Effect of the anchoring group in Ru-bipyridyl sensitizers on the photoelectrochemical behavior of dye-sensitized TiO2 electrodes: carboxylate versus phosphonate linkages

The effects of the number of anchoring groups (carboxylate vs phosphonate) in Ru-bipyridyl complexes on their binding to TiO(2) surface and the photoelectrochemical performance of the sensitized TiO(2) electrodes were systematically investigated. Six derivatives of Ru-bipyridyl complexes having di-, tetra-, or hexacarboxylate (C2, C4, and C6) and di-, tetra-, or hexaphosphonate (P2, P4, and P6) as the anchoring group were synthesized. The properties and efficiencies of C- and P-complexes as a sensitizer depended on the number of anchoring groups in very different ways. Although C4 exhibited the lowest visible light absorption, C4-TiO(2) electrode showed the best cell performance and stability among C-TiO(2) electrodes. However, P6, which has the highest visible light absorption, was more efficient than P2 and P4 as a sensitizer of TiO(2). The surface binding (strength and stability) of C-complexes on TiO(2) is highly influenced by the number of carboxylate groups and is the most decisive factor in controlling the sensitization efficiency. A phosphonate anchor, however, can provide a stronger chemical linkage to TiO(2) surface, and the overall sensitization performance was less influenced by the adsorption capability of P-complexes. The apparent effect of the anchoring group number on the P-complex sensitization seems to be mainly related with the visible light absorption efficiency of each P-complex.     

Visible-light-sensitized production of hydrogen using perfluorosulfonate polymer-coated TiO2 nanoparticles: an alternative approach to sensitizer anchoring

TiO(2) sensitized by derivatized ruthenium bipyridyl complexes has been intensively investigated as a tool to utilize visible light. This article describes an alternative approach to attaching ruthenium complex sensitizers at the TiO(2)/H(2)O interface, which is a much simpler and more efficient way to produce hydrogen. The surface of TiO(2) particles are simply coated with perfluorosulfonate polymer (cation-exchange resin: Nafion), and then Ru(bpy)(3)(2+) (as a cationic form), whose bipyridyl ligands are not functionalized with carboxylic acid groups, are bound within the Nafion layer through electrostatic attraction. The visible-light-induced production of H(2) on Nf/TiO(2) using simple Ru(bpy)(3)(2+) as a sensitizer is far more efficient than that on Ru(dcbpy)(3)-TiO(2), upon which many sensitized photoelectrochemical conversion systems are based. Effects of various experimental parameters such as pH, concentration of Ru(bpy)(3)(2+), Nafion loading, and the kind of TiO(2) were investigated. Under optimized conditions, the H(2) production rate was about 80 mumol/h, which corresponds to an apparent photonic efficiency of 2.6%. The roles of the Nafion layer on TiO(2) in the sensitized H(2) production are proposed to be twofold: to provide binding sites for cationic sensitizers and to enhance the local activity of protons in the surface region.     

具有优异热稳定性的磷修饰氧化钛及其对水中污染物的降解

通过水热法制得磷修饰氧化钛,它在亚甲基蓝和对氯苯酚的降解以及消除大肠杆菌的实验中都表现出高于纯氧化钛的优异活性,甚至优于商品化催化剂P25.在捕获剂中降解亚甲基蓝的实验证实羟基自由基是最主要的活性氧物种,并且磷修饰氧化钛在光照下拥有较强的产生羟基自由基的能力,同时,磷修饰氧化钛具有非常高的热稳定性,直到950℃才会发生...     

碳和钇共掺杂对混相TiO2光催化性能的影响

TiO2因其毒性低、稳定性高、制备成本低廉而获得广泛应用,特别是作为光催化剂在降解环境污染物方面受到了广泛关注;然而,纯TiO2较大的光生载流子复合率和较宽的带隙限制了其应用.元素掺杂作为一种拓宽光催化剂光吸收能力的方法广泛应用于各种光催化剂的修饰改性,而两种具有光催化性能的TiO2相共存则能有效抑制光生载流子的复合,因此采取合适的方法有效利用这两种TiO2改性的方法制备得到更具实际应用潜质的光催化剂具有一定的可行性.本文通过简单的溶胶-凝胶过程向锐钛矿相与金红石相组成的混相TiO2中共掺杂碳和钇得到了一种活性较高的可见光响应光催化剂.采用粉末X射线衍射、拉曼光谱、X射线光电子能谱和透射电镜等表征手段研究了碳和钇掺杂对TiO2结构的影响,发现碳掺杂有利于金红石相的形成且材料具有更大的晶粒尺寸,钇掺杂则有利于锐钛矿相的形成且能细化材料的晶粒尺寸,提高材料的比表面积,导致材料更好的光催化活性.材料在30 W荧光灯光照条件下的光催化降解亚甲基蓝(MB)性能的研究显示,C-Y-TiO2样品具有比单掺杂和未掺杂样品更高的光催化活性,其顺序为C-Y-TiO2>Y-TiO2>C-TiO2>TiO2≈P25.此外,降解反应动力学研究表明C-Y-TiO2样品光降解MB的速率是未掺杂样品在相同条件下降解速率的3.5倍.不同钇掺杂含量样品的结构和光催化降解MB的研究结果表明,钇掺杂显著促进了锐钛矿相TiO2的形成.这说明钇可能仅掺杂进入锐钛矿相,因此合适的钇掺杂量才能有效形成最优化的光催化性能的混相TiO2.不同热处理温度下获得的样品的光降解MB特性也表明,一定的热处理温度有利于合适的锐钛矿相和金红石相的组成,从而有利于相间的协同效应.紫外-可见光谱和荧光光谱表征分析表明,碳和钇的掺杂都拓展了其吸收光谱到可见光区域,且抑制了光生电子和空穴对的复合,进而提高了材料的光催化活性.碳和钇共掺杂的混相TiO2具有较高可见光光催化活性的主要原因有两个方面:一是元素掺杂减小了TiO2的带隙使得材料具有可见光响应;二是金属和非金属元素在锐钛矿相与金红石相TiO2中不同的掺杂特性形成的协同效应,抑制了光生电子和空穴的复合.     

可控碳改性Pd/TiO2用于直接合成双氧水:非均相界面对催化性能的影响（英文）

双氧水(H2O2)是一种重要的绿色氧化剂,广泛应用于纺织、医疗、废水处理、军事等重要领域.目前, H2O2的工业生产以蒽醌法为主,该法设备投资大、运行成本高,同时工艺涉及大量的有机溶液,活性中间体蒽醌也会发生缓慢降解,产生有毒副产物.与蒽醌法相比,通过负载型贵金属催化剂催化H2与O2反应直接合成H2O2,过程绿色环保且生产工艺简单,引起了各界广泛关注.然而,从热力学上分析, H2和O2更容易反应生成H2O, H2O2只是该反应的中间产物,会继续发生加氢和直接分解反应生成H2O,导致H2和O2的低效利用,开发高H2O2选择性且高反应效率的催化剂已成为氢氧直接合成H2O2研究的重点与难点.目前大部分研究策略旨在通过调控或影响反应中心结构、价态来抑制H2O2的副反应,进而提升H2O2的选择性和反应效率;尽管已取得了良好的进展,但仍需发展新的调控策略来满足工业应用的要求.本课题组前期研究表明,促使H2O2从催化剂上脱附可以有效地提升H2O2的选择性和产率.相比于针对反应中心的调控,不稳定的H2O2从催化剂上快速脱附同样起到抑制H2O2参与副反应的作用.为此,本文提出一种炭量可控的非均一界面改性方法,以常规的Pd/TiO2作为研究对象,借助各种结构表征,发现炭物种在TiO2表面呈非均一分散状态,而且改性对于催化剂的几何结构影响较小;另外,催化剂表面的疏水性会随着碳含量的增加而增加,导致其与H2O2间的吸附能相应变小.反应结果显示,表面非均一的炭化改性技术可以显著提升Pd/TiO2催化剂的H2O2选择性和产率.通过构效关系分析,可知这种改性技术可以保持Pd颗粒与TiO2间相互作用的同时,还可以促进H2O2的快速脱附,进而提升改性Pd/TiO2催化剂的H2O2直接合成效率.该改性方法简单、易控,可拓展应用到其他类型催化剂的H2O2直接合成性能调控与改进.     

染料敏化可见光催化制氢研究进展

染料敏化是拓展宽禁带光催化剂激发波长范围、有效利用太阳光中可见光部分的重要手段. 本文介绍了染料敏化分解水制氢的基本原理, 综述了染料敏化剂、基质或载体、染料与基质的相互作用、产氢助催化剂以及电子牺牲剂的研究进展. 并对光敏化体系中电荷转移途径及稳定性问题进行了讨论.     

Highly conductive nanostructured C-TiO2 electrodes with enhanced electrochemical stability and double layer charge storage capacitance

The present work reports the structural and electrochemical properties of carbon-modified nanostructured TiO(2) electrodes (C-TiO(2)) prepared by anodizing titanium in a fluoride-based electrolyte followed by thermal annealing in an atmosphere of methane and hydrogen in the presence of Fe precursors. The C-TiO(2) nanostructured electrodes are highly conductive and contain more than 1 × 10(10) /cm(2) of nanowires or nanotubes to enhance their double layer charge capacitance and electrochemical stability. Electrogenerated chemiluminescence (ECL) study shows that a C-TiO(2) electrode can replace noble metal electrodes for ultrasensitive ECL detection. Dynamic potential control experiments of redox reactions show that the C-TiO(2) electrode has a broad potential window for a redox reaction. Double layer charging capacitance of the C-TiO(2) electrode is found to be 3 orders of magnitude higher than an ideal planar electrode because of its high surface area and efficient charge collection capability from the nanowire structured surface. The effect of anodization voltage, surface treatment with Fe precursors for carbon modification, the barrier layer between the Ti substrate, and anodized layer on the double layer charging capacitance is studied. Ferrocene carboxylic acid binds covalently to the anodized Ti surface forming a self-assembled monolayer, serving as an ideal precursor layer to yield C-TiO(2) electrodes with better double layer charging performance than the other precursors.     

Molecular engineering of organic sensitizers for solar cell applications

Novel organic sensitizers comprising donor, electron-conducting, and anchoring groups were engineered at molecular level and synthesized. The functionalized unsymmetrical organic sensitizers 3-{5-[N,N-bis(9,9-dimethylfluorene-2-yl)phenyl]-thiophene-2-yl}-2-cyano-acrylic acid (JK-1) and 3-{5'-[N,N-bis(9,9-dimethylfluorene-2-yl)phenyl]-2,2'-bisthiophene-5-yl}-2-cyano-acrylic acid (JK-2), upon anchoring onto TiO2 film, exhibit unprecedented incident photon to current conversion efficiency of 91%. The photovoltaic data using an electrolyte having composition of 0.6 M M-methyl-N-butyl imidiazolium iodide, 0.04 M iodine, 0.025 M LiI, 0.05 M guanidinium thiocyanate, and 0.28 M tert-butylpyridine in a 15/85 (v/v) mixture of valeronitrile and acetonitrile revealed a short circuit photocurrent density of 14.0 +/- 0.2 mA/cm2, an open circuit voltage of 753 +/- 10 mV, and a fill factor of 0.76 +/- 0.02, corresponding to an overall conversion efficiency of 8.01% under standard AM 1.5 sunlight. DFT/TDDFT calculations have been performed on the two organic sensitizers to gain insight into their structural, electronic, and optical properties. Our results show that the cyanoacrylic acid groups are essentially coplanar with respect to the thiophene units, reflecting the strong conjugation across the thiophene-cyanoacrylic groups. Molecular orbitals analysis confirmed the experimental assignment of redox potentials, while TDDFT calculations allowed assignment of the visible absorption bands.     

Hydrogen production from water by visible light using zinc porphyrin-sensitized platinized titanium dioxide

The rate of H₂ evolution from aqueous suspensions of Pt/TiO₂ with deposited zinc porphyrin in the presence of an electron donor (EDTA, triethanolamine, ascorbic and oxalic acids) during irradiation by visible light (λ > 520 nm) was optimized with respect to the concentrations of platinum, zinc porphyrin and electron donor. The relationship between the rate of hydrogen evolution and pH has a maximum at pH 4–5 for EDTA, ascorbic and oxalic acids, as does the adsorption of these donors on TiO₂. In the case of triethanolamine, H₂ production increases sharply in alkaline solutions when the triethanolamine molecules are deprotonated. The photostability of the photosensitizer increases on the semiconductor. Turn-over numbers for the zinc porphyrins varied from 50 for water-soluble zinc porphyrin up to 150–185 for water-insoluble sensitizers.     

Iterative multifunctionalization of unactivated C-H bonds in piperidines by way of intramolecular Rh(II)-catalyzed aminations

Efficient stereocontrolled synthesis of di-, tri-, tetra-, and pentasubstituted piperidines from simple 2-sulfamoyloxymethyl piperidine derivatives has been performed by way of intramolecular Rh-catalyzed amination of saturated C-H bonds. In this process, the sulfamoyloxymethyl arm was directly or indirectly involved in the functionalization of every saturated methylene group of the piperidine ring at C-3, C-4, C-5, and C-6. Direct application to the total synthesis of iminosugars and related compounds demonstrated the synthetic potential of this strategy.     

Zinc Porphyrins with a Pyridine‐Ring‐Anchoring Group for Dye‐Sensitized Solar Cells

Anchoring groups are extremely important in controlling the performance of dye‐sensitized solar cells (DSCs). The design and characterization of sensitizers with new anchoring groups, in particular non‐carboxylic acid groups, has become a recent focus of DSC research. Herein, new donor? π? acceptor zinc? porphyrin dyes with a pyridine ring as an anchoring group have been designed and synthesized for applications in DSCs. Photophysical and electrochemical investigations demonstrated that the pyridine ring worked effectively as an anchoring group for the porphyrin sensitizers. DSCs that were based on these new porphyrins showed an overall power‐conversion efficiency of about 4.0 % under full sunlight (AM 1.5G, 100 mW cm^?2).     

TiO_2-CuPcTs敏化薄膜光电流及可见光光催化性能

以四磺酸酞菁铜(CuPcTs)为敏化剂,玻璃和图案化的氧化铟锡(ITO)分别作为基底,制备了敏化薄膜TiO2-CuPcTs和ITO/TiO2-CuPcTs/ITO敏化器件.以罗丹明B(RhB)的可见光光催化降解为模型反应评价敏化薄膜的光催化性能.敏化薄膜采用UV-vis和Raman技术进行表征,同时利用敏化器件的结构特性,测定其在氮气和纯水体系下的光电流.研究结果表明,TiO2-CuPcTs可以有效地将光谱响应拓宽到可见光区,一级反应速率常数为空白TiO2薄膜的3.7倍.TiO2-CuPcTs薄膜光催化降解RhB的重复性能稳定.与ITO/TiO2/ITO器件相比,敏化器件ITO/TiO2-CuPcTs/ITO具有较高的光电流信号,验证了激发态的CuPcTs能够将电子转移到TiO导带上的敏化机理.     

C-N共掺杂纳米TiO2的制备及其光催化制氢活性

采用TiCN粉末在空气气氛中不同温度下焙烧制得C-N共掺杂的纳米TiO2光催化剂. 利用X射线衍射(XRD)、透射电镜(TEM)、紫外-可见漫反射光谱(UV-Vis DRS)以及X射线光电子能谱(XPS)等手段对其进行了表征. XRD和XPS结果表明, TiCN中的C和N元素可以被O取代得到C-N共掺杂的TiO2. DRS结果表明, 所制得的C-N共掺杂的TiO2在可见光区域比P25表现出更强的光吸收性能. 以Na2S-Na2SO3体系为牺牲剂, 分别考察了不同温度下焙烧得到的C-N共掺杂的TiO2光催化分解水产氢的活性. 结果表明, 550 ℃焙烧得到的C-N共掺杂的TiO2在紫外光照射下具有最高的光解水产氢活性,产氢速率为41.1 μmol·h-1, 大于P25的光解水产氢活性(26.2 μmol·h-1). 在紫外-可见光照射下, 光解水产氢速率仅为0.2 μmol·h-1, 这可能是由于C-N掺杂引起的可见光范围的吸收对光催化分解水产氢活性的贡献较小.     

表面相结结构在促进光催化电荷分离中的应用

二十世纪八十年代以来,特别是近十年,光催化研究在利用可再生能源太阳能的道路上飞速发展。越来越多的研究表明,相结结构的构筑是有效提高半导体光催化剂性能的重要策略。其中, TiO2作为重要的模型光催化剂,其相关研究成果呈现出指数增长的趋势。本综述围绕TiO2模型光催化剂,主要介绍TiO2表面相结的研究成果,包括TiO2表面相的表征、锐钛矿：金红石TiO2相结用于光催化产氢研究、TiO2相结在光催化中作用的最新认识等。在表征方面,通过表面灵敏的紫外拉曼光谱研究了TiO2相变过程中表面相结构的变化,结合可见拉曼以及XRD表征揭示了TiO2独特的相变过程,即相变始于锐钛矿粒子的界面处,小粒子逐渐团聚为大粒子,致其相变从大粒子体相开始最终扩展到整个粒子。使用CO, CO2探针红外光谱,根据锐钛矿和金红石表面吸附物种的差异,进一步证实了锐钛矿：金红石表面相结结构,为紫外拉曼光谱的表面表征特性提供坚实证据。同时,利用发光光谱观察到锐钛矿晶相的可见发光带和金红石晶相的近红外发光带,并基于此给出了TiO2材料表面相结结构的荧光表征新方法。此外荧光光谱还提供了锐钛矿、金红石相中载流子动力学信息,揭示了束缚态在光催化中的作用。在光催化应用方面,观察到混相结构TiO2较单独锐钛矿及金红石相具有更高的光催化产氢活性,通过在较大金红石颗粒上担载纳米锐钛矿粒子,证明了相结结构在提高光催化活性中的核心作用,并首次提出了锐钛矿：金红石表面异相结结构概念,推断其对电荷分离的促进作用是最终提高反应活性的原因。之后将此概念应用到改善商品TiO2(P25)光催化活性中,通过可控热处理精细调控P25的表面相结构,在光催化重整生物质衍生物产氢实验中,成功将P25光催化产氢活性提高3?5倍。之后发展了新的TiO2表面控制方法,通过加入Na2SO4等相变控制剂,延缓了TiO2从锐钛矿向金红石的相变过程,在较高温度下实现TiO2相结结构的调控,最终可将P25光催化重整甲醇制氢的活性提高6倍,同时通过高分辨电镜清晰观察到锐钛矿：金红石相结的原子层生长接触。在相结作用机理方面,多种时间分辨光谱技术以及理论计算被用作探索锐钛矿：金红石相结处的电子转移机理。通过时间分辨红外光谱对TiO2表面相结结构作用的研究,特别是利用锐钛矿、金红石不同的瞬态吸收光谱特征,证明了锐钛矿：金红石相结处的载流子转移过程,存在锐钛矿向金红石的电子转移过程。模型光催化剂TiO2相结的研究成果,加深了对光催化机理的认识,促进新型高效光催化体系的设计合成。     

D-π-A dye system containing cyano-benzoic acid as anchoring group for dye-sensitized solar cells

A D-π-A dye (KM-1) incorporating cyano-benzoic acid as a new acceptor/anchoring group has been synthesized for dye-sensitized solar cells (DSCs) with a high molar extinction coefficient of 66,700 M(-1) cm(-1) at 437 nm. Theoretical calculations show that the hydrogen bond between -CN and surface hydroxyl leads to the most stable configuration on the surface of TiO(2). In addition, the adsorption of the dye on TiO(2) follows a Brunauer-Emmett-Teller (BET) isotherm. Multilayer adsorption of KM-1 on TiO(2) seems to take place particularly at higher dye concentrations. DSC device using KM-1 reached a maximum incident photon-to-current conversion efficiency (IPCE) of 84%, with a solar to electric power conversion efficiency (PCE) of 3.3% at AM1.5 G illumination (100 mW cm(-2)). This new type of anchoring group paves a way to design new dyes that combine good visible light harvesting with strong binding to the metal oxide surface.     

Impact of ligand modification on hydrogen photogeneration and light-harvesting applications using cyclometalated iridium complexes

To explore structure-activity relationships with respect to light-harvesting behavior, a family of bis-cyclometalated iridium complexes [Ir(C^N)(2)(Hbpdc)] 2-5 (where C^N = 2-phenylbenzothiazole and its functionalized derivatives, and H(2)bpdc =2,2'-bipyridine-4,4'-dicarboxylate) was synthesized using a facile method. The photophysical and electrochemical properties of these complexes were investigated and compared to those of analogue 1 (C^N = (4-trifluoromethyl)-2-phenylbenzothiazole); they were also investigated theoretically using density functional theory. The molecular structures of complexes 2-4 were determined by X-ray crystallography, which revealed typical octahedral coordination geometry. The structural modifications involved in the complexes were accomplished through the attributes of electron-withdrawing CF(3) and electron-donating NMe(2) substituents. The UV-vis spectra of these species, except for that of 5, displayed a broad absorption in the low-energy region, which originated from metal-to-ligand charge-transfer transitions. These complexes were found to exhibit visible-light-induced hydrogen production and light-to-electricity conversion in photoelectrochemical cells. The yield of hydrogen production from water using these complexes was compared, which revealed substantial dependences on their structures, particularly on the substituent of the cyclometalated ligand. Among the systems, the highest turnover number of 1501 was achieved with complex 2, in which the electron-withdrawing CF(3) substituent was connected to a phenyl ring of the cyclometalated ligand. The carboxylate anchoring groups made the complexes highly suitable for grafting onto TiO(2) (P25) surfaces for efficient electron transfer and thus resulted in an enhancement of hydrogen evolution compared to the unattached homogeneous systems. In addition, the combined incorporation of the electron-donating NMe(2) group and the electron-withdrawing CF(3) substituent on the cyclometalated ligand caused complex 5 to not work well for hydrogen production. Their incorporation, however, enhanced the performance of 5 in the light-harvesting application in nanocrystalline TiO(2) dye-sensitized solar cells, which was attributed to the intense absorption in the visible region.     

Donor-π-Acceptors Containing the 10-(1,3-Dithiol-2-ylidene)anthracene Unit for Dye-Sensitized Solar Cells

Two donor-acceptor molecular tweezers incorporating the 10-(1,3-dithiol-2-ylidene)anthracene unit as donor group and two cyanoacrylic units as accepting/anchoring groups are reported as metal-free sensitizers for dye-sensitized solar cells. By changing the phenyl spacer with 3,4-ethylenedioxythiophene (EDOT) units, the absorption spectrum of the sensitizer is red-shifted with a corresponding increase in the molar absorptivity. Density functional calculations confirmed the intramolecular charge-transfer nature of the lowest-energy absorption bands. The new dyes are highly distorted from planarity and are bound to the TiO(2) surface through the two anchoring groups in a unidentate binding form. A power-conversion efficiency of 3.7?% was obtained with a volatile CH(3) CN-based electrolyte, under air mass 1.5 global sunlight. Photovoltage decay transients and ATR-FTIR measurements allowed us to understand the photovoltaic performance, as well as the surface binding, of these new sensitizers.     

New type of organic sensitizers with a planar amine unit for efficient dye-sensitized solar cells

A new type of organic sensitizers incorporating a planar amine unit have been synthesized and demonstrated to be a highly efficient sensitizers, showing evidence of lateral interactions on the TiO(2) surface. Under standard global air mass 1.5 solar conditions, the JK-98 sensitized cell gave a short circuit photocurrent density (J(sc)) of 16.78 mA cm(-2), an open-circuit voltage (V(oc)) of 0.745 V, and a fill factor (ff) of 0.70, corresponding to an overall conversion efficiency (η) of 8.71%.     

染料在纳米TiO2薄膜表面吸附性能的研究

采用溶胶－凝胶法制备纳米TiO2薄膜，并通过吸附染料形成染料／TiO2复合薄膜。分析了染料与TiO2薄膜的相互关系，利用紫外可见、比表面等技术研究染料在纳米TiO2薄膜表面的吸附性能，并计算出TiO2薄膜对染料的最大吸附率。研究表明，染料溶液浓度、温度以及TiO2薄膜浸泡时间对染料吸附量有着显著的影响，染料的吸附性能直接影响着太阳能电池的光电转换效率。     

Enhanced Charge Separation Efficiency in Pyridine‐Anchored Phthalocyanine‐Sensitized Solar Cells by Linker Elongation

A series of zinc phthalocyanine sensitizers ( PcS22 – 24 ) having a pyridine anchoring group are designed and synthesized to investigate the structural dependence on performance in dye‐sensitized solar cells. The pyridine‐anchor zinc phthalocyanine sensitizer PcS23 shows 79 % incident‐photon to current‐conversion efficiency (IPCE) and 6.1 % energy conversion efficiency, which are comparable with similar phthalocyanine dyes having a carboxylic acid anchoring group. Based on DFT calculations, the high IPCE is attributed with the mixture of an excited‐state molecular orbital of the sensitizer and the orbitals of TiO₂. Between pyridine and carboxylic acid anchor dyes, opposite trends are observed in the linker‐length dependence of the IPCE. The red‐absorbing PcS23 is applied for co‐sensitization with a carboxyl‐anchor organic dye D131 that has a complementary spectral response. The site‐selective adsorption of PcS23 and D131 on the TiO₂ surface results in a panchromatic photocurrent response for the whole visible‐light region of sun light.