Entropy generation in radiative motion of tangent hyperbolic nanofluid in presence of activation energy and nonlinear mixed convection

In this communication, an optimization of entropy generation is performed through thermodynamics second law. Tangent hyperbolic nanomaterial model is used which describes the important slip mechanism namely Brownian and thermophoresis diffusions. MHD fluid is considered. The novel binary chemical reaction model is implemented to characterize the impact of activation energy. Nonlinear mixed convection, dissipation and Joule heating are considered. Appropriate similarity transformations are implemented to get the required coupled ODEs system. The obtained system is tackled for series solutions by homotopy method. Graphs are constructed to analyze the impact of different flow parameters on entropy number, nanoparticle volume concentration, temperature and velocity fields. Total entropy generation rate is calculated via various flow variables. It is noticed from obtained results that entropy number depend up thermal irreversibility, viscous dissipation and Joule heating irreversibility and concentration irreversibility. Decreasing behavior of concentration is witnessed for higher estimations of chemical reaction variable. Entropy number is more for higher Hartmann number, Weissenberg number and chemical reaction variable while contrast behavior is noted for Bejan number.     

Hydromagnetic Carreau Nanoliquid in Frames of Dissipation and Activation Energy

The novel characteristics of magnetic field and entropy generation in mixed convective flow of Carreau fluid towards a stretched surface are investigated.Buongiornio nanoliquid model consists of thermophoresis and Brownian movement aspects is opted for analysis.Energy expression is modeled subject to thermal radiation and viscous dissipation phenomenon.Concentration by zero mass flux condition is implemented.Consideration of chemical reaction and activation energy characterizes the mass transfer mechanism.Total entropy generation rate and Bejan number is formulated.The utilization of transformation variables reduces the PDEs into non-linear ODEs.The obtained nonlinear complex problems are computed numerically through Shooting scheme.The impact of involved variables like local Weissenberg number,magnetic parameter,thermal radiation parameter,Brownian motion parameter,thermophoresis parameter,buoyancy ratio parameter,mixed convection parameter,Prandtl parameter,Eckert number,Schmidt number,non-dimensional activation energy parameter,chemical reaction parameter,Brinkman number,dimensionless concentration ratio variable,diffusive variable and dimensionless temperature ratio variable on velocity,temperature,nanoparticles concentration,entropy generation,Bejan number,surface drag force and heat transfer rate are examined through graphs and tables.     

Vibration analysis of a circular arch with variable cross-section using differential transformation and generalized differential quadrature

Vibration analysis of circular arches is an important subject in mechanics due to its various applications. In particular, circular arches with variable cross-section have been widely used to satisfy modern architectural and structural requirements. Recently, the generalized differential quadrature method (GDQM) and differential transformation method (DTM) were proposed by Shu and Zhou, respectively. In this study, GDQM and DTM are applied to vibration analysis of circular arches with variable cross-section. The governing equation of motion is derived and the non-dimensional natural frequencies are obtained for various boundary conditions. The concepts of differential transformation and generalized differential quadrature are briefly introduced. The results obtained by these methods are compared with previously published works. GDQM and DTM showed fast convergence, accuracy and validity in solving the vibration problem for circular arches with variable cross-sections.     

New approximate solution for time-fractional coupled KdV equations by generalised differential transform method

In this paper,the generalised two-dimensional differential transform method (DTM) of solving the time-fractional coupled KdV equations is proposed.The fractional derivative is described in the Caputo sense.The presented method is a numerical method based on the generalised Taylor series expansion which constructs an analytical solution in the form of a polynomial.An illustrative example shows that the generalised two-dimensional DTM is effective for the coupled equations.     

Entropy generation applications in flow of viscoelastic nanofluid past a lubricated disk in presence of nonlinear thermal radiation and Joule heating

Entropy generation is the loss of energy in thermodynamical systems due to resistive forces,diffusion processes, radiation effects and chemical reactions. The main aim of this research is to address entropy generation due to magnetic field, nonlinear thermal radiation, viscous dissipation, thermal diffusion and nonlinear chemical reaction in the transport of viscoelastic fluid in the vicinity of a stagnation point over a lubricated disk. The conservation laws of mass and momentum along with the first law of thermodynamics and Fick's law are used to discuss the flow, heat and mass transfer, while the second law of thermodynamics is used to analyze the entropy and irreversibility. The numbers of independent variables in the modeled set of nonlinear partial differential equations are reduced using similarity variables and the resulting system is numerically approximated using the Keller box method. The effects of thermophoresis,Brownian motion and the magnetic parameter on temperature are presented for lubricated and rough disks. The local Nusselt and Sherwood numbers are documented for both linear and nonlinear thermal radiation and lubricated and rough disks. Graphical representations of the entropy generation number and Bejan number for various parameters are also shown for lubricated and rough disks. The concentration of nanoparticles at the lubricated surface reduces with the magnetic parameter and Brownian motion. The entropy generation declines for thermophoresis diffusion and Brownian motion when lubrication effects are dominant. It is concluded that both entropy generation and the magnitude of the Bejan number increase in the presence of slip. The current results present many applications in the lubrication phenomenon,heating processes, cooling of devices, thermal engineering, energy production, extrusion processes etc.     

Entropy generation minimization and statistical declaration with probable error for skin friction coefficient and Nusselt number

Main emphasis of present work is to analyze the novel feature of entropy generation in MHD nanomaterial flow between two rotating disks. Heat transfer process is explored in the presence of Joule heating and thermal radiation. Tiwari–Das nanofluid model is employed in mathematical modeling. Aluminum oxide and copper water nanoparticles are accounted. Statistical declaration and probable error for problem accuracy are computed. Total entropy generation subject to Bejan number is scrutinized. Suitable variables are utilized to transform nonlinear PDEs to ordinary ones. Convergent series solutions are computed. Zeroth and mth order problems are discussed for stability analysis. The impact of physical flow variables like Reynolds number, magnetic parameter, porosity parameter, stretching parameter, rotational parameter, radiation parameter, Eckert number, suction injection parameter, Brinkman number and temperature ratio parameter on velocities, temperature, total entropy generation and Bejan number are examined and discussed through graphs. Velocity and thermal gradients at the surface of disks are computed.     

Analytic solution for Telegraph equation by differential transform method

In this article differential transform method (DTM) is considered to solve Telegraph equation. This method is a powerful tool for solving large amount of problems (Zhou (1986) [1], Chen and Ho (1999) [2], Jang et al. (2001) [3], Kangalgil and Ayaz (2009) [4], Ravi Kanth and Aruna (2009) [5], Arikoglu and Ozkol (2007) [6]). Using differential transform method, it is possible to find the exact solution or a closed approximate solution of an equation. To illustrate the ability and reliability of the method some examples are provided. The results reveal that the method is very effective and simple.     

A novel approach for solving fractional Fisher equation using differential transform method

In the present paper, an analytic solution of nonlinear fractional Fisher equation is deduced with the help of the powerful differential transform method (DTM). To illustrate the method, two examples have been prepared. The method for this equation has led to an exact solution. The reliability, simplicity and cost-effectiveness of the method are confirmed by applying this method on different forms of functional equations.     

Rapid communication: Permeability of hydrogen in two-dimensional graphene and hexagonal boron nitride sheets

This paper concerns an application to optimal energy by incorporating thermal equilibrium on MHD-generalised non-Newtonian fluid model with melting heat effect. Highly nonlinear system of partial differential equations is simplified to a nonlinear system using boundary layer approach and similarity transformations. Numerical solutions of velocity and temperature profile are obtained by using shooting method. The contribution of entropy generation is appraised on thermal and fluid velocities. Physical features of relevant parameters have been discussed by plotting graphs and tables. Some noteworthy findings are: Prandtl number, power law index and Weissenberg number contribute in lowering mass boundary layer thickness and entropy effect and enlarging thermal boundary layer thickness. However, an increasing mass boundary layer effect is only due to melting heat parameter. Moreover, thermal boundary layers have same trend for all parameters, i.e., temperature enhances with increase in values of significant parameters. Similarly, Hartman and Weissenberg numbers enhance Bejan number.     

Entropy generation (irreversibility) associated with flow and heat transport mechanism in Sisko nanomaterial

Here a novel applications of entropy generation optimization is presented for nonlinear Sisko nanomaterial flow by rotating stretchable disk. Flow is examined in the absence of magnetohydrodynamics and Joule heating. Total irreversibility rate (entropy generation rate) is investigated for different flow parameters. Heat source/sink and viscous dissipation effects are considered. Impacts of Brownian motion and thermophoresis on irreversibility have been analyzed. Governing flow equations comprise momentum, energy and nanoparticle concentration. Von Karman's similarity variables are implemented for reduction of PDEs into ODEs. Homotopy analysis technique for series solutions is implemented. Attention is given to the irreversibility. The impacts of different flow parameters on velocity, nanoparticle concentration, temperature and irreversibility rate are graphically presented. From obtained results it is examined that irreversibility rate enhances for larger estimation of Brinkman number and diffusion. Furthermore it is also examined that temperature and nanoparticle concentration show contrast behavior through Prandtl number and Brownian motion.     

Discrete transfer method applied to radiative transfer in a variable refractive index semitransparent medium

Application of the discrete transfer method (DTM) has been extended to the analysis of radiative heat transfer in a variable refractive index participating medium. To validate the DTM formulation, radiative heat transfer in an absorbing, emitting and isotropically scattering planar medium was considered. The participating medium was assumed to be in radiative equilibrium. For both constant and variable refractive indices of the medium, the DTM results were compared with those available in the literature. The DTM was found to provide accurate results.     

Exact valence bond entanglement entropy and probability distribution in the XXX spin chain and the potts model

We determine exactly the probability distribution of the number N_(c) of valence bonds connecting a subsystem of length L>1 to the rest of the system in the ground state of the XXX antiferromagnetic spin chain. This provides, in particular, the asymptotic behavior of the valence-bond entanglement entropy S_(VB)=N_(c)ln2=4ln2/pi(2)lnL disproving a recent conjecture that this should be related with the von Neumann entropy, and thus equal to 1/3lnL. Our results generalize to the Q-state Potts model.     

Analysing the structure of the optical path length of a supersonic mixing layer by using wavelet methods

The nano-particle-based planar laser scattering(NPLS) technique is used to measure the density distribution in the supersonic mixing layer of the convective Mach number 0.12,and the optical path difference(OPL),which is quite crucial for the study of aero-optics,is obtained by post processing.Based on the high spatiotemporal resolutions of the NPLS,the structure of the OPL is analysed using wavelet methods.The coherent structures of the OPL are extracted using three methods,including the methods of thresholding the coefficients of the orthogonal wavelet transform and the wavelet packet transform,and preserving a number of wavelet packet coefficients with the largest amplitudes determined by the entropy dimension.Their performances are compared,and the method using the wavelet packet is the best.Based on the viewpoint of multifractals,we study the OPL by the wavelet transform maxima method(WTMM),and the result indicates that its scaling behaviour is evident.     

Annular convective-radiative fins with a step change in thickness,and temperature-dependent thermal conductivity and heat transfer coefficient

This article investigates the thermal performance of convective-radiative annular fins with a step reduction in local cross section (SRC). The thermal conductivity of the fin’s material is assumed to be a linear function of temperature, and heat transfer coefficient is assumed to be a power-law function of surface temperature. Moreover, nonzero convection and radiation sink temperatures are included in the mathematical model of the energy equation. The well-known differential transformation method (DTM) is used to derive the analytical solution. An exact analytical solution for a special case is derived to prove the validity of the obtained results from the DTM. The model provided here is a more realistic representation of SRC annular fins in actual engineering practices. Effects of many parameters such as conduction-convection parameters, conduction-radiation parameter and sink temperature, and also some parameters which deal with step fins such as thickness parameter and dimensionless parameter describing the position of junction in the fin on the temperature distribution of both thin and thick sections of the fin are investigated. It is believed that the obtained results will facilitate the design and performance evaluation of SRC annular fins.     

换热器的效能与熵产分析

本文给出了以进口冷热流体温度、热容量流比和传热单元数表示的顺流、逆流及两边混合的叉流换热器熵产数的分析表达式，研究了这三类换热器熵产数随热容量流比及传热单元数变化的规律，给出了由于不平衡流动和传热面积有限产生的熵产数的表达式。分析表明，在进、出口温度均匀条件下换热器效能与熵产数之间存在一一对应的关系，效能与熵产数一样，所表征的是换热器热力学第二定律的完善程度。     

蒙特卡洛法、离散传递法中的假散射与射线效应

本文构造了激光平行入射二维半透明介质的物理模型,研究了蒙特卡洛法、离散传递法中的假散射。通过分析 边界净热流研究了蒙特卡洛法、离散传递法中的射线效应。计算分析表明:蒙特卡洛法、离散传递法不存在假散射。蒙特 卡洛法不存在射线效应,离散传递法存在射线效应。在离散传递法中,随着射线数的增加,射线效应逐渐减少。     

Entropy production in the flow over a swirling stretchable cylinder

In the present work, the entropy generation due to the heat transfer and fluid friction irreversibility is investigated numerically for a three-dimensional flow induced by rotating and stretching motion of a cylinder. The isothermal boundary conditions are taken into account for the heat transfer analysis. The similarity transformations are utilized to convert the governing partial differential equations to ordinary differential equations. Resulting nonlinear differential equations are solved using a numerical scheme. Expressions for the entropy generation number, the Nusselt number and the Bejan number are obtained and discussed through graphs for various physical parameters. An analysis has been made to compare the heat transfer irreversibility with fluid friction irreversibility using the expression of the Bejan number. It is found that the surface is a durable source of irreversibility and the curvature of cylinder is to enhance the fluid friction irreversibility.     

Entropy generation analysis for peristaltically driven flow of hybrid nanofluid

Present study investigates entropy generation analysis for peristaltic motion of hybrid nanofluid. Hybrid nanofluid is composed of iron-oxide and copper nanoparticles suspended in water. Effects of Hall current, Ohmic heating and mixed convection are taken into account. Governing equations are simplified by utilizing lubrication approach. The numerical solutions for resulting system of differential equations are obtained with the aid of Shooting method. Attention has been given to the analysis of hybrid nanoparticles, Hall parameter and Grashoff number on entropy generation, heat transfer rate, velocity profile and pressure gradient. Outcomes reveal that insertion of nanoparticles decreases the temperature of hybrid nanofluid. It is found that increase in Hall parameter reduces the heat transfer rate at wall. Increment in Hall parameter reduces the entropy generation. Velocity and pressure gradient increases by enhancing Grashoff number. It is believed that the present flow model can prove useful in improving the efficiency of similar thermodynamical systems.     

Electro-osmotic nanofluid flow in a curved microchannel

Biological mechanisms offer significant improvement in the efficiency of next generation energy systems. Motivated by new developments in distensible pumping systems, ionic electro-kinetic manipulation and nanoscale liquids (”nanofluids”), in the present study a mathematical model is developed to simulate the entropy generation and electro-osmotic transport of nanofluids in a curved deformable microchannel driven by peristaltic transport. Both thermal and species (nano-particle) buoyancy effects are included and Soret and Dufour cross-diffusion effects. The appropriate conservation equations are normalized with scaled variables and the resulting dimensionless nonlinear boundary value problem is solved in a transformed coordinate system. Simplification of the mathematics is achieved via lubrication approximations and low zeta potential (Debye Hückel linearization). The effects of various parameters, i.e. electro-osmotic velocity, EDL (electrical double layer) thickness and zeta potential ratio on velocity profile and temperature profiles are computed. The effects of Brinkman number (viscous heating parameter) and Joule (electrical field heating) parameter on nano-particle concentration profiles are also simulated. The micro-channel curvature effects on the nanofluid flow characteristics and thermal characteristics are also computed. Furthermore, streamline patterns, temperature contours, nano-particles concentration contours and entropy generation rate contours are plotted for various curvature parameters. Results indicate that the curvature of the channel and electro-osmotic body force influence strongly the sources of entropy generation rate. The study finds applications in bio-inspired electro-osmotic nanofluid pumping in microscale energy applications.     

Applicability of minimum entropy generation methodto optimizing thermodynamic cycles

Entropy generation is often used as a figure of merit in thermodynamic cycle optimizations. In this paper, it is shown that the applicability of the minimum entropy generation method to optimizing output power is conditional. The minimum entropy generation rate and the minimum entropy generation number do not correspond to the maximum output power when the total heat into the system of interest is not prescribed. For the cycles whose working medium is heated or cooled by streams with prescribed inlet temperatures and prescribed heat capacity flow rates, it is theoretically proved that both the minimum entropy generation rate and the minimum entropy generation number correspond to the maximum output power when the virtual entropy generation induced by dumping the used streams into the environment is considered. However, the minimum principle of entropy generation is not tenable in the case that the virtual entropy generation is not included, because the total heat into the system of interest is not fixed. An irreversible Carnot cycle and an irreversible Brayton cycle are analysed. The minimum entropy generation rate and the minimum entropy generation number do not correspond to the maximum output power if the heat into the system of interest is not prescribed.