DNA Degradation of Genetically Modified Cottonseed Meal During Feed Processing

The effects of dry heating, wet heating, and extrusion on the degradation of DNA in cottonseed meal (CSM) were studied using polymerase chain reaction (PCR) and real-time PCR approach. Both the sad1 DNA, ranging between 128 and 883 bp in size, and the cry1Ab/c gene, ranging between 183 and 652 bp in size, were detectable in all dry-heated CSM and cottonseed. During wet heating, the sad1 gene (≥883 bp) and the cry1Ab/c (≥952 bp) gene were thoroughly degraded at 105 and 120 °C, respectively. Sizes from 128 to 530 bp for the sad1 gene and sizes from 183 to 652 bp for the cry1Ab/c gene were detected during extrusion at temperatures ranging from 75 to 135 °C. Fragments ≤883 bp for the sad1 gene and ≤952 bp for the cry1Ab/c gene were detected in all of the extruded samples with water content varying between 26 and 34 %. The copy number ratio of cry1Ab/c to sad1 in samples of Bt cottonseed meal decreased rapidly when the temperature increased during the heating process. In conclusion, feed processing markedly degrades the larger DNA fragments of sad1 and cry1Ab/c, with high temperature and water content being the main factors for that degradation.     

Electrical conductivity of titanium pyrophosphate between 100 and 400 °C: effect of sintering temperature and phosphorus content

The synthesis of titanium pyrophosphate is carried out, and the material is sintered at different temperatures between 370 and 970 °C. Yttrium is added during the synthesis to act as acceptor dopant, but it is mainly present in the material in secondary phases. The conductivity is studied systematically as a function of sintering temperature, pH₂O, pO₂, and temperature (100–400 °C). Loss of phosphorus upon sintering above 580–600 °C is confirmed by energy dispersive spectroscopy and combined thermogravimetry and mass spectrometry. The conductivity decreases with increasing sintering temperature and decreasing phosphorus content. The highest conductivity is 5.3?×?10^?4 S cm^?1 at 140 °C in wet air (pH₂O?=?0.22 atm) after sintering at 370 °C. The conductivity is higher in wet atmospheres than in dry atmospheres. The proton conduction mechanism is discussed, and the conductivity is attributed to an amorphous secondary phase at the grain boundaries, associated with the presence of excess phosphorus in the samples. A contribution to the conductivity by point defects in the bulk may explain the conductivity trend in dry air and the difference in conductivity between oxidizing and reducing atmospheres at 300–390 °C. Slow loss of phosphorus by evaporation over time and changes in the distribution of the amorphous phase during testing are suggested as causes of conductivity degradation above 220 °C.     

Pyrolysis of Hailar lignite in an autogenerated steam agent

An in situ pyrolysis process of high moisture content lignite in an autogenerated steam agent was proposed. The aim is to utilize steam autogenerated from lignite moisture as a reactant to produce fuel gas and additional hydrogen. Thermogravimetric analysis revealed that mass loss and maximum mass loss rate increased with the rise of heating rates. The in situ pyrolysis process was performed in a screw kiln reactor to investigate the effects of moisture content and reactor temperature on product yields, gas compositions, and pyrolysis performance. The results demonstrated that inherent moisture in lignite had a significant influence on the product yield. The pyrolysis of L _R (raw lignite with a moisture content of 36.9 %, wet basis) at 900 °C exhibited higher dry yield of 33.67 mL g^?1 and H₂ content of 50.3 vol% than those from the pyrolysis of the predried lignite. It was also shown that increasing reaction temperature led to a rising dry gas yield and H₂ yield. The pyrolysis of L _R showed the maximum dry yield of 33.7 mL g^?1 and H₂ content of 53.2 vol% at 1,000 °C. The LHV of fuel gas ranged from 18.45 to 14.38 MJ Nm^?3 when the reactor temperature increased from 600 to 1,000 °C.     

Protein Extraction and Enzymatic Hydrolysis of Ammonia-Treated Cassava Leaves (Manihot esculenta Crantz)

In the present work, cassava leaves were treated with 0.5 kg ammonia/kg dry matter at 78 °C and 30% moisture content in a 2-kg reactor. Protein extraction was carried out with a calcium hydroxide solution (pH 10) for 30 min at several temperatures (30 °C, 45 °C, 60 °C, 75 °C, and 90 °C) and solid/liquid ratios (1:10 and 1:15) in a thermostatized bath. Soluble protein content of the extracts was determined by Lowry’s method. Dry substrate concentrations of 5%, 7.5%, and 10% and enzyme doses of 2 and 5 IU/g dry matter were used for the enzymatic hydrolysis in an orbital incubator at 50 °C and 100 rpm. Both cellulase and xylanase were used. Reducing sugars produced were determined with the dinitrosalicylic acid method. The highest protein extraction yield for the ammonia-treated leaves was 29.10%, which was 50% higher than with the untreated leaves (20%), and was obtained at 90 °C with a 1:10 solid/liquid ratio. The concentrate had a protein content of 36.35% and the amino acid profile was suitable for swine and poultry. The highest sugar yield was 54.72% with respect to theoretical and was obtained with 5% solids and an enzyme dose of 5 IU/g dry matter. This yield was 3.4 times higher than the yield of the untreated leaves (16.13%). These results indicate that cassava leaves have a great potential for animal feeding and ethanol production. Both protein extraction and sugar yields may be enhanced by optimizing the ammonia treatment.     

Studies on the thermal behavior and decomposition kinetic of drugs cetirizine and simvastatin

Understanding the response of drugs and their formulations to thermal stresses is an integral part of the development of stable medicinal products. In the present study, the thermal degradation of two drug samples (cetirizine and simvastatin) was determined by differential scanning calorimetery (DSC) and simultaneous thermogravimetery/differential thermal analysis (TG/DTA) techniques. The results of TG analysis revealed that the main thermal degradation for the cetirizine occurs during two temperature ranges of 165–227 and 247–402 °C. The TG/DTA analysis of simvastatin indicates that this drug melts (at about 143 °C) before it decomposes. The main thermal degradation for the simvastatin occurs during two endothermic behaviors in the temperature ranges of 238–308 and 308–414 °C. The influence of the heating rate (5, 10, 15, and 20 °C min^?1) on the DSC behavior of both the drug samples was verified. The results showed that as the heating rate was increased, decomposition temperatures of the compounds were increased. Also, the kinetic parameters such as activation energy and frequency factor for the compounds were obtained from the DSC data by non-isothermal methods proposed by ASTM E696 and Ozawa. Based on the values of activation energy obtained by ASTM E696 method, the values of activation energy for cetirizine and simvastatin were 120.8 and 170.9 kJ mol^?1, respectively. Finally, the values of ΔS ^#, ΔH ^#, and ΔG ^# of their decomposition reaction were calculated.     

DSC study on the thermal properties of soybean protein isolates/corn starch mixture

The use of soybean protein isolates (SPI) and corn starch (CS) for the manufacturing of textured protein by thermo-mechanical means requires a characterization of their thermal properties. SPI and CS mixtures were examined at starch mass fractions from 0 (pure SPI) to 100 (pure CS). The blends were determined by means of differential scanning calorimetry, with water content of 30, 50, and 70 % and heating rate of 5 and 10 °C min^?1 over 20 to 130 °C. The results obtained showed that protein in the blend increased the onset (T _o) and peak (T _p) temperatures of the starch gelatinization, while starch in the blend decreased the ΔH and ΔT_1/2 of the protein. T _o , T _p, and ΔT_1/2 of SPI and CS decreased significantly with the increase of water content. T _p and ΔT_1/2 of SPI and CS had a marked increase with an increase of heating rate from 5 to 10 °C min^?1. These results suggested that there was no chemical reaction between SPI and CS when they were heated from 20 to 130 °C. SPI in the blend restricted the CS gelatinization, while the presence of CS protected the SPI from denaturation. The increasing water content did promote thermal transition of the mixture. Higher heating rate leads to higher transition temperature.     

Dilute Ammonia Pretreatment of Sorghum and Its Effectiveness on Enzyme Hydrolysis and Ethanol Fermentation

A new pretreatment technology using dilute ammonium hydroxide was evaluated for ethanol production on sorghum. Sorghum fibers, ammonia, and water at a ratio of 1:0.14:8 were heated to 160 °C and held for 1 h under 140–160 psi pressure. Approximately, 44% lignin and 35% hemicellulose were removed during the process. Hydrolysis of untreated and dilute ammonia pretreated fibers was carried out at 10% dry solids at an enzyme concentration of 60 FPU Spezyme CP and 64 CBU Novozyme 188/g glucan. Cellulose digestibility was higher (84%) for ammonia pretreated sorghum as compared to untreated sorghum (38%). Fermentations with Saccharomyces cerevisiae D₅A resulted in 24 g ethanol /100 g dry biomass for dilute ammonia pretreated sorghum and 9 g ethanol /100 g dry biomass for untreated sorghum.     

Sol–gel synthesis,characterization and water vapor adsorption properties of 1,1′-(1,6-hexanediyl)-bis(imidazolium)dichloride-silica hybrid material

1,1′-(1,6-hexanediyl)-bis(imidazolium)dichloride-silica hybrid material was prepared in 90 % yield by ammonia catalyzed sol–gel condensation of 1,1′-(1,6-hexanediyl)-bis[3-(3-triethoxysilylpropyl)-imidazolium]dichloride in aqueous ethanol. This novel ionic liquid-silica hybrid material can adsorp 27 % w/w water vapor in 90 min at room temperature and atmospheric pressure. This is a higher water adsorption capacity and rate than commercial desiccant Drierite which showed only 16 % w/w of water vapor adsorption and required 10 h to reach the maximum adsorption under identical conditions. The new adsorbent could be reused for five cycles without any significant loss in activity after regeneration by heating at 110 °C, for 24 h.     

Synthesis and thermal behavior of new ambazone complexes with some transitional cations

Ambazone is a pharmaceutical compound that possesses antiseptic activity and tested as well for anti-tumor properties. Metal complexes of Zn(II), Fe(III), and Cu(II) containing ambazone as ligand were synthesized using a molar ratio salt:ligand of 1:1, heating the mixture up to 50 °C for 6 h. Coordination compounds were characterized by thin-layer chromatography, FT-IR spectroscopy, elemental analysis, and thermal behavior. The non-isothermal experiments were carried out in order to investigate the thermal degradation process of these complexes and were performed in a dynamic air atmosphere at a heating rate β = 10 °C min^?1 from ambient temperature, up to 500 °C. It was revealed that decomposition process is a multistadial one.     

Dynamic birefringence in solutions of poly (naphthoyleneimide benzimidazole) in different stages of hydrolytic thermal degradation

Flow birefringence (FB) has been investigated in solutions of products of hydrolytic degradation of poly(naphthoyleneimide benzimidazole) (PNIB) in 96% sulphuric acid PNIB solutions have previously been subjected to heating at various temperatures from 65 to 120°C and then investigated at 22°C by FB and viscometry. A monotonic decrease in intrinsic viscosity and the molecular weightM of thermal degradation products with increasing degradation temperature was detected. At the same time, the shear optical coefficients in series of products with decreasingM first increases and then, at treatment temperatures exceeding 90°C, decreases with decreasing [ν] in accordance with decreasingM of the product. Possible reasons for the detected anomaly have been discussed.     

Characterization of a Neutral and Thermostable Glucoamylase from the Thermophilic Mold Thermomucor indicae-seudaticae: Activity, Stability, and Structural Correlation

Glucoamylase from the thermophilic mold Thermomucor indicae-seudaticae was purified by anion exchange and gel filtration chromatographic techniques using a fast protein liquid chromatographic system. The structure and thermal stability of this unique ‘thermostable and neutral glucoamylase’ were analyzed by circular dichroism (CD). T. indicae-seudaticae glucoamylase (TGA) contained typical aromatic amino acid (tryptophan/tyrosine) fingerprints in its tertiary structure. Analysis of the far-UV CD spectrum at pH 7.0 and 25 °C revealed the presence of 45% α-helix, 43% β-sheet, and 12% remaining structures. The α-helix content was highest at pH 7.0, where glucoamylase is optimally active. This observation points towards the possible (α/α)₆ barrel catalytic domain in TGA, as reported in microbial glucoamylases. Thermal denaturation curves of the pure protein at different pH values revealed maximum stability at pH 7.0, where no change in the secondary structure was observed upon heating in the temperature range between 20 °C and 60 °C. The observed midpoint of thermal denaturation (T _m) of glucoamylase at pH 7.0 was 67.1 °C, which decreased on either sides of this pH. Thermostability of TGA enhanced in the presence of starch (0.1%) as no transition curve was obtained in the temperature range between 20 °C and 85 °C. The only product of TGA action on starch was glucose, and it did not exhibit transglycosylation activity even at 40% glucose that can also be considered as an advantage during starch saccharification.     

A cautionary note on thermal runaway reactions in mixtures of 1-alkyl-3-methylimidazolium ionic liquids and <Emphasis Type="Italic">N</Emphasis>-methylmorpholine-<Emphasis Type="Italic">N</Emphasis>-oxide

N-Methylmorpholine-N-oxide (NMMO) cannot be completely separated by extraction from mixtures with common 1,3-dialkylimidazolium ionic liquids (ILs) due to strong ionic interactions between the two components. At elevated temperatures, above approx. 90 °C, especially under dry conditions and in the presence of acid, alkylating or acylating agents, remaining NMMO in ILs tends to undergo autocatalytic degradation. This is a highly exothermic, unstoppable process that results in explosions, flames, and complete charring of the reaction mixtures. Thus, caution must be exercised when drying or heating ILs that were in previous contact with NMMO, and the absence of amine oxide must be confirmed to avoid potential danger.     

The Influence of Different Strategies for the Saccharification of the Banana Plant Pseudostem and the Detoxification of Concentrated Broth on Bioethanol Production

Pseudostem of the Musa cavendishii banana plant was submitted to chemical pretreatments with acid (H₂SO₄ 2%, 120 °C, 15 min) and with alkali (NaOH 3%, 120 °C, 15 min), saccharified by commercial enzymes Novozymes® (Cellic CTec2 and HTec2). The influences of the pretreatments on the degradation of the lignin, cellulose and hemicellulose, porosity of the surface, particle crystallinity, and yield in reducing sugars after saccharification (Y _RS), were established. Different concentrations of biomass (70 and 100 g/L in dry matter (dm)), with different physical differences (dry granulated, crushed wet bagasse, and whole pseudostem), were used. The broth with the highest Y _RS among the different strategies tested was evaporated until the concentration of reducing sugars (RS) was to the order of 100 g/L and fermented, with and without prior detoxification with active carbon. Fermentation was carried out in Erlenmeyer flasks, at 30 °C, initial pH 5.0, and 120 rpm. In comparison to the biomass without chemical pretreatment and to the biomass pretreated with NaOH, the acid pretreatment of 70 g/L of dry granulated biomass enabled greater digestion of hemicellulose, lower index of cellulose crystallinity, and higher Y _RS (45.8 ± 0.7%). The RS increase in fermentation broth to 100 g/L, with posterior detoxification, presented higher productivity ethanol (Q _P = 1.44 ± 0.02 g/L/h) with ethanol yield (Y _P/RS) of 0.41 ± 0.02 g/g. The value of Q _P was to the order of 75% higher than Q _P obtained with the same broth without prior detoxification.     

Agar-based heat-sensitive gel with linear thermal response over 65–80 °C

A nontoxic heat-sensitive gel containing 1.5 % (w/v) agar and 25 % (w/v) bovine serum albumin (BSA) was fabricated in this study. Optical density measurements with 808 nm near-infrared (NIR) laser indicated that, in spite of its BSA content, the current agar + BSA gel remained similar to agar only gel in terms of its optical response to NIR laser. The thermal response of the current agar + BSA gel to high temperatures was quantified using magnetic resonance imaging (MRI). According to the MRI measurements of T2 relaxation rate as a function of heating temperature, the current agar + BSA gel showed a linear response to heating temperatures between 65 and 80 °C, while it remained thermally stable at temperatures up to 80 °C. Therefore, the current agar + BSA gel can be used as thermal dosimeters or volumetric heat-sensitive gel phantoms in typical thermal therapy regime.     

Study on the crystal transformation of ammonium polyphosphate crystalline form V

The crystal transformation of ammonium polyphosphate crystalline form V (APPv) was studied. The effects of heating time and water content in the reactor were explored. The results showed that APPv underwent complete conversion to crystalline form II (APPii) when heated at 200°C. The pure and water-insoluble APPii was obtained under the alternate wet ammonia and dry ammonia atmosphere. Then, the thermal behavior of APPv and APPii was investigated. The TG analysis showed APPv had high thermal stability over the range of 300°C to 580°C, which was possibly due to its highly cross-linked structures.     

Effect of alkaline pretreatment on delignification of wheat straw

This study was conducted to analyse structural changes through scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) after alkaline pretreatment of wheat straw for optimum steaming period. During the study, 2 mm size of substrate was soaked in 2.5% NaOH for 1 h at room temperature and then autoclaved at 121°C for various steaming time (30, 60, 90 and 120 min). Results revealed that residence time of 90 min at 121°C has strong effect on substrate, achieving a maximum cellulose content of 83%, delignification of 81% and hemicellulose content of 10.5%. Further SEM and FTIR spectroscopy confirmed structural modification caused by alkaline pretreatment in substrate. Maximum saccharification yield of 52.93% was achieved with 0.5% enzyme concentration using 2.5% substrate concentration for 8 h of incubation at 50°C. This result indicates that the above-mentioned pretreatment conditions create accessible areas for enzymatic hydrolysis.     

Heating effect on the DSC melting curve of flaxseed oil

Flaxseed oil is rich in the alpha-linolenic acid. The effect of heating on the thermal properties of flaxseed oil extracted from flax seeds has been investigated. The flaxseed oils were heated at a certain temperature (75, 105, and 135 °C, respectively) for 48 h. The melting curve (from ?75 to 100 °C) of flaxseed oil was determined by differential scanning calorimetry (DSC) at intervals of 4 h. Three DSC parameters of exothermic event and endothermic event, namely, peak temperature (T _peak), enthalpy, and temperature range were determined. The initial flaxseed oil exhibited an exothermic peak, two endothermic peaks, and two endothermic shoulders between ?68 and ?5 °C in the melting profile. Heating temperature had a significant influence on the oxidative deterioration of flaxseed oil. The melting curve and parameters of flaxseed oil were almost not changed when flaxseed oil was heated at 75 °C. However, the endothermic peaks of melting curve decreased dramatically with the increasing of heating time when heating temperature was above 105 °C. There is almost no change of melting heat flow of flaxseed oil when heating time exceeded 32 h at 135 °C. The preliminary results suggest that the DSC melting profile can be used as a fast and direct way to assess the deterioration degree of flaxseed oil.     

Surface oxidation kinetics of SiC powders in wet and dry air studied by x‐ray photoelectron spectroscopy and bremsstrahlung‐excited Auger electron spectroscopy

Silicon carbide powder samples were heated at temperatures between 600 °C and 850 °C in wet and dry air to investigate the effect of moisture on the oxidation kinetics. Equations were derived to calculate the surface oxide thickness from both the Si 2p XPS spectra and from the Si KLL bremsstrahlung‐excited Auger spectra. The oxide film growth rates are shown to be parabolic. The film thickness formed during oxidation in wet air was larger than that in dry air for the same temperature and heating time. The activation energy for wet oxidation was found to be significantly lower than that for dry oxidation within this temperature range. Copyright © 2003 John Wiley & Sons, Ltd.     

Sample pretreatment for the determination of gamma emitting nuclides in dry radioactive waste using a dry ashing and high-performance microwave digestion system

A sample pretreatment procedure for the dry radioactive waste such as paper, cotton, vinyl, and plastic generated from nuclear power plants (NPPs) was established to determine the activity concentrations of ⁶⁰Co and ¹³⁷Cs. Because the volatility of cesium is temperature-dependent, the heating temperature was examined from 300 to 650 °C. Although the cesium was not volatile until 500, 450 °C was selected to save time. Cesium with a paper towel and a planchet of stainless steel were quantitatively recovered at 450 °C. The produced ash was completely dissolved with 10 mL of HNO₃, 4 mL of HCl, and 0.25 mL of HF in a high-performance microwave digestion system using a nova high temperature rotor at 250 °C for 90 min until 0.2 g was reached. This procedure was applied to low and intermediate level radioactive wastes generated from NPPs.     

Study of thermal stabilization for polystyrene/carbon nanocomposites via TG/DSC techniques

The degradability and durability for polymer–nanocomposites under various environmental conditions are from the essential fields of research. This study was carried out to examine the thermal stability of polystyrene loaded by carbon (C) nanoparticles up to 20 wt% content. The thermal degradation of PS/C nanocomposites were studied by thermogravimetry analysis and differential scanning calorimetry (DSC) under non-isothermal condition and inert gas atmosphere at constant heating rate 10 °C min^?1. The variation of degradation characteristic temperatures as a function of C content has been a non-monotonic behavior. The obtained results suggested that the C nanoparticles act as a promoter slowing down the degradation and providing a protective barrier to the nanocomposite, except 5 wt% C content. The latter exception was confirmed by DSC curve through the emergence of a small endothermic peak before the fundamental endothermic, melting, one.