m-Xylene conversion over dealuminated Y zeolites studied by the pulse method

m-Xylene conversion was studied over dealuminated Y type zeolites in hydrogen forms, SiO₂ to Al₂O₃ ratios were varied from 4.86 to 12.95.

---

- . SiO₂/Al₂O₃ 4,86 12,95.

     

Temperature programmed reduction and oxidation of Ir/Al2O3 catalysts

3 % Ir/Al₂O₃ catalysts have been studied by means of temperature programmed reduction and oxidation. With growing degree of metal oxidation (higher T_ox) reducibility of the catalysts at low temperatures decreases.

---

3% Ir/Al₂O₃ . ( ) .

     

Analysis of thermal desorption spectra of oxygen desorbed from rhodium

Thermal desorption spectra of oxygen desorbed from rhodium have been analyzed in terms of models accounting for the effect of lateral interactions between adsorbed particles and of their diffusion into the bulk of metal on the desorption kinetics of O₂. Complex configuration of these spectra is ascribed to the processes of formation/decomposition of surface Rh oxides and the diffusion of particles into the near-surface layers of metal and back to the surface.

---

- , O₂ . - O₂ Rh - .

     

The kinetic energy components of LCAO-molecular orbitals: A comment on the “Electron-in-a-Box”-“LCAO-MO-Model” analogy

In many textbooks attention is drawn to the close analogy that seems to exist between the Electron-in-a-Box-wave functions _n and their LCAO-MO counterparts _J (J = n) for the movement of an electron in a -system. It is often implied that the wave lengths of _n and of _J (J = n) which satisfy to a high degree the relation =, have the same physical meaning. It is shown that this is not the case. for a linear system (e.g. a one-dimensional Electron-in-a-Box-model) is directly connected with the momentum of the electron and therefore with its kinetic energy according to the deBroglie relation. However, there is no such simple relationship between A and the corresponding kinetic energy component in LCAO-MO's _J . (The necessary two-center kinetic energy integrals have been computed for 1s-type atomic orbitals.)

---

Zusammenfassung In vielen elementaren Textbüchern wird die Aufmerksamkeit auf die scheinbar enge Verwandtschaft hingelenkt, die zwischen den Wellenfunktionen _n für ein Electron-in-a-Box-Modell und den entsprechenden LCAO-MOs _J (J=n) für die Bewegung eines Elektrons in einem -System besteht. Unter anderem wird oft implizit angenommen, daß die Wellenlängen der Funktion _n und von _J (J=n), die weitgehend der Bedingung = genügen, die gleiche physikalische Bedeutung haben. In dieser Arbeit wird gezeigt, daß dies nicht der Fall ist. Für ein lineares System (z. B. ein eindimensionales Electron-in-a-Box-Modell) ist über die deBroglie'sche Beziehung direkt mit dem Impuls und damit mit der kinetischen Energie des Elektrons verknüpft. Im Gegensatz dazu existiert keine einfache Beziehung zwischen und der entsprechenden Komponenten der kinetischen Energie in einem LCAO-MO _J . (Die notwendigen Zweizentrenintegrale der kinetischen Energie wurden für Atomorbitale vom 1s-Typus berechnet.)

---

Résumé Dans les textes élémentaires de chimie théorique on attire souvent l'attention sur l'analogie qui semble exister entre les fonctions d'onde _n pour un modèle «Electron-in-a-Box» et les fonctions correspondantes LCAO-MO _J (J=n) décrivant le mouvement d'un électron dans un système . En particulier cette comparaison implique que les «longueurs d'onde» de _n et de _J (J=n), qui satisfont pratiquement la relation =, ont la même signification physique. Dans ce travail on montre, que ceci n'est pas le cas. Pour un système linéaire (c.à.d. un modèle linéaire du type «Electron-in-a-Box») est reliée directement à la quantité de mouvement et par là à l'énergie cinétique, par la relation de deBroglie. Par contre on ne trouve pas une dépendance analogue entre et la composante correspondante de l'énergie cinétique dans une orbitale moléculaire LCAO _J. (Les intégrales bicentriques pour les composantes d'énergie cinétique nécessaires à ce calcul ont été déterminées pour des orbitales atomiques du type 1s.)

     

Oxidizing supported reagents, III. Oxidation of alcohols by new supported K2Cr2O7 reagents

Several new supported K₂Cr₂O₇ reagents are used in the oxidation of secondary alcohols. The influence of the number of active sites and the nature of solid support on the yield is discussed. The influence of the structure of alcohol on the yield of ketone is analyzed.

---

K₂Cr₂O₇ . . .

     

Hydrogenation of xylenes over supported Pt catalysts. Influence of different variables on their catalytic activity

In this work we studied and compared the catalytic activity of various supported Pt systems on the gas-phase hydrogenation of o-, m- and p-xylene. We analyzed the influence of different catalyst preparation variables (solvent, precursor, salt, support and catalyst reduction temperature used) on the catalytic activity and selectivity towards the corresponding cis-and trans-dimethylcyclohexanes.

---

- o-, m- -. (, , ) - -.

     

Ultrasonic study of the molecular encapsulation and the micellization processes of dodecylethyldimethylammonium bromide-water solutions in the presence of β-cyclodextrin or 2,6-di-o-methyl-β-cyclodextrin

Aqueous solutions of -cyclodextrin (-CD) or 2,6-di-o-methyl--cyclodextrin (DM--CD) and dodecylethyldimethylammonium bromide (D₁₂EDMAB) have been studied from speed of sound (u) data at 298.15 K, using a pulse-echo-overlap technique. The molecular encapsulation process of the surfactant monomer into the cyclodextrin cavity and its effect in the micellization process of the surfactant have been analyzed from theu measurements: I) as a function of [D₁₂EDMAB] in the presence of several initial cyclodextrin concentrations (-CD or.DM--CD); II) as a function of [cyclodextrin] (-CD or DM--CD), for an initial micellar solution of D₁₂EDMAB and; III) as a function of the [cyclodextrin]/[surfactant] stoichiometric concentrations. Both inclusion complexes formed (-CDD₁₂EDMAB) and (DM--CDD₁₂EDMAB) have stoichiometries of 11, and their association constantK have been determined using a model proposed in this work, based on the additivity of the different contributions of the involved species to the speed of sound. The apparent critical micellar concentration, cmc^*, of D₁₂EDMAB is found to increase linearly upon the addition of cyclodextrin (-CD or DM--CD). The free surfactant concentration in the micellar region, [D₁₂EDMAB]_f, decreases in the presence of -CD and slightly increases in the presence of DM--CD. The influence of the parcial methylation of the -cyclodextrin (-CDDM--CD) and of the polar head of the surfactant (D₁₂TAB D₁₂EDMAB) on the complextion and micellar parameters are also discussed.Supplementary material available: Tables of speed of sound (14 pages) are available from the authors.     

Synthesis of dicationic triple-decker complexes with a central B-cyclohexyl-substituted borole ligand

Stacking reactions of the dicationic fragments [LM]²⁺ (LM = (-C₆H₆)Ru, (-C₆H₃Me₃)Ru, or (-C₅Me₅)Rh) with the complex (-C₅H₅)Co(-C₄H₄BCy) (Cy = cyclo-C₆H₁₁) afforded new dicationic 30-electron triple-decker complexes [(-C₅H₅)Co(-:-C₄H₄BCy)ML](BF₄)₂ containing a cyclohexyl-substituted borole ligand in the central position.     

Adsorption behavior of polymers having phosphoric acid group on γ-Fe2O3 and magnetic characteristics in magnetic coatings

Polymers having phosphoric acid groups were prepared as a model binder for magnetic coatings, and the correlation among the adsorption behavior of the polymers onto-Fe₂O₃ particles and the dispersibility, the orientation, and the packing density of-Fe₂O₃ particles in the magnetic coatings was investigated.PMMA homopolymer molecules hardly adsorbed on-Fe₂O₃, and the interfacial tension at a water/polymer solution (toluene) interface ( _W/T) was scarcely changed compared with a water/toluene interface. Increasing with the content of polymeric phosphoric acid group, the adsorbance of polymer increased and the interfacial tension ( _W/T) decreased. When the content of polymeric phosphoric acid groups was over 0.4 mol%, the adsorbance of polymer and interfacial tension ( _W/T ) remained constant. When these polymers were used as a binder for magnetic tapes, the dispersibility of-Fe₂O₃ in the magnetic coatings was improved, increasing with the content of polymeric phosphoric acid group; however, when the content of phosphoric acid group was over 0.2 mol%, its dispersibility decreased abruptly.Studies on Recording Magnetic Materials and Magnetic Composite. XVIII.     

Thermal decomposition of doped ammonium perchlorate

Isothermal decomposition of orthorhombic ammonium perchlorate (AP) has been studied as a function of concentration of the dopants, SO ₄ ^2– and PO ₄ ^3– . In either case, the rate of decomposition passes through a maximum as the dopant concentration increases. Activation energy of the decomposition process remains unaltered by doping. The results are interpreted in terms of electron transfer mechanism.

---

Zusammenfassung Die isotherme Zersetzung von orthorhombischen Ammoniumperchlorat (AP) wurde in Abhängigkeit von der Konzentration der Dopanten SO ₄ ^2– und PO ₄ ^3– untersucht. In jedem Falle geht die Geschwindigkeit der Zersetzung mit steigender Dopantenkonzentration durch ein Maximum. Die Aktivierungsenergie des Zersetzungsprozesses wird durch dopen nicht verändert. Die Ergebnisse werden auf einem Elektronentransfer-Mechanismus basierend interpretiert.

---

- - . . . .

---

---

The author is thankful to Dr. V. R. Pai Verneker of Indian Institute of Science, Bangalore, for stimulating discussions.     

The use of thermal analysis in medical science with special reference to nephroliths

The applications of thermal methods in medical science have been summarized, with special regard to kidney stones. Complex thermal analysis can be used successfully for examination of human and animal urinary calculi, bones, odontoliths biological tissues (proteins, skin, callus, nail) etc.

---

Zusammenfassung Es wurden die Anwendungen der Thermoanalyse auf medizinischem Gebiet unter besonderer Berücksichtigung von Nierensteinen zusammenfassend behandelt. Komplexe thermoanalytische Methoden eignen sich zur Prüfung von menschlichen und tierischen Harnsteinen, Knochen, Zahnstein, biologischem Gewebe (Proteine, Haut, Nägel, usw.)

---

Résumé Revue des applications des méthodes thermoanalytiques dans le domaine médical avec mention particulière pour les calculs rénaux. L'emploi des méthodes d'analyse thermique mixtes donnent de bons résultats pour l'examen des calculs rénaux animaux et humains, du tartre dentaire et des tissus biologiques (protéines, peau, ongles), etc.

---

, . , (, , , ) .

     

Characterization of MoS2/SiO2 by ESR and NO adsorption

Six MoS₂/SiO₂ samples were characterized by XRD, BET surface area, ESR and NO adsorption measurements. Correlation was found between the amount of Mo⁵⁺, sulfur radicals and adsorption capacity for oxygen and NO.

---

MoS₂/SiO₂ , , , NO. Mo⁵⁺, NO.

     

Reactivity and flexibility in platinum metal clusters

The synthesis, structural properties, and fluxional behaviour of platinum-triosmium and platinum-triruthenium clusters derived from Os₃Pt(-H)₂ (CO)₁₀(PR₃) and Ru₃Pt(-H)(-CC ^t Bu)(CO)₉ (dppe) and related species are described.     

Reaction of ammonium sulphate with aluminium oxide

The reaction between ammonium sulphate with aluminium oxide was studied. It was confirmed by X-ray diffraction and chemical analysis that three intermediate reaction products, (NH₄)₃Al(SO₄)₃, NH₄Al(SO₄)₂ and Al₂(SO₄)₃, are formed. The thermal decompositions of these three compounds were carried out. It has been shown that the same rate law is valid for them. The activation energies for (NH₄)₃Al(SO₄)₃, NH₄Al(SO₄)₂ and Al₂(SO₄)₃ are 95.9, 177.9 and 291.0 kj/mol, respectively.

---

Zusammenfassung Die Reaktion von Ammoniumsulfat mit Aluminiumoxid wurde untersucht. Durch Röntgendiffraktion und chemische Analyse wurde bestätigt, daß drei Zwischenprodukte (NH₄)₃Al(SO₄)₃, NH₄Al(SO₄)₂ und Al₂(SO₄)₃ gebildet werden. Die thermische Zersetzung der drei Verbindungen wurde durchgeführt. Es wurde gezeigt, daß für alle drei dasselbe Geschwindigkeitsgesetz Gültigkeit hat. Die Aktivierungsenergien für (NH₄)₃Al(SO₄)₃, NH₄Al(SO₄)₂ und Al₂(SO₄)₃ sind 95.9, 177.9 und 291.0 kJ/Mol.

---

. - : (NH₄)₃Al(SO₄)₃, NH₄Al(SO₄)₂ Al₂(SO₄)₃. , , . (NH₄)₃Al(SO₄)₃, NH₄Al(SO₄)₂ Al₂(SO₄)₃, , 95.9; 177.9 291.0 . ^–1.

---

---

The authors are grateful to Dr. H. Osada and Mr. H. Nakamura, Department of Environmental Engineering, Kyushu Institute of Technology, for their helpful discussions.     

Formation of N-butane in the pyrolysis of ethylene [1]

Yields of n-C₄H₁₀ have been measured from the flow pyrolysis of C₂H₄ at 897 (±7) K. From 77 to 720 Torr the order of n-C₄H₁₀ formation was found to be 2.0±0.3 The rate constant for the reaction, was estimated to be 2.4(±0.6)×10^–4l mol^–1s^–1.

---

-C₄H₁₀ C₂H₄ 897 (±7) . -C₄H₁₀ 77 720 2.0±0.3. 2C₂H₄C₂H₃+C₂H₅ 2,4 (±0,6)×10^{–4 –1–1}.

     

Preparation and Structure Characterization of 4-Amino-1,2,4-triazol-5-one Hydrate

4-Amino-1,2,4-triazol-5-one hydrate (ATO·H₂O) was prepared and its structure was analyzed by four-circle diffraction measurement. The obtained results show that the crystal belongs to the triclinic crystal system, space group P 1 with crystal parameters a = 6.432(1), b = 6.551(1), c = 6.740(1) ; = 68.04(1), = 82.18(1), = 81.90(1)°, V = 259.7(7) ³; Z = 2; Dc = 1.510 g/cm³; = 0.131 mm^-1; F(000) = 124. ATO·H₂O was characterized by FT-IR analysis, X-ray diffraction analysis, and single crystal diffraction analysis.     

Dehydration of lithium triphosphate pentahydrate,Li5P3O10· 5H2O

The kinetics of isothermal-isobaric dehydration of Li₅P₃O₁₀·5H₂O in vacuum (p=10^–1 hPa) and in water vapour atmosphere ( =23·hPa) was investigated by TG in the temperature range 40–140°. It was shown that the initial non-degradation removal of 1/10 of the crystal water, the rate of which is sensitive to , proceeds according to the laws of reversible topochemical reactions. In the next, irreversible degradation stage, where the bulk of the crystal water is removed, the kinetic characteristics of the process and the DSC effects exhibit a low sensitivity to the water vapour pressure. The peculiarities of Li₅P₃O₁₀·5H₂O dehydration were considered in comparison with the thermal behaviour of Na₅P₃O₁₀·6H₂O and K₅P₃O₁₀·4H₂O.

---

Zusammenfassung Die Kinetik der isotherm-isobaren Dehydratisierung von Li₅P₃O₁₀·5H₂O in Vakuum (p=10^–4 hPa) und in Wasserdampfatmosphäre ( =23 hPa) wurde durch TG im Temperaturbereich von 40–140° untersucht. Es wurde gezeigt, daß die anfängliche, noch keine Zersetzung zur Folge habende Eliminierung von 1/10 des Kristallwassers, deren Geschwindigkeit von abhängt, nach den Gesetzen der reversiblen topochemischen Reaktionen abläuft. Im nächsten irreversiblen Zersetzungsschritt, in dem die Hauptmenge des Kristallwassers austritt, sind die kinetischen Kennwerte des Prozesses und die DSC-Effekte nur wenig vom Wasserdampfdruck abhängig. Die Besonderheiten der Dehydratisierung von Li₅P₃O₁₀·5H₂O werden im Vergleich mit dem thermischen Verhalten von Na₅P₃O₁₀·6H₂O und K₅P₃O₁₀·4H₂O erörtert.

---

40–140° - Li₅P₃O₁₀ · 5₂ (=10^–4 ) (=23 ). , 1/10 , . , - . L₅₃₁₀·5₂ Na₅P₃O₁₀·6H₂O K₅₃₁₀·4₂.

     

Zinc oxide as a formose catalyst

Zinc oxide heterogeneously catalyzes formaldehyde condensation to a complex mixture of formose sugars. The reaction proceeds at pH 5.5 and unwanted Cannizzaro side reaction does not occur. The catalyzed reaction is exceptionally slow. At 100°C and 1.00 M ZnO, 0.61 M HCHO starting concentration, the induction period lasts 70 h and 90% conversion does not occur until 92 h. Either addition of D-glucose co-catalyst or reduction in the starting ratio of HCHO to ZnO eliminates the induction period.

---

. pH=5,5 . . 100°C ZnO 1,00 M HCHO 0,61 M 70 , 90%- 92 . -D-, HCHO ZnO