Alkyl-thiol Langmuir films on the surface of liquid mercury

The coverage dependent phase behavior of monolayers of alkyl thiols (CH3(CH2)(n-1)SH, denoted as CnSH) on mercury was studied for chain lengths 9 相似文献   

Structure of mercaptobiphenyl monolayers on mercury

The molecular-scale structure and phase behavior of single-component Langmuir films of 4'-methyl-4-mercaptobiphenyl (MMB) and 4'-perfluoromethyl-4-mercaptobiphenyl (FMMB) on mercury were studied using surface tensiometry, grazing incidence X-ray diffraction, and X-ray reflectivity. At low coverages, a condensed but in-plane disordered single layer of surface-parallel molecules is found for both compounds. At high coverages, both compounds exhibit in-plane-ordered phases of standing-up molecules. For MMB, the biphenyl core dominates the structure, yielding a centered-rectangular unit cell with an area A(x) of 21.8 A(2)/molecule, with molecules tilted by approximately 14 degrees from the surface normal in the nearest-neighbor direction, and a coherence length xi of >1000 A for the crystalline domains. For FMMB, the perfluoromethyl group dominates the structure, yielding a hexagonal unit cell with untilted molecules, an area A(x) of 24.2 A(2)/molecule, and a much smaller xi of approximately 110 A. The structure is discussed in comparison with self-assembled monolayers of MMB on crystalline Au(111) and similar-length alkanethiolate SAMs on Au(111) and on mercury. The differences in the structure are discussed and traced to the differences in the substrate's surface structure, and in the molecular cross section and rigidity.     

Formation and electrochemical characterization of 6-thioguanosine monolayers on the mercury surface

The interfacial and electrochemical behavior of 6-thioguanosine-6-thioguanine riboside (6TGR)-on a hanging mercury drop electrode was studied with ac and cyclic voltammetry in a solution of 0.1 M Na(2)SO(4) and 0.01 M sodium acetate buffer at pH 4.3. A self-assembled monolayer (SAM) of chemisorbed 6TGR molecules formed under determined adsorption conditions was characterized. A low-density monolayer of chemisorbed 6TGR molecules and a condensed monolayer of physisorbed ones, which are successively formed by reduction of the SAM, were also studied.     

Modern physicochemical research on Langmuir monolayers

Recent developments in characterising Langmuir monolayers of a variety of film-forming materials and employing several physicochemical techniques are reviewed. The extension of the LB method to non-amphiphilic substances, especially macromolecular systems, has increased the need of a thorough understanding of Langmuir film properties, which requires characterising techniques that provide complementary information. Since there is vast literature in the subject, only selected examples are given of results that illustrate the potential of the techniques discussed.     

Structure, wrinkling, and reversibility of Langmuir monolayers of gold nanoparticles

The assembly of nanoparticles into large, two-dimensional structures provides a route for the exploration of collective phenomena among mesoscopic building blocks. We characterize the structure of Langmuir monolayers of dodecanethiol-ligated gold nanoparticles with in situ optical microscopy and X-ray scattering. The interparticle spacing increases with thiol concentration and does not depend on surface pressure. The correlation lengths of the Langmuir monolayer crystalline domains are on the order of five to six particle diameters. Further compression of the monolayers causes wrinkling; however, we find that wrinkled monolayers with excess thiol can relax to an unwrinkled state following a reduction of surface pressure. A theoretical model based on van der Waals attraction and tunable steric repulsion is adopted to explain this reversibility.     

Flow-induced patterning of Langmuir monolayers

Insoluble monolayers on water have been patterned at the macroscopic scale (i.e., at the centimeter scale of the flow apparatus) as well as the mesoscopic scale (i.e., down to the micron scale resolvable via optical microscopy). The macroscopic patterning at the air/water interface results from a hydrodynamic instability leading to a steadily precessing flow pattern. The velocity field is measured, and the associated shear stress at the interface is shown to be locally amplified by the flow pattern. The resulting hydrodynamic effects on two different monolayer systems are explored: (1) the pattern in a model monolayer consisting of micron-size, surface-bound particles is visualized to show that the particles are concentrated into isolated regions of converging flow with high shear, and (2) Brewster angle microscopy of a Langmuir monolayer (vitamin K1) shows not only that the monolayer is patterned at the macroscopic scale but also that the localized high-shear flow further patterns the monolayer at the mesoscale.     

Surfactant monolayers on a clean mercury surface: Apparatus and experiments

A Langmuir trough for studying monolayers on a mercury surface was constructed usingT. Smith's design. The surfactant (long-chain alkyl-trimethylammonium compounds) in aqueous solution were spread on a clean mercury surface in an atmosphere of helium, and the surface pressure re-areaA and thickness of surface filmd-areaA curves were obtained. The-A curves were characterized by the appearance of multiple inflection points and plateaus, being explained as stepwise dense surface packing of molecules, and the formation of multilayers by film compression with long axes of molecules lying flat on the mercury surface.     

Langmuir monolayers of bent-core molecules

A systematic study of five different, symmetric bent-core liquid crystals in Langmuir thin films at the air/water interface is presented. Both the end chains (siloxane vs hydrocarbon) and the core (more or less amphiphilic) are varied, to allow an exploration of different possible layer structures at the interface. The characterization includes systematic surface pressure isotherms, Brewster angle microscopy, and surface potential measurements. The properties of these layers are strongly dependent on the individual type of molecule: the molecules with amphiphilic end chains lie quite flat on the surface, while the molecules with hydrophobic end chains construct multilayer structures. In both cases, the three-dimensional collapse structure is reversible.     

Fatty acid Langmuir films on liquid mercury: X-ray and surface tension studies

The structure and phase behavior of liquid-mercury-supported molecular films of fatty acids (CH3(CH2)n-2COOH, denoted CnOOH) were studied for molecular lengths 7 < or = n < or = 24, by surface tensiometry and X-ray methods. Two qualitatively different film structures were found, depending on coverage. For high coverage, the film consists of a monolayer of roughly surface-normal molecules, showing a pressure-dependent sequence of structures similar, though not identical, to that of the corresponding water-supported Langmuir films. At low coverage, phases consisting of surface-parallel molecules are found, not observed on the aqueous subphases employed to date. In this range, a two-dimensional (2D) gas followed by a single and, for 14 < or = n < or = 24, also by a double layer of surface-parallel molecules is found as coverage is increased. Depending on chain length, the flat-lying phases have a crystalline 2D-ordered, a smectic-like 1D-ordered, or a disordered in-plane structure consisting of molecular dimers. The structure and thermodynamics of the films are discussed.     

Self-assembled monolayers on mercury probed in a modified surface force apparatus

Self-assembled monolayers (SAMs) of three thiol compounds formed on mercury are investigated by a combination of cyclic voltammetry, electrocapillary curves, and a novel method of measuring electrical double-layer properties. The last method involves a modified surface force apparatus in which a flat mica surface is pressed down toward a fixed mercury drop held beneath it, while both are immersed in aqueous electrolyte solution. Optical interference measurements are made of the mica-mercury separation as a function of electrical potential applied to the mercury, which yields information on the double-layer interaction between the two surfaces. Mercury is decorated by SAMs of 11-mercapto-1-undecanoic acid, which is shown to bring negative charge to the mercury/aqueous interface due to dissociation of the carboxylic acid groups; 11-mercapto-1-undecanol, which although it is uncharged changes the dipole potential of the interface; and 1-undecanethiol, which likewise changes the dipole potential, but by a different amount. The difference between the changes in dipole potential (90 mV) can be related to the different terminal groups of these two SAMs, -CH3 compared to -OH, that are in contact with the aqueous phase.     

Thermodynamics of the liquid states of Langmuir monolayers

The liquid states and the liquid-liquid equilibrium of surfactant molecules forming an interphase between air and water have been considered using Monte Carlo computer simulations. Specifically, the expanded and compressed liquid phases observed for surfactant molecules were characterized as a function of pressure and temperature. Simple modified beadlike potentials were implemented in order to describe the interparticle forces between the hydrophobic and hydrophilic portions of surfactant molecules at the air/water interface. A simulation box was defined such that the monolayer was exposed to an externally applied lateral pressure in a modified isothermal-isobaric ensemble, whereas the water bath was modeled in a canonical ensemble. The simulation resembles the experimental setup used to measure lateral pressure (Pi) versus area isotherms obtained with Langmuir troughs. The applied lateral pressure-surface area phase diagram clearly showed the coexistence of the expanded and compressed liquid phases within certain temperature and pressure ranges. Distribution functions of distances and enthalpies for the monolayer were computed to clearly identify each liquid phase and the coexistence region.     

Effect of molecular surface packing on the enzymatic activity modulation of an anchored protein on phospholipid Langmuir monolayers

The catalytic activity of a glycosylphosphatidylinositol (GPI)-anchored alkaline phosphatase has been studied in Langmuir phospholipid monolayers at different surface pressures. The enzyme substrate, p-nitrophenyl phosphate, was injected into the subphase of mixed enzyme/lipid Langmuir monolayers. Its hydrolysis product was followed by monitoring the absorbance at 410 nm in situ in the monolayer subphase of the Langmuir trough. Several surface pressures, corresponding to different molecular surface densities, were attained by lateral compression of the monolayers. The morphology of the monolayers, observed by fluorescence microscopy, showed three different types of domains owing to the heterogeneous partition of the enzyme within the mixed enzyme/lipid film. The catalytic activity was modulated by the enzyme surface density, and it increased until a pressure of 18 mN/m was reached, but it decreased significantly when the equilibrium in-plane elasticity (surface compressional modulus) increased more noticeably, resulting in alterations in the interface morphology. A model for the modulation of the enzyme orientation and catalytic activity by lipid/enzyme surface morphology and enzyme surface packing at the air/liquid interface is proposed. The results might have an important impact on the comprehension of the enzymatic activity regulation of GPI-anchored proteins in biomembranes.     

Chiral recognition of dipeptides in Langmuir monolayers

The recognition of the enantiomeric couples of ditryptophan in Langmuir films of N-hexadecanoyl-l-proline was investigated by surface pressure–area (π–A) isotherm measurements and Brewster angle microscopy experiments. The π–A isotherms relative to the films including the enantiomeric dipeptides show small differences whereas an evident enantiodiscrimination is observed by Brewster angle microscopy images.     

Interfacial polymerisation of anilinium at Langmuir monolayers

Anilinium is strongly adsorbed at monolayers of the phospholipid L-alpha-dimyristoylphosphatidic acid (DMPA) and hexadecanesulfonic acid (HDSA) at the air-water interface, and undergoes chemical polymerisation under conditions where bulk polymerisation does not occur.     

Langmuir monolayers of a photoisomerizable macrocycle surfactant

An amphiphilic photoisomerizable macrocycle has been prepared that forms stable Langmuir monolayers at the air-water interface. The hydrophilic core of the molecule switches between closed and open isomers upon irradiation by the appropriate wavelengths of light. Isotherm measurements, Brewster angle microscope images, and atomic force micrographs (of transferred Langmuir-Blodgett films) suggest a phase transition between a face-on to a tilted edge-on molecular orientation as a function of surface concentration. In the face-on phase, in situ photoisomerization results in a reversible increase in surface pressure due to greater molecular crowding in the open configuration.     

Pattern formation and morphology evolution in Langmuir monolayers

We present a study of how patterns formed by Langmuir monolayer domains of a stable phase, usually solid or liquid condensed, propagate into a metastable one, usually liquid expanded. During this propagation, the interface between the two phases moves as the metastable phase is transformed into the more stable one. The interface becomes unstable and forms patterns as a result of the competition between a chemical potential gradient that destabilizes the interface on one hand and line tension that stabilizes the interface on the other. During domain growth, we found a morphology transition from tip splitting to side branching; doublons were also found. These morphological features were observed with Brewster angle microscopy in three different monolayers at the water/air interface: dioctadecylamine, ethyl palmitate, and ethyl stearate. In addition, we observed the onset of the instability in round domains when an abrupt lateral pressure jump is made on the monolayer. Frequency histograms of unstable wavelengths are consistent with the linear-instability dispersion relation of classical free-boundary models. For the case of dendritic morphologies, we measured the radius of the dendrite tip as a function of the dendrite length as well as the spacing of the side branches along a dendrite. Finally, a possible explanation of why Langmuir monolayers present this kind of nonequilibrium growth patterns is presented. In the steady state, the growth behavior is determined by Laplace's equation in the particle density with specific boundary conditions. These equations are equivalent to those used in the theory of morphology diagrams for two-dimensional diffusional growth, where morphological transitions of the kind observed here have been predicted.     

Langmuir and Langmuir-Blodgett monolayers of molecular tweezers and clips

Molecular clips and tweezers are able to selectively bind electron-deficient aromatic and aliphatic substrates. By means of pressure-area isotherms and Brewster angle microscopy (BAM), the self-association process and phase behavior of dimethylene-bridged molecular clips and tetramethylene-bridged molecular tweezers each substituted with two acetoxy groups as polar head groups were investigated. In a series of experiments, we observed that the molecular surface area of the clips and tweezers only depended on the skeletal structure and not on the polar groups. The measured areas agreed with the effective molecular diameters of the molecules if the aromatic side walls of the clips or tweezers were assumed to be aligned perpendicularly to the water surface. We compared the phase behavior of the pure molecular clips and tweezers with that of the host-guest complexes of these molecules, which were formed with 1,2,4,5-tetracyanobenzene (TCNB) as the guest molecule. For the clips with a central benzene (I) and naphthalene spacer unit (II), the complex formation with TCNB had no measurable influence on the phase diagrams of the films. We observed, however, a dramatic difference in the BAM images and pi-A isotherms between the pure molecular tweezers III and its complex with TCNB (TCNB@III). In addition to the pi-A isotherms, we used the surface potential (V)-area (A) isotherms to compare the pure tweezers III with the corresponding complex (TCNB@III). There was a strong difference in the maximum surface potential value for the pure tweezers (450 mV) and that for the complex (300 mV). In additional experiments, we prepared LB layers of such molecules, which were investigated by fluorescence spectroscopy. In comparison to the pure tweezers III, a luminescence emission of charge-transfer (CT) origin was observed for the host-guest complex (TCNB@III) fixed on the solid substrate. It turned out that the spectra were in good agreement with the results observed in chloroform solution.     

Miscibility and segregated structures in mixed Langmuir monolayers

The phase behavior and morphology of segregated structures are considered for mixed Langmuir monolayers, which comprise a type of supramolecular polymer having a complex internal structure mixed with a long chain fatty acid. We fabricated two different series of mixed monolayers from a polyglutamate (PG) copolymer having 30% octadecyl ester side chains and 70% methyl ester side chains and fatty acids. These mixed monolayers deposited on a solid substrate were studied by pressure-area diagram measurements, X-ray analysis, and atomic force microscopy. Stearic acid (STA) and hexacosanoic acid (HCA) with alkyl chain lengths of 17 and 25 carbon atoms, respectively, were used as low molecular weight components. For the mixture PG:STA, where the length of the STA molecules is comparable to the length of the PG side chains, we observed the formation of partially miscible monolayers. These mixtures exhibit a nanometer scale domain morphology formed by the STA molecules dissolved in the outer shell of the PG monolayer. In contrast, for the PG:HCA mixture we observed a strong tendency for microphase separation and the formation of well-defined submicron segregated structures in the monolayers. Lateral compression of the mixed monolayers to a point close to the collapse pressure promotes microphase separation in both types of mixed monolayers with the formation of anisotropic surface morphology and oriented domains.     

Mixed Langmuir monolayers of gramicidin A and fluorinated alcohols

Mixed monolayers of gramicidin A (GA) and three alcohols, differing in the degree of fluorination, namely C18OH, F18OH, and F8H10OH have been investigated by means of: surface manometry (pi-A isotherms) and Brewster angle microscopy (BAM) aiming at finding appropriate molecules for incorporating gramicidin A for a biosensor design. Our results proved that only the semifluorinated alcohol is appropriate material for this purpose since it forms miscible and homogeneous monolayers with GA within the whole concentration range. The experimental results have been supported by the calculations of van der Waals energy profiles using the Insight II program. Both the hydrogenated and perfluorinated alcohols were found to aggregate at higher surface pressures, which exclude their application for gramicidin-based biosensor construction.     

Influence of temperature and composition on the mesoscopic textures of azobenzene Langmuir monolayers

The monolayer behavior of the azobenzene derivative 8Az3COOH is shown to depend significatively on temperature and on the isomeric (trans-cis) composition. For pure trans monolayers, important temperature effects in the mesoscopic organization (as revealed by means of Brewster angle microscopy, BAM) are observed for the low-pressure phase in the studied temperature range (10 degrees C < T < 40 degrees C). Mixed trans-cis monolayers show that both isomers are virtually immiscible, leading to a phase segregation into birefringent, nearly pure trans droplets surrounded by an isotropic, nearly pure cis matrix. The existence of well-defined anchoring conditions at the droplet boundaries leads to highly symmetric textures, amenable of quantitative BAM image analysis, which helps to better visualize mesoscopic changes induced by variations in the control parameters (temperature, surface pressure or irradiation).