Synthesis, structure analysis and thermodynamics of [Ni(H2O)4(TO)2](NO3)2·2H2O (TO = 1,2,4-triazole-5-one)

A novel complex [Ni(H₂O)₄(TO)₂](NO₃)₂·2H₂O (TO = 1,2,4-triazole-5-one) was synthesized and structurally characterized by X-ray crystal diffraction analysis. The decomposition reaction kinetic of the complex was studied using TG-DTG. A multiple heating rate method was utilized to determine the apparent activation energy (E _a) and pre-exponential constant (A) of the former two decomposition stages, and the values are 109.2 kJ mol^?1, 10^13.80 s^?1; 108.0 kJ mol^?1, 10^23.23 s^?1, respectively. The critical temperature of thermal explosion, the entropy of activation (ΔS ^≠), enthalpy of activation (ΔH ^≠) and the free energy of activation (ΔG ^≠) of the initial two decomposition stages of the complex were also calculated. The standard enthalpy of formation of the new complex was determined as being ?1464.55 ± 1.70 kJ mol^?1 by a rotating-bomb calorimeter.     

Thermogravimetric analyses revealed the bioenergy potential of <Emphasis Type="Italic">Eulaliopsis binata</Emphasis>

The present study was focused on the thermal degradation of Eulaliopsis binata biomass produced on a salt-affected soil without any fertilizer or pesticide applications. The plant biomass was subjected to thermal degradation experiments at three heating rates, 10, 30 and 50 K min^?1. The kinetic analyses were performed through isoconversional models of Kissinger–Akahira–Sunose and Flynn–Wall–Ozawa, followed by the calculation of thermodynamic parameters of activation. The high heating value was calculated as 15.10 MJ mol^?1. The activation energy values of the grass were shown to be ranging from 118 through 240 kJ mol^?1. Energy difference of enthalpies of activation between the reagent and the activated complex was in accordance with activation energies. Pre-exponential factors indicated the reaction to follow first-order kinetics. Gibbs free energy for the grass was measured to be ranging from 171 to 174 kJ mol^?1. Our data have shown that E. binata biomass offers remarkable potential as a low-cost biomass for bioenergy.     

Kinetic and thermodynamic parameters of volatilization of biodiesel from babassu, palm oil and mineral diesel by thermogravimetric analysis (TG)

The boiling point and volatility are important properties for fuels, as it is for quality control of the industry of petroleum diesel and biofuels. In addition, through the volatility is possible to predict properties, such as vapor pressure, density, latent heat, heat of vaporization, viscosity, and surface tension of biodiesel. From thermogravimetry analysis it is possible to find the kinetic parameters (activation energy, pre-exponential factor, and reaction order), of thermally simulated processes, like volatilization. With the kinetic parameters, it is possible to obtain the thermodynamic parameters by mathematical formula. For the kinetic parameters, the minor values of activation energy were found for mineral diesel (E = 49.38 kJ mol^?1), followed by babassu biodiesel (E = 76.37 kJ mol^?1), and palm biodiesel (E = 87.00 kJ mol^?1). Between the two biofuels studied, the babassu biodiesel has the higher minor value of activation energy. The thermodynamics parameters of babassu biodiesel are, ΔS = ?129.12 J mol^?1 K^?1, ΔH = +80.38 kJ mol^?1 and ΔG = +142.74 kJ mol^?1. For palm biodiesel ΔS = ?119.26 J mol^?1 K^?1, ΔH = + 90.53 kJ mol^?1 and ΔG = +141.21 kJ mol^?1, and for diesel ΔS = ?131.3 J mol^?1 K^?1, ΔH = +53.29 kJ mol^?1 and ΔG = +115.13 kJ mol^?1. The kinetic thermal analysis shows that all E, ΔH, and ΔG values are positive and ΔS values are negative, consequently, all thermodynamic parameters indicate non-spontaneous processes of volatilization for all the fuels studied.     

Chromatographic Framework to Determine the Memantine Binding Mechanism on Human Serum Albumin Surface

In this work, the interaction of memantine with human serum albumin (HSA) immobilized on porous silica particles was studied using a biochromatographic approach. The determination of the enthalpy change at different pH values suggested that the protonated group in the memantine–HSA complex exhibits a heat protonation with a magnitude around 65 kJ mol^?1. This value agrees with the protonation of a guanidinium group, and confirmed that an arginine group may become protonated in the memantine–HSA complex formation. The thermodynamic data showed that memantine–HSA binding, for low temperature (<293 K), is dominated by a positive entropy change. This result suggests that dehydration at the binding interface and charge–charge interactions contribute to the memantine–HSA complex formation. Above 293 K, the thermodynamic data ΔH and ΔS became negative due to van der Waals interactions and hydrogen bonding which are engaged at the complex interface. The temperature dependence of the free energy of binding is weak because of the enthalpy–entropy compensation caused by a large heat capacity change, ΔC _p = ? 3.79 kJ mol^?1 K^?1 at pH = 7. These results were used to determine the potential binding site of this drug on HSA.     

Biochemical and Kinetic Study of Laccase from Ganoderma cupreum AG-1 in Hydrogels

In the present study, three different types of hydrogels i.e., (poly (?acrylamide)/alginate (P (AAm)/Alg), poly (acrylamide-N-isopropylacrylamide) (P (AAm-NIPA)), and poly (acrylamide-N-isopropylacrylamide)/alginate (P (AAm-NIPA)/Alg)) were synthesized by acrylamide, alginate, and N-isopropylacrylamide for the entrapment of laccase. The hydrogel-entrapped and free laccase showed optimum temperature of 50 °C for the oxidation of ABTS, but the entrapped laccase showed high temperature, pH, and storage stability as compared to the free enzyme. The K _m values of free laccase, (P (AAm)/Alg)-L, (P (AAm-NIPA))-L, and (P (AAm-NIPA)/Alg)-L were found to be 0.13, 0.28, 0.33, and 0.50 mM, respectively. The V _max values of free laccase, (P (AAm)/Alg)-L, (P (AAm-NIPA))-L, and (P (AAm-NIPA)/Alg)-L were found to be 22.22?×?10², 5.55?×?10², 5.0?×?10², and 4.54?×?10² mM/min, respectively. The entrapped laccase hydrogels were used for the decolorization of Reactive Violet 1 dye, with 39 to 45 % decolorization efficiency till the 10th cycle.     

Thermal study on decomposition of LiBH4 at non-isothermal and non-equilibrium conditions

Thermal decomposition measurements for lithium borohydride (LiBH₄) are performed at non-isothermal and non-equilibrium conditions by means of differential thermal analysis (DTA). A simplified alternative procedure is introduced for evaluating thermodynamic and kinetic parameters simultaneously using a single set of measurements. Rate constant (k) and enthalpy (ΔH = ?102.1 ± 0.7 kJ mol^?1 LiBH₄) are archived. Temperature dependence for activation energy (E _a) is found taking advantage of Guggenheim–Arrhenius method; the mean activation energy is $ \overline{E}_{a} $  93.9 ± 0.9 kJ mol^?1 LiBH₄ in the range of heating rate β 1–50 K min^?1.     

Removal of thorium from aqueous solution by adsorption using PAMAM dendron-functionalized styrene divinyl benzene

Third generation poly(amido)amine (PAMAM) dendron was grown on the surface of styrene divinylbenzene (SDB) by divergent polymerization method. This new chelating resin (PAMAMG3-SDB) has been investigated in liquid–solid extraction of thorium. The effects of analytical parameters such as pH, contact time, concentration of thorium, resin dose and temperature on adsorption were investigated. Kinetic and isotherm studies of the adsorption were also carried out to understand the nature of adsorption of thorium on the chelating resin. Kinetic data followed a pseudo-second-order model and equilibrium data were best fitted with Langmuir model. The maximum adsorption capacity of thorium ions was determined to be 36.2 mg g^?1 at 298 K. Thermodynamic parameters such as standard enthalpy, entropy, and free energy of adsorption of thorium on PAMAMG₃-SDB were calculated as ?10.498 kJ mol^?1, 0.0493 kJ mol^?1 K^?1 and ?25.208 kJ mol^?1 respectively at 298 K from temperature dependent equilibrium data.     

Dibenzofuran and methyldibenzofuran derivatives: assessment of thermochemical data

Thermochemical data of dibenzofuran, a compound of considerable industrial and environmental significance, obtained from experimental calorimetric and computational techniques are reported in this work. The enthalpy of fusion, (19.4 ± 1.0) kJ mol^?1, at the temperature of fusion, (355.52 ± 0.02) K, was determined by differential scanning calorimetry measurements of dibenzofuran. From the standard (p° = 0.1 MPa) molar enthalpies of formation of crystalline dibenzofuran, (?29.2 ± 3.8) kJ mol^?1, and of sublimation, (84.5 ± 1.0) kJ mol^?1, determined at T = 298.15 K by static bomb combustion calorimetry and by vacuum drop microcalorimetry, respectively, it was possible to calculate the enthalpy of formation of the gaseous compound, (55.0 ± 3.9) kJ mol^?1, at the same temperature. The enthalpy of formation in the gaseous phase was also determined from G3(MP2)//B3LYP calculations. The same computational strategy was employed in the calculation of the standard molar enthalpies of formation, at T = 298.15 K, in the gas-phase, of single methylated derivatives of benzofuran and dibenzofuran.     

Adsorptive removal of thorium from aqueous solution using diglycolamide functionalized multi-walled carbon nanotubes

Multi-walled carbon nanotubes (MWCNTs) were functionalized with diglycolamide (DGA) through chemical covalent route. The adsorption behavior of the DGA-functionalized-MWCNTs (DGA-MWCNTs) towards thorium from aqueous solution was studied under varying operating conditions of pH, concentration of thorium, DGA-MWCNTs dosages, contact time, and temperature. The effective range of pH for the removal of Th(IV) is 3.0–4.0. Kinetic data followed a pseudo-second-order model. The equilibrium data were correlated with the Langmuir, Freundlich, Dubinin-Radushkevich and Temkin models. The equilibrium data are best fitted with Langmuir model. The equilibrium Th(IV) sorption capacity was estimated to be 10.58 mg g^?1 at 298 K. The standard enthalpy, entropy, and free energy of adsorption of the thorium with DGA-MWCNTs were calculated to be 8.952 kJ mol^?1, 0.093 kJ mol^?1 K^?1 and -18.521 kJ mol^?1 respectively at 298 K. The determined value of sticking probability (0.072) and observed kinetic and isotherm models reveal the chemical adsorption of thorium on DGA-MWCNTs.     

Thermogravimetric analysis of lignocellulosic and microalgae biomasses and their blends during combustion

Thermogravimetric analysis was used to study and compare the combustion of different blends of corn bioresidues with sunflower, rape and algae bioresidues. Non-isothermal thermogravimetric data were used to obtain the combustion kinetics of these bioresidues. This paper reports on the application of the Vyazovkin and Ozawa–Flynn–Wall isoconversional methods for the evaluation of kinetic parameters (energy activation, pre-exponential factor and order of reaction) for the combustion of the biomasses studied. Differences were found in the TG curves in accordance with the proximate analysis results for the cellulose, hemicellulose and lignin content of biomasses. The activation energy obtained from combustion (E ~ 151.6 kJ mol^?1) was lower than that from the blends (similar values were obtained for corn–sunflower, E ~ 160.5 kJ mol^?1 and corn–rape, E ~ 156.9 kJ mol^?1) whereas the activation energy obtained from the microalgae was higher (E ~ 171.5 kJ mol^?1). Both the Vyazovkin and Ozawa–Flynn–Wall methods yielded similar results.     

Exploring antibiotic resistance based on enzyme hydrolysis by microcalorimetry

In an effort to understand the reactions of antibiotics hydrolysis with metallo-β-lactamases (MβLs), the thermokinetic parameters of cefazolin hydrolysis with B1 subclass MβL CcrA from Bacteroides fragilis were determined by microcalorimetric method. The values of activation free energy $ \Updelta G_{ \ne }^{\theta } $ are 88.032 ± 0.038, 89.075 ± 0.025, 90.095 ± 0.034, and 91.261 ± 0.044 kJ mol^?1 at 293.15, 298.15, 303.15, and 308.15 K, respectively, the activation enthalpy $ \Updelta H_{ \ne }^{\theta } $ is 25.278 ± 0.005 kJ mol^?1, the activation entropy $ \Updelta S_{ \ne }^{\theta } $ is ?213.99 ± 0.14 J mol^?1 K^?1, the apparent activation energy E is 27.776 kJ mol^?1, and the reaction order is 1.4. The results indicated that the cefazolin hydrolysis with CcrA is an exothermic and spontaneous reaction. An association between the thermokinetic and kinetic parameters was revealed, which is that the catalytic constant K _cat increase with increase in $ \Updelta H_{ \ne }^{\theta } $ .     

Effect of temperature on frying oils: infrared spectroscopic studies

Frying oils were studied by Fourier-transform infrared (FT-IR) spectroscopy, in the range 4,000–200 cm^?1, at different temperatures, in the liquid and solid states. The infrared spectrum at 15 °C was similar to that at 200 °C. The band at 730 cm^?1 which was assigned to the rocking mode of (–CH₂) disappeared at higher temperature because of the rotational isomerism which occurred in the oil structure. The activation energy (E _a) of the disappearing (–CH₂) band, calculated by use of the chemical dynamic method using the Arrhenius equation, is 8.45 kJ mol^?1. The enthalpy difference (ΔH) between the two rotational isomer bands of the conformational structures of the oil at 730 and 1,790 cm^?1, at different high temperatures, was also calculated, by use of the Van’t Hoff equation; the value obtained was ?10.85 kJ mol^?1.     

A detailed study of isothermal crystallization of As2Se3 undercooled liquid

Isothermal crystallization of an As₂Se₃ undercooled melt was studied by differential scanning calorimetry and described using the classical theory of nucleation and crystal growth. The maximum rate of nucleation and crystal growth was observed to occur at approximately 235 and 350 °C, respectively. The activation energies of nucleation and crystal growth were determined to be ΔE _D = 311 kJ mol^?1 and ΔE* = 104 kJ mol^?1, respectively. The temperature dependencies of both the activation free energy of nucleation, ΔG*, and the critical diameter, r*, were also calculated.     

Synthesis and characterization of photorefractive polymers containing indole groups

Some new photorefractive polymers containing indole groups were synthesized and characterized by IR, ¹H NMR, and UV techniques. The Gibbs free energy changes (ΔG) of corresponding reactions were predicted by density functional theory to be 4.19 and ?9.71 kcal mol^?1 for –H, and 4.12 and ?11.93 kcal mol^?1 for –OCH₃, respectively. The glass transition temperature (T _g) of the polymers were about 96–111 °C. The nonlinear second-order optical susceptibility was predicted to be 2.84 × 10^?30 and 1.04 × 10^?30 esu by theoretical quantum calculations.     

Thermal parameters study of 1,1-bis(tert-butylperoxy)cyclohexane at low heating rates with differential scanning calorimetry

Having two active peroxide groups, 1,1-bis(tert-butylperoxy)cyclohexane (BTBPC) has a certain degree of thermal instability. It is usually used as an initiator in a chemical process, and therefore, careless operation could result in severe accidents. This study emphasized the runaway reactions of BTBPC 70 mass% (4.5–5.2 mg), the relevant thermokinetic parameters, and the thermal safety parameters. Differential scanning calorimetry was used to evaluate the above-mentioned thermokinetic parameters, using four low heating rates (0.5, 1, 2, and 4 °C min^?1) combined with kinetic simulation method. The results indicated that apparent exothermic onset temperature (T _o), apparent activation energy (E _a), and heat of decomposition (ΔH _d) were ca. 118 °C, 156 kJ mol^?1, and 1,080 kJ kg^?1, respectively. In view of process loss prevention, at the low heating rates of 0.5, 1, 2, and 4 °C min^?1, storing BTBPC 70 mass% below 27.27 °C is a more reassuring approach.     

Determination of salutary parameters to facilitate bio-energy production from three uncommon biomasses using thermogravimetric analysis

Fuels derived from biomass are renewable as well as environment friendly. In this study, three biomasses viz. husk of areca nut (Areca catheu), trunks of moj (Albizzia lucida), and bon bogori (Ziziphus rugosus) available in North-East region of India were tested as potential biofuel sources. The accentuation of this study was to determine the kinetic parameters using thermogravimetric (TG) technique under air and nitrogen atmosphere. The experiments were carried out within temperature range 300–973 K under air and nitrogen atmosphere at four different heating rates viz. 5, 10, 15, and 20 K min^?1, respectively. The mass losses at different lumps in the TG graphs were estimated. The first-order kinetic parameters such as activation energy and pre-exponential factor were calculated for different reaction zones for all the three biomass samples. Effects of atmosphere on combustion characteristics (e.g., peak temperature, ignition temperature, and reactivity index) of biomasses were also determined in this study. Areca nut husk has highest ignition temperature (526.38 K) and reactivity index (0.21) but moj has highest peak temperature (597.91 K) along with highest activation energy (348.04 kJ mol^?1) and pre-exponential factor (1.12 × 10²⁴ min^?1), respectively.     

Some Thermodynamic Properties of Aqueous 2-Mercaptopyridine-N-Oxide (Pyrithione) Solutions

The thermodynamic properties of 2-mercaptopyridine-N-oxide (pyrithione, PT) were studied potentiometrically in NaCl aqueous solutions at different ionic strengths and temperatures. A set of protonation constants is provided, together with distribution (water/2-methyl-1-propanol) and solubility data. The total and the specific solubility (solubility of neutral species) values of pyrithione were determined and, for example, are 0.0561 and 0.0518 mol·dm^?3 at c _NaCl = 0.244 mol·dm^?3 and T = 298.15 K. By fitting the distribution and solubility results against the ionic strength, the Setschenow coefficient and the activity coefficients of the neutral species were determined. In pure water, the specific solubility is log₁₀ \( S_{m 0}^{0} = \, {-} 1. 20 \, \pm \, 0.0 4 \) . To determine the activity coefficient of the charged species and the protonation constant at infinite dilution, the data were analyzed by different models, namely the Debye–Hückel type equation, the SIT (Specific ion Interaction Theory) and the Pitzer approach. The interaction coefficient of the deprotonated pyrithione species was determined [ε(Na⁺, PT^?) = ?0.105 ± 0.002]. The protonation enthalpy was also determined, is slightly positive, and the protonation process is entropic in nature. At infinite dilution and T = 298.15 K, log₁₀ K ^H0 = 4.620 ± 0.002, ΔG ⁰ = –26.4 ± 0.1 kJ·mol^?1, ΔH ⁰ = 2.1 ± 0.5 kJ·mol^?1 and TΔS ⁰ = 28.5 ± 0.5 kJ·mol^?1. The electrochemical behavior of pyrithione was studied in NaCl solutions at T = 298.15 K. It was found that voltammetry can be used to study the binding ability of pyrithione towards metal cations. The results of this work are in agreement with literature findings and improve the knowledge of the chemistry of pyrithione in aqueous solutions.     

Polyvinyl alcohol fibers with functional phosphonic acid group: synthesis and adsorption of uranyl (VI) ions in aqueous solutions

PVA functionalized with vinylphosphonic acid was prepared as a new adsorbent for uranyl (VI) adsorption from aqueous solutions. The vinylphosphonic acid was cografted onto PVA fibers by preirradiation grafting technique. The adsorbent were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. The adsorbent was observed to possess a fibrous structure and was bonded with phosphonic acid groups successfully. The adsorbent was used for the adsorption of low levels uranyl (VI) ions from aqueous solutions. The influence of analytical parameters including pH, adsorption time, amount of adsorbent, metal ion concentration, and temperature were investigated on the recovery of uranyl (VI) ion in aqueous solution. The maximum adsorption capacity (32.1 mg g^?1) and fast equilibrium time (30 min) were achieved at pH of 4.5 at room temperature. Thermodynamic parameters (ΔH° = 2.695 kJ mol^?1; ΔS° = 31.15 J mol^?1 K^?1; ΔG° = ?6.748 kJ mol^?1) show the adsorption of an exothermic process and spontaneous nature, respectively. The possible coordination mechanism was illustrated. Adsorption and desorption coexist in aqueous solutions and then the system becomes equilibrium.     

Interaction Between Ginkgolic Acid and Human Serum Albumin by Spectroscopy and Molecular Modeling Methods

The interaction of ginkgolic acid (15:1, GA) with human serum albumin (HSA) was investigated by FT–IR, CD and fluorescence spectroscopic methods as well as molecular modeling. FT–IR and CD spectroscopic showed that complexation with the drug alters the protein’s conformation by a major reduction of α-helix from 54 % (free HSA) to 46–31 % (drug–complex), inducing a partial protein destabilization. Fluorescence emission spectra demonstrated that the fluorescence quenching of HSA by GA was by a static quenching process with binding constants on the order of 10⁵ L·mol^?1. The thermodynamic parameters (ΔH = ?28.26 kJ·mol^?1, ΔS = 11.55 J·mol^?1·K^?1) indicate that hydrophobic forces play a leading role in the formation of the GA–HSA complex. The ratio of GA and HSA in the complex is 1:1 and the binding distance between them was calculated as 2.2 nm based on the Förster theory, which indicates that the energy transfer from the tryptophan residue in HSA to GA occurs with high probability. On the other hand, molecular docking studies reveal that GA binds to Site II of HSA (sub-domain IIIA), and it also shows that several amino acids participate in drug–protein complexation, which is stabilized by H-bonding.     

Experimental and theoretical evidence suggests carbamate intermediates play a key role in CO2 sequestration catalysed by sterically hindered amines

The chemisorption of CO₂ by aqueous-hindered amines has been investigated experimentally and theoretically. Negative-ion ESI–MS analysis of solutions containing a sterically hindered amine and a source of ¹³CO₂ reveals peaks corresponding to [M–H + 45]^?. These ions readily lose 45 Da when subjected to collisional activation, and together with other key fragments confirms the generation of the ¹³C-labelled carbamate derivatives. The thermochemistry of the two key capture reactions: $$2.{\text{amine }} + {\text{ CO}}_{ 2} { \leftrightarrows }{\text{amine}} - {\text{CO}}_{ 2}^{ - } + {\text{ amine}} - {\text{H}}^{ + } {\kern 1pt} \quad 1:{\text{carbam}}$$ $${\text{amine }} + {\text{ CO}}_{ 2} + {\text{ H}}_{ 2} {\text{O}}{ \leftrightarrows }{\text{HCO}}_{ 3}^{ - } + {\text{ amine}} - {\text{H}}^{ + } \quad 2:{\text{ bicarb}}$$ at 298 K was modelled using composite chemistry methods, CCSD(T), DFT, and SM8 free energies of solvation. The aqueous reaction free energies (ΔG ₂₉₈) for reaction 1 are predicted to be more negative than ΔG ₂₉₈ for reaction 2 when amine = ammonia, 2-aminoethanol (MEA), 2-amino-2-methyl-1-propanol (AMP), 2-amino-2-hydroxymethyl-propane-1,3-diol (tris), and 2-piperidinemethanol (2-PM). For AMP, tris, and 2-PM, activation free energies ΔG ₂₉₈ ^? for reaction 1 (SM8 + CCSD(T)/6-311 ++G(d,p)//M08-HX/MG3S: 38–67 kJ mol^?1) are smaller than the corresponding values for 2 (109–113 kJ mol^?1). For 2-PM, the computed carbamate ΔG ₂₉₈ ^? (38 kJ mol^?1) is comparable to the MEA value (45 kJ mol^?1), whereas the primary amines with tertiary alpha carbons have slightly larger values (60–70 kJ mol^?1). The organic amine values are much lower than the value for ammonia (93 kJ mol^?1). The results indicate CO₂ chemisorption proceeds via a carbamate intermediate for all aqueous primary and secondary amines. Hindered carbamates are susceptible to further chemical transformations following their formation.