非线性光学晶体HgGa2S4 和 Hg0.5Cd0.5Ga2S4的能带结构、化学键及光学性质研究

用密度泛函理论和非谐振子模型计算了晶体HgGa₂S₄和Hg_0.5Cd_0.5Ga₂S₄的能带结构、态密度、化学成键及线性、非线性光学性质。结果表明：HgGa₂S₄的价带顶部主要是Ga-S成键态的贡献，导带底部主要是Ga-S反键态的贡献; Hg_0.5Cd_0.5Ga₂S₄的价带顶部主要由S-3p轨道组成，导带底部主要是Ga-S反键态的贡献。布居分析表明Ga-S键主要是共价成分，而Hg-S和Cd-S键主要是离子成分。HgGa₂S₄的折射率计算值与实验值在低能量区很好吻合。另外，HgGa₂S₄的能隙计算值比Hg_0.5Cd_0.5Ga₂S₄小，而二阶非线性极化率比Hg_0.5Cd_0.5Ga₂S₄大。     

The magnetic properties of diluted CoFe2O4 nanomaterials

The magnetic properties of （Cox Fe1-x）A （Zn1-x Fe1＋x）B O4 are studied using mean-field theory and the probability distribution law to obtain the saturation magnetization, the coercive field, the critical temperature, and the exchange interactions with different values of D （nm） and x. High-temperature series expansions （HTSEs） combined with the Pade approximant are used to calculate the critical temperature of （CoxFe1-x）A（Znl-xFe1＋x）BO4, and the critical exponent associated with magnetic susceptibility is obtained.     

机械合金化过程对硫化铋块体热电性能的影响机理

以机械合金化法(MA)结合放电等离子烧结技术(SPS)制备了Bi₂S₃多晶块体热电材料. 研究了MA过程中干磨转速、湿磨时间和湿磨介质对Bi₂S₃多晶热电材料电传输性能的影响. 分析了样品的物相, 观察了显微组织, 测试了电传输性能和热传输性能. 研究表明, 以无水乙醇为湿磨介质时, 随着湿磨时间的延长, 出现了微量Bi₂O₃第二相, 样品的晶粒尺寸减小, 电阻率大幅增加, 功率因子下降. 以丙酮为湿磨介质时, 虽然不存在微氧化反应, 但是由于样品中存在大量孔洞, 导致功率因子降低. 425 r/min 干磨15 h后未湿磨的样品在573 K取得最大的ZT值0.25, 是目前文献报道的最高值.     

Ce4+离子在Ca2SnO4一维结构基质中的电荷迁移光谱研究

利用高温固相反应法制备了Ca₂Sn_1-xCe_xO₄和Ca_2-ySr_ySn_1-xCe_xO₄一维结构发光体. XPS结果显示 Ca₂SnO₄拥有两种结合能分别为5277 eV和5293 关键词： 2Sn_1-xCe_xO₄')" href="#">Ca₂Sn_1-xCe_xO₄ 2-ySr_ySn_1-xCe_xO₄')" href="#">Ca_2-ySr_ySn_1-xCe_xO₄ 一维结构 电荷迁移光谱     

Biosynthesis and magnetic properties of mesoporous Fe3O4 composites

Magnetic Fe₃O₄ materials with mesoporous structure are synthesized by co-precipitation method using yeast cells as a template. The X-ray diffraction (XRD) pattern indicates that the as-synthesized mesoporous hybrid Fe₃O₄ is well crystallized. The Barrett-Joyner-Halenda (BJH) models reveal the existence of mesostructure in the dried sample which has a specific surface area of 96.31 m²/g and a pore size distribution of 8-14 nm. Transmission electron microscopy (TEM) measurements confirm the wormhole-like structure of the resulting samples. The composition and chemical bonds of the Fe₃O₄/cells composites are studied by Fourier transform infrared (FT-IR) spectroscopy. Preliminary magnetic properties of the mesoporous hybrid Fe₃O₄ are characterized by a vibrating sample magnetometer (VSM). The magnetic Fe₃O₄/cells composites with mesoporous structure have potential applications in biomedical areas, such as drug delivery.     

Preparation and magnetic properties of the conductive Co(1−x)NixFe2O4/polyaniline microsphere composites

Core-shell Co_(1−x)Ni_xFe₂O₄/polyaniline nanoparticles, where the core was Co_(1−x)Ni_xFe₂O₄ and the shell was polyaniline, were prepared by the combination of sol-gel process and in-situ polymerization methods. Nanoparticles were investigated by Fourier transform spectrometer, X-ray diffraction diffractometer, Scanning electron microscope, Differential thermal analysis and Superconductor quantum interference device. The results showed that the saturation magnetization of pure Co_(1−x)Ni_xFe₂O₄ nanoparticles were 57.57 emu/g, but Co_(1−x)Ni_xFe₂O₄/polyaniline composites were 37.36 emu/g. It was attributed to the lower content (15 wt%), smaller size and their uneven distribution of Co_(1−x)Ni_xFe₂O₄ nanoparticles in the final microsphere composites. Both Co_(1−x)Ni_xFe₂O₄ and PANI/Co_(1−x)Ni_xFe₂O₄ showed superparamagnetism.     

Preparation and magnetic properties of BaFe12O19/Ni0.8Zn0.2Fe2O4 nanocomposite ferrite

Nanocomposite of hard (BaFe₁₂O₁₉)/soft ferrite (Ni_0.8Zn_0.2Fe₂O₄) have been prepared by the sol–gel process. The nanocomposite ferrite are formed when the calcining temperature is above 800 °C. It is found that the magnetic properties strongly depend on the presintering treatment and calcining temperature. The “bee waist” type hysteresis loops for samples disappear when the presintering temperature is 400 °C and the calcination temperature reaches 1100 °C owing to the exchange-coupling interaction. The remanence of BaFe₁₂O₁₉/Ni_0.8Zn_0.2Fe₂O₄ nanocomposite ferrite with the mass ratio of 5:1 is higher than a single phase ferrite. The specific saturation magnetization, remanence magnetization and coercivity are 63 emu/g, 36 emu/g and 2750 G, respectively. The exchange-coupling interaction in the BaFe₁₂O₁₉/Ni_0.8Zn_0.2Fe₂O₄ nanocomposite ferrite is discussed.     

快离子导体AgxTiS2中Ag+离子－空位的二维基态结构与能量性质研究

根据Ag⁺离子-空位的二维有序结构建立了三维晶胞模型.采用局域密度近似下的平面波赝势方法,对有序Ag_xTiS₂(x=0,1/4,1/3,1/2,2/3,3/4,1)系列进行了几何结构优化和总能量计算,并与Li_xTiS₂系列进行了对比研究.有序Ag_xTiS₂系统的晶格参量增量Δa_{关键词： x}TiS₂')" href="#">Ag_xTiS₂ 有序—无序相变 离子扩散 第一性原理计算     

Synthesis and magnetic properties of hard magnetic (CoFe2O4)-soft magnetic (Fe3O4) nano-composite ceramics by SPS technology

CoFe₂O₄/Fe₃O₄ nano-composite ceramics were synthesized by Spark Plasma Sintering. The X-ray diffraction patterns show that all samples are composed of CoFe₂O₄ and Fe₃O₄ phases when the sintering temperature is below 900 °C. It is found that the magnetic properties strongly depend on the sintering temperature. The two-step hysteresis loops for samples sintered below 500 °C are observed, but when sintering temperature reaches 500 °C, the step disappears, which indicates that the CoFe₂O₄ and Fe₃O₄ are well exchange coupled. As the sintering temperature increases from 500 to 800 °C, the results of X-ray diffractometer indicate the constriction of crystalline regions due to the ion diffusion at the interfaces of CoFe₂O₄/Fe₃O₄ phases, which have great impact on the magnetic properties.     

Comparison of magnetic properties in LixCoO2 and its decomposition products LiCo2O4 and Co3O4

Thermal stability of cathode material in the charged state is an important aspect for the safety of rechargeable batteries. It is well known that layered Li_xCoO₂ decomposes to a mixture of LiCoO₂ and Co₃O₄ at elevated temperatures. However, not many experimental evidences exist on intermediate phases those may form during the decomposition. Using magnetic measurements we show that it is possible to distinguish between the spinels LiCo₂O₄ and Co₃O₄ and thereby follow the decomposition of Li_xCoO₂. We characterize the magnetic behavior of thermally aged Li_xCoO₂ (x = 0.98, 0.76, 0.55) with increasing annealing time. Our results reveal the appearance of magnetic ordering in the thermally degraded products. The detailed analysis illustrates that the formation of Co₃O₄ is preceded by the formation of a meta stable LiCo₂O₄ phase.     

Mn4+掺杂对BiFeO3陶瓷微观结构和电学性能的影响研究

利用传统的固相反应法制备了BiFe_1-xMn_xO₃ (x= 0-0.20)陶瓷样品, 研究了不同Mn⁴⁺掺杂量对BiFeO₃陶瓷密度、物相结构、显微形貌、 介电性能和铁电性能的影响.实验结果表明:所制备的BiFe_1-xMn_xO₃ 陶瓷样品的钙钛矿主相均已形成,具有良好的晶体结构, 且在掺杂量x=0.05附近开始出现结构相变.随着Mn⁴⁺添加量的增加, 体系的相结构有从菱方钙钛矿向斜方转变的趋势,且样品电容率大幅度增大, 而介电损耗也略有增加;在测试频率为10⁴ Hz条件下, BiFe_0.85Mn_0.15O₃ (ε_r=1065)的 ε_r是纯BiFeO₃ (ε_r=50.6)的22倍; 掺杂后样品的铁电极化性能均有不同程度的提高,可能是由于Mn⁴⁺稳定性优于 Fe³⁺,高价位Mn⁴⁺进行B位替代改性BiFeO₃陶瓷, 能减少Bi³⁺挥发,抑制Fe³⁺价态波动,从而降低氧空位浓度,减小样品的电导和漏电流.     

Crystal structure and magnetic properties of Nd（Mn1-xFex）2Si2 compounds

X-ray powder diffraction,resistivity and magnetization studies have been performed on polycrystalline Nd(FexMn1-x)2Si2 (0 ≤ x ≤ 1) compounds which crystallize in a ThCr2Si2-type structure with the space group I4/mmm.The field-cooled temperature dependence of the magnetization curves shows that,at low temperatures,NdFe2Si2 is antiferromagnetic,while the other compounds show ferromagnetic behaviour.The substitution of Fe for Mn leads to a decrease in lattice parameters a,c and unit-cell volume V .The Curie temperature of the compounds first increases,reaches a maximum around x = 0.7,then decreases with Fe content.However,the saturation magnetization decreases monotonically with increasing Fe content.This Fe concentration dependent magnetization of Nd(FexMn1-x)2Si2 compounds can be well explained by taking into account the complex effect on magnetic properties due to the substitution of Mn by Fe.The temperature’s square dependence on electrical resistivity indicates that the curve of Nd(Fe0.6Mn0.4)2Si2 has a quasi-linear character above its Curie temperature,which is typical of simple metals.     

Eu2+, Cr3+共掺杂的MAl12O19 (M=Ca, Sr, Ba) 的发光性质及能量传递

三基色荧光粉中, 红色荧光粉性能较差, 为获得性能优良的红色荧光粉, 本文采用高温固相法合成了Eu²⁺, Cr³⁺单掺杂及共掺杂的碱土金属多铝酸盐MAl₁₂O₁₉ (M =Ca, Sr, Ba) 发光体. 实验表明, 在以上三种基质中均存在Eu²⁺→Cr³⁺的能量传递, 利用能量传递可以有效将Eu²⁺的蓝光或绿光转换为红光. 三种碱土金属多铝酸盐基质的晶体结构相似,但Eu²⁺, Cr³⁺发光受晶体场影响,导致在不同的基质中Eu²⁺, Cr³⁺间能量传递效率不同.通过光谱分析及能量传递效率计算发现, 相同掺杂浓度下,CaAl₁₂O₁₉中Eu²⁺→Cr³⁺的能量传递效率最高,SrAl₁₂O₁₉次之, BaAl₁₂O₁₉最低.红光转换率在CaAl₁₂O₁₉中最高.     

Silane treatment of Fe3O4 and its effect on the magnetic and wear properties of Fe3O4/epoxy nanocomposites

In this study, the effect of silane treatment of Fe₃O₄ on the magnetic and wear properties of Fe₃O₄/epoxy nanocomposites was investigated. Fe₃O₄ nanopowders were prepared by coprecipitation of iron(II) chloride tetrahydrate with iron(III) chloride hexahydrate, and the surfaces of Fe₃O₄ were modified with 3-aminopropyltriethoxysilane. The magnetic properties of the powders were measured on unmodified and surface-modified Fe₃O₄/epoxy nanocomposites using SQUID magnetometer. Wear tests were performed on unmodified and surface-modified Fe₃O₄/epoxy nanocomposites under the same conditions (sliding speed: 0.18 m/s, load: 20 N).The results showed that the saturation magnetization (M_s) of surface-modified Fe₃O₄/epoxy nanocomposites was approximately 110% greater than that of unmodified Fe₃O₄/epoxy nanocomposites. This showed that the specific wear rate of surface-modified Fe₃O₄/epoxy nanocomposites was lower than that of unmodified Fe₃O₄/epoxy nanocomposites. The decrease in wear rate and the increase in magnetic properties of surface-modified Fe₃O₄/epoxy nanocomposites occurred due to the improved dispersion of Fe₃O₄ into the epoxy matrix.     

电弧炉制备的Sm2Fe17-xCrx化合物的结构与磁性

通过X射线衍射、磁测量等手段对电弧炉制备的不同热处理条件的Sm₂Fe_17-xCr_x（x=1—3）化合物的结构和磁性进行了研究.结果表明1050 ℃下退火5 d的Sm₂Fe_17-xCr_x（x=1—3）化合物具有菱方相的Th₂Zn₁₇型结构,同样温度下退 关键词： 2Fe_17-xCr_x化合物')" href="#">Sm₂Fe_17-xCr_x化合物 磁体积效应 居里温度 磁晶各向异性     

Ti1－xCrxO2±δ体系的相关系、晶体结构和磁性能研究

采用溶胶凝胶法制备了Ti_1-xCr_xO_2±δ体系系列样品.利用扫描电子显微镜(SEM)，X射线光电子能谱(XPS)，粉末X射线衍射分析(XRD)方法研究了Ti_1-xCr_xO_2±δ系列样品的颗粒尺寸、形貌、组分化学态、相关系和固溶区范围；并利用超导量子干涉磁强计对样品的磁性能进行了研究.采用Rietveld结构精修的方法研究了Cr的不同掺杂量对TiO₂晶体结构的影响，研究表明，1000℃烧结的样品的固溶区范围是x=0—0.03，为金红石单相；随着Cr掺杂量的增加，金红石相晶胞参数规律性地减小；当x>0.03，为金红石相和CrO₂相两相共存.综合XRD和磁性测量结果，500℃烧结的样品的固溶区范围是x=0—0.02，为锐钛矿单相；随着Cr掺杂量的增加，锐钛矿相晶胞参数规律性地减小；当x≥0.04，为锐钛矿相和绿铬矿相(Cr₂O₃)两相共存.XPS实验结果表明，500℃和1000℃退火的样品中Cr都是以Cr⁺³和Cr⁺⁶两种化学态存在，1000℃烧结的样品中可能有更多的Cr³⁺转化为Cr⁶⁺.根据M-H和M-T曲线的测试结果发现，本文500℃烧结的Ti_1-xCr_xO_2±δ体系样品当x=0—0.02时，为室温铁磁性.当x≥0.04时，由铁磁相和顺磁相所组成，在低温下有较强的铁磁性；室温下主要是顺磁相，铁磁相只占据很小的体积分数. 关键词： 1-xCr_xO_2±δ体系')" href="#">Ti_1-xCr_xO_2±δ体系 相关系 固溶区 磁性能     

A nuclear magnetic resonance study of the structural properties and molecular motions of Li2KH(SO4)2 and LiKSO4 single crystals

The structural properties and relaxation mechanisms of Li₂KH(SO₄)₂ crystals were determined using the temperature dependences of NMR spectra and the spin-lattice relaxation times (T₁) of their ¹H, ⁷Li, and ³⁹K nuclei. The results obtained were compared with the previously reported physical properties of LiKSO₄ crystals. The substitution of the potassium ions with protons in the LiKSO₄ crystals were variations in the phase transition temperatures, and the non-appearance of ferroelastic properties. The ⁷Li T₁ for the Li₂KH(SO₄)₂ crystals was much shorter than the ⁷Li T₁ for the LiKSO₄ crystals, and these findings indicate that the presence of the protons in Li₂KH(SO₄)₂ causes the Li ions to move with greater freedom.     

A chemical lithography route to Bi2S3 nanotubes

Two different semiconducting bismuth sulfide (Bi₂S₃) nanostructures (feather-like Bi₂S₃ nanotubes and fiber-like Bi₂S₃ nanotubes) with diameters around 50-60 nm and lengths about tens of micrometers were prepared successfully by a chemical lithography route. The results indicated that the employment of polyvinylpyrrolidone led to the precursor with feather-like morphology and the acid had ripening effect on and etching action to the ultimate formation of the fiber-like Bi₂S₃ nanotubes. The photoluminescence spectra of two different Bi₂S₃ nanostructures revealed that the relative position of emission peaks was influenced by the thin edges of the feather-like nanotubes due to the quantum-confinement effect.     

新型光存储材料Sr2SnO4: Tb3+, Li+ 的合成及其红外上转换光激励发光性能的研究

采用高温固相法获得了一种只具有 微弱余辉的新型电子俘获型光存储材料Sr₂SnO₄:Tb^{3 +}, Li ⁺. 发光性能研究结果表明: 该材料对980 nm的红外激光具有很好的上转换光激励信息读出响应, 同时292 nm紫外光为其最佳信息写入光源. 光存储性能研究结果表明: 该材料的浅陷阱较少, 因此其余辉发光很弱, 不到500 s; 另一方面, 该材料中存在大量的深蓄能陷阱. 因此, Sr₂SnO₄: Tb^{3 +}, Li⁺是一种具有较好实际应用价值的新型电子俘获型光存储材料. 此外, 还讨论了Sr₂SnO₄: Tb^{3 +}, Li⁺的光存储发光机理.