Hydrogen sulfide determination by solid surface luminescence

In the analytical system suggested, atmospheric hydrogen sulfide reacts with the surface of a filter paper treated with aqueous cadmium chloride and yields a luminescent species whose intensity can be correlated with the analyte concentration in ambient air. It was shown that the luminescent species are CdS solid particles which were formed in a well defined size. The paper luminescence was also tried on polymeric surfaces; polyethyleneoxide, polyvinyl alcohol, ethylcellulose and carboxymethylcellulose were found to give a similar luminescence signal. The system can be used on the tip of an optical fiber for an irreversible, cumulative type of analytical device for hydrogen sulfide determination. The 3s detection limit for the paper luminescence detection system was 7.8 ppb H(2)S.     

A turn-on fluorescent probe for selective and sensitive detection of hydrogen sulfide

An imidazolethione based turn-on fluorescent probe was synthesized for the detection of hydrogen sulfide, a biologically relevant molecule and an important air pollutant. The probe rapidly and selectively reacted with hydrogen sulfide to produce a strongly fluorescent product, resulting in the fluorescence enhancement of the system. The detection limit was determined to be 30 nM at the probe concentration of 1.0 μM. An indicating paper for visual detection of hydrogen sulfide gas has been fabricated by immobilizing the probe on a piece of appropriate paper substrate, and the detection limit of the visual method reached as low as 0.7 ppm. Moreover, the fluorescence turn-on/off of the system showed good reversibility when exposed alternately to hydrogen sulfide and mercuric ion, which was utilized to make an INHIBIT logic circuit for the presence of the two species.     

Development of a heterobimetallic Ru(II)-Cu(II) complex for highly selective and sensitive luminescence sensing of sulfide anions

A heterobimetallic ruthenium(II)-copper(II) complex-based luminescent chemosensor, [Ru(bpy)(2)(bpy-DPA)Cu](4+) (bpy: 2,2'-bipyridine; bpy-DAP: 4-methyl-4'-[N,N-bis(2-picolyl)amino-methylene]-2,2'-bipydine), has been designed and synthesized for the highly selective and sensitive recognition and detection of sulfide anions in 100% aqueous solutions. Owing to the high affinity of sulfide to Cu(II), the non-luminescent chemosensor can specifically and rapidly react with sulfide to yield the corresponding ruthenium(II) complex, [Ru(bpy)(2)(bpy-DPA)](2+), accompanied by the remarkable luminescence enhancement. The dose-dependent luminescence enhancement of the sensor shows a good linearity with a detection limit of 20.7 nM for sulfide anions. The novel luminescence sensor has a widely available pH range from 4.5 to 10 and an excellent response selectivity to sulfide only even in the presence of various other anions. Based on this chemosensor, a rapid, selective and sensitive luminescence method for the detection of sulfide anions in wastewater samples was established. The coefficient variations (CVs) of the method are less than 3.1%, and the recoveries are in the range of 90.9-108.5%.     

A time-resolved luminescent competitive assay to detect L-selectin using aptamers as recognition elements

L-selectin is a protein with potential importance for numerous diseases and clinical disorders. In this paper, we present a new aptamer-based luminescent assay developed to detect L-selectin. The sensing system working principle is based on Förster Resonance Energy Transfer (FRET) from a donor terbium complex (TbC) to an acceptor cyanine dye (Cy5). In the present approach, the biotinylated aptamer is combined with Cy5-labelled streptavidin (Cy5-Strep) to yield an aptamer-based acceptor construct (Apta-Cy5-Strep), while L-selectin is conjugated using luminescent TbC. Upon aptamer binding to the TbC-labelled L-selectin (L-selectin-TbC), permanent donor-acceptor proximity is established which allows for radiationless energy transfer to occur. However, when unlabelled L-selectin is added, it competes with the L-selectin-TbC and the FRET signal decreases as the L-selectin concentration increases. FRET from the TbC to Cy5 was observed with time-gated time-resolved luminescence spectroscopy. A significant change in the corrected luminescence signal was observed in the dynamic range of 10–500 ng/mL L-selectin, the concentration range relevant for accelerated cognitive decline of Alzheimer's disease, with a limit of detection (LOD) equal to 10 ng/mL. The aptasensor-based assay is homogeneous and can be realized within one hour. Therefore, this method has the potential to become an alternative to tedious heterogeneous analytical methods, e.g. based on enzyme-linked immunosorbent assay (ELISA).     

Improvements of reliability for methylmercury determination in environmental samples

The determination of methylmercury (MeHg) in environmental samples by ethylation derivation-gas chromatography-atomic fluorescence spectrometry (ED-GC-AFS) is associated with an intimate problem of water moisture accumulation introduced in the ethylation step, which enters the detection system and cause a spectroscopic interference. With a simple modification on the GC-AFS system, this problem was eliminated and the analytical quality of the measurements was significantly improved. The presence of dissolved sulfide in samples can also cause serious chemical interference in the ethylation step resulting in lower or total loss of the MeHg signal. It was found that a masking system of CuSO₄-Na₂C₂O₄ was able to eliminate this interference. With this system, the accurate determination of trace amount of MeHg in high dissolved sulfide containing samples was achieved. Satisfactory analytical results were obtained with the certified reference sediment IAEA405, sulfate reducing bacteria culture and sulfide containing water samples. The limit of detection and quantitation of this masking system is 0.01 and 0.04 ng L⁻¹ respectively. Other factors affecting ethylation are also discussed.     

A Novel QCM-based Biosensor for Detection of Microorganisms Producing Hydrogen Sulfide

Abstract

A novel piezoelectric quartz crystal microbalance (QCM) device with gas permeable membrane is proposed for the detection of microorganisms producing hydrogen sulfide (H₂S). The detection theory is based on the adsorption of hydrogen sulfide onto the silver electrode of the piezoelectric crystal sensor, which causes a dramatic decrease in the resonant frequency of QCM. A 100 Hz frequency shift is chosen as the criteria value to judge the presence of microorganisms producing H₂S. Factors affecting detection were investigated. Desiccant is of great practical importance in sensor response. This new biosensor can be a potential candidate for detecting bacteria which produce hydrogen sulfide.     

High-performance,synergistically catalytic luminescent nanozyme for the degradation and detection of endocrine-disrupting chemical diethylstilbestrol

A synergistically catalytic luminescent nanozyme was designed and synthesized for the degradation and enzymatic fluorescence detection of diethylstilbestrol, an endocrine-disrupting environmental pollutant. Because of the integration of cocatalytic Cu²⁺ ion and CeO₂ particle, luminescent Tb³⁺ ion, and functional ligand dipicolinic acid through flexible metal-organic framework structure, this nanozyme has not only the dual functions of luminescence and multienzyme such as laccase and horseradish peroxidase but also synergistically catalytic effect via a regeneration of Cu²⁺ oxidized by CeO₂. The synergistically catalytic effect of nanozyme greatly enhances the degradation of diethylstilbestrol. The resultants sensitized the luminescence of Tb³⁺ ions, which was used to sense the pM level of diethylstilbestrol in environmental samples. Such a high-performance catalytic luminescent nanozyme can be used to replace natural enzymes for the enzyme-based degradations and ultrasensitive assays. The strategy of constructing artificial enzymes directly from functional units provides a new way for developing fit-for-purpose multifunctional artificial enzymes.     

Chemical and electrochemical processes in low-temperature superionic hydrogen sulfide sensors

Effect the morphology of the surface of the working electrode (PbS) exerts on the sensitivity of a low-temperature potentiometric hydrogen sulfide sensor is studied. The sensor, which is based on electrochemical cell Na _x WO₃/NASICON/PbS, may be used for fast selective detection of hydrogen sulfide in air in natural conditions. It is demonstrated that the sensors with PbS that are deposited out of solution have a faster response than the pressed-to ones. The dependence of EMF on the hydrogen sulfide concentration for the former is linear in semilogarithmic coordinates. Thus difference is explained by the microstructure of the lead sulfide layer. It is shown that the lead sulfide interaction with hydrogen sulfide involves a reversible partial reduction of sulfur and lead at the surface. The species that form in so doing contain sulfur atoms in lower oxidation degrees (poly-and oligo sulfides, sulfite). A mechanism of the sensor operation is proposed on the basis of data yielded by experiment and quantum-chemical simulation. The mechanism includes reversible transport of hydrogen from sulfur atoms to oxygen atoms.     

Determination of Hydrogen Sulfide by Wavelength-modulated Diode Laser Absorption Spectroscopy

Rapid, accurate, and sensitive determination of hydrogen sulfide was provided by tunable distributed feedback diode laser absorption spectroscopy. The laser wavelength scanning range covered the strongest absorption band of hydrogen sulfide. The absorption line at 1578?nm was used for analytical measurements. A homemade digital lock-in amplifier was used to demodulate the first and the second harmonic signals. Normalization of the second harmonic by the first harmonic signal provided calibration-free measurements so that interferences from light path, circuitry, and source intensity were minimized. A mass flow controller was used to introduce 0–100?ppm hydrogen sulfide for validating the analytical performance. The results demonstrated the linearity of the normalized harmonic signals with concentration with a correlation coefficient of 0.9995. The response time was approximately 3?s. The detection limit by Allan variance was 45 ppb with an integration time of 35?s. The sensitive hydrogen sulfide sensor is suitable for environmental monitoring with real-time detection.     

协同发光效应及其分析应用研究

在研究共存元素对钐、铕、铽和镝配合物荧光发射的影响时,人们曾分别观察到这些配合物的荧光强度不但不随某些共存稀土和非稀土离子浓度的增加而降低;而是在一定浓度范围内随共存离子浓度的增加,配合物的荧光发射大大增强,利用这种效应可大大提高这类配合物的荧光分析灵敏度,我们采用自己组装的激光诱导荧光光谱测定装置,选取铕(钐)-     

MnO2‐Modified Persistent Luminescence Nanoparticles for Detection and Imaging of Glutathione in Living Cells and In Vivo

Persistent luminescence nanoparticles (PLNPs) hold great promise for the detection and imaging of biomolecules. Herein, we have demonstrated a novel nanoprobe, based on the manganese dioxide (MnO₂)‐modified PLNPs, that can detect and image glutathione in living cells and in vivo. The persistent luminescence of the PLNPs can be efficiently quenched by the MnO₂ nanosheets. In the presence of glutathione (GSH), MnO₂ was reduced to Mn²⁺ and the luminescence of PLNPs can be restored. The persistent luminescence property can allow detection and imaging without external excitation and avoid the background noise originating from the in situ excitation. This strategy can offer a promising platform for detection and imaging of reactive species in living cells or in vivo.     

Luminescent determination of lanthanides using phosphor crystals

Summary Data on luminescent methods for the determination of lanthanides (Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb) in various objects using phosphor crystals have been systematized. It has been shown that the choice of the base and type of luminescence excitation are of special importance for working out analytical techniques. The processes of interionic interaction resulting in quenching or sensitization of luminescence are described. Some examples (ScBO₃ · Ce · Tb, GdOF · Tb (Ho, Er), Cs₂NaTbCl₆ · Eu) were considered to show the possibilities of luminescence sensitization allowing to lower the detection limit by 1.5–2 orders of magnitude. Summarizing tables of the proposed methods are given as well as some specific recommendations on the determination of the individual lanthanides.

---

Luminescenzbestimmung von Lanthaniden mit Hilfe von Leuchtphosphorkristallen

     

Determination of Phenolic Acids in Danshen Preparations by LC with Chemiluminescence Detection

A simple and sensitive method has been developed for the simultaneous determination of eight phenolic acids in Danshen preparations based on liquid chromatography with chemiluminescence detection. Chemiluminescence parameters including flow rate, buffer pH, the concentration of luminescent and reactive solutions, were optimized. The analytical performance of the optimized luminol-H₂O₂ detection was compared with those of luminol-pyrogallol and UV detection. Under the optimized conditions, the method was validated with respect to linearity, precision, limits of detection and quantification. The method offers an attractive alternative to be used to evaluate the quality of Danshen preparations.     

Low-temperature catalytic decomposition of hydrogen sulfide into hydrogen and diatomic gaseous sulfur

The thermodynamics of three pathways of the hydrogen sulfide decomposition reaction is considered. In the thermal process, the gas-phase dissociation of hydrogen sulfide yields hydrogen and diatomic singlet sulfur. Over sulfide catalysts, the reaction proceeds via the formation of disulfane (H₂S₂) as the key surface intermediate. This intermediate then decomposes to release hydrogen into the gas phase, and adsorbed singlet sulfur recombines into cyclooctasulfur. Over metal catalysts, H₂S decomposes via dissociation into surface atoms followed by the formation of gaseous hydrogen and gaseous triplet disulfur. The last two pathways are thermodynamically forbidden in the gas phase and can take place at room temperature only on the surface of a catalyst. An alternative mechanism is suggested for hydrogen sulfide assimilation in the chemosynthesis process involving sulfur bacteria. To shift the hydrogen sulfide decomposition equilibrium toward the target product (hydrogen), it is suggested that the reaction should be conducted at room temperature as a three-phase process over a solid catalyst under a layer of a solvent that can dissolve hydrogen sulfide and sulfur. In this case, it is possible to attain an H₂S conversion close to 100%. Therefore, hydrogen sulfide can be considered as an inexhaustible source of hydrogen, a valuable chemical and an environmentally friendly energetic product.     

A novel detection of hydrogen peroxide based on a luminescent polyoxometalate

In this paper, we attempt to construct a simple and sensitive detection method for hydrogen peroxide based on reversible colour change and luminescence switching modulated by the electrochemical stimulation and redox reaction of H(2)O(2) with electroreduced polyoxometalate. This method successfully combines the electrochromic and luminescent properties of the polyoxometalate to develop a novel detection method for H(2)O(2) with good reversibility, which displays high sensitivity, a wide linear range and a low detection limit to H(2)O(2).     

A Multi‐responsive Regenerable Europium–Organic Framework Luminescent Sensor for Fe3+, CrVI Anions,and Picric Acid

A novel luminescent microporous lanthanide metal–organic framework (Ln‐MOF) based on a urea‐containing ligand has been successfully assembled. Structural analysis revealed that the framework features two types of 1D channels, with urea N?H bonds projecting into the pores. Luminescence studies have revealed that the Ln‐MOF exhibits high sensitivity, good selectivity, and a fast luminescence quenching response towards Fe³⁺, Cr^VI anions, and picric acid. In particular, in the detection of Cr₂O₇^2? and picric acid, the Ln‐MOF can be simply and quickly regenerated, thus exhibiting excellent recyclability. To the best of our knowledge, this is the first example of a multi‐responsive luminescent Ln‐MOF sensor for Fe³⁺, Cr^VI anions, and picric acid based on a urea derivative. This Ln‐MOF may potentially be used as a multi‐responsive regenerable luminescent sensor for the quantitative detection of toxic and harmful substances.     

A paper‐based gas sensor for simultaneous noninstrumental colorimetric detection of nitrite and sulfide in waters

The use of paper‐based devices in combination with noninstrumental detection systems is becoming increasingly important in the analytical field due to its simplicity, rapidity, and low cost. However, their use for determination of volatile analyte derivatives is still relatively scarce. The present work reports on the assessment of a paper‐based gas‐sensing approach for the simultaneous noninstrumental colorimetric detection of nitrite and sulfide. Colorimetric systems based on the Griess and methylene blue assays, formation of colored metallic sulfides, and interaction/reaction with in situ generated metallic nanoparticles were preliminary evaluated. Then, the effect of experimental variables affecting the analytical performance of the paper‐based gas sensor was studied with two digitization systems, namely a scanner and a smartphone. Under optimal conditions, the developed system yielded limits of detection of 0.055 and 0.005 mg/L for nitrite and sulfide, respectively. The repeatability, expressed as relative standard deviation, was found to be 5.9 and 6.7% for nitrite and sulfide, respectively. The proposed method was finally applied to the analysis of water samples, showing recoveries in the range of 95–105%.     

A Water‐Stable Uranyl Organic Framework as a Highly Selective and Sensitive Bifunctional Luminescent Probe for Fe3+ and Tetracycline Hydrochloride

A new coordination polymer (H₂bpy)_0.5?[(UO₂)_1.5(ipa)₂(H₂O)] ( 1 ) (H₂ipa=isophthalic acid, bpy=4,4′‐bipyridine) was synthesized by hydrothermal condition. It was characterized by IR spectroscopy, elemental analysis, TG‐DTA analysis, and powder X‐ray diffraction. Analysis of single‐crystal X‐ray diffraction results showed that the title compound exhibited a double chain bridged by the different uranyl ions and ipa^2? ligands. Through the hydrogen bond interactions and π???π stacking interactions, the double chains were assembled into the three‐dimensional supramolecular framework. Furthermore, the compound can be used as a promising bifunctional luminescence sensor for detecting and identifying Fe³⁺ and tetracycline hydrochloride antibiotic molecules with high selectivity and sensitivity in aqueous solutions. Moreover, the luminescent sensing mechanisms for different analytes were proposed. Moreover, the electronic properties of title compound were explored by density functional theory (DFT) calculations. The sensor system has been successfully applied for the detection of Fe³⁺ and tetracycline hydrochloride with high recovery percentages and low relative standard deviation in real river water samples.     

Photolysis of H_2S with interior microwave discharge electrodeless lamps

<正>The luminescent properties of microwave discharge electrodeless mercury lamp(MDEL-Hg) which was ignited within the resonant cavity and photolysis of hydrogen sulfide with low concentration were studied in this paper.Experiment results indicated that the Interior MDEL-Hg could be made the best of energy utihzation and the efficiency of photolysis of H_2S was very significant under the experimental conditions with the initial H_2S concentration of 7.9 mg m~(-1).With residence time of 1.5 s,the removal efficiency of hydrogen sulfide was 91%,the absolute removal amount(ARA) was 3.24μg s~(-1) and the energy consumption was 58.23 mg(kWh)~(-1).     

Carbonyl Sulfide (COS) Donor Induced Protein Persulfidation Protects against Oxidative Stress

The emergence of hydrogen sulfide (H₂S) as an important signalling molecule in redox biology with therapeutic potential has triggered interest in generating this molecule within cells. One strategy that has been proposed is to use carbonyl sulfide (COS) as a surrogate for hydrogen sulfide. Small molecules that generate COS have been shown to produce hydrogen sulfide in the presence of carbonic anhydrase, a widely prevalent enzyme. However, other studies have indicated that COS may have biological effects which are distinct from H₂S. Thus, it would be useful to develop tools to compare (and contrast) effects of COS and H₂S. Here we report enzyme‐activated COS donors that are capable of inducing protein persulfidation, which is symptomatic of generation of hydrogen sulfide. The COS donors are also capable of mitigating stress induced by elevated reactive oxygen species. Together, our data suggests that the effects of COS parallel that of hydrogen sulfide, laying the foundation for further development of these donors as possible therapeutic agents.