n阶线性脉冲微分方程解的振动性

脉冲微分方程解的振动性由于在物理、生态、工程等领域有其应用背景,引起了人们的广泛兴趣,正在成为研究的热点．本文讨论了一类n阶线性脉冲微分方程解的振动性和非振动性,分别给出了n为奇数和偶数时该方程振动和非振动的充分条件,并通过3个例题说明了文中定理的应用,所得结论改进并推广了部分文献的相关结果．     

一类二阶线性微分方程的振动性及非振动性

本文研究了二阶线性方程的振动性及非振动性问题，建立了若干新的振动与非振动性结果，它们改进并推广了若干已知的定理。     

一类二阶非线性泛函微分方程解的渐近性及振动性

本文讨论二阶非线性泛函微分方程解的渐近性及振动性．     

非线性高阶差分方程的振动性

首先我们证明了下列两个差分方程在振动性上是等价的,其中,和都是整数,ｍ是奇数,ｆ是非减的且满足当时．其次,也得到了这些方程的新的振动准则     

具有连续变量的差分方程振动性的判据

借助研究离散变量的差分方程振动性的一般方法,本文建立了具有连续变量、变系数的差分方程振动性判据,其结果改进了文献［４］中的一些结果．     

具有振动系数时滞差分方程解的振动性

本文研究了一类具振动系数时滞差分方程解的振动性,给出了一个新的振动准则,改进了已有文献中许多相关的结果．     

具有正负周期系数的差分方程的振动性与线性化振动性

本文得到具有正负周期系数的差分方程振动的一个充分必要条件,并利用此充要条件获得了一个线性化振动性结果。     

具变时滞差分方程解的振动性

本文研究了一类具变时滞的非线性差分方程解的振动性,获得了该方程解的振动准则．将结论应用于差分方程ΔＸｎ ＋ ｐｎｘｎ－ ｋｎ ＝ ０　　ｎ ＝ ０,１,２,… （）其中ｐｎ≥０,｛ｋｎ｝是正整数数列且ｌｉｍｎ→∞｛ｎ－ ｋｎ｝＝ ∞．我们得到了方程（）振动的新的充分条件．     

二阶矩阵微分系统的振动性

通过Kummer变换，建立了线性矩阵微分系统(P(t)Y′)′ Q(t)Y=0的振动性判别准则，改进了文[4]，[5]的振动性判别准则，并且简化了文[7]的证明．     

高阶泛函微分方程的振动性和渐近性

本文讨论带有强迫项的时滞型泛函微分方程的振动性和渐近性。对于形如和的方程得到了几个振动及渐近性质的判别准则。本文的结论的证明还修正了R.S.Dahiya在讨论线性方程时出现的错误。     

Creep of polymer concrete in the nonlinear region

Two polyester-based polymer concretes with various volume content of diabase as an extender and aggregate are tested in creep under compression at different stress levels. The phenomenological and structural approaches are both used to analyze the experimental data. Common features of changes in the instantaneous and creep compliances are clarified, and a phenomenological creep model which accounts for the changes in the instantaneous compliance and in the retardation spectrum depending on the stress level is developed. It is shown that the model can be used to describe the experimental results of stress relaxation and creep under repeated loading. Modeling of the composite structure and subsequent solution of the optimization problem confirm the possibility of the existence of an interphase layer more compliant than the binder. A direct correlation between the interphase volume content and the instantaneous compliance of the composite is revealed. It is found that the distinction in nonlinearity of the viscoelastic behavior of the two polymer concretes under investigation can be due to the difference in their porosity. Submitted to the 11th International Conference on Mechanics of Composite Materials (Riga, June 11–15, 2000.) Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 2, pp. 147–164, 2000.     

A model for predicting the shear bearing capacity of FRP-strengthened beams

The shear failure of reinforced concrete beams needs more attention than the bending failure since no or only small warning precedes the failure. For this reason, it is of utmost importance to understand the shear bearing capacity and also to be able to undertake significant rehabilitation work if necessary. In this paper, a design model for the shear strengthening of concrete beams by using fiber-reinforced polymers (FRP) is presented, and the limitations of the truss model analogy are highlighted. The fracture mechanics approach is used in analyzing the bond behavior between the FRP composites and concrete. The fracture energy of concrete and the axial rigidity of the FRP are considered to be the most important parameters. The effective strain in the FRP when the debonding occurs is determined. The limitations of the anchorage length over the cross section are analyzed. A simple iterative design method for the shear debonding is finally proposed. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 44, No. 3, pp. 357–372, May–June, 2008.     

Gaussian Versus Optimal Integration of Analytic Functions

We consider error estimates for optimal and Gaussian quadrature formulas if the integrand is analytic and bounded in a certain complex region. First, a simple technique for the derivation of lower bounds for the optimal error constants is presented. This method is applied to Szeg?-type weight functions and ellipses as regions of analyticity. In this situation, the error constants for the Gaussian formulas are close to the obtained lower bounds, which proves the quality of the Gaussian formulas and also of the lower bounds. In the sequel, different regions of analyticity are investigated. It turns out that almost exclusively for ellipses, the Gaussian formulas are near-optimal. For classes of simply connected regions of analyticity, which are additionally symmetric to the real axis, the asymptotic of the worst ratio between the error constants of the Gaussian formulas and the optimal error constants is calculated. As a by-product, we prove explicit lower bounds for the Christoffel-function for the constant weight function and arguments outside the interval of integration. September 7, 1995. Date revised: October 25, 1996.     

Dynamical Spin Susceptibility in the t–J Model in the Superconducting Phase

Dynamical spin susceptibility is calculated for the t–J model in the superconducting phase using the memory function method in terms of the Hubbard operators. The self-consistent system of equations for the memory function is obtained within the mode-coupling approximation. Both itinerant hole excitations and localized spin fluctuations contribute to the memory function. Moreover, the itinerant contribution itself consists of two parts, i.e., the contribution of Bogoliubov quasiparticles and that of Cooper pairs. The spin dynamics is diffusive in the hydrodynamic limit, but the itinerant part does not contribute to the spin diffusion. In the high frequency region, spin–wave-like excitations continue to exist. We discuss our analytic results in the light of neutron scattering experiments performed on the cuprate superconductors.     

Variation of the structure and permeability of tensioned fiber layers during impregnation with a thermoplastic polymer melt

The influence of displacements of tensioned fibers on the impregnation of fibrous layers with a polymer melt and on the final composite structure is studied. Using computer simulation, it is shown that, during impregnation, the structure of tensioned fibrous layers changes considerably depending on the initial arrangement and tensioning of fibers. The consolidated regions formed under the melt front move inside the impregnated layer with the advancing melt front. Displacement of the tensioned fibers as well as the formation of “washouts” favors the impregnation of internal layers, but cause significant inhomogeneity of the polymer structure. The surface (on the side of the melt flow) regions are more saturated with the polymer than the internal ones. A difference in the melt percolation mechanisms at various impregnation regimes is revealed. The effective permeability coefficients of a tensioned fiber layer are not constant but depend on the conditions and regimes of impregnation. Submitted to the 11th Conference on the Mechanics of Composite Materials (Riga, June 11–15, 2000). Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 2, pp. 259–270, March–April, 2000.     

Worst-case robust Omega ratio

The Omega ratio is a recent performance measure proposed to overcome the known shortcomings of the Sharpe ratio. Until recently, the Omega ratio was thought to be computationally intractable, and research was focused on heuristic optimization procedures. We have shown elsewhere that the Omega ratio optimization is equivalent to a linear program and hence can be solved exactly in polynomial time. This permits the investigation of more complex and realistic variants of the problem. The standard formulation of the Omega ratio requires perfect information for the probability distribution of the asset returns. In this paper, we investigate the problem arising from the probability distribution of the asset returns being only partially known. We introduce the robust variant of the conventional Omega ratio that hedges against uncertainty in the probability distribution. We examine the worst-case Omega ratio optimization problem under three types of uncertainty – mixture distribution, box and ellipsoidal uncertainty – and show that the problem remains tractable.     

The distributional dimension of fractals

In the book [1] H.Triebel introduces the distributional dimension of fractals in an analytical form and proves that： for Г as a non-empty set in R^n with Lebesgue measure ｜Г｜ = 0, one has dimH Г = dimD Г, where dimD Г and dimH Г are the Hausdorff dimension and distributional dimension, respectively. Thus we might say that the distributional dimension is an analytical definition for Hausdorff dimension. Therefore we can study Hausdorff dimension through the distributional dimension analytically. By discussing the distributional dimension, this paper intends to set up a criterion for estimating the upper and lower bounds of Hausdorff dimension analytically. Examples illustrating the criterion are included in the end.     

The Cauchy problem for ut=Δu+|∇u|

With q a positive real number, the nonlinear partial differential equation in the title of the paper arises in the study of the growth of surfaces. In that context it is known as the generalized deterministic KPZ equation. The paper is concerned with the initial-value problem for the equation under the assumption that the initial-data function is bounded and continuous. Results on the existence, uniqueness, and regularity of solutions are obtained.     

基于VAR风险指标的投资组合模糊优化

在二目标有价证券选择基础上 ,引入目前流行的风险指标 VAR,以收益率与风险损失为目标 ,将模糊概念运用于有价证券组合选择 ,按投资者给定的期望目标及容差 ,讨论了 S型隶属函数模型 .通过 VAR的给定 ,将投资者所能承受的最大损失锁定 ,更好地反映出投资者对目标值的取值意图 .依据深圳股票市场9只股票收益率数据 ,采用进化规划进行优化计算 ,并验证模型的有效性 .     

Strategic defense and attack for series and parallel reliability systems

A system of independent components is defended by a strategic defender and attacked by a strategic attacker. The reliability of each component depends on how strongly it is defended and attacked, and on the intensity of the contest. In a series system, the attacker benefits from a substitution effect since attacker benefits flow from attacking any of the components, while the defender needs to defend all components. Even for a series system, when the attacker is sufficiently disadvantaged with high attack inefficiencies, and the intensity of the contest is sufficiently high, the defender earns maximum utility and the attacker earns zero utility. The results for the defender (attacker) in a parallel system are equivalent to the results for the attacker (defender) in a series system. Hence, the defender benefits from the substitution effect in parallel systems. With budget constraints the ratio of the investments for each component, and the contest success function for each component, are the same as without budget constraints when replacing the system values for the defender and attacker with their respective budget constraints.