Design and gamma-scintigraphic evaluation of a floating and pulsatile drug delivery system based on an impermeable cylinder

A blend of floating and pulsatile principles of drug delivery system seems to present the advantage that a drug can be released in the upper GI tract after a definite time period of no drug release. The objective of this study was to develop and evaluate a floating and pulsatile drug delivery system based on an impermeable cylinder. Pulsatile capsule was prepared by sealing the drug tablet and the buoyant material filler inside the impermeable capsule body with erodible plug. The drug delivery system showed typical floating and pulsatile release profile with a lag time followed by a rapid release phase. The lag time prior to the pulsatile drug release correlated well with the erosion properties of plugs and the composition of the plug could be controlled by the weight of the plug. The buoyancy of the whole system depended on the bulk density of the dosage form. Gamma-scintigraphic evaluation in humans was used to establish methodology capable of showing the subsequent in vivo performance of the floating and pulsatile release capsule. Developed formulations showed instantaneous floating with no drug release during the lag time followed by a pulse drug release. From the gamma-scintigraphic results, the pulsatile release capsule we prepared could achieve a rapid release after lag time in vivo, which was longer than that in vitro. The scintigraphic evaluation could confirm qualitatively that the system with in vitro lag time of 4.0 h provided, with relatively high reproducibility, a pulsatile release occurred around 5.0 h after administration.     

Relationship between diffusivity of water molecules inside hydrating tablets and their drug release behavior elucidated by magnetic resonance imaging

We reported previously that sustained release matrix tablets showed zero-order drug release without being affected by pH change. To understand drug release mechanisms more fully, we monitored the swelling and erosion of hydrating tablets using magnetic resonance imaging (MRI). Three different types of tablets comprised of polyion complex-forming materials and a hydroxypropyl methylcellulose (HPMC) were used. Proton density- and diffusion-weighted images of the hydrating tablets were acquired at intervals. Furthermore, apparent self-diffusion coefficient maps were generated from diffusion-weighted imaging to evaluate the state of hydrating tablets. Our findings indicated that water penetration into polyion complex tablets was faster than that into HPMC matrix tablets. In polyion complex tablets, water molecules were dispersed homogeneously and their diffusivity was relatively high, whereas in HPMC matrix tablets, water molecule movement was tightly restricted within the gel. An optimal tablet formulation determined in a previous study had water molecule penetration and diffusivity properties that appeared intermediate to those of polyion complex and HPMC matrix tablets; water molecules were capable of penetrating throughout the tablets and relatively high diffusivity was similar to that in the polyion complex tablet, whereas like the HPMC matrix tablet, it was well swollen. This study succeeded in characterizing the tablet hydration process. MRI provides profound insight into the state of water molecules in hydrating tablets; thus, it is a useful tool for understanding drug release mechanisms at a molecular level.     

Hydroxypropyl methylcellulose based cephalexin extended release tablets: influence of tablet formulation,hardness and storage on in vitro release kinetics

The object of this study was to develop hydroxypropyl methylcellulose (HPMC) based cephalexin extended release tablet, which can release the drug for six hours in predetermined rate. Twenty-one batches of cephalexin tablets were prepared by changing various physical and chemical parameters, in order to get required theoretical release profile. The influences of HPMC, microcrystalline cellulose powder (MCCP), granulation technique, wetting agent and tablet hardness on cephalexin release from HPMC based extended release tablets were studied. The formulated tablets were also characterized by physical and chemical parameters. The dissolution results showed that a higher amount of HPMC in tablet composition resulted in reduced drug release. Addition of MCCP resulted in faster drug release. Tablets prepared by dry granulation was released the drug slowly than the same prepared with a wet granulation technique. Addition of wetting agent in the tablets prepared with dry granulation technique showed slower release. An increase in tablet hardness resulted in faster drug release. Tablets prepared with a wet granulation technique and having a composition of 9.3% w/w HPMC with a hardness of 10-12 kg/cm(2) gave predicted release for 6 h. The in vitro release data was well fit in to Higuchi and Korsmeyer-Peppas model. Physical and chemical parameters of all formulated tablets were within acceptable limits. One batch among formulated twenty-one batches was successful and showed required theoretical release. The effect of storage on in vitro release and physicochemical parameters of successful batch was studied and was found to be in acceptable limits.     

Design and in vitro evaluation of zidovudine oral controlled release tablets prepared using hydroxypropyl methylcellulose

Oral controlled release matrix tablets of zidovudine were prepared using different proportions and different viscosity grades of hydroxypropyl methylcellulose. The effect of various formulation factors like polymer proportion, polymer viscosity and compression force on the in vitro release of drug were studied. In vitro release studies were carried out using United States Pharmacopeia (USP) type 1 apparatus (basket method) in 900 ml of pH 6.8 phosphate buffer at 100 rpm. The release kinetics were analyzed using Zero-order model equation, Higuchi's square-root equation and Ritger-Peppas' empirical equation. Compatibility of drug with various formulations excipients used was studied. In vitro release studies revealed that the release rate decreased with increase in polymer proportion and viscosity grade. Increase in compression force was found to decrease the rate of drug release. Matrix tablets containing 10% hydroxypropyl methylcellulose (HPMC) 4000 cps were found to show a good initial drug release of 21% in the first hour and extended the release upto 16 h. Matrix tablets containing 20% HPMC 4000 cps and 10% HPMC 15000 cps showed a first hour release of 18% and extended the release upto 20 h. Mathematical analysis of the release kinetics indicated that the nature of drug release from the matrix tablets followed non-Fickian or anomalous release. No incompatibility was observed between the drug and excipients used in the formulation of matrix tablets. The developed controlled release matrix tablets of zidovudine, with good initial release (17-25% in first hour) and which extend the release upto 16-20 h, can overcome the disadvantages of conventional tablets of zidovudine.     

Release from or through a wax matrix system. IV. Generalized expression of the release process for a reservoir device tablet

Generalization of the release process through the wax matrix layer was examined by use of a reservoir device tablet. The wax matrix layer of the reservoir device tablet was prepared from a physical mixture of lactose and hydrogenated castor oil to simplify the release properties. Release through the wax matrix layer showed zero-order kinetics in a steady state after a given lag time, and could be divided into two stages. The first stage was the formation process of water channel by dissolving the soluble component in the wax matrix layer. The lag time obtained by applying the square root law equation was well connected with the amount of the matrix layer and mixed weight ratio of components in this layer. The second stage was the zero-order release process of drug in the reservoir through the wax matrix layer, because the effective surface area was fixed. The release rate constants were connected with thickness of the matrix layer and permeability coefficient, and the permeability coefficients were connected with the diffusion coefficient of drug and porosity. Hence the release rate constant could be connected with the amount of matrix layer and the mixed weight ratio of components in the matrix layer. It was therefore suggested that the release process could be generalized using the amount of matrix layer and the mixed weight ratio of components in the matrix layer.     

Absorption of diltiazem in beagle dog from pulsatile release tablet.

An orally applicable pulsatile drug delivery system in dry-coated tablet form was prepared using diltiazem hydrochloride as the model drug, and a polyvinyl chloride-hydrogenated castor oil-polyethyleneglycol mixture as the outer shell of the tablet. In vitro drug release from the prepared tablet exhibited a typical pulsatile pattern with a 7 h lag phase (non-drug release period). This dosage form was orally administered to three beagle dogs under non-fasting and fasting conditions, and the plasma concentration level of diltiazem was determined according to time after administration. The result of the in vivo study in non-fasting dogs suggested that the drug could be released in the gastrointestinal tract as in the in vitro test. However, under the fasting condition, a large difference in the plasma concentration profile was found, suggesting that the disintegration time of the tablet tended to be influenced by the feeding condition of subject.     

Bilayer tablets of atorvastatin calcium and nicotinic acid: formulation and evaluation

The objective of the study is to formulate bilayer tablets consisting of atorvastatin calcium (AT) as an immediate release layer and nicotinic acid (NA) as an extended release layer. The immediate release layer was prepared using super disintegrant croscarmellose sodium and extended release layer using hydroxypropylmethyl cellulose (HPMC K100M). Both the matrix and bilayer tablets were evaluated for hardness, friability, weight variation, thickness, and drug content uniformity and subjected to in vitro drug release studies. The amount of AT and NA released at different time intervals were estimated by HPLC method. The bilayer tablets showed no significant change either in physical appearance, drug content or in dissolution pattern after storing at 40 degrees C/75% relative humiding (RH) for 3 months. The release of the drug from the tablet was influenced by the polymer content and it was much evident from thermogravimetry/differential thermal analysis (TG/DTA) analysis. The results indicated that the bilayer tablets could be a potential dosage form for delivering AT and NA.     

Design and preparation of pulsatile release tablet as a new oral drug delivery system.

To achieve time-controlled or site specific delivery of a drug in the gastrointestinal tract, an orally applicable pulsatile drug release system with the dry-coated tablet form was developed. The system consisted of a less water permeable outer shell and a swellable core tablet; from such a system, the drug was expected to be rapidly released after a certain period of time on the basis of time-controlled disintegration mechanism. Various model disks of outer shell, consisting of hydrogenated castor oil and polyethyleneglycol 6000, were tested for their water penetration rate. The experimental results showed that water penetration proceeded obeying the boundary retreating mechanism, so that the lag time of the system could be controlled by changing either the thickness or the composition of the outer shell. The swelling force of various commercially available disintegrants was quantitatively compared, and it was found that carboxymethylcellulose calcium was the preferable disintegrant to be used for the core tablet. On the basis of the results of a series of fundamental studies, various pulsatile release tablets of isoniazide with different lag times were designed. In the in vitro dissolution test, typical pulsatile release was achieved for all the tablets prepared, and a good correlation was found between the observed lag time and the estimated lag time calculated from an empirical equation deduced from the thickness and polyethyleneglycol 6000 content of the outer shell.     

Release from or through a wax matrix system. III. Basic properties of release through the wax matrix layer

Release property of reservoir device matrix tablet was examined. Wax matrix layer was prepared from physical mixture of lactose and hydrogenated castor oil to obtain basic release properties. Release process showed zero order kinetics in a steady state after a given lag times, and could be divided into two stages. The first stage was the formation process of water channel by dissolving the soluble component in the wax matrix layer. The lag time was considered to be the time required forming water channel and the time begun to release drug through the wax matrix layer at the same time. The lag time obtained by applying the square root law equation was well connected with the amount of matrix layer and mixed weight fraction of component in matrix layer. The second stage was the zero order release process of drug in the reservoir through the wax matrix layer. The release rate constants were calculated by taking into accounts of the thickness of matrix layer and permeability coefficient, and were well connected with the amount of matrix layer and mixed weight fraction of component. Also it was suggested that the tortuosity of matrix layer could be expressed by a function of the porosity defined by the mixed weight fraction.     

Study of the critical points in lobenzarit disodium hydrophilic matrices for controlled drug delivery

Percolation theory is a multidisciplinary theory that studies chaotic systems. It has been applied in the pharmaceutical field since 1987. The application of this theory to study the release and hydration rate of hydrophilic matrices allowed for first time to explain the changes in release and hydration kinetic of swellable matrices type controlled delivery systems. The objective of the present paper is to estimate the percolation threshold of HPMC K4M in matrices of lobenzarit disodium and to apply the obtained result to the design of hydrophilic matrices for the controlled delivery of this drug. The materials used to prepare the tablets were Lobenzarit disodium (LBD) and HPMC of viscosity grade K4M. The drug mean particle size was 42+/-0.61 mum and the polymer was sieved and 150-200 microm granulometric fraction was selected. The formulations studied were prepared with different excipient contents in the range of 10-80% w/w. Dissolution studies were carried out using the paddle method and the water uptake measurements were performed using a modified Enslin apparatus. In order to estimate the percolation threshold, the behaviour of the kinetic parameters with respect to the volumetric fraction of each component at time zero, was studied. According to percolation theory, the critical points observed in dissolution and water uptake studies are attributed to the existence of an excipient percolation threshold. This threshold was situated between (18.58 to 24.33% v/v of HPMC). Therefore, the LBD-HPMC K4M matrices with a relative HPMC particle size of should be formulated with an excipient content above 24.33% v/v of HPMC, to obtain a control of the drug release from these systems.     

Formulation approach for nicorandil pulsatile release tablet

The purpose of this study was to obtain a nicorandil pulsatile release tablet that has a well-regulated release lag time. When nicorandil is used as an antiangina drug, administration time control is important. A pulsatile release tablet is one of the effective approaches to modified release to reduce daily administration frequency. In this study, a pulsatile release tablet of nicorandil was formulated by fumaric acid dry coating around the core tablet including nicorandil. The model tablets, which had different content ratios of excipients in the dry-coating layer, were characterized by a dissolution test. The results showed that the release lag time was generated with fast release profiles. Various lag time controls of tablets were achieved, from 60 to 310 min on average, by variation of outer layer composition. From an analysis of the relation between lag times and outer layer composition, the key ingredient for prolongation of lag time was found to be fumaric acid. To analyze the lag time generation mechanism, water penetration for tablet was measured. The results indicated that the penetration depth was proportionate to the square root of time and the lag time formation mechanism was simple water penetration through the matrix of fumaric acid to the tablet core. The results also showed that the Washburn equation could be used to design the lag time of the pulsatile release tablet in this study. In conclusion, novel release control technology using fumaric acid was appropriate to obtain a nicorandil pulsatile release tablet that has well regulated lag time.     

Image analysis studies of dimensional changes in swellable hydrophilic polymer matrices

Studies of the fronts which are created by the process of swelling, their movement and the effect of drug solubility on release mechanisms, are presented. Tablets comprising solely of hydroxypropyl methylcellulose (HPMC) (Metolose 90 SH 100 000 SR), HPMC with sodium diclofenac (relatively soluble in the buffer solution used) and HPMC with furosemide (insoluble in the buffer solution used) were prepared. The tablets were made by direct compression in a manual hydraulic press and the matrix swelling was studied by an optical analysis technique. During the experimental procedure measurements were taken of the gel layer dimensions, the movement of the swelling, and the erosion and diffusion fronts at different time points. These measurements allowed the investigation of the possible mechanisms involved in the swelling/release process. The results showed that the rate and mechanism of drug release from swellable matrices depends on the following factors: the dissolution, the diffusion of the drug, the translocation of undissolved drug particles in the gel layer, and the solubility of the drugs used. This is supported by the following: (a) the diffusion layer thickness, which is observed as a result of the presence of undissolved drug in the gel layer, increases in the case of the water insoluble drug furosemide and as a result the diffusion front converges on the erosion front; (b) from the analysis of the dissolution data it appears that sodium diclofenac is released as a result of diffusion via the gel layer as well as due to polymer relaxation and/or matrix erosion. Conversely, the release of furosemide is only dependent on the polymer relaxation and/or matrix erosion. Copyright © 2004 John Wiley & Sons, Ltd.     

New solid mucoadhesive systems for benzydamine vaginal administration

The aim of this work was the realization of new formulations for vaginal application to improve the pharmacological effect of benzydamine, displaying both anti-inflammatory and antiseptic activities. For this reasons, this drug was formulated in solid dispersions, by using the mucoadhesive polymers HPMC and/or Carbopol(?), then compressed. Tablets were characterized by studies of friability, hardness, hydration, DSC, mucoadhesion and in vitro release. Kinetics, responsible for drug delivery, was investigated as well. Tablets prepared by using only HPMC showed the best results in terms of swelling and mucoadhesion (time and force) together with prolonged and complete drug release, by diffusive mechanism, through gelled layer. Despite the good mucoadhesive properties, Carbopol(?) does not represent a good excipient because, after the contact with water, it generates a spongy gel layer, not homogeneous, stiff, brittle and with breaking tendency when highly swelled. This kind of gel does not guarantee a linear drug release and could provoke discomfort because of fragment release. HPMC mucoadhesive tablets could be a proper delivery system for benzydamine administration representing a good alternative to traditional dosage forms for vaginal topical therapy.     

Development and evaluation of a monolithic floating drug delivery system for acyclovir

Acyclovir (ACV), a model drug for this study, is one of the most effective drugs against viruses of the herpes group. Absorption of orally administered ACV is variable and incomplete, with a bioavailability of ca. 15-30%. The drug is absorbed in the duodenum after oral administration and hence, preparation of a floating drug delivery system (FDDS) for ACV may increase oral absorption of the drug. ACV matrix tablets (200?mg) containing an effervescent base (sodium bicarbonate and citric acid) and a binary combination of hydroxypropyl methylcellulose (HPMC) K4M with carbopol or sodium carboxymethyl cellulose (Na CMC) or polyvinylpyrrolidone (PVP) and/or sodium alginate were prepared by the direct compression method. The tablets were evaluated for physicochemical properties and in vitro floating ability (floating lag-time and duration), bioadhesiveness and drug release. The drug release studies were carried out in 0.1?N HCl (pH 1.2) at 37±0.5°C. At appropriate time intervals, samples were withdrawn and assayed spectrophotometrically at λ(max)=259?nm. The floating test showed tablets containing 15% effervescent base had a floating lag time of 10-30?s and a duration of floating time of 24?h. The formulations containing HPMC-PVP, HPMC-Na CMC, HPMC-carbopol, and HPMC-sodium alginate released about 60-90% of their drug content during a 12-h period. Increasing carbopol caused slower drug release. We concluded that the proposed tablets with 15% effervescent base, 20-30% HPMC, 30% Na CMC (and/or 20% PVP or 20% sodium alginate) showed good floating and drug release properties in vitro, and should be considered as FDDS for ACV.     

Design and evaluation of bioadhesive in-situ nasal gel of ketorolac tromethamine

The present study was aimed at developing safe and effective bioadhesive gelling systems of ketorolac tromethamine, a potent non-narcotic analgesic with moderate anti-inflammatory activity for nasal systemic delivery. Chitosan and pectin based gelling systems were prepared with variables like polymer concentration and type. These systems were characterized in terms of their physical properties, in vitro bioadhesion, in vitro drug release and long-term stability. The anti-inflammatory activity and mucosal irritancy of selected gels were also evaluated in rats and these results were compared with per oral, intraperitoneal and nasal solution administration of ketorolac tromethamine. All the prepared formulations gelled immediately at the nasal mucosal pH and showed longer contact time. Addition of hydroxypropyl methylcellulose (HPMC) in both chitosan and pectin based gelling systems increased the viscosity and gel strength. All the formulated gels exhibited pseudoplastic rheology and diffusion-controlled drug release. The results from stability studies revealed that the prepared thermogels showed marginal decrease in viscosity but at the same time, no significant difference in drug content, and in vitro release characteristics were observed before and after accelerated studies. The developed gelling systems produced only mild to negligible irritant effect to nasal mucosae as compared to control group.     

Release from or through a wax matrix system. VI. Analysis and prediction of the entire release process of the wax matrix tablet

Analysis of the entire release process of the wax matrix tablet was examined. Wax matrix tablet was prepared from a physical mixture of drug and wax powder to obtain basic or clear release properties. The release process began to deviate from Higuchi equation when the released amount reached at around the half of the initial drug amount. Simulated release amount increase infinitely when the Higuchi equation was applied. Then, the Higuchi equation was modified to estimate the release process of the wax matrix tablet. The modified Higuchi equation was named as the H-my equation. Release process was well treated by the H-my equation. Release process simulated by the H-my equation fitted well with the measured entire release process. Also, release properties from and through wax matrix well coincident each other. Furthermore, it is possible to predict an optional release process when the amount of matrix and composition of matrix system were defined.     

Synthesis and immobilization of micro-scale drug particles in cellulosic films

The anti-solvent synthesis of micron-scale particles, their stabilization, and subsequent self-assembly into polymer films suitable for drug delivery is presented. The colloidal particles were stabilized using low molecular weight hydroxypropyl methylcellulose (HPMC), while drug encapsulation was carried out with high molecular weight HPMC and polyvinylpyrrolidone (PVP). Griseofulvin (GF) was used as the model drug compound, and the polymer films were evaluated in terms of their surface morphology, mechanical properties and in vitro drug release. In general, the release rates were best described by first-order and Hixson-Crowell kinetic models, and in a typical film containing 57% HPMC, 100% of GF was released within 50 min.     

Preparation of Losartan Potassium Controlled Release Matrices and In-Vitro Investigation Using Rate Controlling Agents

Controlled release matrices have predictable drug release kinetics, provide drugs for an extended period of time, and reduce dosing frequency with improved patient compliance as compared with conventional tablet dosage forms. In the current research work, losartan potassium controlled release matrix tablets were fabricated and prepared with rate altering agents; that is, Ethocel grade 100 combined with Carbopol 934PNF. Various drug to polymer ratios were used. HPMC, CMC, and starch were incorporated in some of the matrices by replacing some amount of filler (5%). The direct compression method was adopted for the preparation of matrices. In phosphate buffer (pH 6.8), the dissolution study was conducted by adopting the USP method-I as the specified method. Drug release kinetics was determined and dissolution profiles were also compared with the reference standard. Prolonged release was observed for all matrices, but those with Ethocel 100FP Premium showed more extended release. The co-excipient (HPMC, CMC, and starch) exhibited enhancement in the drug release rates, while all controlled release matrices released the drug by anamolous non-Fickian diffusion mechanism. This combination of polymers (Ethocel grade 100 with Carbopol 934PNF) efficiently extended the drug release rates up to 24 h. It is suggested that these matrix tablets can be given in once a day dosage, which might improve patient compliance, and the polymeric blend of Ethocel grade 100 with Carbopol 934PNF might be used in the development of prolonged release matrices of other water-soluble drugs.     

Nasal in situ gel containing hydroxy propyl ��-cyclodextrin inclusion complex of artemether: development and in vitro evaluation

The objective of the present investigation was to explore the formulation and evaluation of in situ gel for the nasal delivery of artemether (ARM), a poorly water-soluble antimalarial agent using temperature induced gelation technique using Pluronic with mucoadhesive polymer Hydroxy Propyl Methyl Cellulose (HPMC) K4M in different ratios. Initially, due to low water solubility, an inclusion complex of the antimalarial artemether (ARM) in hydroxypropyl-??-cyclodextrin (HP??CD) was prepared and characterized. The in situ gels so prepared were characterized for its gelation properties, viscosity, gel strength, mucoadhesion, drug content, drug release rate and for its histopathological studies. Pluronic and HPMC based in situ gel (PLH2) showed the effective gelation, viscosity, gel strength and drug release properties along with good mucoadhesive strength, it is further subjected for stability studies carried out at 30 ± 2 °C and 60 ± 5% RH for 90 days in order to know the influence of temperature and relative humidity on drug content and on drug release profile. Histological examination of formulations did not show any remarkable damage to nasal mucosa. The formulation also retained the good stability at accelerated conditions over the period of 90 days. Owing to these properties it can be used as an effective delivery system for the nasal route. These in situ gelling systems would be definitely useful for cerebral malaria.     

Three-dimensional porous HPMA-co-DMAEM hydrogels for biomedical application

The aim of this work is to develop a novel biocompatible drug delivery carrier and tissue engineering scaffold with the ability of controlled drug release and also tissue regeneration. We have synthesized N-(2-hydroxypropyl)methacrylamide and 2-(dimethylamino)ethyl methacrylate copolymer-based hydrogels loaded with doxorubicin and tested in vitro. The manifestation of temperature sensitivity is noted with a sharp decrease or increase in hydrogel optical transparency that happens with the temperature exceeding a critical transition value. The drug release profile exhibited pH-sensitive behavior of the hydrogel. The hydrolytic degradation of gel and in vitro studies of polymer–doxorubicin conjugate and doxorubicin release from hydrogel matrix indicated that hydrogels were stable under acidic conditions (in buffers at pH 4.64 and 6.65). In both drug forms, polymer–doxorubicin conjugate and free doxorubicin could be released from the hydrogel scaffold at a rate depending directly on either the rate of drug diffusion from the hydrogel or rate of hydrogel degradation or at rate controlled by a combination of the both processes. In vitro analysis showed homogenous cell attachment and proliferation on synthesized hydrogel matrix. In vivo implantation demonstrated integration of the gel with the surrounding tissue of mice within 2 weeks and prominent neo-angiogenesis observed in the following weeks. This multifunctional hydrogels can easily overcome biological hurdles in the in vivo conditions where the pH range changes drastically and could attain higher site-specific drug delivery improving the efficacy of the treatment in various therapeutical applications, especially in cancer therapy, and could also be used as tissue engineering scaffold due to its porous interconnected and biocompatible behavior.