Chemically modified kapok fiber for fast adsorption of Pb2+, Cd2+, Cu2+ from aqueous solution

Kapok fiber, a natural hollow fiber with thin shell and large cavity, has rarely been used as adsorbent for heavy metal ions. In this paper, kapok fibers were modified with diethylenetriamine pentaacetic acid (DTPA) after hydrophilicity treatment. The adsorption behavior of the resultant kapok-DTPA influenced by pH, adsorption time and initial concentration of metal ion was investigated. The results demonstrate that adsorption equilibrium was reached within 2 min for Pb²⁺ and Cd²⁺. Adsorption kinetics showed that the adsorption rate was well fitted by pseudo-second-order rate model. The adsorption isotherms were studied, and the best fit was obtained in the Langmuir model. The maximum adsorption capacities of kapok-DTPA were 310.6 mg g^?1 for Pb²⁺, 163.7 mg g^?1 for Cd²⁺, 101.0 mg g^?1 for Cu²⁺, respectively. After eight desorption and re-adsorption loops, the lost adsorption capacities for Pb²⁺ and Cu²⁺ were less than 10 %. Because of the large specific area derived from the hollow fiber structure, kapok-DTPA exhibited much better adsorption capacity compared with many other reported adsorbents based on natural materials.     

Preconcentration of Pb2+ by iron oxide/amino-functionalized silica core–shell magnetic nanoparticles as a novel solid-phase extraction adsorbent and its determination by flame atomic absorption spectrometry

The use of iron oxide/amino-functionalized silica core–shell magnetic nanoparticles for preconcentration of Pb²⁺ followed by its consecutive atomic absorption spectrometry determination is described. Effects of various operating variables, namely, solution pH, initial Pb²⁺ concentration, contact time, adsorbent dosage, sample volume, concentration and volume of desorbing solution, and co-existing ions on solid-phase extraction (SPE) of Pb²⁺ were studied by batch equilibrium technique. The experimental adsorption data were well fitted to the Langmuir isotherm model. The Langmuir adsorption capacity and equilibrium time were found to be 100 mg g^?1 and 20 min, respectively. The adsorption data were also fitted to kinetic pseudo-first-order and pseudo-second-order models. Kinetic studies showed that the adsorption followed pseudo-second-order model. Under the optimal SPE conditions, the enrichment factor, detection limit and relative standard deviation for determination of Pb²⁺ were found to be 211, 1 μg L^?1, and 3.7 % for 50 μg L^?1, respectively. The proposed method was successfully applied to the determination of lead in a real sample with satisfactory results.     

SBA-15/Metformin as a novel sorbent combined with surfactant-assisted dispersive liquid–liquid microextraction (SA-DLLME) for highly sensitive determination of Pb,Cd and Ni in food and environmental samples

This paper established a new, rapid and sensitive method for the ultra-trace determination of lead, cadmium and nickel in food and environmental samples preconcentrated by dispersive solid-phase extraction (DSPE) combined with surfactant-assisted dispersive liquid–liquid microextraction (SA-DLLME) prior to graphite furnace atomic absorption spectrometry. SBA-15/Met was synthesized and used as a new efficient sorbent for the extraction of metal ions in DSPE. It was characterized by TEM and TGA techniques. After DSPE step, stripped metal elements were complexed with dithizone, and then, the complexes were extracted into carbon tetrachloride by using SA-DLLME. A conventional nonionic surfactant, triton X-100 was used as a disperser agent. Under the optimized conditions, the limit of quantifications was found to be 2.5 ng L^?1 for Pb²⁺, Cd²⁺ and 5.0 ng L^?1 for Ni²⁺. The limits of detection were 1.5 ng L^?1 for Ni²⁺ and 0.75 ng L^?1 for Pb²⁺ and Cd²⁺, with enrichment factor of 1650. The optimized method exhibited a good precision level with relative standard deviations (RSDs%) values of 4.9, 5.2 and 5.0% for 1 μg L^?1 Pb²⁺, Cd²⁺ and Ni²⁺, respectively (n = 7). Application of the proposed method to the analysis of fish-certified reference material produced results that were in good agreement with the certified values.     

Solid-phase extraction of Pb2+ ion from environmental samples onto L-AC-Ag-NP by flame atomic absorption spectrometry (FAAS)

The development of a solid-phase extraction (SPE) procedure for the pre-concentration of trace amounts of Pb²⁺ ion on 2-furan-2-yl-1-furan-2-ylmethyl-1H-benzoimidazole loaded on activated carbon modified with silver nanoparticles (L-AC-Ag-NP) was presented. The metal ion retained on the sorbent was quantitatively determined via complexation with the ligand. The complexed metal ion was efficiently eluted using 10 mL of 4 mol L^?1 sulphuric acid in 10 w/v% acetone. The influences of the analytical parameters, including pH, amounts of the ligand and the solid phase, eluent conditions and sample volume, on the recoveries of the metal ion were optimised. Using the optimised parameters, the linear response of the SPE method for Pb²⁺ ion were in the ranges of 0.2–160 µg L^?1, and the detection limit for Pb²⁺ ion was 0.034 µg L^?1. The proposed method exhibits a pre-concentration factor (PF) of 80 and an enhancement factor of 30 for Pb²⁺ ion. The presented results demonstrate the successful application of the proposed method for the determination of Pb²⁺ ion in some real samples with high recoveries (>93%) and reasonable relative standard deviation (RSD < 2%).     

A new sensitive and selective sensor for heavy metal ions based on tannin extracted from the skin of Punica granatum L

This article presents the development of a sensor made from a gold electrode and a receiving polymeric membrane based on tannin extracted from the skin of Punica granatum. L (pomegranate) for real-time detection of heavy metals in a hydrous environment. The basic principle of this device is the complexing (chelating) of metal ions through the adjacent hydroxyl groups contained in the chemical structures of the tannins. The electrochemical characterisation was performed by using electrochemical impedance spectroscopy and square wave voltammetry. Other morphological and structural analyses were performed by using Fourier transform infrared spectroscopy and atomic-force microscopy. The results obtained showed the high sensitivity of the developed device (detection limits of 6.35 × 10^?9 g L^?1 for Cu²⁺, 1.1 × 10^?8 g L^?1 for Cd²⁺ and 2 × 10^?7 g L^?1 for Pb²⁺) and the possibility of simultaneously detecting several heavy metals, each one in a highly selective manner with highly acceptable response time (48s).     

Removal of Lead (II) Ions by Poly(2‐octadecyl butanedioic acid): Isothermal and Kinetic Studies

Poly(2‐octadecyl‐butanedioic acid), prepared from polyanhydride PA‐18, possesses novel heavy metal adsorption characteristics. The adsorption capacity of this water insoluble polymer for lead (II) was substantially higher than other heterogeneous adsorbants and is equivalent to those obtained with homogeneous sorbants. The polymer exhibited pseudo‐second‐order kinetics and nearly complete adsorption of lead occurred in 15 min with initial lead (II) concentrations greater than 100 mg · L^?1. Adsorptive behavior was accurately predicted by the Dubinin‐Radushkevich isotherm model. The mean free energy of adsorption of lead (II) onto poly(2‐octadecyl‐butanedioic acid) was determined to be 31.6 kJ · mol^?1, suggesting an ion exchange component to the adsorption mechanism. Gibb's free energy values for this process indicate that it is spontaneous. Adsorption was relatively independent of pH in the range of 3–5, due to the utilization of the sodium carboxylate form of the chelating groups, and was not influenced by high Na⁺ concentration and moderate concentrations (up to 200 mg · L^?1) of Ca⁺². Lead (II) solutions containing 2000 mg · L^?1 Ca⁺² did reduce the adsorption of 2000 mg · L^?1 lead (II) by 28%.     

Assessing effects of pH,metal ion and natural organic matter on identification and determination of reduced glutathione by cathodic stripping voltammetry

The effects of pH, metal ions (i.e. Cu²⁺, Cd²⁺, Pb²⁺ and Zn²⁺) and natural organic matter (i.e. Suwannee River natural organic matter standard [SRNOM]) on determination of thiol (i.e. reduced glutathione [GSH]) by cathodic stripping voltammetry were evaluated. pH was the most critical parameter to influence GSH voltammogram (i.e. peak shape, position and height). In presence of Cu and Cd, secondary peaks were found at [metal]/GSH > 1 due to formation of GSH complexes at pH = 8.0 (Cu and Cd) and 2.5 (Cu only). On the other hand, Pb showed negligible influence on GSH voltammogram at pH 8.0 and 2.5 within [Pb]/[GSH] = 0.01–2.0. Zn significantly reduced GSH peak height at pH 2.5 at [Zn]/[GSH] = 0.01–2.0. SRNOM peak significantly overlapped with GSH peak at pH 8.0 and [SRNOM] > 1 mg L^?1 but was clearly separated from the GSH peak at pH 2.5. However, at pH 2.5, the presence of metal ions and/or SRNOM significantly underestimated GSH concentration (recovery = 21–69%), likely due to metal complexation with GSH and/or SRNOM adsorption onto Hg electrode. The effects of metal ions were minimised by the addition of EDTA. The interference induced by SRNOM adsorption was reduced as the [SRNOM] was reduced to 1 mg L^?1 and the recovery was improved to 98%.     

Synthesis and characterisation of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) Zr(IV) monothiophosphate composite cation exchanger: analytical application as lead ion selective membrane electrode

A Pb²⁺ ion selective membrane electrode based on poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) Zr(IV) monothiophosphate composite cation exchange material was fabricated using solution casting method. The effect of membrane composition on the proton exchange capacity was investigated by using varying amounts of electroactive material. The membrane with 250 mg of electroactive material and 10 µL of plasticiser exhibited higher proton conductivity. The optimised membrane composition was used for the fabrication of ion selective membrane electrode which exhibited typical Nernstian response towards Pb²⁺ ions in the concentration range 20.70 gL^?1–20.7 µgL^?1 (1 × 10^–1–1 × 10^–7 mol L^?1) with a sub-Nernstian slope of 27.429 mV per decade change in Pb²⁺ ion concentration. The response time of the electrode under study for Pb²⁺ ions was found to be 11 s and the electrode can be used for 120 days without any considerable divergence in response potential. It can also be successfully used in the pH range from 3.0 to 6.5. It was found selective for Pb²⁺ ions in the presence of various monovalent, divalent and trivalent interfering metal ions. It was also employed as an indicator electrode in the potentiometric titration of Pb²⁺ ions using ethylenediaminetetraacetic acid, disodium salt, as a titrant.     

In-Capillary Derivatization and Preconcentration for CE of Metal Ions as Their Phenanthroline Complexes

A simple and automated method involving in-capillary derivatization and in-capillary preconcentration was developed for the simultaneous determination of metal ions by capillary zone electrophoresis. Fe(II), Zn(II), Cu(II) and Cd(II) were derivatized using 1,10-phenanthroline as the derivatizing agent. The in-capillary derivatization and in-capillary preconcentration via large volume injection were performed sequentially as follows: 60 mmol L^?1 1,10-phenanthroline was first hydrodynamically injected (0.2 psi) for 2 s; metal ions were introduced by hydrodynamic injection (0.5 psi) for 60 s; 0.2 mol L^?1 acetate pH 5.5 containing 20 % methanol was used as the running buffer. Four metal ions can be determined within 8 min using 16 kV. The resulting preconcentration factors were in the range 12–21. Good linearity was obtained for concentrations of 0.1–8.0 mg L^?1 (r ² > 0.990). The mean recoveries of the metal ions evaluated by fortification of wine samples were in the range 90–102 %. The limits of detection ranged from 0.05 to 0.2 mg L^?1. The proposed method can be applied for directly determining metal ions in wine samples.     

In Vitro Propagation and Assessment of the Genetic Fidelity of Musa acuminata (AAA) cv. Vaibalhla Derived from Immature Male Flowers

An efficient in vitro propagation method has been developed for the first time for Musa acuminata (AAA) cv. Vaibalhla, an economically important banana cultivar of Mizoram, India. Immature male flowers were used as explants. Murashige and Skoog’s (MS) medium supplemented with plant growth regulators (PGRs) were used for the regeneration process. Out of different PGR combinations, MS medium supplemented with 2 mg L^?1 6-benzylaminopurine (BAP) + 0.5 mg L^?1 α-naphthalene acetic acid (NAA) was optimal for production of white bud-like structures (WBLS). On this medium, explants produced the highest number of buds per explant (4.30). The highest percentage (77.77) and number (3.51) of shoot formation from each explants was observed in MS medium supplemented with 2 mg L^?1 kinetin + 0.5 mg L^?1 NAA. While MS medium supplemented with a combination of 2 mg L^?1 BAP + 0.5 mg L^?1 NAA showed the maximum shoot length (14.44 cm). Rooting efficiency of the shoots was highest in the MS basal medium without any PGRs. The plantlets were hardened successfully in the greenhouse with 96 % survival rate. Random amplified polymorphic DNA (RAPD) and inter-simple sequence repeat (ISSR) markers were employed to assess the genetic stability of in vitro regenerated plantlets of M. acuminata (AAA) cv. Vaibalhla. Eight RAPD and 8 ISSR primers were successfully used for the analysis from the 40 RAPD and 30 ISSR primers screened initially. The amplified products were monomorphic across all the regenerated plants and were similar to the mother plant. The present standardised protocol will find application in mass production, conservation and genetic transformation studies of this commercially important banana.     

Electroanalytical detection of heavy metals using metallophthalocyanine and silica-coated iron oxide composites

The monitoring of heavy metal ions particularly in water is important in safeguarding the environment and humans from the toxic effects these metal ions pose. This work describes the synthesis, characterization and electrocatalytic properties of silica-coated iron oxide nanoparticles (Si-NP) in the presence of cobalt or iron phthalocyanines (MPc) for heavy metal (HM) detection. TEM, XRD, XPS and VSM confirmed the successful synthesis of Si-NP with an average diameter of 12.07 nm. The electrochemical sensing properties of MPc/Si-NP-modified glassy carbon electrodes (GCE) were assessed for HM detection. Differential pulse anodic stripping voltammetry (DPASV) studies indicated detection limits that compared positively with the literature. The FePc/Si-NP composite showed the lowest detection limits (S/N?=?3) of 3.66, 11.56, 2.28, 4.54 μg L^?1 for arsenic (As), cadmium (Cd), mercury (Hg) and lead (Pb), respectively. A linear working range of 10–100 μg L^?1 was obtained for As³⁺, Hg²⁺ and Pb²⁺ ions while it was between 20 and 100 μg L^?1 for Cd²⁺ ions. Both composites displayed reproducible signals for the simultaneous detection of the HMs for ten consecutive scans. These composites offer a cheap and simplistic sensing device for HM analysis.     

Removal of lead from aqueous solutions by adsorption with surface precipitation

An activated carbon from Coconut (Cocos nucifera) shells was prepared by physical activation with carbon dioxide and water vapor. The activated carbon obtained has a surface area of 1058 m² g^?1 and such a high micropore volume of 0.49 cm³ g^?1. This carbon was studied for the removal of lead from water. Sorption studies were performed at 30 °C, at different pH and adsorbent doses, in batch mode. Lead precipitation was observed on the surface of the activated carbon. Maximum adsorption occurred at pH 9 for an adsorbent dose of 2 g L^?1. Kinetic studies, at the initial concentration of 150 mg L^?1 of lead, pH 5 and an adsorbent dose of 1 g L^?1, yielded an equilibrium time of 50 h for this activated carbon. The kinetic data were modeled with the pseudo first order, the pseudo second order and the Bangham models. The pseudo second order model fitted the data well. The sorption rate constant (7 × 10^?4 mol^?1 Kg s^?1) and the maximum amount of lead adsorbed (0.23 mol kg^?1) are quite good compared to the data found in literature. Sorption equilibrium studies were conducted in a concentration range of lead from 0 to 150 mg L^?1. In an aqueous lead solution with an initial concentration of 30 mg L^?1, at pH 5, adsorbent dose 1 g L^?1, activated Coconut shell carbon removed at equilibrium 100 % of the heavy metal. The equilibrium data were modeled with the Langmuir and Freundlich equations, of which the former gave the best fit. The Langmuir constants Q_{max eq} (0.23 mol kg^?1) and K_L (487667 L mol^?1) are in good agreement with literature. XPS studies identified adsorbed species as lead carbonates and/or lead oxalates and precipitates as lead oxide and/or lead hydroxide on the activated carbon surface. The Coconut shell activated carbon is a very efficient carbon due to its high surface area, to the presence of many micropores on its surface and to the presence surface groups like hydroxyls promoting adsorption in the porous system and lead crystal precipitation on the activated carbon surface.     

Resolution of Racemic Ofloxacin Based on Co-Technology of Bubble Fractionation and Extraction

A method of bubble fractionation, with the help of solvent extraction, was developed for the resolution of racemic ofloxacin (rac OFLX). In this method, dibenzoyl-L-tartaric (L-DBTA), di-(2-ethylhexyl) phosphoric acid (D2EHPA) and sodium lauryl sulfate (SDS) were used as chiral collector, co-extractant and foamer, respectively. Several important parameters influencing the resolution performances, such as pH in aqueous phase, concentration of OFLX, concentration of L-DBTA, concentration of SDS and volume ratio of D2EHPA to n-octanol in solution, were investigated. The optimal resolution conditions were obtained with the aqueous phase pH 7, volume ratio of D2EHPA to n-octanol 6/14 in organic phase, concentration of SDS 0.42 mg mL^?1, concentration of OFLX 1.67 mg mL^?1, and concentration of L-DBTA 0.11 g mL^?1. Under the optimal extraction conditions, the enantiomeric excess value (e.e.%) was 60.08% and the enantioselectivity (??) was 5.58. It was found that the capacity of enantioselective separation can be greatly improved by the co-technology.     

Isolation of a Methylobacterium organophilium strain, and its application to a methanol biosensor

A methanol-utilizing strain (ME25) using methanol (MeOH) as the sole carbon source has been isolated from methane-generating pits. ME25 was identified as Methylobacterium organophilium by its physiological characteristics and 16SrDNA sequence. A MeOH biosensor was then developed by immobilizing ME25 along with sensor for dissolved oxygen (O₂). Its response is based on the depletion of O₂ following oxidation of MeOH by the bacteria. The decrease in O₂ is linearly related to the MeOH concentration in the range from 1.6 mg·L^?1 to 4800 mg·L^?1 and the detection limit for MeOH is 0.27 mg·L^?1. The response time of the biosensor is around 20 min.     

Facile and Simultaneous Stripping Determination of Zinc,Cadmium and Lead on Disposable Multiwalled Carbon Nanotubes Modified Screen‐Printed Electrode

Screen‐printed electrodes (SPEs) are cheap and disposable. But their application for heavy metal detection is limited due to the low sensitivity and poor selectivity. Here we report the ultrasensitive and simultaneous determination of Zn²⁺, Cd²⁺ and Pb²⁺ on a multiwalled carbon nanotubes and Nafion composite modified SPE with in situ plated bismuth film (MWCNTs/NA/Bi/SPE). The linear curves range from 0.5–100 µg L^?1 for Zn²⁺ and 0.5–80 µg L^?1 for Cd²⁺. Uniquely, the linear curve for Pb²⁺ ranges from 0.05–100 µg L^?1 with a detection limit of 0.01 µg L^?1. The practical application was verified in real samples with satisfactory results.     

A simple highly sensitive and selective turn-on fluorescent chemosensor for the recognition of Pb2+

A simple highly sensitive and selective turn-on fluorescent chemosensor L based on bis-Schiff-base for Pb²⁺ ions was synthesized and characterized by spectroscopic techniques. L having high binding affinity towards Pb²⁺ ions of 2.10 × 10⁴ M^?1 selectively detects Pb²⁺ ions with almost no interference among various competitive ions by a 11-fold fluorescent enhancement in CH₃CN/H₂O (95:5, v/v) solution over a wide pH range. Moreover, sensor L displayed a lower detection limit of 3.80 × 10^?7 M, which is low enough for sensing sub-millimolar concentration of Pb²⁺ encountered practically.     

Analysis of bioaccessible concentration of trace elements in plant based edible materials by INAA and ICPMS methods

The total metal concentration and bioaccessible concentration of Cr, Mn, Fe, Cu, Zn, Se in Momordica charantia, Asparagus racemosus, Terminalia arjuna and Syzyzium cumini were measured by instrumental neutron activation analysis and by inductively coupled plasma mass spectrometry analysis (ICP-MS). The bioaccessible concentrations were determined in the gastrointestinal digest obtained after treating dried powdered samples sequentially in gastric and intestinal fluid of porcine origin at physiological conditions. The bioaccessible concentration of Fe was in the range of 58–67 mg kg^?1, Mn was 10.2–14.6 mg kg^?1, Cu was 3.7–4.8 mg kg^?1 and Zn was 10.6–18.4 mg kg^?1, were within the safety limits set for vegetable food stuff set by Joint FAO/WHO. The bioaccessibility of Zn, an essential element, was high (40–50 %) in M. charantia and in S. cumini. In addition, the total metal contents and bioaccessible concentration of Ni, Se, Cd and Pb in these samples were measured by ICP-MS. The total Cd content in S. cumini (2.6 ± 0.2 mg kg^?1) and its bioaccessible concentration (0.6 mg kg^?1) were strikingly high as compared to the other samples. Though total Hg contents were determined by ICP-MS, but their bioaccessible concentrations were below the detection limit (0.036 mg kg^?1).     

Application of Physicochemical Treatment Allows Reutilization of <Emphasis Type="Italic">Arthrospira platensis</Emphasis> Exhausted Medium

Since cultivations of Arthrospira platensis have a high water demand, it is necessary to develop treatment methods for reusing the exhausted medium that may prevent environmental problems and obtaining useful biomass. The exhausted Schlösser medium obtained from A. platensis batch cultivation in bench-scale mini-tanks was treated by varying concentrations of different coagulants, ferric chloride (6, 10, and 14 mg L^?1) or ferric sulfate (15, 25, and 35 mg L^?1) and powdered activated carbon (PAC, 30 and 50 mg L^?1). Such treated effluent was restored with NaNO₃ and reused in new cultivations of A. platensis performed in Erlenmeyer flasks. Reusing media through the cultivation of A. platensis showed satisfactory results, particularly in the medium treated with ferric chloride and PAC. The maximum cell concentration obtained in the flasks was 1093 mg L^?1, which corresponded to the medium treated with ferric chloride (6 mg L^?1) and PAC (30 mg L^?1). This cellular growth was higher than in the medium treated with ferric sulfate and PAC, in which values of maximum cell concentration did not exceed 796 mg L^?1. The cultures in the media after treatment did not modify the biomass composition. Thus, combined coagulation/adsorption processes, commonly used in water treatment processes, can be efficient and viable for treating exhausted medium of A. platensis, allowing the production of such biomass with the reduction of production cost and saving water.     

Sensitive Stripping Determination of Cadmium(II) and Lead(II) on Disposable Graphene Modified Screen‐Printed Electrode

In the present work, a sensitive, facile and disposable sensing platform for trace analysis of heavy metal ions was developed at the Bi modified graphene‐poly(sodium 4‐styrenesulfonate) composite film screen printed electrode (GR/PSS/Bi/SPE). The GR/PSS/Bi/SPE improved sensitivity and linearity due to the functionalization of graphene with negatively charged PSS providing more absorbing sites. The detection limit of the GR/PSS/Bi/SPE is found to be 0.042 µg L^?1 for Cd²⁺ and 0.089 µg L^?1 for Pb²⁺ with linear responses of Cd²⁺ and Pb²⁺ in the range of 0.5–120 µg L^?1. Finally, the practical application was confirmed in real water with satisfactory results.     

A Novel Sensitive Method for the Determination of Cadmium and Lead Based on Magneto‐Voltammetry

Abstract

A novel method for the ultratrace determination of Cd²⁺ and Pb²⁺ based on magneto‐voltammetry was developed. In the presence of a low strength magnetic field of 0.6 T, square wave stripping voltammetry (SWSV) of Cd²⁺ and Pb²⁺ was performed in this determination. A high concentration of redox species Fe³⁺ was added to the analytes to generate a large cathodic current during the preconcentration step. A large Lorentz force arising from the flux of net current through the magnetic field resulted in convective solution flow due to magnetohydrodynamics. Then more metal ions deposited on the electrode surface at a faster rate and an enhancement as large as 160% for the stripping peak current was observed. Under the optimal conditions, this method exhibits high sensitivities of 5.67 µA µM^?1 for Cd²⁺ and 6.98 µA µM^?1 for Pb²⁺, over the 1×10^?8 – 1×10^?6 mol l^?1 range. Detection limits as low as 9.0×10^?10 and 8.6×10^?10 mol l^?1 for Cd²⁺ and Pb²⁺ were obtained with a 2 min preconcentration time, respectively. The method was successfully applied to detect Cd²⁺ and Pb²⁺ in real water samples and the results were in agreement with atomic absorption spectrometry.