Elastic equations for a cylindrical section of a tree

Considering a cylindrical section of a tree subjected to loads independent of x₃ as a relaxed Saint-Venant's problem, it was shown that plane sections remain plane. Since plane sections remain plane, the displacement equations for the neutral fiber derived using either the relaxed Saint-Venant's problem or elementary beam theory are equivalent. The stresses in the plane of the transverse cross-section were found to equal to zero. Therefore, it is appropriate to use elementary beam theory to estimate the three-dimensional stress functions when the wood is considered to be homogeneous. In addition the three-dimensional displacement equations allow the required elastic coefficients in cylindrical coordinates to be measured from full size samples.     

Shear stresses in elastic beams: an intrinsic approach

The theory of non-uniform flexure and torsion of Saint-Venant's beam with arbitrary multiply connected cross section is revisited in a coordinate-free form to provide a computationally convenient context. Numerical implementations, by Matlab, are performed to evaluate the maximum elastic shear stresses in beams with rectangular cross sections for different Poisson's ratios. The deviations between the maximum and mean stresses are then diagrammed to adjust the results provided by Jourawski's method.     

On the Deformation of Functionally Graded Porous Elastic Cylinders

This paper is concerned with the linear theory of inhomogeneous and orthotropic elastic materials with voids. We study the problem of extension and bending of right cylinders when the constitutive coefficients are independent of the axial coordinate. First, the plane strain problem for inhomogeneous and orthotropic elastic materials with voids is investigated. Then, the solution of the problem of extension and bending is expressed in terms of solutions of three plane strain problems. The results are used to study the extension of a circular cylinder with a special kind of inhomogeneity. The influence of the material inhomogeneity on the axial strain is established.      

Torsion in nonlinearly elastic incompressible circular cylinders

We consider a variable torsion deformation for incompressible right-circular cylinders and investigate the possibility of equilibrium states other than simple torsion in isotropic hyperelasticity. Our problem formulation also provides generalized versions of Rivlin's universal relations in torsion. In this more general setting, it is shown that simple torsion persists as the only solution for large classes of strain energies. When one allows for more general boundary conditions, variable torsion solutions are possible for special forms of the stored energy function. We derive such a form and develop general results.     

Saint-Venant End Effects in Anti-plane Shear for Classes of Linear Piezoelectric Materials

This paper is concerned with further investigation of the effect of mechanical/electrical coupling on the decay of Saint-Venant end effects in linear piezoelectricity. Saint-Venant's principle and related results for elasticity theory have received considerable attention in the literature but relatively little is known about analogous issues in piezoelectricity. The current rapidly developing smart structures technology provides motivation for the investigation of such problems. The decay of Saint-Venant end effects is investigated in the context of anti-plane shear deformations for linear homogeneous piezoelectric solids. For a rather general class of anisotropic piezoelectric materials, the governing partial differential equations of equilibrium are a coupled system of second-order partial differential equations for the mechanical displacement u and electric potential ?. The traction boundary-value problem with prescribed surface charge can be formulated as an oblique derivative boundary-value problem for this elliptic system. Energy-decay estimates using differential inequality methods are used to study the axial decay of solutions on a semi-infinite strip subjected to non-zero boundary conditions only at the near end. This analysis is carried out for a rather general class of materials (the tetragonal ${\bar 4}$ crystal class). The boundary-value problem involves a full coupling of mechanical and electrical effects. There are four independent material constants appearing in the problem. An explicit estimated decay rate (a lower bound for the actual decay rate) is obtained in terms of two dimensionless piezoelectric parameters d ₀,r, the first of which provides a measure of the degree of piezoelectric coupling. The estimated decay rate is shown to be monotone decreasing with increasing values of the coupling parameter d ₀. In the limit as d ₀→0, we recover the exact decay rate for the purely mechanical case. Thus, for the tetragonal ${\bar 4}$ class of materials, piezoelectric end effects are predicted to penetrate further into the strip than their elastic counterparts, confirming recent results obtained in other contexts in linear piezoelectricity.     

Singularities in auxetic elastic bimaterials

In this paper we study the effects of negative Poisson's ratios on elastic problems containing singularities. Materials with a negative Poisson's ratio are termed auxetic. We present a brief review of such materials. The elasticity problem of a bimateral wedge is presented, then two particular cases of this problem are investigated: the free-edge problem and the interface crack problem. We study the effect on the stress singularity due to one portion of the bimaterial becoming auxetic. We find that the auxetic material has a significant effect on the singularity order, even causing the singularity to vanish for certain values of the elastic constants.     

Torsion of Incompressible Fiber-Reinforced Nonlinearly Elastic Circular Cylinders

Torsion of solid cylinders in the context of nonlinear elasticity theory has been widely investigated with application to the behavior of rubber-like materials. More recently, this problem has attracted attention in investigations of the biomechanics of soft tissues and has been applied, for example, to examine the mechanical behavior of passive papillary muscles of the heart. A recent study in nonlinear elasticity was concerned specifically with the effects of strain-stiffening on the torsional response of solid circular cylinders. The cylinders are composed of incompressible isotropic nonlinearly elastic materials that undergo severe strain-stiffening in the stress-stretch response. Here we investigate similar issues for fiber-reinforced transversely-isotropic circular cylinders. We consider a class of incompressible anisotropic materials with strain-energy densities that are of logarithmic form in the anisotropic invariant. These models reflect stretch induced strain-stiffening of collagen fibers on loading and have been shown to model the mechanical behavior of many fibrous soft biological tissues. The consideration of anisotropy leads to a more elaborate mechanical response than was found for isotropic strain-stiffening materials. The classic Poynting effect found for rubber-like materials where torsion induces elongation of the cylinder is shown to be significantly different for the transversely-isotropic materials considered here. For sufficiently large anisotropy and under certain conditions on the amount of twist, a reverse-Poynting effect is demonstrated where the cylinder tends to shorten on twisting The results obtained here have important implications for the development of accurate torsion test protocols for determination of material properties of soft tissues.     

Saint-Venant's Problem for Porous Linear Elastic Materials

We use a semi-inverse method to study deformations of a straight, prismatic, homogeneous body made of a porous, linear elastic, and isotropic material and loaded only at its end faces by self equilibrated forces. As in the classical theory, the problem is reduced to solving plane elliptical problems. It is shown that the Clebsch/Saint-Venant and Voigt hypotheses are not valid for this problem. This revised version was published online in August 2006 with corrections to the Cover Date.     

Effective properties of a nonuniform beam under torsion

Effective characteristics are considered in the pure torsion problem for a nonuniform beam. The Saint-Venant semi-inverse method is used. A torsion stress function is introduced; this function can be found by solving a cross-sectional boundary value problem for a partial differential equation with variable coefficients. Two special boundary value problems are formulated for such an equation; after solving these problems, some effective characteristics are calculated in the case of torsion. It is shown that these effective characteristics satisfy the conditions of symmetry and positive definiteness. The case of an infinite in-plane layer of nonuniform thickness is discussed.     

Specific features of the nonlinearly elastic behavior of cylindrical compressible bodies in torsion

The torsion problem of a cylinder with a circular transverse cross section twisted by end moments that are equal in magnitude and opposite in direction is considered for various models of nonlinearly elastic compressible media. The problem is solved by the semi-inverse method of elasticity theory. The Poynting effect, which consists of variation in the length of a shaft in torsion, is treated qualitatively and quantitatively. The results of the numerical and asymptotic (only terms that are quadratic relative to the displacement gradient are conserved) solutions for various models of the nonlinearly elastic behavior of materials are compared. An analysis of the results shows that in some cases, the quasilinear model is not applicable for studying the behavior of nonlinearly elastic compressible media. Rostov State Construction University, Rostov-on-Don 344022. Rostov State University, Rostov-on-Don 344090. Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 41, No. 2, pp. 188–193, March–April, 2000.     

Duality among Optimal Design Problems for Torsional Vibration

ABSTRACT

Four types of mass and frequency optimization problems are stated for free torsional vibration of thin-walled cylinders subject to constraints on wall thickness and frequencies of vibration. It is shown, using Pontryagin's method, that the mathematical structure of all four problems is similar and leads to identical classes of optimal thickness distributions. These duality relations are used in an example to construct an optimal frequency solution from the solutions for both maximum and minimum mass problems. General relations among the governing parameters for the four problems are stated. The results of Grinev and Filippov and of Thermann for the abnormal optimization problems are verfied as a specific limiting example of the general results.     

On the Volterra's Distortions Theory

This paper has been spurred by the great influence of the Volterra's distortions theory on the modern theory of dislocations and particularly of the ones which study the crystals, aelotropic materials. Volterra developed his theory, as well as the explicit solutions, for elastic, homogeneous, isotropic, and right hollow cylinders. Here we are subduing the assumptions developing the theory for transversely isotropic hollow cylinders.     

A magnetoelectric screw dislocation interacting with a circular layered inclusion

Within the framework of the linear theory of magnetoelectroelasticity, the problem of a circular layered inclusion interacting with a generalized screw dislocation under remote anti-plane shear stress and in-plane magnetoelectric loads is investigated in this paper. The generalized dislocation can be located either in the matrix or in the circular layered inclusion. The layers are coaxial cylinders of annular cross-sections with arbitrary radii and different material properties. Using complex variable theory and the alternating technique, the solution of the present problem is expressed in terms of the solution of the corresponding homogeneous medium problem subjected to the same loading. Some numerical results are provided to investigate the influence of material combinations on the shear stress, electric field, magnetic and image force. These solutions can be used as Green's functions for the analysis of the corresponding magnetoelectric crack problem.     

Numerical solution of axisymmetric multi-species compressible gas flow: towards improved circuit breaker simulation

Nozzle wall ablation caused by high-temperature electrical arcs is studied in the context of high voltage SF₆ circuit breakers. The gases generated by the ablation mix with insulating gas, thereby modifying the thermodynamics and chemistry of the problem. To simulate these phenomena, an axisymmetric Euler equations model for multi-species flow at local thermodynamic equilibrium has been developed. The governing equations are solved using a finite-volume method based on Roe's flux-splitting scheme and a new procedure is proposed to obtain the mean values used in Roe's matrix involving multi-species. The change in the gas composition due to dissociation, ionisation and recombinations are taken into account by a dynamic coupling to a thermodynamic database. The formulation is appropriate for general equations of state. The scheme has been verified by comparisons with the analytical solution of a classic shock-tube problem. An experimental validation is presented involving the simulation of shock interactions with helium cylinders and bubbles in air. The scheme is also compared to experimental ablation results, as well as a previous version of the code. The model is then applied to a well controlled experimental arrangement with an arc inside a small Teflon^® tube. Finally, a simulation with a model circuit breaker completes the study.     

The torsion problem of a multilayered finite cylinder with the multiple interface cylindrical cracks

The torsion axisymmetric problem for a finite cylinder consisting of an arbitrary quantity of cylindrical coaxial layers is solved. Multiple cylindrical cracks with free of loading branches are situated on adjoining surfaces of the layers. The boundary problem is reduced to the system of integro-differential equations, its solution is found with the help of the orthogonal polynomials method. The novelty of the paper is in the construction of a solution for an arbitrary number of cylinder layers which allows the approximation of the initial problem for functionally graded materials by the problem for coaxial cylinders with jumplike changing elastic constants of the materials. Since the solution is built regardless of the number of layers (the elastic parameters of all layers are included in the constructed solution), one can refine an initial problem’s statement by increasing the number of layers. The stress intensity factors are found for an arbitrary number of cylindrical interface cracks in the multilayered cylinder of a finite length.     

Design of heterogeneous clamped circular plates with specified fundamental natural frequency

The titled problem is solved by the aid of the semi-inverse formulation. At the first glance, a surprising demand is posed: Design a radially heterogeneous polar orthotropic circular plate whose fundamental mode shape coalesces with the static deflection of a homogeneous circular plate of the same radius and thickness under uniformly distributed load. Compatible polynomial variations of the radial and circumferential flexural rigidities are introduced. It turns out that these are infinite amount of polar orthotropic circular plates that solve the posed semi-inverse problem, depending on the free parameter represented by one of the coefficients in variation of flexural rigidities. This allows to provide an unique solution to the titled problem: there is a single plate that possesses the specified fundamental natural frequency.     

轴对称任意梯度圆筒的弹性动力学解

基于轴对称平面应变问题的运动方程及弹性梯度材料的应力和位移关系,通过将圆筒分层使材料性质离散为分段常数函数,同时在时域内应用有限差分格式,求得了材料性质沿径向梯度变化的圆筒弹性动力学解。本文解不仅适合任意梯度的弹性圆筒,而且容易满足多种形式的初始条件和边界条件。通过对材料性质沿径向为连续函数分布和分段函数分布的梯度圆筒数值分析,并与已有文献结果比较,得出本文解与已有文献的解吻合较好,验证了本文解的正确性和有效性。对材料性质为分段函数的三层组合圆筒分析发现,中间功能梯度层的指数分布因子对圆筒的径向位移和应力随时间变化都会产生显著影响。     

On the jet collision: General model and reduction to the Mie-Grüneisen state equation

We study the stationary direct supersonic collision of jets of condensed materials. We determine the basic flow characteristics: the maximum values of pressure, temperature, and densities on outgoing shock wave fronts and at the wave stagnation and penetration points. To this end, just as in the Lavrentiev problem about the jet collision in the framework of an incompressible fluid model, it suffices to consider the flow only along the central streamline, i.e., the symmetry axis. We consider the general caloric (incomplete) equation of state and, to close the thermodynamic construction and determine the temperature dependence on the state parameters, supplement them with thermodynamic identities. We also consider the conditions on discontinuities, the Bernoulli integrals, i.e., the conservation laws, to relate the states behind the wave front and the stagnation point, and the continuity conditions at this point. Just as in the collision problem for jets of incompressible fluid, we neglect the strength, viscosity, and heat conduction. As a result, we construct a mathematical model, i.e., a system of 12 integro-algebraic equations, and propose a semi-inverse solution method, in which the system splits into separate equations. In the special case of the Mie-Grüneisen state equation, the system becomes much simpler. We perform computations and construct the dependence of maximal pressures and temperatures on the impact velocity in the range 1–20 km/s for many pairs of materials of the colliding jets. We also compare the results with the solution obtained according to the incompressible fluid model.     

均布荷载作用下功能梯度悬臂梁弯曲问题的解析解

采用弹性力学半逆解法,假设所有材料常数沿梁厚度方向按同一函数规律变化,求得了功能梯度悬臂梁在均布载荷作用下的解析解.该解退化到各向同性均匀弹性情况时与已有的理论解相一致.对弹性模量按指数函数梯度变化的算例进行了分析.所得到的解对任意梯度函数均成立,可作为数值解以及简化理论的检验依据.     

The Pressurized Hollow Cylinder or Disk Problem for Functionally Graded Isotropic Linearly Elastic Materials

The purpose of this research is to investigate the effects of material inhomogeneity on the response of linearly elastic isotropic hollow circular cylinders or disks under uniform internal or external pressure. The work is motivated by the recent research activity on functionally graded materials (FGMs), i.e., materials with spatially varying properties tailored to satisfy particular engineering applications. The analog of the classic Lamé problem for a pressurized homogeneous isotropic hollow circular cylinder or disk is considered. The special case of a body with Young"s modulus depending on the radial coordinate only, and with constant Poisson"s ratio, is examined. It is shown that the stress response of the inhomogeneous cylinder (or disk) is significantly different from that of the homogeneous body. For example, the maximum hoop stress does not, in general, occur on the inner surface in contrast with the situation for the homogeneous material. The results are illustrated using a specific radially inhomogeneous material model for which explicit exact solutions are obtained. This revised version was published online in August 2006 with corrections to the Cover Date.