) (FTO) electrodes enables formation of Ag(2)S QDs (Ag(2)S/mp-TiO(2)/FTO). Ag(2)S/mp-TiO(2)/FTO has the interband transition absorption in the whole visible region, while in the spectrum of Ag/mp-TiO(2)/FTO, a localized surface plasmon resonance absorption of Ag NPs is present centered at 490 nm. Ag(2)S QD-sensitized photoelectrochemical cells using the Ag(2)S/mp-TiO(2)/FTO and Ag/mp-TiO(2)/FTO photoanodes were fabricated. Under illumination of one sun, the Ag(2)S photoanode cell yielded H(2) at a rate of 0.8 mL·h(-1) with a total conversion efficiency of 0.29%, whereas the Ag/mp-TiO(2)/FTO photoanode is inactive.     

Preparation and characterization of thiacalix[4]arene coated water-soluble CdSe/ZnS quantum dots as a fluorescent probe for Cu2+ ions

Highly fluorescent water-soluble CdSe/ZnS (core/shell) quantum dots (QDs) as a fluorescent Cu2+ ion probe were synthesized using thiacalix[4]arene carboxylic acid (TCC) as a surface coating agent. Hydrophobic trioctylphosphine oxide (TOPO) capped CdSe/ZnS QDs were overcoated with TCC in tetrahydrofuran at room temperature, and deprotonation of the carboxyl groups of TCC resulted in the formation of water-soluble QDs. The surface structure of the QDs was characterized by using transmission electron microscopy (TEM) and fluorescence correlation spectroscopy (FCS). TEM images showed that TCC-coated QDs were monodispersed with the particle size (core-shell moiety) of approximately 5 nm. Hydrodynamic diameter of the TCC-coated QDs was determined to be 8.9 nm by FCS, showing that the thickness of the surface organic layer of the QDs was approximately 2 nm. These results indicate that the surface layer of TCC-coated QDs forms a bilayer structure consisting of TOPO and TCC molecules. TCC-coated CdSe/ZnS QDs were highly fluorescent (quantum yield, 0.21) compared to the QDs surface-modified with mercaptoacetic acid and mercaptoundecanoic acid. Fluorescence of the TCC-coated QDs was effectively quenched by Cu2+ ions even in the presence of other transition metal ions such as Cd2+, Zn2+, Co2+, Fe2+, and Fe3+ ions in the same solution. The Stern-Volmer plot for the fluorescence quenching by Cu2+ ions showed a linear relationship up to 30 microM of Cu2+ ions. The ion selectivity of TCC-coated QDs was determined by measurements of fluorescence responses towards biologically important transition metal ions (50 microM) including Fe2+, Fe3+, Co2+>Zn2+, Cd2+. The fluorescence of TCC-coated QDs was almost insensitive to other biologically important ions such as Na+, K+, Mg2+, and Ca2+, suggesting that TCC-coated QDs can be used as a fluorescent Cu2+ ion probe for biological samples. A possible quenching mechanism by Cu2+ ions was also discussed on the basis of a Langmuir-type adsorption isotherm.     

Aggregated CdS quantum dots: Host of biomolecular ligands

In this contribution, we have studied structural and photophysical properties of aggregated CdS quantum dots (QDs) capped with 2-mercaptoethanol in aqueous medium. The hydrodynamic diameter of the nanostructures in aqueous solution was found to be approximately 160 nm with the dynamic light scattering (DLS) technique, which is in close agreement with atomic force microscopy (AFM) studies (diameter approximately 150 nm). However, the UV-vis absorption spectroscopy, powder X-ray diffraction (XRD), and transmission electron microscopy (TEM) studies confirm the average particle size (QD) in the nanoaggregate to be 4.0 +/- 0.5 nm. The steady-state and time-resolved photoluminescence studies on the QDs further confirm preservation of electronic band structure of the QDs in the nanoaggregate. To study the nature of the nanoaggregate we have used small fluorescent probes, which are widely used as biomolecular ligands (2,6-p-toluidinonaphthalene sulfonate (TNS) and Oxazine 1), and found the pores of the aggregate to be hydrophobic in nature. The significantly large spectral overlap of the host quantum dots (donor) with that of the guest fluorescent probe Oxazine 1 (acceptor) allows us to carry out F?rster resonance energy transfer (FRET) studies to estimate average donor-acceptor distance in the nanostructure, found to be approximately 25 Angstrom. The quantum dot aggregate and the characterization techniques reported here could have implications in the future application of the QD-nanoaggregate as host of small ligand molecules of biological interest.     

Temperature-sensitive photoluminescence of CdSe quantum dot clusters

The formation of narrow size dispersed and nanometer size aggregates (clusters) of cadmium selenide (CdSe) quantum dots (QDs) and their temperature-sensitive photoluminescence (PL) spectral properties close to room temperature (298 K) are discussed. CdSe QDs formed stable clusters with an average diameter of approximately 27 nm in the absence of coordinating solvents. Using transmission electron microscopy (TEM) imaging, we identified the association of individual QDs with 2-5 nm diameters into clusters of uniform size. A suspension of these clusters in different solvents exhibited reversible PL intensity changes and PL spectral shifts which were correlated with temperature. Although the PL intensity of CdSe QDs encapsulated in host matrixes and the solid state showed a response to temperature under cryogenic conditions, the current work identified for the first time QD clusters showing temperature-sensitive PL intensity variations and spectral shifts at moderate temperatures above room temperature. Temperature-sensitive reversible PL changes of clusters are discussed with respect to reversible thermal trapping of electrons at inter-QD interfaces and dipole-dipole interactions in clusters. Reversible luminescence intensity variations and spectral shifts of QD clusters show the potential for developing sensors based on QD nanoscale assemblies.     

Detection of ascorbic acid and folic acid based on water-soluble CuInS(2) quantum dots

In this paper, water-soluble CuInS(2) ternary quantum dots (QDs) modified by mercaptopropionic acid (MPA) were directly synthesized by hydrothermal method. Ascorbic acid (AA) can induce the fluorescence enhancement of MPA-capped CuInS(2) QDs and can be used for the detection of AA. Under the optimized conditions, the relationship between the fluorescence intensity of the CuInS(2) QDs and AA concentration was linear in the range of 0.25-200 μmol?L(-1). Most relevant molecules and physiological ions had no effect on the detection of AA. The fluorescence intensity of CuInS(2) QDs enhanced by a certain amount of AA could be reduced in the presence of folic acid (FA) and thus can be used for the detection of FA with the linear range of 0.2-100 μmol?L(-1). Compared with previous reports, the established approach utilized a simple, sensitive, and selective strategy to develop the QDs probe based on fluorescence enhancing and quenching phenomena without complicated immobilization.     

Three-dimensional porous reduced graphene oxide decorated with MoS2 quantum dots for electrochemical determination of hydrogen peroxide

Three-dimensional (3D) graphene-based nanomaterials have shown wide applications in electrochemical fields such as biosensors. In this study, we displayed a simple fabrication of 3D structural reduced graphene oxide (3D structural RGO) decorated with molybdenum disulfide quantum dots (MoS₂QDs) through a three-step reaction process. With its abundant raw materials, this strategy is economic and non-toxic. Various characterization techniques were utilized to characterize the morphologies of the synthesized MoS₂QDs, graphene oxide (GO), and 3D structural RGO-MoS₂QDs composites. Simultaneously, X-ray photoelectron spectroscopy was applied to characterize the structure and properties of composites. In order to understand the effects of the reaction period on the structure of 3D structural RGO-MoS₂QDs, a series of samples with various reaction periods were prepared for morphological characterization. Finally, the fabricated 3D structural RGO-MoS₂QDs composites were used to modify a glassy carbon electrode as an electrochemical non-enzymatic hydrogen peroxide (H₂O₂) sensor. The obtained results indicate that the fabricated electrochemical H₂O₂ sensor exhibits a wide detection range (0.01–5.57 mM), low detection limit (1.90 μM), good anti-interference performance, and long-time stability (18 days).     

Simple cubic self-assembly of PbS quantum dots by finely controlled ligand removal through gel permeation chromatography

The geometry in self-assembled superlattices of colloidal quantum dots (QDs) strongly affects their optoelectronic properties and is thus of critical importance for applications in optoelectronic devices. Here, we achieve the selective control of the geometry of colloidal quasi-spherical PbS QDs in highly-ordered two and three dimensional superlattices: Disordered, simple cubic (sc), and face-centered cubic (fcc). Gel permeation chromatography (GPC), not based on size-exclusion effects, is developed to quantitatively and continuously control the ligand coverage of PbS QDs. The obtained QDs can retain their high stability and photoluminescence on account of the chemically soft removal of the ligands by GPC. With increasing ligand coverage, the geometry of the self-assembled superlattices by solution-casting of the GPC-processed PbS QDs changed from disordered, sc to fcc because of the finely controlled ligand coverage and anisotropy on QD surfaces. Importantly, the highly-ordered sc supercrystal usually displays unique superfluorescence and is expected to show high charge transporting properties, but it has not yet been achieved for colloidal quasi-spherical QDs. It is firstly accessible by fine-tuning the QD ligand density using the GPC method here. This selective formation of different geometric superlattices based on GPC promises applications of such colloidal quasi-spherical QDs in high-performance optoelectronic devices.

Gel permeation chromatography can finely control ligand coverage of PbS quantum dots. Self-assembly of these QDs with different ligand density leads to the formation of 2D square, hexagonal and 3D simple cubic and face-centered cubic superlattices.     

Temperature effect on the structure and characteristics of ZnS-based quantum dots

The synthesis of zinc sulfide (ZnS) quantum dots (QDs) by microwave heating in a water-ethanol medium is proposed. The effect of the synthesis temperature (80 °C, 100 °C, 120 °C, and 150 °C) on the QD characteristics is examined. Based on the analysis of X-ray diffraction profiles the conclusion is drawn that the hexagonal ZnS phase of wurtzite type with an average nanocrystal size of 2.6-3.7 nm forms in the synthesized QDs. The nanocrystallite size is found to increase with the QD synthesis heating temperature. The analysis of X-ray absorption spectra (XANES) at the zinc K-edge indicates a higher crystallinity of the QD samples prepared at higher synthesis temperatures. The combined analysis of X-ray diffraction profiles, optical diffuse reflectance spectra, and X-ray absorption spectra implies the following possible QD structure: the pure hexagonal ZnS phase of wurtzite type in the bulk of nanoparticles and the amorphous ZnO phase in the surface layer of nanoparticles.     

Optical nonlinear absorption and refraction of CdS and CdS-Ag core-shell quantum dots

The CdS and CdS-Ag core-shell quantum dots (QDs) have been prepared. The nanostructures of the QDs were revealed by transmisson electron microscopy and absorption spectra, respectively. The third-order nonlinear optical properties of the core-shell QDs have been studied by using Z-scan technique with femtosecond pulses at the wavelength of 790 nm. The value of the effective nonlinear absorption coefficient beta(eff) of CdS-Ag QDs is measured to be about 16.8 cm/GW, which is about 400 times larger than that of bare CdS QDs of 3.9 x 10(-2) cm/GW. The nonlinear refraction index gamma of CdS-Ag QDs is about -2.3 x 10(-4) cm(2)GW, which is about 200 times larger than that of bare CdS QDs of 1.0 x 10(-6) cm(2)GW.     

Subsecond luminescence intensity fluctuations of single CdSe quantum dots

Photoluminescence (PL) intermittency characteristics are examined for single quantum dots (QDs) in a CdSe QD sample synthesized at a slow rate at 75 degrees C. Although the PL quantum efficiency was relatively low ( approximately 0.25), we noticed that the PL intensity of single CdSe QDs fluctuated on a subsecond time scale with short-lived "on" and "off" states. The subsecond PL intensity fluctuations of CdSe QDs are different from "on" and "off" PL blinking generally observed for QDs fluctuating on a millisecond to minute time scale. We characterized single QDs by identifying polarized excitations, topographic imaging using atomic force microscopy (AFM), and transmission electron microscopy (TEM). From analysis of the PL intensity trajectories from >100 single CdSe QDs, the average intermittency time was 213 ms. From the PL quantum efficiency, slow growth of QDs, intensity trajectory analyses, and previous reports relating surface trap states and PL properties of QDs, we attribute the subsecond PL intensity fluctuations of single CdSe QDs and short-lived "on" and "off" states to a high-density distribution of homogeneous surface trap states.     

Hydrothermal-assisted grinding route for WS2 quantum dots (QDs) from nanosheets with preferable tribological performance

The 2 D nanomaterials have achieved the superlubrication property whatever in solid or liquid lubrication in recent years.However,whether or not the nanosheets can stably disperse in oils and smoothly enter into the asperity of friction pairs is crucial for exerting the function of antifriction.The structure of 2 D QDs is desirable for addressing these issues due to its smaller 3 D size.In this study,we developed a facile preparation process for WS₂ QDs with uniform 2 nm size from nanosheets via hydrothermal-assisted grinding approach.The structure of the as-obtained WS₂ QDs was determined by a series of characterizations.The results showed that the as-obtained WS₂ QDs exhibited the typical spectrum features of nanosized quantum dot.The results of the tribological performance in grease verified that the average friction coefficient(ACOFs) and wear volume(AWVs) were decreased by 7.89% and 63.90%relative to grease,respectively,exhibiting a preferable friction reducing and wear resistance.