Natural Dyeing of Modified Cotton Fabric with Cochineal Dye

Natural dyes are not harmful to the environment owing to their biodegradability. For dye application to textiles, salts are necessary as mordant or electrolytes and make an environmental impact. In this paper, the influence of cationization during mercerization to the dyeing of cotton fabric with natural dye from Dactylopius coccus was researched. For this purpose, bleached cotton fabric as well as fabric cationized with Rewin OS was pre-mordanted using iron(II) sulfate heptahydrate (FeSO₄·7H₂O) and dyed with natural cochineal dye with and without electrolyte addition. For the characterization of surface changes after cationization, an electrokinetic analysis on SurPASS was performed and compared to pre-mordanting. For determination of dye exhaustion, the analysis of dye solution was performed on a UV/VIS spectrophotometer Cary 50 Solascreen. Spectrophotometric analysis was performed using a Datacolor 850 spectrophotometer, measuring remission ”until tolerance” and the whiteness degree, color parameters, color depth (K/S), and colorfastness of dyed fabric were calculated. Levelness was determined by visual assessment. Cationized cotton fabrics showed better absorption and colorfastness. Pre-mordanting and cationization showed synergism. The electrolytes improved the process of dye absorption. However, when natural dyeing was performed on cotton fabric cationized during mercerization, similar chromacity, uniform color, and colorfastness were achieved with and without electrolyte, resulting in pure purple hue of cochineal. For achieving a violet hue, pre-mordanting with Fe-salt was needed. Therefore, salt can be reduced or even unnecessary, which makes this process of natural dyeing more environmentally friendly.     

Effect of mercerization and gamma irradiation on the dyeing behaviour of cotton using stilbene based direct dye

The dyeing behaviour of mercerized and gamma irradiated cotton fabric using stilbene based direct dye has been investigated. The fabric was treated with different concentrations of alkali to optimize the mercerization. The optimum mercerized cotton fabric was irradiated to absorbed doses of 2, 4, 6, 8 and 10 kGy using Cs-137 gamma irradiator. Dyeing was performed using irradiated and un-irradiated cotton with dye solutions. The dyeing parameters such as temperature, time of dyeing, pH of dyeing solutions and salt concentration were optimized. The colour strength values of dyed fabrics were evaluated by comparing irradiated and un-irradiated cotton in CIE Lab system using Spectra flash SF650. Methods suggested by International Standard Organization (ISO) were employed to study the effect of gamma irradiation on the colourfastness properties of dyed fabric. It was found that mercerized and irradiated cotton have not only improved the colour strength but enhanced the rating of fastness properties also.     

Chemical cationization of cotton fabric for improved dye uptake

Cotton fabric is usually dyed with reactive dyes. During the dyeing process, a large amount of salt is required to achieve higher exhaustion of the dye from the dyebath onto the fiber. Dyeing of cotton with reactive dyes has a substantial environmental impact due to the discharge of a large volume of highly colored and saline effluents. Chemical cationization allows cotton fibers to be dyed without salt by chemically modifying cellulosic macromolecules to introduce positively charged sites. In this study, cotton fabric was cationized using (3-chloro-2-hydroxylpropyl) trimethyl-ammonium chloride (CHPTAC). Dye uptake was assessed using two reactive dyes, CI Reactive Blue 235 and CI Reactive Blue 19. Dye exhaustion kinetics were determined using a Datacolor-HueMetrix Monitor system. Analysis of variance demonstrated significant effects of CHPTAC concentration and exhaustion time on the percent exhaustion. Color strength at the end of the dyeing cycle was significantly higher for cationized fabrics compared to the control fabric. This work shows that treatment of cotton with CHPTAC enhanced dye uptake properties due to the introduction of cationic sites and resulted in superior dyeing without the addition of salt.     

Improvement of colour strength and colourfastness properties of gamma irradiated cotton using reactive black-5

The dyeing behaviour of gamma irradiated cotton fabric using Reactive Black-5 dye powder has been investigated. The mercerized, bleached and plain weaved cotton fabric was irradiated to different absorbed doses of 100, 200, 300, 400, 500 and 600 Gy using Co-60 gamma irradiator. Dyeing was performed using irradiated and un-irradiated cotton with dye solutions. The dyeing parameters such as temperature of dyeing, time of dyeing and pH of dyeing solutions were optimised. The colour strength values of dyed fabrics were evaluated by comparing irradiated and un-irradiated cotton in CIE Lab system using Spectra flash SF650. Methods suggested by International Standard Organisation (ISO) were employed to study the effect of gamma irradiation on the colourfastness properties of dyed fabric. It is found that gamma irradiated cotton dyed with Reactive Black-5 has not only improved the colour strength but also enhanced the rating of fastness properties.     

Preparation and properties of multi-functionalized cotton fabrics treated by extracts of gromwell and gallnut

Extracts from the root of Lithospermum erythrorhizon (gromwell) have been used for many centuries as a natural red dye and crude drugs with excellent performance for wound healing. In particular, shikonin a major constituent of the gromwell colorant is reported to possess antibacterial, antioxidant, anti-inflammatory, antitumor activities, etc. Therefore, we tried to manufacture antimicrobial and antioxidant cotton fabrics for biocompatible clothing materials using the natural stuff and environmentally friendly process. In this study, cotton fabrics were dyed with the colorant extracted from the root of gromwell, and their properties were closely investigated. Consequently, we discovered that the cotton fabrics dyed with the extracts from the root of gromwell showed excellent antioxidant performance as well as antibacterial ability. Also, the functionalities and color fastness were improved by gallnut mordanting and cationization of the cotton fabrics.     

The accessibility of cellulose as determined by dye adsorption

The accessibility of cotton cellulose was determined after it had been mercerized both in the slack and tension states. Mercerized samples were either dried or retained in the undried state before dyeing to determine their accessibilities by the adsorption of Direct Blue 1. Samples were characterized also by techniques such as moisture adsorption, water retention value (WRV) and X-ray analysis. It appeared that the crystallinity of cotton mercerized under tension was slightly increased during dyeing. Dye adsorption increased in the order nonmercerized <tension-mercerized <slack-mercerized. Products mercerized and not dried adsorbed more dye than counterparts given the same swelling treatment but dried after mercerization. The presence of dye in a sample mercerized and undried before dyeing did not affect its crystallinity. From both the dye adsorption and WRV data it was concluded that structural collapse of the fibre is greater for the slack-mercerized product than its tension-mercerized counterpart after it is dried. It was also concluded from dye adsorption and water adsorption data that about 34% of the internal surface of cotton and mercerized cotton, available for water adsorption, is inaccessible to Direct Blue 1.     

Dyeing of cotton with thyme and pomegranate peel

Application of natural dyes for textiles is increasing due to awareness of environment, ecology, and pollution control. The purpose of this study is to determine the color, antimicrobial, and fastness properties of cotton fabrics dyed with thyme and pomegranate peel without a mordanting process. In this way, it was planned to avoid use of metallic mordants (heavy-metal salts) and prevent heavy-metal pollution for ecological production. Additionally, a variety of the most commonly used mordants, namely potassium aluminum sulfate, copper(II) sulfate, iron(II) sulfate, and tin(II) chloride, were used for mordanting of cotton fabrics in order to compare the differently mordanted and unmordanted dyed fabrics’ color efficiencies (K/S) and CIE L ^* a ^* b ^* color values. It was found that mordant type had an effect on color efficiency and the color coordinates of fabrics dyed with both thyme and pomegranate fruit peel. Moreover, the antimicrobial properties of the fabrics only dyed directly with thyme and pomegranate peel without any mordanting process were determined to demonstrate the usability of these natural dye sources without use of any mordanting agents. The obtained antimicrobial activities were compared with undyed samples. Undyed samples showed no antimicrobial activity, whereas significant antimicrobial activity was obtained after the dyeing procedure using thyme and pomegranate peel on unmordanted fabrics. Washing, rubbing, perspiration, and lightfastness properties of dyed fabrics were also evaluated. Thyme and pomegranate fruit peel as natural dye sources revealed sufficient results even for unmordanted samples.     

Synthesis and characterization of reactive dyes based on 2-phenyl-3-[4′-(4″-aminophenylsulphonamido)]phenyl-4(3H)-quinazolinone-6-sulphonic acid

A series of new quinazolinone based mono azo reactive dyes (D_1–10) have been prepared by subsequent diazotization of 2-phenyl-3-[4′-(4″-aminophenylsulphonamido)]phenyl-4(3H)-quinazolinone-6-sulphonic acid (C) and coupling with various 4-chloro anilino cyanurated coupling components. These dyes give purple, red, orange and yellow color shades. All the reactive dyes were characterized by their percentage yield, UV–Vis spectroscopy, elemental analysis, IR spectroscopy, ¹H NMR spectroscopy and dyeing performance on silk, wool and cotton fibres. The percentage dye bath exhaustion on different fibres has been found to be reasonably good and acceptable. The dyed fibres show moderate to very good light fastness and good to excellent washing and rubbing fastness.     

Disperse dyes derived from 2-amino-5-mercapto-1,3,4-thiadiazole

Some novel heterocyclic monoazo dyes based on 2-amino-5-mercapto-1,3,4-thiadizole have been synthesized by coupling with various N-phenylacrylamide derivatives. The dyeing performance of these dyes was assessed on polyester fabrics. IR and visible spectra of the dyes were examined. The percentage dye bath exhaustion, fixation, and various fastness properties of the dyes were also determined. These dyes were found to give brownish-orange to reddish-pink shades on dyeing with good depth, levelness, and brightness on fabric. The dyed fabric showed a good to excellent fastness to washing, rubbing, perspiration, and sublimation.     

Anthraquinone and Azo Dyes in Dyeing Processes of PET Films and PET Knitted Fabrics Using Supercritical CO2 Medium

Summary: Dyeing processes using supercritical fluid present advantages over the conventional dyeing process using aqueous medium. Previous works from our group on polymeric fibers such as N,N-dimethylacrylamide (DMAAm) modified poly(ethylene terephthalate), PET, showed higher sorption of disperse dyes in supercritical medium. Furthermore, recent studies showed that the association of UV radiation and DMAAm treatment leads to a better incorporation of dyes in modified PET soaked in aqueous medium. In this work, modified and non-modified PET knitted fabrics (KF) were dyed in supercritical CO₂ medium. Azo and anthraquinone dyes were used in order to compare the extent of incorporated dye in PET films and PET KF in supercritical CO₂. The dyeing process variables were studied by factorial design and by a response surface methodology (RSM) technique. The anthraquinone dye presented a better incorporation in PET than the azo dye. The UV light exposure and the dyeing times inputs showed positive main effects in the incorporation of dyes in PET films and PET KF. From the RSM data, DMAAm and UV light modified PET KF presented 7.43 mg of incorporated azo dye by g of PET if the optimized dyeing conditions, time: 135 min and pressure: 212 bar would be used. In the respective optimized dyeing conditions for the anthraquinone dye, time 150 min and pressure 229 bar, the incorporated dye would be 22.9 mg of dye by g of PET.     

Synthesis,characterization and dyeing assessment of novel acid azo dyes and mordent acid azo dyes based on 2-hydroxy-4-methoxybenzophenone-5-sulfonic acid on wool and silk fabrics

Novel acid mono azo and mordent acid mono azo dyes were synthesized by the coupling of diazonium salt solution of different aromatic amines with 2-hydroxy-4-methoxybenzophenone-5-sulfonic acid. The resulting dyes were characterized by spectral techniques like elemental analysis, IR, ¹H-NMR and UV visible spectroscopy. The dyeing performance of all the dyes was evaluated on wool and silk fabrics. The dyeing of chrome pre-treated wool and silk fabrics showed better hues on mordented fabrics. Dyeing of wool and silk fabrics resulted in pinkish blue to red shades with very good depth and levelness. The dyed fabrics showed excellent to very good light, washing, perspiration, sublimation and rubbing fastness.     

Synthesis and application of disazo reactive dyes derived from sulfatoethylsulfone pyrazolo[1,5-a]pyrimidine derivatives

Two models of heterocyclic reactive dyes based on disazo pyrazoloprymidine derivatives and possessing a sulfatoethylsulfone reactive group were synthesized and characterized by elemental analysis, IR and ¹H NMR spectroscopy. The dyes were applied to cotton, wool and silk fabrics. Effects of varying dyeing conditions were investigated. The results assessed for the exhaust dyeing methods on the different fabrics indicate that these reactive dyes showed high exhaustion and fixation values. The dyed fabrics also showed very good light fastness and good to excellent washing, rubbing and perspiration fastness.     

分散染料染色法制备的彩色聚(苯乙烯-丙烯酸)纳米球

在低于聚合物纳米球玻璃化转变温度(110.69 ℃)的条件下,用两种分散染料对聚(苯乙烯-丙烯酸)[P(St-co-AA)]纳米球染色,研究了染色温度(75~95 ℃)和染料用量(1%~5%)对纳米球上染料吸附量的影响。 结果表明,染色温度越高,分散染料用量越大,所得到聚合物纳米球的颜色越深越鲜艳。 分子结构中氨基和羟基数量多的分散蓝2BLN在纳米球上的吸附量低于相同染料用量时分散红FB的吸附量。 经过染色后纳米球的表面变得很粗糙,粒径增加23 nm。 用彩色纳米球对经过阳离子化处理的棉织物进行染色,利用很少量的彩色纳米球,就可以使织物获得较深且鲜艳的颜色。     

Eco-dyeing using Tamarindus indica L. seed coat tannin as a natural mordant for textiles with antibacterial activity

Tamarind seed coat tannin was extracted and its tannin class was determined. The extracted tannin was employed as a natural mordant alone and in combination with metal mordant namely copper sulphate for cotton, wool and silk fabrics and dyed using natural dyes namely turmeric and pomegranate rind. The colour strength, colour coordinates, wash and light fastness were evaluated and compared for all the three fabrics with and without mordanting. The pre-mordanted fabrics on dyeing gave better colour strength, wash and light fastness than those dyeing obtained without mordanting. The total phenolic content of the extract was calculated and minimum inhibition concentration was 1% against both the Staphylococcus aureus and Escherichia coli bacteria. The mordanted and dyed fabrics resulted in good antibacterial activity up to 20 washes, when natural mordant was used along with 0.5% and 1% copper sulphate mordant and dyed with natural dyes.     

Synthesis and dyeing properties of new disazo disperse dyes for polyester and nylon fabrics

Diazotized aryl amines were coupled with two stenhouse salt namely, N-(5-phenylamino-penta-4-ol-2,4-diene-1-ylidene)anilines hydrochloride [S₁ (RH) or S₂ (ROH)] to furnish two series of disazo disperse dyes (S₁D_1–10 and S₂D_1–10). The structure of all the dyes was established by estimating number of azo groups, elemental analysis and spectral studies (IR, ¹H-NMR, UV/Visible). The structure–property relationship was discussed by using electronic absorption spectra of the dyes. These dyes were applied to polyester and nylon fabrics as disperse dyes by using temperature exhaust dyeing method. The relevant dyeing characteristics, such as dyeability on fabrics, wash-fastness and light-fastness were evaluated. Fabrics dyed with these dyes furnished generally deep and bright intense hues ranging from light yellow to orange to reddish brown. The color fastness of the dyed fabric was assessed by determining wash-fastness and light-fastness properties.     

Production,Partial Characterization,and Use of a Red Biochrome Produced by <Emphasis Type="Italic">Serratia sakuensis</Emphasis> subsp. nov Strain KRED for Dyeing Natural Fibers

We have described a novel red biochrome, 514 Da in size, produced by solid-state cultivation of a bacterial isolate obtained from garden soil. The growth requirements of the isolate, the chemical characteristics of the biochrome produced, and the application of the biochrome in dying of silk, wool, and cotton fabrics have been studied. The biochrome obtained after 52 h of incubation and having a λ _max of 535 nm was used for dyeing the fabrics. We found that silk, wool, and cotton fabrics dyed with this new natural red compound have high color strength values and dye uptake along with good color fastness as well as antibacterial activity.     

Influence of gamma radiation on the colour strength and fastness properties of fabric using turmeric (Curcuma longa L.) as natural dye

The effect of gamma radiation on the dyeing of cotton with extract of turmeric (Curcuma longa L.) powder has been investigated. Cotton fabric and turmeric powder were irradiated to absorbed doses of 1, 2, 3, 4 and 6 kGy using Co-60 gamma irradiator. Dyeing parameters such as temperature, pH and mordant concentration were optimized. Dyeing was performed using un-irradiated and irradiated cotton with the extracts of un-irradiated and irradiated turmeric powder in order to investigate the effect of radiation treatment on the colour strength of dyed fabric. The reported data of un-irradiated and irradiated fabrics dyed with un-irradiated and irradiated dyes were obtained using the spectraflash SF-650. The colourfastness to light, rubbing- and washing-fastness properties showed that gamma irradiation has improved the dyeing characteristics from fair to good.     

Synthesis of Some New Thiazolo[3,2‐a]pyrimidine Derivatives and Their Applications as Disperse Dyes

A series of novel thiazolo[3,2‐a]pyrimidine derivatives were synthesized by using β‐ketoanilides 1a–c as starting materials and as key intermediates for preparation of new pyrimidinecompounds 3a–e and fused heterocyclic pyrimidine derivatives 5a–c . The new compounds were transformed to disperse dyes 6a,b and 7 . The chemical structures were elucidated by spectroscopic and elemental analyses and found to be in good agreement with the proposed structures. The versatility of compounds 6a,b and 7 for textile dyeing as disperse dyes was reported. The synthesized dyes were applied to polyester fabrics by using high temperature dyeing method at 120°C. The dye uptake expressed as color strength (k/s) of the dyed samples has been measured. Moreover, the color strength was examined in detail. In addition, the position of color in CIELAB coordinates (L*, a*, b*, h, and C*) was assessed. The color fastness of the dyed samples gave excellent results for washing and rubbing; however, the light fastness was moderate. Raman spectra of dyed samples unequivocally excluded ring dyeing and found to match with the proposed structures.     

A simple method for determining the total amount of physically and chemically bound water of different cements

A novel environmentally friendly flame-retardant compound, diethyl 3-(triethoxysilanepropyl) phosphoramidate (DTP) was synthesized via a simple one-step procedure with good yield and characterized by FT-IR and ¹H-NMR, ³¹P-NMR and ²⁹Si-NMR. The synthesized compound was coated onto cotton fabrics with different levels of add-ons (5–17 mass%) using the traditional pad-dry-cure method. SEM and XPS were conducted to characterize the surfaces of the coated cotton fabrics. The XPS results showed that DTP was attached to cotton through covalent bond. Cone calorimeter test showed that the cotton fabric treated with DTP became less flammable due to the lower HRR, THR and CO₂/CO ratio. The modified cotton fabrics exhibited efficient flame retardancy, which was evidenced by limiting oxygen index (LOI) and vertical flammability test. Cotton fabrics treated with DTP in 5–17 mass% add-ons had high LOI values of 23–32%. Thermogravimetric analysis results show that the usage of DTP promotes degradation of the cotton fabrics and catalyzes its char formation.     

Investigation of the dyeing properties of cotton fabrics and wool yarns using Prunus persica leaf extract

In this study, the dyeing properties of cellulose fabric and wool yarn were investigated using Prunus persica (Peach) leaf extracts. For this concept, the cotton fabrics and wool yarns were subjected to pre–, meta– and post– mordanting processes in the presence of FeSO₄, CuSO₄ and AlK(SO₄)₂ mordants. The studies were carried out using medium pH. Color analyses of the dyed samples were done and the results were evaluated in terms of wash, rubbing and light fastness values. The color codes were determined with Pantone Color Quide, and K/S and L1 a1 b1 values were detected with color measurement spectrophotometer, and also washing–, crocking– fastness levels were evaluated using gray scale. As a result, it was detected that wool yarns exhibited better dyeing potential than cotton fabrics and highest color strength values were obtained using pre–mordanting method. For wool yarns, high color strength were achieved in the presence of AlK(SO₄)₂ mordant.