Photochemical Targeting of Mitochondria to Overcome Chemoresistance in Ovarian Cancer †

Ovarian cancer is the most lethal gynecologic malignancy with a stubborn mortality rate of ~65%. The persistent failure of multiline chemotherapy, and significant tumor heterogeneity, has made it challenging to improve outcomes. A target of increasing interest is the mitochondrion because of its essential role in critical cellular functions, and the significance of metabolic adaptation in chemoresistance. This review describes mitochondrial processes, including metabolic reprogramming, mitochondrial transfer and mitochondrial dynamics in ovarian cancer progression and chemoresistance. The effect of malignant ascites, or excess peritoneal fluid, on mitochondrial function is discussed. The role of photodynamic therapy (PDT) in overcoming mitochondria-mediated resistance is presented. PDT, a photochemistry-based modality, involves the light-based activation of a photosensitizer leading to the production of short-lived reactive molecular species and spatiotemporally confined photodamage to nearby organelles and biological targets. The consequential effects range from subcytotoxic priming of target cells for increased sensitivity to subsequent treatments, such as chemotherapy, to direct cell killing. This review discusses how PDT-based approaches can address key limitations of current treatments. Specifically, an overview of the mechanisms by which PDT alters mitochondrial function, and a summary of preclinical advancements and clinical PDT experience in ovarian cancer are provided.     

Tantalum Electrodes Modified With Well-Aligned Carbon Nanotube–Au Nanoparticles: Application to the Highly Sensitive Electrochemical Determination of Cefazolin

Carbon nanotube/nanoparticle hybrid materials have been proven to exhibit high electrocatalytic activity suggesting broad potential applications in the field of electroanalysis. For the first time, modification of Ta electrode with aligned multi-walled carbon nanotubes/Au nanoparticles introduced for the sensitive determination of the antibiotic drug, cefazolin (CFZ). The electrochemical response characteristics of the modified electrode toward CFZ were investigated by means of cyclic and linear sweep voltammetry. The modified electrode showed an efficient catalytic activity for the reduction of CFZ, leading to a remarkable decrease in reduction overpotential and a significant increase of peak current. Under optimum conditions, the highly sensitive modified electrode showed a wide linear range from 50 pM to 50 μM with a sufficiently low detection limit of 1?±?0.01 pM (S/N?=?3). The results indicated that the prepared electrode presents suitable characteristics in terms of sensitivity (458.2?±?2.6 μAcm^?2/μM), accuracy, repeatability (RSD of 1.8 %), reproducibility (RSD of 2.9 %), stability (14 days), and good catalytic activity in physiological conditions. The method was successfully applied for accurate determination of trace amounts of CFZ in pharmaceutical and clinical preparations without the necessity for samples pretreatment or any time-consuming extraction or evaporation steps prior to the analysis.     

Electrocatalytic Response of Dopamine at an Iron Nanoparticles–Nafion–Modified Carbon Paste Electrode

Abstract

Iron nanoparticles (INPs) were dispersed in Nafion solution to obtain a homogeneous INP-Nafion dispersion, and then a drop of this dispersion was cast on the surface of a carbon paste electrode (CPE) to fabricate an INP-Nafion-modified electrode. The electrochemical behavior of dopamine (DA) at this modified electrode was studied by cyclic voltammetry in a pH 7.0 Britton-Robinson (B-R) buffer solution. The result showed that the modified CPE exhibited an obvious electrocatalytical response toward DA, with the anodic and cathodic peak potentials shifted negatively and positively respectively, and great enhance of the peak currents at the scan rate of 100 mV s^?1. The effects of carbon paste constitution, amount of the dispersion, pH, and scan rate were investigated. Under the optimum experimental conditions, the peak currents determined by differential pulse voltammetry showed an excellent linear relationship with DA concentration in the range from 10 to 110 µM with the detection limit of 3.3 µM. In addition, ascorbic acid and some other possible interferents did not interfere with the voltammetric sensing of DA, and this method also had good stability and reproducibility.     

Immobilization of Horseradish Peroxidase on a Biocompatible Titania Layer–Modified Gold Electrode for the Detection of Hydrogen Peroxide

Abstract

A procedure for fabricating an enzyme electrode has been described based on the effective immobilization of horseradish peroxidase to an ultrathin titania layer–modified self‐assembled gold electrode. The resulting electrode exhibits excellent electrocatalytical activity to hydrogen peroxide in the presence of hydroquinone as a mediator. The analytical conditions were studied in detail by using an amperometric method. Under the optimized conditions, a detection limit of 7.1×10^?7 mol l^?1 and a linear response to hydrogen peroxide that ranged from 1×10^?6 mol l^?1 to 7.6×10^?4 mol l^?1 were obtained. The reproducibility and stability were examined with satisfactory results.     

Electrochemical Behavior and Application of Pirarubicin at Gold Nanoparticles–Modified Indium Tin Oxide Electrode

Abstract

A new type of gold nanoparticles–attached indium tin oxide electrode was made. By SEM and EDS, the as‐prepared gold nanoparticles–modified ITO electrode was characterized. This modified electrode has been used for the determination of pirarubicin (THP) in urine by cyclic voltammetry. Compared to a bare ITO electrode, the modified electrode exhibited a marked enhancement in the current response. Liner calibration curves are obtained in the range 5×10^?9mol/L～1.5×10^?6 mol/L with a detection limit of 1×10^?9 mol/L. The percentage of the recoveries ranged from 99.3% to 106.3%. The practical analytic utility of the method is illustrated by quantitative determination of THP in urine.     

Magnetic Solid Phase Extraction Based on Modified Magnetite Nanoparticles Coupled with Dispersive Liquid–Liquid Microextraction as an Efficient Method for Simultaneous Extraction of Hydrophobic and Hydrophilic Drugs

In this work, surfactant-coated Fe₃O₄@decanoic acid nanoparticles was synthesized as a viable nanosorbent for coextraction of drugs with different polarities (hydrophobic, hydrophilic). To reach desirable enrichment factors, efficient clean-up and low limits of detection (LODs), the method was combined with dispersive liquid–liquid microextraction (DLLME). The coupling of these extraction methods with GC-FID detection was applied to simultaneous extraction and quantification of venlafaxine (VLF) as a hydrophilic model drug and desipramine (DESI) and clomipramine (CLO) as hydrophobic model drugs in urine samples. The effect of sample pH, nanosorbent amount, sorption time, surfactant concentration, eluent type, eluent volume, salt content, elution time in magnetic solid phase extraction step and extraction solvent and its volume along with sample pH in DLLME step were optimized. Under the selected conditions, linearity was achieved within the range of 5–5000 µg L^?1. The LOD values were obtained in the range of 1.5–3.0 µg L^?1 for DESI, 1.2–2.5 µg L^?1 for VLF and 2.0–4.0 µg L^?1 for CLO, respectively. The percent of extraction recoveries and relative standard deviations (n?=?5) were in the range of 82.4–95.9 and 6.1 for DESI, 60.5–92.8 and 6.9 for VLF and 57.2–58.0 and 5.5 for CLO, respectively. Ultimately, the applicability of the new method was successfully confirmed by the extraction and quantification of DESI, VLF and CLO from human urine samples.     

Fabrication of N-(Amino-Ethyl)-Amino-Propyl Functionalized Magnetite Nanoparticles for Oil–Water Separation of Wastewater From Tertiary Oil Recovery

N-(amino-ethyl)-amino-propyl trimethoxy silane (AEAPTMS) is used to modify Fe₃O₄ with a one-pot coprecipitation method. Powder X-ray diffraction measurements show the spinel structure of magnetite nanoparticles. A high positive charge of +33.96 mV was obtained on the surfaces of modified magnetic nanoparticles, with the diameter ranging from 6.5 to 22.5 nm. The modified Fe₃O₄ was first applied to the treatment of wastewater from tertiary oil recovery. The obtained results indicated that the oil removal rate increased with the dosage of modified Fe₃O₄ and slightly increased with the separation time. The mechanism of modified Fe₃O₄ toward wastewater from tertiary oil recovery was attributed to the electrostatic interaction between negatively charged microemulsion oil in wastewater and the positively charged surfaces of magnetic nanoparticles.     

Dynamics of PEGylated–Dextran–Spermine Nanoparticles for Gene Delivery to Leukemic Cells

Leukemic cells are hard-to-transfect cell lines. Many transfection reagents which can provide high gene transfer efficiency in common adherent cell lines are not effective to transfect established blood cell lines or primary leukemic cells. This study aims to examine a new class of cationic polymer non-viral vector, PEGylated–dextran–spermine (PEG-D-SPM), to determine its ability to transfect the leukemic cells. Here, the optimal conditions of the complex preparation (PEG-D-SPM/plasmid DNA (pDNA)) were examined. Different weight-mixing (w/w) ratios of PEG-D-SPM/pDNA complex were prepared to obtain an ideal mixing ratio to protect encapsulated pDNA from DNase degradation and to determine the optimal transfection efficiency of the complex. Strong complexation between polymer and pDNA in agarose gel electrophoresis and protection of pDNA from DNase were detected at ratios from 25 to 15. Highest gene expression was detected at w/w ratio of 18 in HL60 and K562 cells. However, gene expression from both leukemic cell lines was lower than the control MCF-7 cells. The cytotoxicity of PEG-D-SPM/pDNA complex at the most optimal mixing ratios was tested in HL60 and K562 cells using MTS assay and the results showed that the PEG-D-SPM/pDNA complex had no cytotoxic effect on these cell lines. Spherical shape and nano-nature of PEG-D-SPM/pDNA complex at ratio 18 was observed using transmission electron microscopy. As PEG-D-SPM showed modest transfection efficiency in the leukemic cell lines, we conclude that further work is needed to improve the delivery efficiency of the PEG-D-SPM.     

Analysis of Steroid Hormones in Water Using Palmitate-Coated Magnetite Nanoparticles Solid-Phase Extraction and Gas Chromatography–Tandem Mass Spectrometry

A new extractive method based on magnetic solid–phase extraction using palmitate-coated magnetite nanoparticles coupled with gas chromatography-tandem mass spectrometry was developed for the extraction of estrone, androstenedione and progesterone hormones from water. The amount of nanoparticles and extraction time were optimized applying an experimental design to estimate simultaneously their influence on the recoveries. Results showed that the extraction efficiency was highly affected by the addition of salt and acetonitrile was the solvent used to elute the analytes from the nanoparticles. Derivatization via enolization of ketone group was carried out in the extract for the simultaneous derivatization of hydroxyl and ketone groups of steroid hormones previously to their chromatographic analysis. The extraction efficiencies of the nanoparticles were studied spiking at four concentration levels and recoveries from 94.6 to 109.7 % were obtained. The limits of detection ranged from 4 to 8 ng L^?1. The developed method provided a preconcentration factor of 100. The present work shows that palmitate-coated magnetite nanoparticles have good applicability for the extraction of natural estrogenic hormones that could be pollutants in real water samples.     

Analysis of Steroid Hormones in Water Using Palmitate-Coated Magnetite Nanoparticles Solid-Phase Extraction and Gas Chromatography–Tandem Mass Spectrometry

A new extractive method based on magnetic solid–phase extraction using palmitate-coated magnetite nanoparticles coupled with gas chromatography-tandem mass spectrometry was developed for the extraction of estrone, androstenedione and progesterone hormones from water. The amount of nanoparticles and extraction time were optimized applying an experimental design to estimate simultaneously their influence on the recoveries. Results showed that the extraction efficiency was highly affected by the addition of salt and acetonitrile was the solvent used to elute the analytes from the nanoparticles. Derivatization via enolization of ketone group was carried out in the extract for the simultaneous derivatization of hydroxyl and ketone groups of steroid hormones previously to their chromatographic analysis. The extraction efficiencies of the nanoparticles were studied spiking at four concentration levels and recoveries from 94.6 to 109.7 % were obtained. The limits of detection ranged from 4 to 8 ng L⁻¹. The developed method provided a preconcentration factor of 100. The present work shows that palmitate-coated magnetite nanoparticles have good applicability for the extraction of natural estrogenic hormones that could be pollutants in real water samples.

     

Efficient Immobilization of Porcine Pancreatic α-Amylase on Amino-Functionalized Magnetite Nanoparticles: Characterization and Stability Evaluation of the Immobilized Enzyme

The potential of the modified magnetic nanoparticles for covalent immobilization of porcine pancreatic α-amylase has been investigated. The synthesis and immobilization processes were simple and fast. The co-precipitation method was used for synthesis of magnetic iron oxide (Fe₃O₄) nanoparticles (NPs) which were subsequently coated with silica through sol–gel reaction. The amino-functionalized NPs were prepared by treating silica-coated NPs with 3-aminopropyltriethoxysilane followed by covalent immobilization of α-amylase by glutaraldehyde. The optimum enzyme concentration and incubation time for immobilization reaction were 150 mg and 4 h, respectively. Upon this immobilization, the α-amylase retained more than 50 % of its initial specific activity. The optimum pH for maximal catalytic activity of the immobilized enzyme was 6.5 at 45 °C. The kinetic studies on the immobilized enzyme and its free counterpart revealed an acceptable change of K_m and V_max. The Km values were found as 4 and 2.5 mM for free and immobilized enzymes, respectively. The V_max values for the free and immobilized enzymes were calculated as 1.75 and 1.03 μmol mg^?1 min^?1, in order, when starch was used as the substrate. A quick separation of immobilized amylase from reaction mixture was achieved when a magnetically active support was applied. In comparison to the free enzyme, the immobilized enzyme was thermally stable and was reusable for 9 cycles while retaining 68 % of its initial activity.     

Palladium(II)-η3-Allyl Complexes Bearing N-Trifluoromethyl N-Heterocyclic Carbenes: A New Generation of Anticancer Agents that Restrain the Growth of High-Grade Serous Ovarian Cancer Tumoroids

The first palladium organometallic compounds bearing N-trifluoromethyl N-heterocyclic carbenes have been synthesized. These η³-allyl complexes are potent antiproliferative agents against different cancer lines (for the most part, IC₅₀ values fall in the range 0.02–0.5 μm ). By choosing 1,3,5-triaza-7-phosphaadamantane (PTA) as co-ligand, we can improve the selectivity toward tumor cells, whereas the introduction of 2-methyl substituents generally reduces the antitumor activity slightly. A series of biochemical assays, aimed at defining the cellular targets of these palladium complexes, has shown that mitochondria are damaged before DNA, thus revealing a behavior substantially different from that of cisplatin and its derivatives. We assume that the specific mechanism of action of these organometallic compounds involves nucleophilic attack on the η³-allyl fragment. The effectiveness of a representative complex, 4 c , was verified on ovarian cancer tumoroids derived from patients. The results are promising: unlike carboplatin, our compound turned out to be very active and showed a low toxicity toward normal liver organoids.     

Selective Acceptorless Dehydrogenation of Primary Amines to Imines by Core–Shell Cobalt Nanoparticles

Core–shell nanocatalysts are attractive due to their versatility and stability. Here, we describe cobalt nanoparticles encapsulated within graphitic shells prepared via the pyrolysis of a cationic poly-ionic liquid (PIL) with a cobalt(II) chloride anion. The resulting material has a core–shell structure that displays excellent activity and selectivity in the self-dehydrogenation and hetero-dehydrogenation of primary amines to their corresponding imines. Furthermore, the catalyst exhibits excellent activity in the synthesis of secondary imines from substrates with various reducible functional groups (C=C, C≡C and C≡N) and amino acid derivatives.     

Controlled Fluxes of Silicon Nanoparticles to a Substrate in Pulsed Radio-Frequency Argon–Silane Plasmas

It has been hypothesized that high-energy impact of very small silicon nanoparticles on a substrate may lead to epitaxial growth of silicon films at low substrate temperature. A possible means for producing such energetic nanoparticle fluxes involves pulsing an RF silane-containing plasma, and applying a positive DC bias to the substrate during the afterglow phase of each pulse so as to collect the negatively charged particles generated during the RF power on phase. We here report numerical modeling to provide a preliminary assessment of the feasibility of this scheme. The system modeled is a parallel-plate capacitively-coupled RF argon–silane plasma at pressures around 100 mTorr. Simulation results indicate that it is possible to achieve a periodic steady state in which each pulse delivers a controlled flux of nanoparticles to the biased substrate, that average particle sizes can be kept below 2–3 nm, that impact energies of the negatively-charged nanoparticles that are attracted by the applied bias can be maintained in the ~1 eV/atom range thought to be conducive to epitaxial growth without causing film damage, and that the volume fraction of neutral nanoparticles that deposit by low-velocity diffusion can be kept well below 1 %. The effects of several operating parameters are explored, including RF voltage, pressure, the value of the applied DC bias, and RF power on and off time during each pulse.     

Photoinduced Electron Transfer from the Inorganic Core to the Organic Shell of Hybrid Core–Shell Nanoparticles: Impedance Spectroscopy

In hybrid core–shell nanoparticles with inorganic nanocrystals in the core and organic molecules in the shell, photoinduced electron transfer occurs from the core to the shell. This leads to exciton dissociation through an ultrafast electron-transfer process that results in charge separation and finally photocurrent in the external circuit in devices based on such core–shell nanoparticles. In this work, we have fabricated and characterized sandwiched devices based on a series of core–shell systems. From impedance spectroscopy, we have observed that photoinduced charge separation in core–shell systems is associated with a decrease in the device resistance and an increase in the dielectric constant of the active material. In the series of core–shell systems, we have observed a one-to-one correlation between the photoinduced electron-transfer process and the changes in resistive and dielectric parameters upon illumination.     

Modular Medical Imaging Agents Based on Azide–Alkyne Huisgen Cycloadditions: Synthesis and Pre-Clinical Evaluation of 18F-Labeled PSMA-Tracers for Prostate Cancer Imaging

Since the seminal contribution of Rolf Huisgen to develop the [3+2] cycloaddition of 1,3-dipolar compounds, its azide–alkyne variant has established itself as the key step in numerous organic syntheses and bioorthogonal processes in materials science and chemical biology. In the present study, the copper(I)-catalyzed azide–alkyne cycloaddition was applied for the development of a modular molecular platform for medical imaging of the prostate-specific membrane antigen (PSMA), using positron emission tomography. This process is shown from molecular design, through synthesis automation and in vitro studies, all the way to pre-clinical in vivo evaluation of fluorine-18- labeled PSMA-targeting ‘F-PSMA-MIC’ radiotracers (t_1/2=109.7 min). Pre-clinical data indicate that the modular PSMA-scaffold has similar binding affinity and imaging properties to the clinically used [⁶⁸Ga]PSMA-11. Furthermore, we demonstrated that targeting the arene-binding in PSMA, facilitated through the [3+2]cycloaddition, can improve binding affinity, which was rationalized by molecular modeling. The here presented PSMA-binding scaffold potentially facilitates easy coupling to other medical imaging moieties, enabling future developments of new modular imaging agents.     

Effective Utilization of Carbohydrate in Corncob to Synthesize Furfuralcohol by Chemical–Enzymatic Catalysis in Toluene–Water Media

In this study, carbohydrates (cellulose plus hemicellulose) in corncob were effectively converted furfuralcohol (FOL) via chemical–enzymatic catalysis in a one-pot manner. After corncob (2.5 g, dry weight) was pretreated with 0.5 wt% oxalic acid, the obtained corncob-derived xylose (19.8 g/L xylose) could be converted to furfural at 60.1% yield with solid acid catalyst SO₄ ^2?/SnO₂-attapulgite (3.6 wt% catalyst loading) in the water–toluene (3:1, v/v) at 170 °C for 20 min. Moreover, the oxalic acid-pretreated corncob residue (1.152 g, dry weight) was enzymatically hydrolyzed to 0.902 g glucose and 0.202 g arabinose. Using the corncob-derived glucose (1.0 mM glucose/mM furfural) as cosubstrate, the furfural liquor (48.3 mM furfural) was successfully biotransformed to FOL by recombinant Escherichia coli CCZU-A13 cells harboring an NADH-dependent reductase (SsCR) in the water-toluene (4:1, v/v) under the optimum conditions (50 mM PEG-6000, 0.2 mM Zn²⁺, 0.1 g wet cells/mL, 30 °C, pH 6.5). After the bioreduction for 2 h, FAL was completely converted to FOL. The FOL yield was obtained at 0.11 g FOL/g corncob. Clearly, this one-pot synthesis strategy shows high potential application for the effective synthesis of FOL.     

Organotrihalide Complexes: α-Nucleophiles and Effective Oxidizing Agents in Decomposition Reactions of Organophosphorus Compounds in Water and Surfactant Micelles

We have studied the nucleophilic and oxidative reactivity of the system HOBr/BrO^–, in water and in the presence of different types of surfactants, relative to 4-nitrophenyldiethylphosphate, 4-nitrophenyl- 4´-toluenesulfonate (nucleophilic substitution), and 4-nitrophenol (oxidation). As the source of "active" bromine, we used organotrihalide complexes. The micellar effects of the surfactants in nucleophilic substitution reactions are adequately described within both a pseudophase distribution model and an ion-exchange model. Just transferring the reaction from water to micelles of a cationic surfactant leads to an increase in the observed rates of reaction of the BrO^– ion with esters by up to a factor of 20-30 and an increase in the rate for reaction of HOBr with nitrophenol by up to a factor of 5, while the HOBr/BrO^– system is one of the most effective systems in decomposition of organophosphorus compounds.     

Ratio Design of Docetaxel/Quercetin Co-Loading-to-Nanocarrier: Synthesis of PCL–PEG–PCL Copolymer,Study of Drug Release Kinetic and Growth Inhibition of Human Breast Cancer (MCF-7) Cell Line

Russian Journal of Applied Chemistry - The present study aimed to design PCL–PEG–PCL copolymer as novel nanocarrier for co-loading of docetaxel (DTX) and quercetin (Qu) drugs and...     

Coupling of Propane with CO2 to Propylene Catalyzed by V–Fe Modified KIT-6 Zeolites

Catalysis Surveys from Asia - Propane dehydrogenation to propene is an endothermic reaction and CO2 hydrogenation to light olefins is an exothermic reaction. Using the CO2 hydrogenation reaction to...