High-efficacy antimicrobial cellulose grafted by a novel quaternarized N-halamine

A novel quaternarized N-halamine precursor (3-chloro-2-hydroxypropyl)-(5, 5-dimethylhydantoinyl-1-ylmethyl)-dimethylammonium chloride (CDDAC), has been synthesized by a very facile two-step reaction. The two-step synthesis of CDDAC occurred at room temperature with common reactors, so the production of CDDAC could be easily enlarged to an industrial scale. Without any work-up, the final reaction solution which contained CDDAC could be directly used as grafting solution. CDDAC could be effectively grafted onto the surface of cellulose by a dehydrochlorination reaction. CDDAC grafted on cellulose was converted to N-halamine structure which showed powerful antimicrobial property by a chlorination reaction in the diluted NaClO solution. The antimicrobial tests showed that the chlorinated cellulose grafted with CDDAC was capable of 5-log inactivation of S. aureus and E. coli within 5 min. Also, the washing durability and storage stability of chlorinated cellulose grafted with CDDAC were investigated.     

Preparation of quaternarized N-halamine-grafted graphene oxide nanocomposites and synergetic antibacterial properties

At present, frequent outbreaks of bacteria and viruses have seriously affected people's normal lives. Therefore, the study of broad-spectrum antibacterial nanocomposites is very promising. However, most antibacterial materials have some disadvantages, such as single bactericidal mechanisms and unrepeatable use. Based on the current situation, a kind of nanocomposite with three structures of graphene oxide (GO), quaternary ammonium salt (QAs) and N-halamine was prepared, which showed synergistic effect to improve antibacterial activity and combined with a variety of sterilization mechanisms. Meanwhile, GO can provide richer ways of sterilization and high specific surface area, which is conducive to the grafting of quaternarized N-halamine. The advantages of physical sterilization of GO, charge adsorption of QAs, reuse of N-halamine and efficient sterilization are fully utilized. The results showed that the quaternarized N-halamine-grafted GO was obtained successfully. GO grafted with quaternarized N-halamine polymer showed strong speedy bactericidal activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) (99%). It had good storage and regeneration properties.     

Antibacterial cotton treated with N-halamine and quaternary ammonium salt

Quaternary ammonium salts and N-halamines are widely used as biocides in antimicrobial coatings, and have been extensively studied over the past two decades. In this work, 5,5-dimethyl-3-(3′-triethoxysilylpropyl)hydantoin (SPH), and 3-(trimethoxysilylpropyl) octadecyl dimethyl ammonium chloride (SPODA) were synthesized and coated onto cotton fibers using a pad-dry process (PD) and the traditional pad-dry-cure process (PDC). The coated cotton swatches were characterized by FT-IR and SEM. The quaternary ammonium salt showed a relatively lower inactivating bacteria efficacy than did the N-halamine compounds. The chlorinated swatches coated with both SPH and SPODA using the PD process could inactivate about 7 logs of the Staphylococci aureus within 5–10 min and 7 logs of Escherichia coli O157:H7 within 10–30 min, respectively. The addition of quats in N-halamine coatings improved antimicrobial activity against Gram-negative bacteria E. coli O157:H7. However, this result was not observed when the PDC process was applied in coatings because of the increasing hydrophobicity of the coated samples under high coating temperature.     

Preparation of rechargeable biocidal polypropylene by reactive extrusion with diallylamino triazine

Biocidal polypropylene (PP) was prepared by using a reactive extrusion process, in which PP was grafted with an N-halamine precursor, 2, 4-diamino-6-diallylamino-1, 3, 5-triazine (NDAM). After chlorination the grated PP was converted to biocidal halamine structures. Effects of monomer and initiator concentration on grafting yield, thermal properties, and biocidal efficacy were studied. The Fourier transformed spectroscopy (FTIR) results and nitrogen analysis confirmed the graft polymerization on PP backbone during the reactive extrusion. The results also indicated that at low monomer concentration, increase in initiator concentration led to increase in PP chain scission and decrease in mixing torque, or polymer chain length. As the monomer concentration increases, grafted monomer content in the products showed a steady increase, indicating more grafting copolymerization in the system. The halogenated products exhibited potent antimicrobial properties against Escherichia coli, and the antimicrobial properties were durable and regenerable.     

The antimicrobial activity of the cotton fabric grafted with an amino-terminated hyperbranched polymer

An amino-terminated hyperbranched polymer (HBP-NH₂) was grafted to cotton fabric by a reaction between the aldehyde groups of oxidized cotton fabric and the amino groups of the HBP-NH₂ to provide cotton fabric with durable antimicrobial properties. The antimicrobial activities of the HBP-NH₂ aqueous solutions and the HBP-NH₂ grafted cotton fabrics were evaluated quantitatively against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). The results indicated that the HBP-NH₂ grafted cotton fabric showed 92% of bacterial reduction to S. aureus and 95% of bacterial reduction to E. coli, respectively. The antimicrobial activities of the HBP-NH₂ grafted cotton fabrics were maintained at over 91% reduction level even after being exposed to 20 consecutive home laundering conditions. Several influence factors, which may affect the amount of HBP-NH₂ grafted onto the cotton fabrics, were also discussed.     

Preparation of antibacterial cellulose with a monochloro‐s‐triazine‐based N‐halamine biocide

A novel monochloro‐s‐triazine‐based N‐halamine precursor, 4‐(4‐(5,5‐dimethylhydantoin‐3‐ethylamino)‐6‐chloro‐1,3,5‐triazinylamino)‐benzenesulfonate (HB), was synthesized and characterized by proton nuclear magnetic resonance. The reactive dyes dyeing method was applied to bond HB onto cotton fabrics, and the treated fabrics were confirmed by Fourier transform infrared spectrometer and scanning electron microscope. The chlorinated HB‐treated fabrics showed excellent antibacterial efficacies against Staphylococcus aureus and Escherichia coli O157:H7 and inactivated all inoculated bacteria within 1 min of contact. Interestingly, it was found that the finishing process and following chlorination caused smaller tensile strength loss of cotton fabrics than the traditional pad‐dry‐cure method. Furthermore, the antimicrobial cotton fabrics exhibited good stability and regenerability. Copyright © 2015 John Wiley & Sons, Ltd.     

Antimicrobial activity of hydrophobic cotton coated with N‐halamine

γ‐(β‐Hydroxy‐γ‐5,5‐dimethylhydatoin)‐propyltriethoxysilane, a N‐halamine precursor, was synthesized with 3‐aminopropyltriethoxysilane and 3‐glycidyl‐5,5‐dimethylhydantoin. The N‐halamine precursor was tethered to the cotton fabric through ether linkages. The treated fabrics can be rendered excellent antimicrobial activity through a bleaching process. It can inactivate 100% of the Staphylococcus aureus and Escherichia coli O157:H7 with a contact time of 10 min and 30 min, respectively. Over 30% of the chlorine could be regained after the equivalent of 50 machine washes and rechlorination. The coatings resulted in a significant increase of hydrophobicity of cotton samples. In addition, the wrinkle recovery angle of the treated fabrics increased to some degree. Copyright © 2014 John Wiley & Sons, Ltd.     

Improved UV stability of antibacterial coatings with N-halamine/TiO2

The outstanding advantages of N-halamine materials over other antimicrobial materials are their durable and rechargeable antimicrobial properties, as well as their efficacies in inactivating a broad spectrum of pathogens. Theoretically, the oxidative chlorine of antimicrobial cotton coated with N-halamine hydantoin diol can be restored upon loss of its biocidal efficacy after exposure to ultraviolet light. In this work nano-titania particles were added into the coating solutions containing N-halamine diol and 1,2,3,4-butanetetracarboxylic acid (BTCA), and the coatings were applied to produce antimicrobial cellulose with improved UV stability. The treated cotton fabrics were characterized by FT-IR, SEM, XRD, and XPS. The effects of the coatings on tensile strength and wrinkle recovery angle were investigated. Biocidal efficacies of fabrics coated with hydantoin diol and diol/TiO₂ against Staphylococcus aureus (ATCC 6538) and Escherichia coli O157:H7 (ATCC 43895) were determined using a modified AATCC 100-1999 method and showed excellent antimicrobial properties against these two bacterial species within a brief contact times. It was found that the addition of Nano-TiO₂ in the antimicrobial coatings, especially rutile titanium dioxide, could improve the UV light stability of the chlorinated fabrics coated with hydantoin diol significantly. The UV light stability of N-halamine coatings were enhanced with increasing amounts of rutile TiO₂.     

Dyeing of cotton with thyme and pomegranate peel

Application of natural dyes for textiles is increasing due to awareness of environment, ecology, and pollution control. The purpose of this study is to determine the color, antimicrobial, and fastness properties of cotton fabrics dyed with thyme and pomegranate peel without a mordanting process. In this way, it was planned to avoid use of metallic mordants (heavy-metal salts) and prevent heavy-metal pollution for ecological production. Additionally, a variety of the most commonly used mordants, namely potassium aluminum sulfate, copper(II) sulfate, iron(II) sulfate, and tin(II) chloride, were used for mordanting of cotton fabrics in order to compare the differently mordanted and unmordanted dyed fabrics’ color efficiencies (K/S) and CIE L ^* a ^* b ^* color values. It was found that mordant type had an effect on color efficiency and the color coordinates of fabrics dyed with both thyme and pomegranate fruit peel. Moreover, the antimicrobial properties of the fabrics only dyed directly with thyme and pomegranate peel without any mordanting process were determined to demonstrate the usability of these natural dye sources without use of any mordanting agents. The obtained antimicrobial activities were compared with undyed samples. Undyed samples showed no antimicrobial activity, whereas significant antimicrobial activity was obtained after the dyeing procedure using thyme and pomegranate peel on unmordanted fabrics. Washing, rubbing, perspiration, and lightfastness properties of dyed fabrics were also evaluated. Thyme and pomegranate fruit peel as natural dye sources revealed sufficient results even for unmordanted samples.     

Using graphene/TiO2 nanocomposite as a new route for preparation of electroconductive,self-cleaning,antibacterial and antifungal cotton fabric without toxicity

A novel and efficient process is reported for fabrication of electroconductive, self-cleaning, antibacterial and antifungal cellulose textiles using a graphene/titanium dioxide nanocomposite. Cotton fabric was loaded with graphene oxide using a simple dipping coating method. The graphene oxide-coated cotton fabrics were then immersed in TiCl₃ aqueous solution as both a reducing agent and a precursor to yield a fabric coated with graphene/titanium dioxide nanocomposite. The crystal phase, morphology, microstructure and other physicochemical properties of the as-prepared samples were characterized by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, Raman spectroscopy and UV-Vis reflectance spectroscopy. Electrical resistance, self-cleaning performance, antimicrobial activity and cytotoxicity of treated fabrics were also assessed. The electrical conductivity of the graphene/titanium dioxide nanocomposite-coated fabrics was improved significantly by the presence of graphene on the surface of cotton fabrics. The self-cleaning efficiency of the treated fabrics was tested by degradation of methylene blue in aqueous solution under UV and sunlight irradiations. The results indicated that the decomposition rates of methylene blue were improved by the addition of graphene to the TiO₂ treatment on fabrics. Moreover, the graphene/titanium dioxide nanocomposite-coated cotton samples had negligible toxicity and possessed excellent antimicrobial activity.     

Epoxide tethering of polymeric <Emphasis Type="Italic">N</Emphasis>-halamine moieties

Three heterocyclic N-halamine structures containing amine, amide, or both functional groups were immobilized onto cotton fabric through epoxide tethering. The coatings were rendered biocidal upon exposure to dilute household bleach solution. The coatings exhibited superior biocidal functionality with complete inactivation of about 6 logs of Staphylococcus aureus and Escherichia coli O157:H7 within 2–10 min contact time depending on the structure. Moreover, the coatings were quite stable against repeated laundering so that recharging was not even necessary after 50 washing cycles. Stability of the coatings against ultraviolet light exposure was studied with a comparison of the amide- and amine-containing N-halamines.     

Preparation, characterization, and antimicrobial property of cotton cellulose fabric grafted with poly (propylene imine) dendrimer

Two generations of poly (propylene imine) dendrimer with amino terminated groups (G2- and G5-PPI-NH₂) were grafted on cotton cellulose fabric using cross linking agents (citric or glutaric acids). Fourier transform infrared (FTIR) spectroscopy identified ester groups which were formed between hydroxyl groups of the cotton fabric and carboxylic groups of the cross linking agents. Also, attenuated total reflectance-FTIR (ATR-FTIR) analysis confirmed formation of amide groups between the carboxylic groups of the cross linking agents and the amino end groups of the dendrimers. Nitrogen content (N-content) analysis revealed the presence of the dendrimers on the cotton fabric even after 5 washing cycles. In order to study the dispersion of the PPI dendrimers on the surface of the cotton fabric, field emission scanning electron microscopy (FE-SEM) was performed. The particle size distribution of the G2- and G5-PPI-NH₂ aqueous solutions was also determined by dynamic light scattering (DLS) analysis. Antimicrobial activity of the PPI dendrimer aqueous solutions and the cotton cellulose fabric grafted with the dendrimers was evaluated both quantitatively and qualitatively against Gram-positive bacterium (Staphylococcus aureus), Gram-negative bacteria (Pseudomonas aeruginosa and Escherichia coli) and fungus (Candida albicans). The dendrimer grafted cotton cellulose fabric exhibited a 99 % reduction in bacterial counts against S. aureus, E. coli and C. albicans. The antimicrobial activities of the grafted cotton cellulose fabric with the PPI dendrimers were maintained even after 5 washing cycles.     

Active antibacterial coating of cotton fabrics with antimicrobial proteins

The prevention of bacteria colonization by immobilizing proteins with antimicrobial activity onto cotton fabrics was investigated. Such coatings have potential applications in medical dressing materials used in wound care and healing. Two antimicrobial proteins lysozyme and hydramacin-1 (HM-1) were surface immobilized through two linkers (3-aminopropyl) triethoxysilane (APTES) and citric acid in the presence of the water soluble carbodiimide coupling reagent 1-cyclohexyl-3-(2-morpholinoethyl)carbodiimide metho-p-toluenesulfonate. Surface composition analysis by attenuated total reflection-Fourier transform infrared and X-ray photoelectron spectroscopies confirmed formation of the protein-cellulose conjugates. Antimicrobial activities of the different functionalized surfaces were found to vary between APTES and citric acid directed coatings. Citric acid immobilized lysozyme treated samples demonstrated superior activity against Gram-positive Bacillus subtilis, whereas APTES immobilized HM-1 treated samples demonstrated an advantage in inhibiting the growth of Gram-negative Escherichia coli. The antibacterial activity and stability of citric acid immobilized protein fabrics following sonication, boiling and chemical treatment were noticeably higher than that of the corresponding APTES immobilized protein fabrics. The dual coating of fibers with both antimicrobial proteins afforded efficient antimicrobial activities against both bacterial species. The results suggest that coating cotton fibers with antimicrobial proteins and peptides represents a feasible approach for developing active surfaces that prohibit growth and colonization of bacterial strains and can be potentially used in medical cotton-based fabrics.

     

UV-induced graft polymerization of acrylamide on cellulose by using immobilized benzophenone as a photo-initiator

Photo-active moiety, benzophenone, was incorporated onto cotton fabrics by using butyl tetracarboxylic acids (BTCA). Then, grafting of polyacrylamide on the cotton fabrics was performed by exposing the fabrics to longer UV wavelength irradiation. The chemical structure and thermal properties of the polyacrylamide grafted cotton fabrics were investigated by SEM, FTIR, XRD, and TGA, and the results verified the successful grafting of polyacrylamide on cotton fabrics. Also, it was observed that active chlorine contents were created on the polyacrylamide grafted cotton fabrics through simple chlorination process, and the chlorine treated cotton fabrics showed excellent antibacterial abilities like the powerful cyclic amide halamines.     

Antibiotic protected silver nanoparticles for microbicidal cotton

Surface coating of metal nanoparticles is one of the major aspects to be optimized in the design of antimicrobial nanoparticles. The novelty of this work is that antimicrobial derivatives have been used as stabilizers to protect silver nanoparticles (Ag NPs). Microbicidal activity studies of fabricated cotton textiles coated with these Ag@Antibio were performed. Protective ligand layers of Ag NPs resulted to be a deterministic factor in their antimicrobial activity. The best bactericidal activity was obtained for Fabric TAM (coated with Ag NPs with triarylmethane derivates in surface, Ag@TAMSH), with a bacterial decrease of 3 log units for the S. aureus strain. Intrinsic antibiotic activity and partial positive charge of the TAMSH probably enhanced their antimicrobial effects. Fabric Eu (coated with Ag NPs with eugenol derivates in surface, Ag@EugenolSH) and Fabric FQPEG (coated with Ag NPs embedded in PEG-fluoroquinolone derivatives in surface, Ag@FQPEG) displayed antibacterial activity for both Staphylococcus aureus and Pseudomonas aeruginosa strains. These coated antimicrobial cotton fabrics can be applied in different medical textiles.     

Grafted antimicrobial cotton fabrics with N-halamine groups via atom transfer radical polymerization

Cellulose - An N-halamine precursor 2-(3-(6-methyl-4-oxo-1,4-dihydropyrimidin-2-yl)ureido)ethyl methacrylate (SCMHBMA) was synthesized and grafted on cotton fabrics via atom transfer radical...     

Characterization of N-isopropyl acrylamide/acrylic acid grafted polypropylene nonwoven fabric developed by radiation-induced graft polymerization

Radiation-induced graft copolymerization of N-isopropylacrylamide (NIPAAm) and acrylic acid (AA) mixture was carried out on polypropylene nonwoven fabric to develop a thermosensitive material and has been found to affect the thermal and physical characteristics of fabric. The grafted fabrics with different monomer ratios were characterized by thermal gravimetric analysis (TGA), fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), X-ray diffraction (XRD), contact angle and atomic force microscopy (AFM). Results of FTIR clearly indicated that poly(acrylic acid) and poly(N-isopropyl acrylamide) were successfully grafted onto the membrane surface. TGA results showed that the thermal stability of PP fabric increased after grafting of NIPAAm/AA. The crystallinity values from DSC and XRD were found to decrease with increase in degree of grafting because of the addition of grafted chains within the noncrystalline region. The decrease in contact angles of the grafted fabric with an increase of the degree of grafting shows that PNIPAAm/PAA exists as the hydrophilic component. The increase in surface roughness after grafting was observed by AFM.     

Synthesis of gold nanoparticles using herbal Acorus calamus rhizome extract and coating on cotton fabric for antibacterial and UV blocking applications

Gold nanoparticles (AuNPs) have been synthesized by greener method using chloroauric acid as precursor and extract of Acorus calamus rhizome as reducing agent. Formation of AuNP was confirmed by the presence of Surface Plasmon Resonance (SPR) peak in UV–Visible spectral analysis. XRD and FT-IR spectral analyses were performed for characterization. SEM images show spherical morphology and HR-TEM images reveal nanosize of AuNPs. The AuNPs were then coated on cotton fabric by pad-dry-cure method and characterized by SEM with EDAX technique. The results reveal the deposition of AuNPs on the surface of cotton fabric. Uncoated cotton, neat extract coated cotton and extract containing AuNPs coated cotton fabrics were then tested for antibacterial activity against Gram positive (Staphylococcus aureus) and Gram negative (Escherichia coli) bacterial strains by AATCC 100 test method. It showed that the extract containing AuNPs coated cotton fabric had higher antibacterial activity than other test samples against E. coli. UV-DRS analysis performed on extract containing AuNPs coated cotton fabric showed improved UV-blocking property than uncoated cotton fabric and neat extract coated cotton fabric.     

Antimicrobial efficacy and light stability of N-halamine siloxanes bound to cotton

N-halamine silane syntheses and coatings of cotton fabrics as siloxanes were addressed for a series of silanes. The coated fabrics were chlorinated by exposure to dilute sodium hypochlorite with a range of chlorine loadings from 0.20% to 0.26%. Two types of N–Cl moieties were involved in the N-halamine siloxanes, amine and amide. The siloxane-coated cotton swatches were very effective in inactivating Escherichia coli O157:H7 and Staphylococcus aureus, each in 10 min contact time. The N–Cl bond and compound stabilities under UV irradiation and ambient light exposure were also investigated. Both UV and laboratory light stability tests show that most of the chlorine on cotton coated with 3-(3-triethoxysilylpropyl)-7,7,9,9-tetramethyl-1,3,8-triazaspiro[4.5]decane-2,4-dione could be regenerated after irradiation, while most of the lost chlorine from 5,5-dimethyl-3-(3′-triethoxysilylpropyl)hydantoin and 4-[3-triethoxysilylpropoxyl]-2,2,6,6-tetramethylpiperidine could not be recovered upon rechlorination.     

Improved microwave absorption and electrostatic charge dissipation efficiencies of conducting polymer grafted fabrics prepared via in situ polymerization

Polyaniline (PANI) and polypyrrole (PPY) were grafted over cotton fabrics by in situ polymerization. FTIR spectra show systematic shifting of bands corroborating surface grafting of conducting polymers on cotton fabric. SEM images revealed that the surface coating of PANI was smoother than PPY. However, better control over coating thickness and uniformity was achieved in PPY fabric. The probable formation mechanism of grated fabrics has also been proposed. The good thermal stability and acceptable electronic conductivity values indicate that these fabrics could be used for electrostatic charge dissipation and microwave absorption. The antistatic studies have shown complete charge dissipation (decay time <0.01 sec). The microwave absorption studies of the conducting fabrics in X‐band (8.2–12.4 GHz) show absorption dominated total shielding effectiveness in the range ?11.3 to ?11.7 dB (>92% attenuation) and ?9.2 to ?9.6 dB (>88% attenuation) for fabrics grafted with PPY and PANI, respectively. Copyright © 2011 John Wiley & Sons, Ltd.