Polymerization of vinyl monomers in the water–1,4-dioxane system containing peroxide and water-soluble polymer

Water-solube polymer (PST) containing triethylenetetramine side chain was prepared by the amination of chloromethylated polystyrene with triethylenetetramine in 1,4-dioxane. The polymerization of vinyl monomers was carried out in the water–organic solvent system containing PST and a very small amount of peroxide. The polymerization of methyl methacrylate proceeded smoothly in the presence of both peroxide and PST. It was found that the polymerization was initiated with the radicals generated by the interaction between hydroperoxide and amino groups of PST. 1,4-Dioxane hydroperoxide showed a high activity for the polymerization of methyl methacrylate. The maximum rate of the polymerization was observed at 60°C and in an approximately neutral solution. The addition of suitable amount of Cu(II) accelerated the polymerization of methyl methacrylate. The selective polymerization of vinyl monomers was observed in this system.     

Salze von Halogenophosphorsäuren. XIX. Über die Darstellung von Kupfer(II)-monofluorophosphat-Solvaten und die Kristallstruktur von Aquamonofluorophosphatokupfer(II)-1,4-Dioxan 2/1, 2[Cu(H2O)PO3F] · C4H8O2

Salts of Halogenophosphoric Acids. XIX. Preparation of Copper(II) Monofluorophosphate Solvates and the Crystal Structure of Aquamonofluorophosphatocopper(II)-1,4-Dioxane 2/1, 2[Cu(H₂O)PO₃F] · C₄H₈O₂ The mixed solvate Aquamonofluorophosphatocopper(II)-1,4-Dioxane 2/1 1 was obtained by the reaction of aqueous solutions of NH₄HPO₃F and acidified (NH₄)₂PO₃F, respectively, using 1,4-dioxane as precipitating agent. 1 crystallizes in the monoclinic space group C2/m with a = 2130.9(2), b = 655.45(6), c = 447.30(4) pm, b? = 96.207(7)° and Z = 2. Copper(II) monofluorophosphate-methanol 1/1, CuPO₃F · CH₃OH 2 was obtained by the reaction of copper(II) salts with alkaline or ammoniummonofluorophosphates in methanol. 1 and 2 react in the presence of water vapor to copper(II) monofluoro phosphate dihydrate, CuPO₃F · 2H₂O 3 , which reacts reversibly with dioxan or CH₃OH under formation of 1 and 2 , respectively.     

Occurrence of 1,4-dioxane in cosmetic raw materials and finished cosmetic products.

Surveys of cosmetic raw materials and finished products for the presence of the carcinogen 1,4-dioxane have been conducted by the U.S. Food and Drug Administration since 1979. Analytical methods are described for the determination of 1,4-dioxane in ethoxylated cosmetic raw materials and cosmetic finished products. 1,4-Dioxane was isolated by azeotropic atmospheric distillation and determined by gas chromatography using n-butanol as an internal standard. A solid-phase extraction procedure based on a previously published method for the determination of 1,4-dioxane in cosmetic finished products was also used. 1,4-Dioxane was found in ethoxylated raw materials at levels up to 1410 ppm, and at levels up to 279 ppm in cosmetic finished products. Levels of 1,4-dioxane in excess of 85 ppm in children's shampoos indicate that continued monitoring of raw materials and finished products is warranted.     

Zur Reaktion des Rhenium(VII)-oxids mit 1,4-Dioxan – Kristallstruktur von Re2O7(OH2)2 · 2(1,4-Dioxan)

Reaction of Rhenium(VII) Oxide with 1,4-Dioxane – Crystal Structure of Re₂O₇(OH₂)₂ · 2(1,4-Dioxane) By solvolysis of polymeric Re₂O₇ with 1,4-dioxane in the presence of small amounts of H₂O two products of compositions Re₂O₆(OH)₂ · 3(1,4-dioxane) ( 1 ) and Re₂O₇ · 2H₂O · 2(1,4-dioxane) ( 2 ) are formed. From a complete X-ray single-crystal structure analysis 2 could now be characterized structurally (monoclinic, space group P2₁/c, a = 6.828(3) Å, b = 9.530(2) Å, c = 26.421(8) Å, β = 91.71(3)°, Z = 4). The compound is important as a convenient precursor for the preparation of pure rhenium trioxide. It is to be formulated as Re₂O₇(OH₂)₂ · 2(1,4-dioxane) and contains, contrary to 1 , no 1,4-dioxane coordinated to Re. The crystalline phase consists of a supramolecular arrangement of Re₂O₇(OH₂)₂ units as in “solid perrhenic acid” and of 1,4-dioxane molecules associated through O? H …? O hydrogen bridges. Analogous to dirhenium heptoxide and to solid perrhenic acid one of the rhenium atoms is in tetrahedral, the other is in distorted octahedral coordination.     

Gas chromatographic determination of 1,4-dioxane at low parts-per-million levels in glycols

1,4-Dioxane is a flammable liquid and tends to form explosive peroxides. Its formation in glycols (low parts-per-million levels), which are used as dehumidifying agents in refineries, may take place by condensation. 1,4-Dioxane thus formed gets distilled over with benzene in the refinery process. Therefore, it is necessary to identify and determine the levels of 1,4-dioxane in glycols as well as benzene. Gas chromatography (GC) is probably the best technique for this purpose. GC analysis may be carried out using a flame ionization detector. Results show that 1,4-dioxane can be comfortably determined down to 2 ppm in glycols and benzene.     

CZE of Sulfur-Containing Amino Acids and Peptides and Its Application to the Quantitative Study of Heavy Metal-Caused Thiol Oxidations

The redox-active, sulfur-containing amino acids cysteine and methionine, the tripeptide glutathione and their oxidized counterparts cystine, methionine sulfoxide, and glutathione disulfide were separated as anions by capillary zone electrophoresis (CZE) in a 72 cm long fused silica capillary filled with 100 mM phosphate buffer, pH 8.0, at a voltage of +30 kV in 20 min. The optimized CZE method was suited for the implementation of quantitative metal interaction studies of the biomolecules in a biologically relevant concentration range (μM–mM). Decreasing peak areas of the reduced forms of cysteine and glutathione and simultaneously increasing peak areas of the oxidized forms after incubation of the reduced biomolecules with divalent heavy metal cations indicated redox reactions which could be responsible for toxic metal actions in biological systems. CZE measurements revealed that a 50 % oxidation grade of cysteine was achieved at a molar metal:cysteine ratio of 0.85 in case of Zn(II) addition and of 0.11 in case of Cu(II) addition, respectively. Cu(II) oxidized 50 % of the initial glutathione at a molar Cu:peptide ratio of 0.036, whereas the 50 % oxidation grade was not reached after incubation with Co(II) up to a molar ratio of Co:peptide of 0.25.

     

Die Reaktion des Rhenium(VII)-oxides mit 1,4-Dioxan Re2O6(μ2-OH)2 · 3 C4H8O2 – ein neues Oxidhydroxid mit Metall-(1,4-Dioxan)-Bindung

Reaction of Rhenium(VII) Oxide with 1,4-Dioxane. Re₂O₆(μ₂-OH)₂ · 3 C₄H₈O₂— a Novel Oxide Hydroxide with Metal-(1,4-Dioxane) Bonds The reaction of Re₂O₇ with 1,4-dioxane in the presence of small amounts of H₂O yields the compound Re₂O₆(OH)₂ · 3(1,4-dioxane). It crystallizes in the triclinic space group P¯1 with a = 10.907(3), b = 12.875(4), c = 7.943(2) Å; α = 108.64(2), β = 103.00(2), γ = 102.29(2)°; Z = 2. The complete X-ray structure analysis (R = 2.9? ) shows the crystals to contain dimeric centrosymmetric Re₂O₆(OH)₂-units with two bridging μ₂-OH groups. The ligand spheres around Re are completed towards distorted octahedra by coordinated 1,4-dioxane molecules (one O donor per Re), the latter linking the dimeric units to endless chains. The rest of the 1,4-dioxane molecules are bonded to the OH-groups through hydrogen bridges and have no contact to Re. Mean bond distances are: Re? O(bridge) 2.065 (2.059…2.070(4)) Å, Re? O(1,4-dioxane) 2.478 (2.469 and 2.486(5)) Å, Re? O (terminal) 1.707 (1.694…1.720(5)) Å.     

Two copper(II) complexes of curcumin derivatives: synthesis,crystal structure and in vitro antitumor activity

Two Cu(II) complexes of curcumin derivatives, formulated as CuL ₂ ^a (1) and CuL ₂ ^b (2) [HL^a = 1,7-bis(4-ethyloxy-3-methoxy-phenyl)-1,6-heptadiene-3,5-dione and HL^b = 1,7-bis(4-butyloxy-3-methoxy-phenyl)-1,6-heptadiene-3,5-dione], have been synthesized and characterized by single-crystal X-ray diffraction, along with physicochemical and spectroscopic methods. In both complexes, each Cu(II) center is surrounded by four oxygen atoms from two β-diketone ligands in a square planar geometry. Complex 1 forms a 2D layer structure through intermolecular π–π stacking interactions, as well as weak coordination interactions between the Cu and O atoms of the solvent 1,4-dioxane molecules. Complex 2 displays a 1D column structure stabilized by intermolecular π–π stacking interactions. MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] assays were used to evaluate the cytotoxicities of these complexes against three human cancer cell lines. The results show that the Cu(II) complexes exhibit more potent inhibition tumor growth in comparison with the free ligands.     

Adsorption and photocatalytic degradation of 1,4-dioxane on TiO2

1,4-Dioxane in hexane as a solvent was adsorbed on TiO₂ due to an electrostatic interaction. The porous TiO₂ pellets (SG) prepared by sol–gel method were superior adsorbent to ST-B21 and Degussa P-25. Effects of firing temperature of the pellets and the initial concentrations of 1,4-dioxane on the adsorption percents were examined. Photocatalytic degradation of aqueous 1,4-dioxane gave 1,2-ethanediol diformate and formic acid as intermediates. Analysis of total organic carbon indicated that 1,4-dioxane was mineralized effectively in the following order: P-25 > ST-B21 > SG. The photocatalytic degradation of 1,4-dioxane adsorbed on the TiO₂ pellets in air showed that ST-B21 had a higher activity than SG. These facts indicate that SG pellet acts as a good adsorbent because of its high specific surface area but the internal region of the pores is not illuminated and acts only as a support.     

Polymerization of propadiene. II. Catalyst systems based on 3d transition metals and various stabilizing ligands

A variety of catalyst systems based on 3d transition metals, i.e., V(III), Cr(III), Mn(II), Fe(II), Co(II), Ni(II), Cu(II), and various stabilizing ligands, i.e., propadiene, methylacetylene, phenylacetylene, and 1,4-butadiene, were prepared. The activity of these catalytic systems towards the polymerization of a series of monomers (propadiene, methylacetylene, phenylacetylene, 1,4-butadiene, ethene, and propene) is investigated. Optimum conditions for the preparation of 1,2-polyallene, polymethylacetylene and polyphenylacetylene are given.     

Novel example of a chain structure formed by 1,4-dioxane and cobalt(II) links. Chain [Co3(mu-OOCCF3)4(mu-H2O)2(OOCCF3)2(H2O)2(C4H8O2)].2C4H8O2

The trimer [Co3(mu-OOCCF3)4(mu-H2O)2(OOCCF3)2(H2O)2(C4H8O2)].2C4H8O2. (1) is composed of three tetragonally distorted Co(II) centers bridged by four trifluoroacetates and two bridging water molecules. 1,4-Dioxane is coordinated at a distance of 2.120(3) A from the terminal cobalt Co2; the remaining oxygen of this 1,4-dioxane links the terminal cobalt to a neighbor trimer, forming a one-dimensional chain. The crystal structure displays a network of hydrogen bonds between four noncoordinated 1,4-dioxane molecules and the coordinated terminal water molecules. The magnetic properties of 1 were analyzed with the use of the Hamiltonian including isotropic exchange interactions between real spins of a high-spin Co(II), spin-orbit coupling and a low-symmetry crystal field acting within the (4)T(1g) ground manifold of each cobalt ion. A weak antiferromagnetic exchange interaction between cobalt ions in 1 was found. The results of the magnetic model are in good agreement with the experimental observations.     

Distribution of 1,4-dioxane by combined inhalation plus oral exposure routes in rats

1,4-Dioxane is used in large amounts by industry. Human exposure to 1,4-dioxane is via both air and water. Recently we reported that the toxicity of chloroform is enhanced when exposure is by multiple exposure routes rather than a single exposure route. In this study, rats were exposed simultaneously to 1,4-dioxane by two routes, inhalation and oral, and the distribution of 1,4-dioxane in the blood, lung, liver, brain, kidney and abdominal fat of rats were determined. To assess the contribution of each route, unmodified 1,4-dioxane (DX) was administered by inhalation and deuterated 1,4-dioxane (DX-d₈) was administered orally, and DX and DX-d₈ were analyzed by mass spectrometer (MS). Exposure by both inhalation and oral administration resulted in DX and DX-d₈ concentrations in the blood and tissues which were higher than when exposure was by either inhalation or oral administration alone. The distribution of 1,4-dioxane in the combined inhalation plus oral administration conformed with its physicochemical properties and the tissue partition coefficients. Our results support the well accepted tenet that when investigating the toxicity of a chemical, the route of exposure is an important consideration, and in addition, our results suggest that when exposure is by multiple routes, exposure by one route may, to some extent, have an affect on exposure by the second route.     

Effect of Increasing Concentration of Each of Three Polar Solvents (1,4-Dioxane, Dimethyl Sulfoxide, N,N-Dimethylformamide) on Changes in the Shape of Polysorbate 20 Micelles

The effect of increasing concentration of each of three polar solvents [0–40 % (v/v) 1,4-dioxane, 0–40 % (v/v) dimethyl sulfoxide (DMSO), and 0–60 % (v/v) N,N-dimethylformamide (DMF)] on changes in the shape of the surfactant polysorbate 20 (Tween 20) micelles in the aqueous, polar solvent, sodium phosphate buffer solutions (pH = 7.2, ionic strength 2.44 mmol·L^?1) were investigated by using small-angle X-ray scattering. The effect of increasing concentration of 1,4-dioxane is that the micelle shape changed from core–shell cylindrical micelles to core–shell disc micelles between concentrations of 10 and 20 % (v/v) 1,4-dioxane, and then from core–shell disc micelles to core–shell elliptic disc micelles between concentrations of 30 and 40 % (v/v) 1,4-dioxane. The effect of increasing concentration of DMSO is that the micelles changed from core–shell cylindrical micelles to core–shell disc micelles between concentrations of 0 and 10 % (v/v) DMSO. The effect of increasing concentration of DMF is that it changed the core–shell cylindrical micelles to core–shell disc micelles between concentrations of 30 and 40 % (v/v) DMF. The common effect is that the solvents shortened the height of the micelle, that is, they squashed the micelle. Moreover, the specific effect of 1,4-dioxane is that this solvent squashed and squeezed the micelle.     

Solution thermodynamics and preferential solvation of triclocarban in {1,4-dioxane (1) + water (2)} mixtures at 298.15 K

The equilibrium solubility and preferential solvation of triclocarban in {1,4-dioxane (1) + water (2)} mixtures at 298.15 K was reported. Mole fraction solubility varies continuously from 2.85 × 10^–9 in neat water to 2.39 × 10^–3 in neat 1,4-dioxane. Solubility behaviour was adequately correlated by means of the Jouyban-Acree model. Based on the inverse Kirkwood-Buff integrals, preferential solvation parameters were calculated. Triclocarban is preferentially solvated by water in water-rich mixtures (0.00 < x₁ < 0.18) and also in 1,4-dioxane-rich mixtures (0.78 < x₁ < 1.00) but preferentially solvated by 1,4-dioxane in mixtures with similar solvent compositions.     

Copper(II) complex with 2-(diphenylacetyl)indanedione-1,3: Synthesis and structure

A copper(II) complex with 2-(diphenylacetyl)indanedione-1,3 (HL) was synthesized. CuL₂·0.5C₄H₈O₂ crystals prepared from chloroform + 1,4-dioxane are triclinic, space group P \(\bar 1\), a = 15.0206(9) Å, b = 16.0132(9) Å, c = 16.8323(10) Å, α = 109.6850(10)°, β = 96.4390(10)°, γ = 97.7120(10)°, Z = 4. A unit cell contains two crystallographically independent centrosymmetric dinuclear complexes of the same structure. Each copper(II) atom is coordinated by bidentate cis-oriented deprotonated ligands L at the corners of the square. Bridging 1,4-dioxane molecules make the CN of each metal atom five.     

Synthesis and properties of diphenoxo-bridged CoII, NiII, CuII, and ZnII complexes of a new tripodal ligand: generation and properties of MII-coordinated phenoxyl radical species

Four dinuclear complexes of composition [MII2(L)2].xS [M=Co, x=0.5, S=1,4-dioxane (1.0.5 1,4-dioxane); Ni, x=0 (2) [single crystals have x=2, S=diethyl ether (2.2 diethyl ether)]; Cu, x=0 (3); Zn, x=0.5, S=1,4-dioxane (4.0.5 1,4-dioxane)] have been synthesized using a new tripodal ligand [2,4-di tert-butyl-6-{[(2-pyridyl)ethyl](2-hydroxybenzyl)-aminomethyl}-phenol (H2L)], in its deprotonated form, providing a N 2O 2 donor set. Crystallographic analyses reveal that the complexes have a similar diphenoxo-bridged structure. Each metal ion is terminally coordinated by 2,4-di tert-butyl-phenolate oxygen, a tertiary amine, and a pyridyl nitrogen. From each ligand, unsubstituted phenolate oxygen provides bridging coordination. Thus, each metal center assumes M (II)N 2O 3 coordination. Whereas the geometry around the metal ion in 1.0.5 1,4-dioxane, 2.2 diethyl ether and, 4.0.5 1,4-dioxane is distorted trigonal-bipyramidal, in 3 each copper(II) center is in a square-pyramidal environment. Temperature-dependent magnetic behavior has been investigated to reveal intramolecular antiferromagnetic exchange coupling for these compounds (-J=6.1, 28.6, and 359 cm(-1) for 1.0.5 1,4-dioxane, 2, and 3, respectively). Spectroscopic properties of the complexes have also been investigated. When examined by cyclic voltammetry (CV), all four complexes undergo in CH2Cl2 two reversible ligand-based (2,4-di tert-butylphenolate unit) one-electron oxidations [E1/2(1)=0.50-0.58 and E1/2(2)=0.63-0.75 V vs SCE (saturated calomel electrode)]. The chemically/coulometrically generated two-electron oxidized form of 3 rearranges to a monomeric species with instantaneous abstraction of the hydrogen atom, and for 4.0.5 1,4-dioxane the dimeric unit remains intact, exhibiting an EPR spectrum characteristic of the presence of ZnII-coordinated phenoxyl radical (UV-vis and EPR spectroscopy). To suggest the site of oxidation (metal or ligand-centered), in each case DFT calculations have been performed at the B3LYP level of theory.     

Thermal degradation of poly(diethyleneglycol-bis-allyl carbonate)

The assisted thermal degradation of poly(diethyleneglycol-bis-allyl carbonate), poly-CR 39, has been investigated at 300°C, under nitrogen or argon, in the presence of the metals, Fe, Cu and Zn. The major decomposition products are carbon dioxide, ethene, propene, 1,4-dioxane, 2-propen-1-ol, 2,2′-oxydiethanol carbonate, 2,2′-oxydiethanol and 1,2-di(2′-hydroxy)ethoxy ethane. A degradation mechanism is proposed.     

Preparation and properties of a novel solution of hydrogen bromide (HBr) in 1,4-dioxane: An alternative reagent to HBr gas without protic solvents

A solution of hydrogen bromide (HBr) in 1,4-dioxane was prepared and investigated for its ability to brominate alcohols, and hydrobrominate alkenes. This study revealed that the brominating ability of this HBr/1,4-dioxane solution is equal or superior to that of hydrobromic acid or HBr in acetic acid. The solution of HBr in 1,4-dioxane is robust, exhibiting no decomposition of the solvent, and retaining 97% of its original concentration, when kept at ?25 °C for 30 days. This solution is a liquid alternative to HBr gas without protic solvents.     

Determination of 1,4-dioxane in household detergents and cleaners

A possible human carcinogen, 1,4-dioxane, was investigated as to its concentration levels in household detergents and cleaners currently sold in Japan. A solid-phase extraction combined with stable isotope dilution and gas chromatographic/mass spectrometric determination was evaluated for the determination of 1,4-dioxane in household products. The evaluation of the method was performed using a recovery study of 1,4-dioxane-d8 from detergent and cleaner samples. The mean overall recovery and relative standard deviation were 78 and 15%, respectively. The limit of quantitation was 0.05 mg/kg. This method was satisfactorily applied to the determination of 1,4-dioxane in household products. 1,4-Dioxane was detected in 40 out of the 51 investigated samples. The concentrations ranged from 0.05 to 33 mg/kg, and the mean was 2.7 mg/kg. The mean of the products that included anionic surfactants, i.e., alkylpoly(oxyethylene)sulfates, was 7.2 mg/kg, which was higher than the 0.39 mg/kg mean for the other surfactants. Moreover, the 1,4-dioxane load/person was estimated to be 0.061 mg/day/person in Japan, which was 27% of the load from the domestic effluent.