Y2O3:Eu (5 mol%) with Ag nanoparticles prepared by citrate precursor

Y₂O₃:Eu³⁺ (5 mol% Eu³⁺) and Y₂O₃:Eu³⁺ (5 mol% Eu³⁺) containing 1 mol% of Ag nanoparticles were prepared by heat treatment of a viscous resin obtained via citrate precursor. TEM and EDS analyses showed that Y₂O₃:Eu³⁺ (5 mol% Eu³⁺) is formed by nanoparticles with an average size of 12 nm, which increases to 30 nm when Ag is present because the effect of metal induced crystallization occurs. Ag nanoparticles with a size of 9 nm dispersed in Y₂O₃:Eu³⁺ (5 mol% Eu³⁺) were obtained and the surface plasmon effect on Ag nanoparticles was observed. The emission around 612 nm assigned to the Eu³⁺ (⁵D₀→⁷F₂) transition enhanced when the Ag nanoparticles were present in the Y₂O₃:Eu³⁺ luminescent material.     

Thermoluminescence studies of UV-irradiated Y2O3:Eu3+ doped phosphor

The present paper reports thermoluminescence (TL) glow curves of Eu³⁺-doped Y₂O₃ phosphor with different ultraviolet (UV) exposure times. The glow peak shows second-order kinetics of Eu³⁺-doped Y₂O₃, and corresponding kinetic parameters were evaluated using the peak shape method. Calculations of trap depth were carried out using different methods. The kinetics order, activation energy, and frequency factor were calculated. The recorded glow curve shifts towards higher intensity with longer UV exposure. The heating rate used for recording TL was 3.0 °C s^?1. Particle size and structure were verified by X-ray diffraction (XRD) pattern and morphology by scanning electron microscopy (SEM) imaging.     

Synthesis and characterization of novel blue emitting Na2CaSiO4:Ce3+ phosphor

The blue phosphors Na_(2?x)Ca_(1?x)SiO₄:xCe³⁺ were synthesized by the sol–gel method and their luminescence characteristics were investigated for the first time. Structural information about prepared samples is obtained by analyzing the XRD patterns and SEM micrographs. The photoluminescence (PL) excitation spectra indicate that the Na_(2?x)Ca_(1?x)SiO₄:xCe³⁺ phosphors can be effectively excited by ultraviolet (360 nm) light. The PL emission spectra exhibit tunable blue broadband emission with the dominant wavelength of 427–447 nm under excitation of 360 nm by controlling the doping concentration of Ce³⁺. The concentration quenching effect for Ce³⁺ was found at the optimum doping concentration of 4 mol%. The Commission Internationale de l’Eclairage 1931 chromaticity coordinates of Na_1.96Ca_0.96SiO₄:0.04Ce³⁺ are (0.1447, 0.0787), which are better color purity compared to the commercial Eu²⁺-doped BaMgAl₁₀O₁₇ phosphor. Na_1.96Ca_0.96SiO₄:0.04Ce³⁺ composition shows intense blue emission (peak wavelength, 439 nm) with relative intensity versus commercial BaMgAl₁₀O₁₇:Eu²⁺ blue phosphor (Nichia) 65 and 158 % under 254 and 365 nm excitation, respectively. All the results indicate that Na_(2?x)Ca_(1?x)SiO₄:xCe³⁺ phosphors are potential candidate as a blue emitting phosphor for UV-converting white light-emitting diodes.     

Synthesis and optical properties of novel red phosphors YNbTiO6:Eu3+ with highly enhanced brightness by Li+ doping

Highly luminescent euxenite phased YNbTiO₆:Eu³⁺ and Li⁺-doped YNbTiO₆:Eu³⁺ red phosphors have been prepared through a facile sol–gel combustion process and investigated for the first time. The introduction of Li⁺ ions into YNbTiO₆:Eu³⁺ is able to result in significant changes of the crystallinity and particle size, and bring a clear red-shift of absorption edge. A dominant red emission peak at 611 nm due to the ⁵D₀ → ⁷F₂ transition of Eu³⁺ was observed from photoluminescence spectra of the YNbTiO₆:Eu³⁺ and Li⁺-doped YNbTiO₆:Eu³⁺ phosphors. In particular, the emission intensity of the optimal Li⁺-doped YNbTiO₆:Eu³⁺ was examined to be close to 400% of commercial Y₂O₃:Eu³⁺ phosphor. The mechanism of the enhanced emission by Li⁺ doping was discussed.     

Synthesis and photoluminescence of the Y2O3:Eu3+ phosphor nanowires in AAO template

The monodisperse array and nanowires of Y₂O₃:Eu³⁺ phosphor were synthesized using anodic aluminum oxide (AAO) template by sol–gel method. Scanning electron microscope (SEM) images indicated that Y₂O₃:Eu³⁺ nanowires are parallelly arranged, all of which are in uniform diameter of about 50 nm. The high-magnification SEM image showed that each nanowire is composed of a lot of agglutinating particles. The patterns of selected-area electron diffraction confirmed that Y₂O₃:Eu³⁺ nanowires mainly consist of polycrystalline materials. Excitation and emission spectra of Y₂O₃:Eu³⁺/AAO composite films were measured. The characteristic red emission peak of Eu³⁺ ion attributed to ⁵D₀→⁷F₂ transition in Y₂O₃:Eu³⁺/AAO nanowires broadened its halfwidth.     

Investigation of thermal decomposition of yttrium–aluminum-based precursors for YAG phosphors

Three types of precursors were prepared using the wet-chemical synthesis route, starting from yttrium?Ceuropium?Caluminum nitrate solution and different precipitating agents (urea, oxalic acid, and ammonium carbonate). The precursors were fired at 1200?°C in nitrogen atmosphere in order to obtain europium-doped yttrium aluminate Y₃Al₅O₁₂:Eu³⁺ phosphor with garnet structure (YAG:Eu). The processes involved in the thermal decomposition of precursors and their composition were put in evidence using thermal analysis (TG?CDTA) and FT-IR spectroscopy. The GA?CDTA curves possess typical features for basic-oxalate, -nitrate, and -carbonates as formed with oxalic acid, urea, and ammonium carbonate, respectively. Correlation between the thermal decomposition steps, mass loss, and composition of gases evolved during the thermal treatment was established using TG?CDTA?CFT-IR coupling. It was found that the different composition of precursors reflects on the luminescent characteristics of the corresponding phosphors. Urea and ammonium carbonate lead to the formation of YAG type phosphors, with garnet structure and specific red emission. As for the oxalic acid, this precipitating agent generates a non-homogeneous powder that contains yttrium oxide as impurity phase. This phosphor is a mixture of Y₂O₃:Eu³⁺, Y₄Al₂O₉:Eu³⁺, and Y₃Al₅O₁₂:Eu³⁺ that explain the relative higher emission intensity.     

Vacuum Ultraviolet Excited Photoluminescence Properties of Y2O2S：Eu^3＋,Bi^3＋ Phosphor

As an Hg-free lamp using phosphor, the Bi^3＋ and EH^3＋ co-doped Y2O2S phosphors were prepared and their luminescence properties under vacuum ultraviolet（VUV） excitation were investigated. The VUV photoluminescent intensity of Y2O2S：Eu^3＋ was weak, however, considerably stronger red emission at 626 nm with good color purity was observed in Y2O2S：Eu^3＋,Bi^3＋ systems. Investigation on the photoluminescence reveals that the strong VUV luminescence of Y2O2S：Eu^3＋,Bi^3＋ at 147 nm is mainly because the Bi^3＋ acts as a medium and effectively performs the energy transfer process： Y^3＋-O^2-→Bi^3＋→Eu^3＋, while the intense emission band at 172 nm is attributed to the absorption of the characteristic ^1So-^1P1 transition of Bi^3＋ and the direct energy transfer from Bi^3＋ to Eu^3＋. The Y2O2S：Eu^3＋,Bi^3＋ shows excellent VUV optical properties compared with the commercial （Y,Gd）BO3：Eu^3＋. Thus, the Y2O2S：Eu^3＋,Bi^3＋ can be a potential red VUV-excited candidate applied in Hg-free lamps for backlight of liquid crystal display.     

A novel blue-emitting phosphor LiSrPO4:Eu for white LEDs

A novel blue-emitting phosphor, LiSrPO₄:Eu²⁺, was prepared by the solid-state reaction and X-ray powder diffraction (XRD) analysis confirmed the formation of LiSrPO₄:Eu²⁺. Photoluminescence (PL) results showed that the phosphor can be efficiently excited by UV-visible light from 250 to 440 nm, and exhibited bright blue emission. The effects of the doped-Eu²⁺ concentration in LiSrPO₄:Eu²⁺ on the PL were investigated in detail. The results showed that the relative PL intensity increases with Eu²⁺-concentration increasing until a maximum intensity is reached, and then it decreases due to concentration quenching and a red-shift appears, which are explained satisfactorily with the luminescent theory. Upon excited with 396 nm light, the present synthesized phosphor has higher emission intensity than that from the commercial blue phosphor, BaMgAl₁₀O₁₇:Eu²⁺. Bright blue light-emitting diodes were fabricated by the combination of the synthesized LiSrPO₄:Eu²⁺ with ∼397 nm emitting InGaN-based chips.     

Synthesis of garnet structured Li7+x La3Y x Zr2-x O12 (x = 0–0.4) by modified sol–gel method

Preparation of lithium garnet Li₇La₃Zr₂O₁₂ (LLZ) in cubic phase by solid state method requires high temperature sintering around 1,200 °C for 36 h in Al₂O₃ crucible with intermittent grinding. Synthesis of LLZ in cubic phase at lower temperatures by wet chemical methods was reported earlier, however that decompose at high temperature around 850 °C. In this work we report the systematic studies on synthesis of garnet structured electrolytes by modified sol–gel method by the simultaneous substitution of Li⁺ and Y³⁺ for Zr⁴⁺ according to the formulae Li_7+x La₃Y _x Zr_2-x O₁₂ (x = 0, 0.1, 0.2, 0.3 and 0.4). The present investigation revealed that the cubic garnet phase is obtained at much lower temperature for Li₇La₃Zr₂O₁₂ and the simultaneous increase of both Li⁺ and Y³⁺ in Li_7+x La₃Y _x Zr_2-x O₁₂ requires slightly higher sintering temperatures for the formation of cubic garnet phase. SEM micrographs of the Li_7+x La₃Y _x Zr_2-x O₁₂ (x = 0, 0.1, 0.2, 0.3 and 0.4) annealed at minimum sintering temperature required for the formation of cubic garnet phase revealed the increase in grain size and relatively dense structure with increase of x in Li_7+x La₃Y _x Zr_2-x O₁₂.     

Effect of Sr2+ doping on the luminescence properties of YVO4:Eu3+,Sr2+ particles prepared by a solvothermal method

Well-dispersed Eu³⁺ and Sr²⁺ co-doped YVO₄ luminescent particles (YVO₄:Eu³⁺,Sr²⁺) on the submicron scale were prepared by a facile solvothermal method at low temperature. The effect of Sr²⁺ doping on the luminescence of YVO₄:Eu³⁺,Sr²⁺ particles was investigated by fixing the Eu³⁺ doping concentration at 7 mol%. It was found that the luminescence intensity of the as-prepared YVO₄:Eu³⁺,Sr²⁺ particles increased with the Sr²⁺ doping concentration x to reach a two-fold enhancement when x = 5 %, and then decreased for higher x. We also investigated the effect of thermal annealing on the luminescence properties of the YVO₄:Eu³⁺ and YVO₄:Eu³⁺,Sr²⁺ particles. A remarkable enhancement in their luminescence properties was observed after annealing at 900 °C in air for 30 min. It was showed that the annealed YVO₄:Eu³⁺,Sr²⁺ particles exhibited a two-fold stronger emission than the annealed YVO₄:Eu³⁺. This work indicates that Sr²⁺ doping is beneficial to the luminescence enhancement for both the as-prepared and annealed YVO₄:Eu³⁺,Sr²⁺ particles.     

Modified low temperature solid state synthesis and photoluminescent properties of Y0.48Li1.5V1 ? x P x O4:Eu3+ (x = 0.2, 0.4, 0.6) nanophosphors

A modified low temperature solid state process has been proposed to systematically synthesize europium-doped yttrium phosphate-vanadates with general formula Y_0.48Li_1.5V_{1 ? x} P _x O₄:Eu³⁺ (x = 0.2, 0.4, 0.6). All the Y_0.48Li_1.5V_{1 ? x} P _x O₄:Eu³⁺ products were characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM). The excitation and emission spectra were measured at room temperature. Y_0.48Li_1.5V_{1 ? x} P _x O₄:Eu³⁺ show the characteristic missions of Eu³⁺ (⁵ D ₀?⁷ F _{1, 2, 3, 4} transitions dominated by ⁵ D ₀?⁷ F ₂), intensities of the products were sensitive to the x value, and the x value had an obvious influence on the (⁵ D ₀?⁷ F ₂)/(⁵ D)₀?⁷ F ₁) intensity ratio of Eu³⁺. In addition, incorporation of Li⁺ ions in the phosphors reduce the amount of Y₂O₃, lower the cost of production, and cause a new phase Li₃VO₄.     

Synthesis,characterization, and photoluminescence of SrBPO5:R,Na+ (R = Eu3+, Tb3+) phosphor for solid state lighting

A series of phosphors SrBPO₅:R,Na⁺ (R = Eu³⁺, Tb³⁺) were prepared by high-temperature solid-state synthesis, and their phase purity, morphology, IR spectra, and UV-Vis photoluminescence properties were investigated. The f-f transitions of Eu³⁺ and Tb³⁺ ions in the host lattice were assigned and discussed. The excitation and emission spectra indicate that SrBPO₅:Eu³⁺,Na⁺ and SrBPO₅:Tb³⁺,Na⁺ can be effectively excited by ultraviolet (394 and 370 nm), and exhibit reddish orange emission and yellowish green emission, respectively. The influence of the doping concentration on the relative emission intensity of Eu³⁺/Tb³⁺ was investigated, and the critical distance R_c was estimated in term of the concentration quenching data. The present study suggests SrBPO₅:R,Na⁺ (R = Eu³⁺, Tb³⁺) phosphor can be a potential candidate as an UV-convertible phosphor for white light-emitting diodes (LEDs).     

Uniform Ln (Eu, Tb) doped NaLa(WO4)2 nanocrystals: Synthesis, characterization, and optical properties

Uniform shuttle-like Ln³⁺ (Eu³⁺, Tb³⁺) doped NaLa(WO₄)₂ nanocrystals have been solvothermally synthesized, and the size of the nanocrystals could be easily controlled by adjusting the volume ratio of ethylene glycol (EG) to water. Doped with 5 mol% Eu³⁺ and Tb³⁺ ions, the NaLa(WO₄)₂ nanocrystals showed strong red and green emissions with lifetimes of 0.8 and 1.40 ms, respectively. A high quenching concentration of 15 mol% was observed in Eu³⁺-doped NaLa(WO₄)₂ nanocrystals and 35 mol% in Tb³⁺-doped NaLa(WO₄)₂ nanocrystals. The emission intensity measurements of Eu³⁺-doped NaLa(WO₄)₂ with different sizes indicated that the emission intensity of shuttles with length of 300 nm in average was stronger than that of shuttles with length of 900 nm in average, but was weaker than that of needles with length of 4 and 9 μm in average.     

Enhancement of the photoluminescence and long afterglow properties of Ca<Subscript>2</Subscript>MgSi<Subscript>2</Subscript>O<Subscript>7</Subscript>:Eu<Superscript>2+</Superscript> phosphor by Dy<Superscript>3+</Superscript> co-doping

The Ca₂MgSi₂O₇:Eu²⁺ and Ca₂MgSi₂O₇:Eu²⁺, Dy³⁺ long afterglow phosphors were synthesized under a weak reducing atmosphere by the traditional high temperature solid state reaction method. The synthesized phosphors were characterized by powder X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDX) techniques. The luminescence properties were investigated using thermoluminescence (TL), photoluminescence (PL), long afterglow, mechanoluminescence (ML), and ML spectra techniques. The crystal structure of sintered phosphors was an akermanite type structure, which belongs to the tetragonal crystallography. TL properties of these phosphors were investigated, and the results were also compared. Under the ultraviolet excitation, the emission spectra of both prepared phosphors were composed of a broad band peaking at 535 nm, belonging to the broad emission band. When the Ca₂MgSi₂O₇:Eu²⁺ phosphor is co-doped with Dy³⁺, the PL, afterglow and ML intensity is strongly enhanced. The decay graph indicates that both the sintered phosphors contain fast decay and slow decay process. The ML intensities of Ca₂MgSi₂O₇:Eu²⁺ and Ca₂MgSi₂O₇:Eu²⁺, Dy³⁺ phosphors were proportionally increased with the increase of impact velocity, which suggests that this phosphor can be used as sensors to detect the stress of an object.     

Determining the structure of tetragonal Y2WO6 and the site occupation of Eu dopant

The compound Y₂WO₆ is prepared by solid state reaction at 750 °C using sodium chloride as mineralizer. Its structure is solved by ab-initio methods from X-ray powder diffraction data. This low temperature phase of yttrium tungstate crystallizes in tetragonal space group P4/nmm (No. 129), Z=2, a=5.2596(2) Å, c=8.4158(4) Å. The tungsten atoms in the structure adopt an unusual [WO₆] distorted cubes coordination, connecting [YO₆] distorted cubes with oxygen vacancies at the O₂ layers while other yttrium ions Y₂ form [YO₈] cube coordination. Y³⁺ ions occupy two crystallographic sites of 2c (C_4v symmetry) and 2a (D_2d symmetry) in the Y₂WO₆ host lattice. With Eu³⁺ ions doped, the high resolution emission spectrum of Y₂WO₆:Eu³⁺ suggests that Eu³⁺ partly substituted for Y³⁺ in these two sites. The result of the Rietveld structure refinement shows that the Eu³⁺ dopants preferentially enter the 2a site. The uniform cube coordination environment of Eu³⁺ ions with the identical eight Eu-O bond lengths is proposed to be responsible for the intense excitation of long wavelength ultraviolet at 466-535 nm.     

Luminescent properties of Sr<Subscript>3</Subscript>Al<Subscript>2</Subscript>O<Subscript>6</Subscript>: Eu,Pr prepared by sol–gel method

A new red-emitting long afterglow Sr₃Al₂O₆: Eu²⁺, Pr³⁺ phosphor was synthesized by sol–gel methods using Sr(NO₃)₂, Al(NO₃)₃·9H₂O, Eu(NO₃)₃ and Pr(NO₃)₃ as raw materials. The crystalline structure of the phosphor powders were characterized by X-ray diffraction. Luminescent properties of the phosphor powders were analyzed by the fluorescence spectrophotometer. Sr₃Al₂O₆: Eu²⁺, Pr³⁺ phosphor powders with single Sr₃Al₂O₆ phase were prepared at 1200 °C for 2 h in the reducing atmosphere. Pr³⁺ doped made the light intensity and the light-lasting time of Sr₃Al₂O₆: Eu²⁺, Pr³⁺ phosphors improved. The emission peaks of the Sr₃Al₂O₆: Eu²⁺, Pr³⁺ phosphor powders lay at 612 nm with the excitation of 472 nm and the longest afterglow time could last for about 15 min at Pr³⁺ content of 0.06.     

Improved water resistance of SrAl2O4: Eu2+, Dy3+ phosphor directly achieved in a water-containing medium

In this paper, a heterogeneous precipitation method utilizing urea hydrolysis was adopted to coat a SiO₂ layer on the surface of SrAl₂O₄:Eu²⁺, Dy³⁺ long persistence phosphors. To avoid phosphor hydrolysis in a water-containing coating medium, the hydrolysis and polymerization reactions of tetraethyl orthosilicate (TEOS) were concerned and carried out. The crystal phases, surface morphologies, hydrolysis stability and water resistance on afterglow properties of coated phosphors were investigated. Scanning electron microscopy, energy dispersive spectrum analysis, transmission electron microscope and Fourier transform infrared spectrum results confirmed that a continuous, uniform and compact SiO₂ coating layer was successfully obtained on the phosphors surface. A theoretical coating amount of 5% or higher was found to be good for hydrolysis stability. Photoluminescence results revealed the coated phosphors showed much better water resistance on afterglow properties than the uncoated phosphor. We also discussed and proposed the hydrolysis restriction mechanism of SrAl₂O₄:Eu²⁺, Dy³⁺ in the water-containing coating medium.     

Fabrication,patterning and luminescence properties of X2–Y2SiO5:A (A=Eu3+, Tb3+, Ce3+) phosphor films via sol–gel soft lithography

X₂–Y₂SiO₅:A (A=Eu³⁺, Tb³⁺, Ce³⁺) phosphor films and their patterning were fabricated by a sol–gel process combined with a soft lithography. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), atomic force microscopy (AFM), scanning electron microscopy (SEM) optical microscopy and photoluminescence (PL) were used to characterize the resulting films. The results of XRD indicated that the films began to crystallize at 900 °C with X₁–Y₂SiO₅, which transformed completely to X₂–Y₂SiO₅ at 1250 °C. Patterned thin films with different band widths (5 μm spaced by 5 μm and 16 μm spaced by 24 μm) were obtained by a soft lithography technique (micromoulding in capillaries, MIMIC). The SEM and AFM study revealed that the nonpatterned phosphor films were uniform and crack free, and the films mainly consisted of closely packed grains with an average size of 350 nm. The doped rare earth ions (A) showed their characteristic emissions in X₂–Y₂SiO₅ phosphor films, i.e., ⁵D₀–⁷F_J (J=0,1,2,3,4) for Eu³⁺, ⁵D_{3, 4}–⁷F_J (J=6,5,4,3) for Tb³⁺ and 5d (²D)–4f (²F_{2/5, 2/7}) for Ce³⁺, respectively. The optimum doping concentrations for Eu³⁺, Tb³⁺ were determined to be 13 and 8 mol% of Y³⁺ in X₂–Y₂SiO₅ films, respectively.     

Luminescence Properties of Ca2Ga2SiO7:RE Phosphors for UV White‐Light‐Emitting Diodes

A series of Eu²⁺‐, Ce³⁺‐, and Tb³⁺‐doped Ca₂Ga₂SiO₇ phosphors is synthesized by using a high‐temperature solid‐state reaction. The powder X‐ray diffraction and structure refinement data indicate that our prepared phosphors are single phased and the phosphor crystalizes in a tetrahedral system with the ${P\bar 42m}$ (113) space group. The Eu²⁺‐ and Ce³⁺‐doped phosphors both have broad excitation bands, which match well with the UV light‐emitting diodes chips. Under irradiation of λ=350 nm, Ca₂Ga₂SiO₇:Eu²⁺ and Ca₂Ga₂SiO₇:Ce³⁺, Li⁺ have green and blue emissions, respectively. Luminescence of Ca₂Ga₂SiO₇:Tb³⁺, Li⁺ phosphor varies with the different Tb³⁺ contents. The thermal stability and energy‐migration mechanism of Ca₂Ga₂SiO₇:Eu²⁺ are also studied. The investigation results indicate that the prepared Ca₂Ga₂SiO₇:Eu²⁺ and Ca₂Ga₂SiO₇:Ce³⁺, Li⁺ samples show potential as green and blue phosphors, respectively, for UV‐excited white‐light‐emitting diodes.     

CaWO4:xEu3+,ySm3+,zLi+红色荧光粉的制备及光学性能

采用微波固相法制备了CaWO₄：xEu³⁺,ySm³⁺,zLi⁺红色荧光粉。测量样品的XRD图、激发谱、发射谱及发光衰减曲线,研究并分析了Eu³⁺、Sm³⁺、Li⁺的掺杂浓度,对样品微结构、光致发光特性、能量传递及能级寿命的影响。结果表明,Eu³⁺、Sm³⁺、Li⁺掺杂并未引起合成粉体改变晶相,仍为CaWO₄单一四方晶系结构。Eu³⁺、Sm³⁺共掺样品中,Sm³⁺掺杂为3%时,Sm³⁺对Eu³⁺的能量传递最有效。Li⁺掺杂起到了助熔剂和敏化剂的作用,使样品发光更强。在394 nm激发下,与CaWO₄：3%Eu³⁺样品比较,3%Eu³⁺、3%Sm³⁺共掺CaWO₄及3%Eu³⁺、3%Sm³⁺、1%Li⁺共掺CaWO₄样品的发光分别增强2倍及2.4倍。同一激发波长下,单掺Eu³⁺样品寿命最短,Sm³⁺、Eu³⁺共掺样品随Sm³⁺浓度增加,寿命先减小后增加,且掺杂了Li⁺的样品比不掺Li⁺的样品⁵D₀能级寿命有所增加。