Packing density of conventional waveguides and photonic crystal waveguides

We compare coupling between parallel waveguides within one-dimensional photonic crystals and coupling between conventional waveguides. We consider the situation in which coupling between the waveguides is minimized, so that light in the waveguides propagates essentially independently. Subject to this condition, we compare the minimum mutual distance between conventional planar waveguides and waveguides in one-dimensional photonic crystals. We find that the packing densities of the conventional and periodic structures are comparable.     

Self-guiding of infrared and visible light in photonic crystal slabs

We experimentally demonstrate diffractionless guidance and efficient routing of light in two-dimensional photonic crystal slabs at infrared and visible wavelengths. Our particular design allows for simultaneous guidance of TE and TM polarized light beams at the same wavelength. Routing performance and possibilities of propagation loss reduction are investigated experimentally. Experimental results are in excellent agreement with three-dimensional simulations.     

Coupling constant of microcavity waveguides based on coupled mode theory

We analyze the microcavity waveguides and derive the coupling constant based on the coupled mode theory. The formula contains only two parameters with clear physical meanings, the quality factor of the cavity modes and the phase shift that the lightwave acquires when tunnelling between two cavities. It provides an easy way to express and modulate the properties of the waveguides. Our analytical results are supported by the simulations using the transfer matrix method.     

Magneto-optical defects in two-dimensional photonic crystals

We analyze the properties of magneto-optical defect states in two-dimensional photonic crystals. With out-of-plane magnetization, the magneto-optical coupling splits doubly-degenerate TE states into two counter-rotating modes at different frequencies. The strength of magneto-optical coupling strongly depends on the spatial overlap of the cavity domain structures and the cross product of the modal fields. The transport property of the resultant nonreciprocal states is demonstrated in a junction circulator structure with a magneto-optical cavity coupled to three waveguides. By a proper matching of the magneto-optical frequency splitting with the cavity decay rate into the waveguide, ideal three-port circulator characteristics with complete isolation and transmission can be achieved, with an operational bandwidth proportional to the magneto-optical constant. The proposed optical circulator in a bismuth-iron-garnet/air photonic crystal is demonstrated with finite-difference time-domain calculations and is compared to an alternative implementation of silicon/air crystal infiltrated with a single bismuth-iron-garnet domain.     

Absolute photonic band gaps in a two-dimensional photonic crystal with hollow anisotropic rods

The plane-wave expansion method is used to calculate photonic band gaps for two structures with hollow anisotropic tellurium (Te) rods. Both structures are found to have absolute band gaps at the low- and high-frequency regions. Compared with the photonic crystal with solid Te rods, the photonic crystal with hollow Te rods has a large absolute band gap at the high-frequency region: for the triangular lattice of oval hollow Te rods, there is an absolute band gap of 0.058w_e (w_e=2πc/a), and for the square lattice of square hollow Te rods, there is an absolute band gap of 0.056w_e.     

Beaming effect from increased-index photonic crystal waveguides

We study the beaming effect of light for the case of increased-index photonic crystal (PhC) waveguides, formed through the omission of low-dielectric media in the waveguide region. We employ the finite-difference time-domain numerical method for characterizing the beaming effect and determining the mechanisms of loss and the overall efficiency of the directional emission. We find that, while this type of PhC waveguide is capable of producing a highly collimated emission as was demonstrated experimentally, the inherent characteristics of the structure result in a restrictively low efficiency in the coupling of light into the collimated beam of light.     

The directional emission sensitivity of photonic crystal waveguides to air hole removal

To obtain highly directional light output from photonic crystal waveguides (PCWs), the emission characteristics of the narrow-width waveguide structures are investigated by tailoring the geometry of the exit sides. The local structural deformations in the form of air hole removal from the triangular-lattice photonic crystal (PC) show the effectiveness of the previously proposed approach that was implemented by us for another type of PC. The spatial broadening of the beam is greatly suppressed. With the modified waveguide exits, highly directional emissions with small side lobes are achieved. The frequency dependency of the directional emissions is evaluated. We show that the divergence angles of the beams depend linearly on the wavelength for a regular type of PCW but the modified PCW exits have local minima with respect to wavelength in terms of the divergence angle. The present work may prove to be helpful in the design of couplers and edge-emitting lasers and in the implementation of free-space optical communications.     

Creation of tunable absolute bandgaps in a two-dimensional anisotropic photonic crystal modulated by a nematic liquid crystal

Photonic crystals (PCs) have many potential applications because of their ability to control light-wave propagation. We have investigated the tunable absolute bandgap in a two-dimensional anisotropic photonic crystal structures modulated by a nematic liquid crystal. The PC structure composed of an anisotropic-dielectric cylinder in the liquid crystal medium is studied by solving Maxwell's equations using the plane wave expansion method. The photonic band structures are found to exhibit absolute bandgaps for the square and triangular lattices. Numerical simulations show that the absolute bandgaps can be continuously tuned in the square and triangular lattices consisting of anisotropic-dielectric cylinders by infiltrating nematic liquid crystals. Such a mechanism of bandgap adjustment should open up a new application for designing components in photonic integrated circuits.     

Enhanced beaming of light from a photonic crystal waveguide via a self-collimation photonic crystal

A simple method to control the light transmission from a photonic crystal waveguide (PCW) is proposed. The self-collimation (SC) effect in PC is utilized to depress the diffractive behavior of the light beam emitting out from the PCW. The finite difference in time domain (FDTD) simulation results show that choosing appropriate self-collimation frequency and the space between the PCW and the SC-PC can achieve a very good collimating beam in the outgoing side.     

Efficient transmission in cascaded photonic crystal waveguides via a strong coupling effect

A design of cascaded photonic crystal waveguide is proposed in this paper inspired by the work of Tang et al. [D. Tang, L. Chen, W. Ding, Appl. Phys. Lett. 89 (2006) 131120]. In contrast to a conventional waveguide source, a plane wave source is applied in the current design. We show that an efficient guide mode in the photonic band gap can be achieved. The same idea also works for a slight variation by defects introduction in the photonic crystal. Finally, the strong coupling effect present in the cascaded waveguides is demonstrated by an analogy with photonic quantum wells.     

Transmission Properties of W3 Y-Branch Filters in Two-Dimensional Photonic Crystal Slabs

A highly efficient W3 Y-branch filter in a two-dimensional photonic crystal slab with triangular lattice of air holes is designed and fabricated, and its transmission properties are measured. By accurately adjusting the size of the resonant cavities, the minimum wavelength spacing of 7 nm between two channels is realized. The corresponding resonant wavelengths of the two cavities agree well with the calculated ones. This implies that this kind of fiIter may be promising in integrated wavelength division multiplexing system.     

Mach-Zehnder Interferometer Based on Coupled Dielectric Pillars

We propose a Mach-Zehnder interferometer （MZI） based on coupled dielectric pillars. It is composed of single-row pillar coupled waveguide modulating arms and three-row pillar waveguide 3 dB couplers. The slow light property and transmission loss of the single-row pillar modulating arm are optimized by the plane wave expansion method. A short 3dB coupler is designed based on the modes transformation in three-row pillar waveguide. Finite difference time domain simulations prove the validity of this MZI and show that it has low insertion loss of 1.1 dB and high extinction ratio of 〉 12 dB.     

Beaming effect in multimode photonic crystal by using coupled waveguides

Beaming effect of a multimode photonic crystal (PC) covered by a waveguide array on the exit plane is investigated theoretically. The simulation results show that the multimode PC can make the incident light split into two beams, which can be regarded as secondary sources radiating light into the waveguide array. As a result, many light beams can be generated in the array by the coupling among the waveguides, and the interference of these light beams after passing the system leads to directional emission. Additionally, the directional emission is greatly affected by the beam distribution on the exit plane of the system. Once the main light beams are formed on the exit plane of the system by modulating the system size, steady beaming effect can be obtained in the horizontal direction.     

Flexible Control of Light Propagation Using a Novel Photonic Crystal Hetero-Waveguide Based on Silicon-on-Insulator Slab

We demonstrate a photonic crystal hetero-waveguide based on silicon-on-insulator (SOI) slab, consisting of two serially connected width-reduced photonic crystal waveguides with different radii of the air holes adjacent to the waveguide. We show theoretically that the transmission window of the structure corresponds to the transmission range common to both waveguides and it is in inverse proportion to the discrepancy between the two waveguides. Also the group velocity of guided mode can be changed from low to high or high to low, depending on which port of the structure the signal is input from just in the same device, and the variation is proportional to the discrepancy between the two waveguides. Using this novel structure, we realize flexible control of transmission window and group velocity of guided mode simultaneously.     

Superbending effect in two-dimensional graded photonic crystals

We study the superbending effect in a two-dimensional graded photonic crystal (GPC) for both TE and TM modes. We show that the lateral beam shift is extremely sensitive to the wavelength for the TM mode but not TE mode, indicating the potential in designing some special superbending devices, for example, TE/TM splitter and polarization-indifference waveguide at prescribed wavelengths.     

Design, Fabrication, and Measurement of Two-Dimensional Photonic Crystal Slab Waveguides

Two-dimensional photonic crystal slab waveguides on SOI wafer are designed and fabricated. Photonic band gap, band gap guided mode, and index guided mode are observed by measuring the transmission spectra. The experimental results are in good agreement with the theoretical ones.     

Optical channel waveguides with trapezoidal-shaped cross sections in KTiOPO4 crystal fabricated by ion implantation

Optical channel waveguides were fabricated in KTiOPO₄ crystal by He⁺-ion implantation using photoresist masks with wedged-shaped cross sections. Semi-closed barrier walls with reduced refractive indices inside the crystal constructed the enclosed regions to be channel waveguides with trapezoidal-shaped cross sections. The m-line as well as end-fire coupling arrangements were performed to characterize the waveguides with light at wavelength of 632.8 nm. The propagation loss of the channel waveguides was determined to be as low as ∼2 dB/cm after simple post-irradiation thermal annealing treatment in air.     

Efficient couplers for photonic crystal waveguides

We use two-dimensional simulations to study the design of tapers to provide efficient, low reflection coupling between a waveguide in a two-dimensional photonic crystal (PC) and free space. We find that, largely independent of the PC parameters, or of the length and width of the tapered region, the same type of concave, horn-shaped tapering profile is optimal for coupling from the waveguide into free space, and significantly out-performs the widely used linear taper. We also find that optimal tapers can radiate nearly Gaussian beams, and therefore they can also provide efficient coupling of Gaussian beams from free space into the PC waveguide. These properties are better exhibited by rod-type PCs with E_z polarization than by hole-type PCs with H_z polarization. This study of taper couplers exemplifies a design strategy for photonic circuits which optimizes positioning of the cylinders immediately surrounding the light path, and then builds the rest of the crystal structure around these cylinders.     

Propagation of light through localized coupled-cavity modes in one-dimensional photonic band-gap structures

We report on the observation of a new type of propagation mechanism through evanescent coupled optical cavity modes in one-dimensional photonic crystals. The crystal is fabricated from alternating silicon-oxide/silicon-nitride pairs with silicon-oxide cavity layers. We achieved nearly full transmission throughout the guiding band of the periodic coupled cavities within the photonic band gap. The tight-binding (TB) parameter κ is determined from experimental results, and the dispersion relation, group velocity and photon lifetime corresponding to the coupled-cavity structures are analyzed within the TB approximation. The measurements are in good agreement with transfer-matrix-method simulations and predictions of the TB photon picture. Received: 21 August 2000 / Revised version: 22 August 2000 / Published online: 9 November 2000     

Emissions of Photonic Crystal Waveguides with Discretely Modulated Surfaces

Transmission properties of photonic crystal （PC） waveguides with discretely modulated exit surfaces are investigated numerically using the finite-difference time-domain （FDTD） method. Unlike the case of periodically modulated surfaces, where the transmission beam tends to be a single and directional beam, when the exit surfaces are modulated only at several discrete points, the emission power tends to split into multiple and directional beams. We explain this phenomenon using a multiple point source interference model. Based on these results, we propose a 1-to-N beam splitter, and numerically realized high efficiency coupling between a PC sub-wavelength waveguide and three traditional dielectric waveguides with a total efficiency larger than 92%. This simple, easy fabrication, and controllable mechanism may find more potential applications in integrated optical circuits.