Topochemical acetylation of cellulose nanopaper structures for biocomposites: mechanisms for reduced water vapour sorption

Moisture sorption decreases dimensional stability and mechanical properties of polymer matrix biocomposites based on plant fibers. Cellulose nanofiber reinforcement may offer advantages in this respect. Here, wood-based nanofibrillated cellulose (NFC) and bacterial cellulose (BC) nanopaper structures, with different specific surface area (SSA), ranging from 0.03 to 173.3 m²/g, were topochemically acetylated and characterized by ATR-FTIR, XRD, solid-state CP/MAS ¹³C-NMR and moisture sorption studies. Polymer matrix nanocomposites based on NFC were also prepared as demonstrators. The surface degree of substitution (surface-DS) of the acetylated cellulose nanofibers is a key parameter, which increased with increasing SSA. Successful topochemical acetylation was confirmed and significantly reduced the moisture sorption in nanopaper structures, especially at RH = 53 %. BC nanopaper sorbed less moisture than the NFC counterpart, and mechanisms are discussed. Topochemical NFC nanopaper acetylation can be used to prepare moisture-stable nanocellulose biocomposites.     

High strength modified nanofibrillated cellulose-polyvinyl alcohol films

In this study surface-modified nanofibrillated cellulose (NFC) was used at low levels (0.5 to1.5 wt%) as a reinforcement in a polyvinyl alcohol (PVA) matrix. The modified-NFC–PVA composite films prepared using the solution casting technique showed improved mechanical performance. Birch pulp cellulose was initially modified by allylation using a solvent-free, dry modification method followed by subsequent epoxidation of the allyl groups and finally grinding the pulp to yield epoxy-NFC. In order to obtain optimal mechanical performance, epoxy-NFC with different degrees of substitution was evaluated in the reinforcement of PVA. The addition of 1 wt% epoxy-NFC (degree of substitution, DS 0.07) enhanced the modulus, strength, and strain of pure PVA film by 307, 139 and 23 %, respectively, thus producing the best performing film. The results demonstrate the favourable effect of chemically functionalized NFC on the mechanical properties of polyvinyl alcohol compared to unmodified NFC as reinforcement. In order to improve industrial and economic feasibility, the manufacture of the composite was also done in situ by grinding cellulose directly in PVA to produce the new biocomposite in a one-step process.     

Extensional rheology of cellulose/NaOH/urea/H<Subscript>2</Subscript>O solutions

The extensional flow behaviors of cellulose/NaOH/urea/H₂O solution were investigated by using capillary breakup extensional rheometry (CaBER). The effects of temperature, storage time and cellulose concentrations on both the storage modulus G′ and the loss modulus G″ were also analyzed. For 2 wt% cellulose solution, the G′, G″ and filament lifetime remained unchanged after long storage time. While, for 4 wt% cellulose solution, physical gels could form at either higher temperature or for longer storage time, and the filament lifetime, the relaxation time (λ _e ) and the initial extensional viscosity (η _e0) first increased and then decreased with increase of the storage time. The transition points of the filament lifetime shifted to lower storage time with the increase of the temperature. The η _e0 is proportional to λ _e . The results presented suggest that the extensional properties of the cellulose/NaOH/urea/H₂O solution first increase and then decrease during the gelation process, and the spinning time, which decreases linearly with the increase in the storage temperature, must be controlled below the time that η _e0 starts to decrease.     

Viscoelasticity and rheology in the regimes from dilute to concentrated in cellulose 1-ethyl-3-methylimidazolium acetate solutions

Dynamic rheological behaviors of α-cellulose 1-ethyl-3-methylimidazolium acetate ([Emim]Ac) solutions were investigated in a large range of concentrations (0.1–10 wt %) at 25 °C. On the basis of data from the dynamic viscoelastic test, the exponents of the specific viscosity η _sp versus concentration c were determined as 1.0, 2.0 and 4.7 for dilute, semidilute unentangled and entangled regimes respectively, which were in accordance with the scaling prediction for neutral polymer in θ solvent. The intrinsic viscosity [η] of the solution was determined to be 253 mL/g at 25 °C. The linear viscoelastic response of the dilute and semidilute unentangled solutions could be described successfully by the Zimm and Rouse model (ν = 0.5 for θ solution) respectively, suggesting that the motion of cellulose chain in [Emim]Ac changed from Zimm to Rouse model with increasing concentration. At low concentrations, failure of the Cox–Merz rule with steady shear viscosity larger than complex viscosity was observed. While as the concentration increased, the deviation from the Cox–Merz rule disappeared due to the formation of homogeneous entanglement structure in cellulose solution.     

From paper to nanopaper: evolution of mechanical and physical properties

In the present work the evolution of physical and mechanical properties of papers and nanopapers is studied. Handsheets made of eucalyptus fibres reinforced with 0, 25, 50, 75 and 100 wt% of nanofibrillated cellulose (NFC) content were fabricated using a Rapid Köthen-like equipment. The obtained papers and nanopapers were physical- and mechanically-characterized. The results showed a significant increase in density and a reduction of porosity in the samples during their transition from paper to nanopaper; besides, nanopapers were more transparent and smoother than normal papers. These physical changes where more evident with increasing amounts of NFC. Regarding mechanical properties, nanopapers with a 100 wt% content of NFC improved their strength and rigidity in 228 and 317 %, respectively, in comparison with normal papers. The evolution of strength and rigidity from paper to nanopaper was linear in relation to the amount of NFC, which means that the ultimate tensile strength was mainly dependant on nanofibril failure.     

Prediction of elastic properties of nanofibrillated cellulose from micromechanical modeling and nano-structure characterization by transmission electron microscopy

Cellulose-based materials have a great potential in terms of mechanical performance, since crystalline cellulose is known to have excellent stiffness along the main axis. This potential is not completely fulfilled in structural wood materials and in composite materials, due to structural inhomogeneities, misalignment, voids etc. on several length scales. This study investigates the difference in stiffness of nanofibrillated cellulose (NFC) compared to that of cellulose crystallites, based on nanostructural characterization, image analysis and micromechanical modeling. Nanofibrillated cellulose is believed to be composed of a distribution of crystallites in an amorphous matrix, and it is assumed to represent the distribution of the crystalline allomorph I_β. To predict the elastic properties of NFC, a micromechanical model based on a Mori–Tanaka approach and self-consistent scheme was used. The input data, i.e. orientation distribution, aspect ratio and volume fraction of these crystalline regions, were estimated from image analysis of transmission electron micrographs. The model predicts a ca. 56 % loss of stiffness of NFC compared to that of cellulose crystals along the main axis.     

Electrostatic assembly of Ag nanoparticles onto nanofibrillated cellulose for antibacterial paper products

Nanofibrillated cellulose offers new technological solutions for the development of paper products. Here, composites of nanofibrillated cellulose (NFC) and Ag nanoparticles (NP) were prepared for the first time via the electrostatic assembly of Ag NP (aqueous colloids) onto NFC. Distinct polyelectrolytes have been investigated as macromolecular linkers in order to evaluate their effects on the building-up of Ag modified NFC and also on the final properties of the NFC/Ag composite materials. The NFC/Ag nanocomposites were first investigated for their antibacterial properties towards S. aureus and K. pneumoniae microorganisms as compared to NFC modified by polyelectrolytes linkers without Ag. Subsequently, the antibacterial NFC/Ag nanocomposites were used as fillers in starch based coating formulations for Eucalyptus globulus-based paper sheets. The potential of this approach to produce antimicrobial paper products will be discussed on the basis of complementary optical, air barrier and mechanical data.     

Anisotropy of the elastic properties of crystalline cellulose Iβ from first principles density functional theory with Van der Waals interactions

In spite of the significant potential of cellulose nanocrystals as functional nanoparticles for numerous applications, a fundamental understanding of the mechanical properties of defect-free, crystalline cellulose is still lacking. In this paper, the elasticity matrix for cellulose I_β with hydrogen bonding network A was calculated using ab initio density functional theory with a semi-empirical correction for van der Waals interactions. The computed Young’s modulus is found to be 206 GPa along [001] (c-axis), 98 GPa along [010] (b-axis), and 19 GPa along [100] (a-axis). Full compliance matrices are reported for 1.0, 1.5 and 2.0 % applied strains Color contour surfaces that show variations of the Young’s modulus and average Poisson’s ratio with crystallographic direction revealed the extreme anisotropies of these important mechanical properties. The sensitivity of the elastic parameters to misalignments in the crystal were examined with 2D polar plots within selected planes containing specific bonding characteristics; these are used to explain the substantial variability in the reported experimental Young’s moduli values. Results for the lattice directions [001], [010] and [100] are within the range of reported experimental and other numerical values.     

Nanofibrillated cellulose (NFC) reinforced polyvinyl alcohol (PVOH) nanocomposites: properties, solubility of carbon dioxide, and foaming

Polyvinyl alcohol (PVOH) and its nanofibrillated cellulose (NFC) reinforced nanocomposites were produced and foamed and its properties—such as the dynamic mechanical properties, crystallization behavior, and solubility of carbon dioxide (CO₂)—were evaluated. PVOH was mixed with an NFC fiber suspension in water followed by casting. Transmission electron microscopy (TEM) images, as well as the optical transparency of the films, revealed that the NFC fibers dispersed well in the resulting PVOH/NFC nanocomposites. Adding NFC increased the tensile modulus of the PVOH/NFC nanocomposites nearly threefold. Differential scanning calorimetry (DSC) analysis showed that the NFC served as a nucleating agent, promoting the early onset of crystallization. However, high NFC content also led to greater thermal degradation of the PVOH matrix. PVOH/NFC nanocomposites were sensitive to moisture content and dynamic mechanical analysis (DMA) tests showed that, at room temperature, the storage modulus increased with decreasing moisture content. The solubility of CO₂ in the PVOH/NFC nanocomposites depended on their moisture content and decreased with the addition of NFC. Moreover, the desorption diffusivity increased as more NFC was added. Finally, the foaming behavior of the PVOH/NFC nanocomposites was studied using CO₂ and/or water as the physical foaming agent(s) in a batch foaming process. Only samples with a high moisture content were able to foam with CO₂. Furthermore, the PVOH/NFC nanocomposites exhibited finer and more anisotropic cell morphologies than the neat PVOH films. In the absence of moisture, no foaming was observed in the CO₂-saturated neat PVOH or PVOH/NFC nanocomposite samples.     

Synthesis of homologously pure bacteriochlorophyll-e and f analogues from BChls-c/d via transformation of the 7-methyl to formyl group and self-aggregation of synthetic zinc methyl bacteriopheophorbides-c/d/e/f in non-polar organic solvent

Homologously pure methyl bacteriopheophorbides-e and f (BPhes-e/f_M) were prepared from modification of naturally occurring bacteriochlorophylls-c and d (BChls-c/d), respectively, by transformation of the methyl to formyl group at the 7-position. The absolute configuration of the 1-hydroxyethyl group at the 3-position of (Zn-)BPhes-e/f_M was determined from comparison with structurally known BChl-c/d epimers. Visible spectra of synthetic (Zn-)BPhe-c/d/e/f_M showed that the 7¹-oxidation and the 8²/12¹/20-methylation affected Soret, Q_x and Q_y bands of both the monomeric (in a polar organic solvent) and oligomeric species (in a non-polar solvent).     

Cellulose/iron oxide hybrids as multifunctional pigments in thermoplastic starch based materials

Cellulose/iron oxide hybrids were prepared by the controlled hydrolysis of FeC₂O₄ in the presence of vegetable and bacterial cellulose fibres as substrates. By varying the relative amount of FeC₂O₄ and NaOH, either hematite or magnetic iron oxides were grown at the cellulose fibres surfaces. This chemical strategy was used for the production of a number of materials, whose coloristic properties associated to their reinforcement role allowed their use as new hybrid pigments for thermoplastic starch (TPS) based products. The TPS reinforced materials were characterized by several techniques in order to evaluate: the morphology and the compatibility between the matrix and the fillers; the mechanical reinforcement effect of the cellulose/iron oxide pigments on TPS and the coloristic properties of the composites. All materials showed good dispersion and strong adhesion for the cellulose/iron oxide nanocomposites in the TPS matrix thus resulting in improved mechanical properties.     

Thermal properties of biocomposites

Thermal properties of new biocomposites prepared from modified starch matrix reinforced with natural vegetable fibres were studied. DSC and TG methods were applied to study thermal behaviour of biocomposites. Biocomposites were obtained in the laboratory twin-screw extruder. Two kinds of natural fibres were used, i.e. flax and cellulose in the amount of 0–40 mass%. DSC curves of biocomposites reveal glass transition temperature, attributed to the amorphous nature of the plasticized starch matrix. In general, incorporating natural fibres into modified starch matrix leads to an increase in glass transition temperature. Thermal degradation of modified starch matrix and cellulose reinforced biocomposites proceeds in three steps, whereas the degradation process of flax reinforced biocomposites occurs in two steps. For unreinforced matrix as well as for all biocomposites, regardless of type and amount of reinforcement, the major mass loss is observed at the temperature above 300°C. The increase in thermal stability with introduction of natural fibre is observed for both flax and cellulose reinforced biocomposites.     

Trimethylaluminum mediated halomethylation of [(arene)2Fe]2+ cations

The arene salts [(arene)₂Fe](PF₆)₂ (arene = mesitylene 1a, and hexamethylbenzene, 1c) react readily with AlMe₃ in dichloromethane or dibromomethane to produce the novel exo-halomethyl-η⁵-cyclohexadienyl salts [(η⁵-exo-CH₂XC₆H₃Me₃)(η⁶-C₆H₃Me₃)Fe]PF₆ (X = Cl, 2d; X = Br, 2e) and [(η⁵-exo-CH₂XC₆Me₆)(η⁶-C₆Me₆)Fe]PF₆ (X = Cl, 2f; X = Br, 2g) which have been characterized spectroscopically and, in the case of 2f, crystallographically.     

Polymeric biocomposites of poly (butylene adipate-co-terephthalate) reinforced with natural Munguba fibers

In this work, polymeric biocomposites of poly (butylene adipate-co-terephthalate), PBAT, were reinforced with Munguba fibers (Pseudobombax munguba). This tree is found in great abundance in the marshy areas of the Amazon forest. The motivation for using this fiber in polymer composites comes from the fact that although research for this fiber has not been reported in the scientific literature, it is commonly used by the local population because its bark is strong and flexible. Most important is that the extraction of Munguba fibers does not damage the supplier tree because as it is extracted from the bark, its regeneration starts as it is removed. The fibers were chemically treated by mercerization/acetylation and evaluated by Fourier transform infrared spectroscopy, thermogravimetric analysis and tensile tests. The Munguba fiber presented mechanical properties similar to those of other natural fibers traditionally used in composites, and the chemical treatment provided improvements of its thermal stability and stiffness. The biocomposites showed a better elastic modulus in relation to the pure PBAT. The addition of fibers caused changes in the T _g, T _m and T _c of PBAT as observed by differential scanning calorimetry analysis. The Russel, Halpin-Tsai and Maxwell models were employed to provide the theoretical elastic modulus of the biocomposites.     

Thermal characterization and electrical properties of Fe-modified cellulose long fibers and micro crystalline cellulose

Thermal properties of polylactic acid (PLA) filled with Fe-modified cellulose long fibers (CLF) and microcrystalline cellulose (MCC) were studied using thermo gravimetric analysis (TG), differential scanning calorimetry, and dynamic mechanical analysis (DMA). The Fe-modified CLFs and MCCs were compared with unmodified samples to study the effect of modification with Fe on electrical conductivity. Results from TG showed that the degradation temperature was higher for all composites when compared to the pure PLA and that the PLA composites filled with unmodified celluloses resulted in the best thermal stability. No comparable difference was found in glass transition temperature (T _g) and melting temperature (T _m) between pure PLA and Fe-modified and unmodified CLF- and MCC-based PLA biocomposites. DMA results showed that the storage modulus in glassy state was increased for the biocomposites when compared to pure PLA. The results obtained from a femtostat showed that electrical conductivity of Fe-modified CLF and MCC samples were higher than that of unmodified samples, thus indicating that the prepared biocomposites have potential uses where conductive biopolymers are needed. These modified fibers can also be tailored for fiber orientation in a matrix when subjected to a magnetic field.     

Nanofibrillated cellulose/nanographite composite films

Though research into nanofibrillated cellulose (NFC) has recently increased, few studies have considered co-utilising NFC and nanographite (NG) in composite films, and, it has, however been a challenge to use high-yield pulp fibres (mechanical pulps) to produce this nanofibrillar material. It is worth noting that there is a significant difference between chemical pulp fibres and high-yield pulp fibres, as the former is composed mainly of cellulose and has a yield of approximately 50 % while the latter is consist of cellulose, hemicellulose and lignin, and has a yield of approximately 90 %. NFC was produced by combining TEMPO (2,2,6,6-tetramethypiperidine-1-oxyl)-mediated oxidation with the mechanical shearing of chemi-thermomechanical pulp (CTMP) and sulphite pulp (SP); the NG was produced by mechanically exfoliating graphite. The different NaClO dosages in the TEMPO system differently oxidised the fibres, altering their fibrillation efficiency. NFC–NG films were produced by casting in a Petri dish. We examine the effect of NG on the sheet-resistance and mechanical properties of NFC films. Addition of 10 wt% NG to 90 wt% NFC of sample CC2 (5 mmol NaClO CTMP-NFC homogenised for 60 min) improved the sheet resistance, i.e. from that of an insulating pure NFC film to 180 Ω/sq. Further addition of 20 (CC3) and 25 wt% (CC4) of NG to 80 and 75 wt% respectively, lowered the sheet resistance to 17 and 9 Ω/sq, respectively. For the mechanical properties, we found that adding 10 wt% NG to 90 wt% NFC of sample HH2 (5 mmol NaClO SP-NFC homogenised for 60 min) improved the tensile index by 28 %, tensile stiffness index by 20 %, and peak load by 28 %. The film’s surface morphology was visualised using scanning electron microscopy, revealing the fibrillated structure of NFC and NG. This methodology yields NFC–NG films that are mechanically stable, bendable, and flexible.     

Dual-functional chitosan–methylisothiazolinone/microfibrillated cellulose biocomposites for enhancing antibacterial and mechanical properties of agar films

In order to enhance the antibacterial and mechanical properties of agar films, the chitosan-methylisothiazolinone (C–MIT) complex was first prepared by the ionic gelation method, and the characterization of the C–MIT complex was carried out by Fourier transform infrared spectroscopy, transmission electron microscopy, and Thermo gravimetry. Chitosan was successfully crosslinked with tripolyphosphate for the nanoencapsulation of methylisothiazolinone, and the C–MIT complex was spherical in shape with a diameter of about 10 nm. The C–MIT/MFC biocomposites obtained through the adsorption of the C–MIT complex on the microfibrillated cellulose (MFC) was then incorporated into the agar films. In comparison with the pure agar films, the tensile strength of the agar composite films was increased by about 19 % at the loading of 10 wt% of C–MIT/MFC biocomposites, and antibacterial tests demonstrated that the agar composite films exhibited remarkable antibacterial activities against both Escherichia coli and Staphylococcus aureus. This work provides a new approach to utilizing multifunctional agar films in the medical field.     

Biocomposites of plasticized starch reinforced with cellulose crystallites from cottonseed linter

Environmentally friendly starch biocomposites were successfully developed using a colloidal suspension of cottonseed linter cellulose crystallite as a filler to reinforce glycerol plasticized starch (PS). The cellulose crystallites, having lengths of 350 +/- 70 nm and diameters of 40 +/- 8 nm on average, were prepared from cottonseed linters by acid hydrolysis. The dependence of morphology and properties of the PS-based biocomposites on cellulose crystallites content in the range from 0 to 30 wt.-% was investigated by scanning electron microscopy, differential scanning thermal analysis, dynamic mechanical thermal analysis, and measurements of mechanical properties and water absorption. The results indicate that the strong interactions between fillers and between the filler and PS matrix play a key role in reinforcing the resulting composites. The PS/cellulose crystallite composites, conditioned at 50% relative humidity, undergo an increase in both tensile strength and Young's modulus from 2.5 MPa for PS film to 7.8 MPa and from 36 MPa for PS film to 301 MPa. Further, incorporating cottonseed linter cellulose crystallites into PS matrix leads to an improvement in water resistance for the resulting biocomposites. The mechanical behaviors of the starch-based biocomposites as a function of cellulose crystallites content.     

Comparison of nano- and microfibrillated cellulose films

Nanocellulose is an interesting building block for functional materials and has gained considerable interest due to its mechanical robustness, large surface area and biodegradability. It can be formed into various structures such as solids, films and gels such as hydrogels and aerogels and combined with polymers or other materials to form composites. Mechanical, optical and barrier properties of nanofibrillated cellulose (NFC) and microfibrillated cellulose (MFC) films were studied in order to understand their potential for packaging and functional printing applications. Impact of raw material choice and nanocellulose production process on these properties was evaluated. MFC and NFC were produced following two different routes. NFC was produced using a chemical pretreatment followed by a high pressure homogenization, whereas MFC was produced using a mechanical treatment only. TEMPO-mediated oxidation followed by one step of high pressure (2,000 bar) homogenization seems to produce a similar type of NFC from both hardwood and softwood. NFC films showed superior mechanical and optical properties compared with MFC films; however, MFC films demonstrated better barrier properties against oxygen and water vapor. Both the MFC and NFC films were excellent barriers against mineral oil used in ordinary printing inks and dichlorobenzene, a common solvent used in functional printing inks. Barrier properties against vegetable oil were also found to be exceptionally good for both the NFC and MFC films.     

Reactivity studies of (η-arene)ruthenium dimeric complexes towards pyrazoles: isolation of amidines, bis pyrazoles and chloro bridged pyrazole complexes

The complex [(η⁶-p-cymene)Ru(μ-Cl)Cl]₂1 reacts with pyrazole ligands (3a-g) in acetonitrile to afford the amidine derivatives of the type [(η⁶-p-cymene)Ru(L)(3,5-HRR′pz)](BF4)₂ (4a-f), where L = {HNC(Me)3,5-RR′pz}; R, R′ = H (4a); H, CH₃ (4b); C₆H₅ (4c); CH₃, C₆H₅ (4d) OCH₃ (4e); and OC₂H₅ (4f), respectively. The ligand L is generated in situ through the condensation of 3,5-HRR′pz with acetonitrile under the influence of [(η⁶-p-cymene)RuCl₂]₂. The complex [(η⁶-C₆Me₆)Ru(μ-Cl)Cl]₂2 reacts with pyrazole ligands in acetonitrile to yield bis-pyrazole derivatives such as [(η⁶-C₆Me₆)Ru (3,5-HRR′pz)₂Cl](BF₄) (5a-b), where R, R′ = H (5a); H, CH₃ (5b), as well as dimeric complexes of pyrazole substituted chloro bridged derivatives [{(η⁶-C₆Me₆)Ru(μ-Cl) (3,5-HRR′pz)}₂](BF₄)₂ (5c-g), where R, R′ = CH₃ (5c); C₆H₅ (5d); CH₃, C₆H₅ (5e); OCH₃ (5f); and OC₂H₅ (5g), respectively. These complexes were characterized by FT-IR and FT-NMR spectroscopy as well as analytical data. The molecular structures¹ of representative complexes [(η⁶-C₆Me₆)Ru{3(5)-Hmpz}₂Cl]⁺5b, [(η⁶-C₆Me₆)Ru(μ-Cl)(3,5-Hdmpz)]₂²⁺5c and [(η⁶-C₆Me₆)Ru(μ-Cl){3(5)Me,5(3)Ph-Hpz}]₂²⁺5e were established by single crystal X-ray diffraction studies.