Oxidation of Hydrogen by Metal Complexes of Platinum and Palladium Immobilized on Silica

The thermal stability of metal complexes immobilized on the surface of silica and its connection with the catalytic activity in the oxidation of hydrogen were investigated. High catalytic activity was exhibited by heterogenized platinum and palladium acetylacetonate near room temperatures in the initial state and by γ-aminopropylsilicas treated with platinum and palladium complexes. The catalytic activity of the metal complexes correlates with their thermal stability and with the ability to undergo oxidation to a metal state with high valence. This revised version was published online in August 2006 with corrections to the Cover Date.     

Catalytic Oxidation of Small Molecules in a Gas Phase in the Presence of Heterogenized Platinum and Palladium Complexes with Chemically Different Ligands

This work is devoted to the study of catalytic properties of the metal complexes of platinum and palladium with acetylacetone and N-allyl-N"-propylthiourea heterogenized on the surface of silica in the oxidation reactions of H₂ and CO in a gas phase. We found that the acetylacetonate complexes were not degraded under catalytic reaction conditions, whereas the metal complexes withN-allyl-N"-propylthiourea exhibited a high activity only after partial degradation of the ligand. We demonstrated that the catalytic activity of the grafted metal complexes was higher than that of traditional supported platinum and palladium catalysts with the same metal content. Taking into account the structure of active centers in Pt and Pd complexes grafted on SiO₂ and the interaction of these centers with reactants, we proposed a detailed mechanism for the catalytic action, which adequately describes the entire set of experimental data.     

Y型分子筛中对称与不对称Co(II)Salen型席夫碱配合物的结构和催化性能

用自由配体法将对称、不对称Co(II)Salen型席夫碱配合物封装于Y型沸石分子筛的超笼中, 并采用FTIR、UV- Vis、热分析和催化技术研究了其空间结构和催化性能. 结果表明, 被封装于分子筛超笼中的Salen型席夫碱配合物, 同样具有未封装配合物的物理化学性能, 也没有影响分子筛的框架结构；在以O2作氧化剂, 催化苯乙烯环氧化反应中表现了非常高的反应活性和稳定性；金属配合物的量子化学密度泛函计算结果揭示了配合物的催化性能与轨道能量密切相关.     

Liquid-phase oxidation of anthracene by hydrogen peroxide in the presence of heterogenized vanadyl acetylacetonate

The synthesis of heterogenized vanadyl acetylacetonate was accomplished by alkylation of a chloromethylated styrene—divinylbenzene copolymer via activation by Co(II) complexes. The effect of heterogenization on the structure of the complexes and their catalytic properties in the peroxide oxidation of anthracene was investigated by kinetic studies and EPR spectroscopy. Increased stability during oxidation of the catalytic centers of the polymer sample as compared with homogeneous vanadyl acetylacetonate was demonstrated.Department of Fine Organic Synthesis, Institute of Chemistry, Bashkir Science Center, Ural Branch, Russian Academy of Sciences, Ekaterinburg 620219. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 4, pp. 800–804, April, 1992.     

Palladium-based telomerization of 1,3-butadiene with glycerol using methoxy-functionalized triphenylphosphine ligands

Glycerol is considered a potential renewable building block for the synthesis of existing as well as new chemicals. A promising route is the telomerization of 1,3-butadiene with glycerol leading to C8 chain ethers of glycerol with applications in, for example, surfactant chemistry. Recently, we reported a new set of palladium-based homogeneous catalytic systems for the telomerization of 1,3-butadiene with glycerol and found that palladium complexes bearing methoxy-functionalized triphenylphosphine ligands are highly active catalysts capable of converting crude glycerol without any significant loss of activity. Herein, we present a detailed account of these investigations by reporting on the influence of the butadiene/glycerol ratio, temperature, and reaction time on product selectivity and activity allowing further optimization of catalyst performance. Maximum activity and yield were reached for high 1,3-butadiene/glycerol ratios at a temperature of 90 degrees C, whereas the selectivity for mono- and diethers of glycerol could be optimized by combining high reaction temperatures and short reaction times with low butadiene/glycerol ratios. Variation of the PdII metal precursors and the metal/ligand ratio showed that palladium precursors with halogen ligands gave unsatisfying results, in contrast to precursors with weakly coordinated ligands such as [Pd(OAc)2] and [Pd(acac)2]. [Pd(dba)2], the only Pd0 precursor tested, gave the best results in terms of activity, which illustrates the importance of the ability to form a Pd0 species in the catalytic cycle. Finally, base addition resulted in a shortening of the reaction time and most likely facilitates the formation of a Pd0 species. Based on these results, we were able to realize the first attempts towards a rational ligand design aimed at a high selectivity for mono- and diether formation.     

Palladium supported on chitosan as a recyclable and selective catalyst for the synthesis of 2-phenyl ethanol

Two different chitosan supported palladium based catalysts were prepared, wherein dispersed palladium nanoparticles were obtained via chemical reduction supported on chitosan (Pd/CTS) and amine functionalized modified chitosan (Pd/AFCTS). The catalytic activity of the Pd-based catalysts, Pd/CTS and Pd/AFCTS, were assessed in the hydrogenation of styrene oxide to 2-phenyl ethanol. Both Pd-based catalysts enhanced the formation of the desired 2-phenyl ethanol in contrast to a conventional Pd/C catalyst without the assistance of inorganic or organic base. A considerable influence on the conversion and selectivity was observed in the case of Pd/AFCTS, consisting of palladium nanoparticles stabilized and dispersed on amine-functionalized chitosan matrix, affording complete conversion of styrene oxide with 98% selectivity to 2-phenyl ethanol. The catalyst Pd/AFCTS has also been recycled without significant loss of activity and selectivity.     

Insights into the Heck reaction with PCP pincer palladium(II) complexes

[reaction: see text] The Heck reaction of phenyl halides with styrene using a series of related PCP pincer palladium(II) complexes was studied in order to evaluate the effect of ligand structure and electronics on the catalytic activity and to investigate the nature of the catalyst species. We suggest these pincer complexes are precatalysts for highly active forms of metallic palladium. This conclusion is based on kinetic studies (induction periods, sigmoidal kinetics), Hg drop tests, quantitative poisoning experiments, and NMR studies.     

Preparation, properties, and catalytic activity of transition-metal complexes containing a ligated 2-methyl-3,3-diphenyl-1,3-diphosphapropene skeleton

2-Methyl-3,3-diphenyl-1-(2,4,6-tri-t-butylphenyl)-1,3-diphosphapropene behaved as an unsymmetrical chelating ligand for transition metal complexes and the 1,3-diphosphapropene moiety was hydrolyzed to afford the 1,3-diphosphapropan-1-ol derivative upon coordination. The palladium complex showed catalytic activity for the Sonogashira coupling reaction.     

A silica-supported palladium-bis(oxazoline) complex efficiently catalyzes the synthesis of cinnamic acid derivatives via Mizoroki–Heck coupling reactions

A palladium(II)-bis(oxazoline) complex supported on silica (Pd-BOX-Si) was prepared, characterized and applied as a catalyst in Mizoroki–Heck cross-coupling reactions. The bis(oxazoline) (BOX) ligand has a hydroxyl group that can be anchored to 4-benzyl chloride-functionalized silica gel, followed by the coordination of palladium(II) chloride. The catalytic activity and the recyclability of Pd-BOX-Si have been investigated in the production of cinnamic acid derivatives via Mizoroki–Heck coupling reactions of acrylates with aryl halides; The Pd-BOX-Si catalyst demonstrated excellent catalytic activity. Characterization of the recycled Pd-BOX-Si catalyst revealed its good stability under the reaction conditions employed.     

NCN pincer palladium complexes: their preparation via a ligand introduction route and their catalytic properties

A wide range of NCN pincer palladium complexes, [4-tert-butyl-2,6-bis(N-alkylimino)phenyl]chloropalladium (alkyl = n-butyl, benzyl, cyclohexyl, tert-butyl, adamantyl, phenyl, 4-methoxyphenyl), were readily prepared from trans-(4-tert-butyl-2,6-diformylphenyl)chlorobis(triphenylphosphine)palladium via dehydrative introduction of the corresponding alkylimino ligand groups (ligand introduction route) in excellent yields (71-98%). NMR studies on this route for forming pincer complexes revealed the intermediacy of [4-tert-butyl-2,6-bis(N-alkylimino)phenyl]chlorobis(triphenylphosphine)palladium which is in equilibrium with the corresponding NCN pincer complexes via coordination/dissociation of the intramolecular imino groups and triphenylphosphine ligands. A series of chiral NCN pincer complexes bearing pyrroloimidazolone units as the trans-chelating donor groups, [4-tert-butyl-2,6-bis{(3R,7aS)-2-phenylhexahydro-1H-pyrrolo[1,2-c]imidazol-1-on-3-yl}phenyl]chloropalladium, were also prepared from the same precursor via condensation with proline anilides in high yields. The catalytic properties of the NCN imino and the NCN pyrroloimidazolone pincer palladium complexes were examined in the Heck reaction and the asymmetric Michael reaction to demonstrate their high catalytic activity and high enantioselectivity.     

A novel amphiphilic pincer palladium complex: design, preparation and self-assembling behavior

Amphiphilic pincer palladium complexes bearing hydrophilic and hydrophobic side chains on the planar NCN palladium pincer backbone were designed and prepared via the ligand introduction route. The complexes self-assembled under aqueous conditions to form vesicles with bilayer membranes containing palladium species. The catalytic activity of the vesicles in the Miyaura-Michael reaction in water was investigated.     

Novel polymer‐supported β‐dithioketonate nickel catalysts for selective propylene dimerization

Brominated and chloromethylated styrene–divinylbenzene resins were used for the synthesis of polymer‐bound dithio‐β‐diketones, obtained by anchoring the chelate ligand through the central position. The heterogenized dithio‐β‐diketone ligand was subsequently reacted either as sodium salt with a Ni(II) phosphino derivative or directly with a Ni(0) complex in the presence of a free phosphine and activated in situ with an aluminum co‐catalyst for the selective dimerization of propylene to 2,3‐dimethylbutenes. The hetetogenized catalysts so obtained showed, particulary when prepared starting from chloromethylated styrene/divinylbenzene resins, very high activity and selectivity towards 2,3‐dimethylbutenes. Moreover, the above catalysts, at least under the adopted reaction conditions, did not display any appreciable metal leaching during the catalytic cycle, thus working as really heterogeneous systems. Copyright © 1999 John Wiley & Sons, Ltd.     

Chemical assembling of silica surface using a reaction of catalytic hydrosilylation

Chemical assembling of the silica surface modified by dimethylchlorosilane was performed by the catalytic hydrosilylation of 1,3-divinyl-1,1,3,3-tetramethyldisiloxane, α-methyl styrene, acetophenone, allyl butyl and allyl glycidyl ethers with dimethylchlorosilane. The effect of the nature of complexes of platinum, palladium, rhodium and ruthenium on the parameters of hydrosilylation was studied. It was shown that the maximum rate of hydrosilylation was observed in the reaction with allyl glycidyl ether, and minimum, with α-methylstyrene; the most effective catalyst of hydrosilylation was [Rh(CO)₂(acac)].     

Heterogenization of a chiral bis(oxazoline) catalyst by grafting onto silica

[reaction: see text] We report here the first heterogenization of a bis(oxazoline) ligand on an inorganic (silica) surface. The activity and enantioselectivity of this new material as a catalyst for the Diels-Alder reaction were checked, and it was shown that under certain conditions enantioselectivities similar to those of the homogeneous catalyst are reached. It was also shown that under these conditions the catalyst can be recycled without loss of activity or selectivity.     

New chiral P-N ligands for the regio- and stereoselective Pd-catalyzed dimerization of styrene

Two new chiral, enantiomerically pure, hybrid P-N ligands, namely (2R,5S)-2-phenyl-3-(2-pyridyl)-1,3-diaza-2-phosphanicyclo[3,3,0]octan-4-one (1) and (2R,5S)-2-phenyl-3-(2-pyridyl)-1,3-diaza-2-phosphanicyclo[3,3,0]octane (2), have been synthesized starting from L-proline. The two ligands differ in the presence or not of a carbonyl group in the diazaphosphane ring. Their coordination chemistry towards Pd(II) was studied by reacting them with [Pd(CH?)Cl(cod)]. A different behaviour was observed: ligand 2 shows the expected bidentate chelating behaviour leading to the mononuclear Pd-complex, while ligand 1 acts as a terdentate ligand giving a dinuclear species. The corresponding cationic derivatives were obtained from the palladium neutral complexes, both as mono- and dinuclear derivatives, and tested as precatalysts for styrene dimerization, yielding E-1,3-diphenyl-1-butene regio- and stereoselectively as the sole product. A detailed analysis of the catalytic behaviour is reported.     

Controlled polymerization in mesoporous silica toward the design of organic-inorganic composite nanoporous materials

Free-radical polymerization inside mesoporous silica has been investigated in order to open a route to functional polymer-silica composite materials with well-defined mesoporosity. Various vinyl monomers, such as styrene, chloromethyl styrene, 2-hydroxyethyl methacrylate, and methacrylic acid, were polymerized after impregnation into mesoporous silicas with various structures, which were synthesized using polyalkylene oxide-type block copolymers. The location of the polymers was systematically controlled with detailed structures of the silica framework and the polymerization conditions. Particularly noteworthy is the polymer-silica composite structure obtained by in situ polymerization after the selective adsorption of monomers as a uniform film on silica walls. The analysis of XRD data and the N(2) adsorption isotherms indicates the formation of uniform polymer nanocoating. The resultant polymer-silica composite materials can easily be post-functionalized to incorporate diverse functional groups in high density, due to the open porous structure allowing facile access for the chemical reagent. The fundamental characteristics of the composite materials are substantiated by testing the biomolecule's adsorption capacity and catalytic reactivity. Depending on the structure and composition of polymers, the resultant polymer-silica composite materials exhibit notably distinct adsorption properties toward biomolecules, such as proteins. Furthermore, it is demonstrated that the nanocoatings of polymers deposited on the mesopore walls have remarkably enhanced catalytic activity and selectivity, as compared to that of bulk polymer resins. We believe that, due to facile functionalization and attractive textural properties, the mesoporous polymer-silica composite materials are very useful for applications, such as adsorption, separation, host-guest complexes, and catalysis.     

1,3-Diphosphapropenes for novel chemistry of metal complexes

2-Methyl-3,3-diphenyl-1-(2,4,6-tri-t-butylphenyl)-1,3-diphosphapropene was obtained as a chelate ligand for palladium(II) and platinum(II) complexes. Sulfurization of 2-methyl-1,3-diphosphapropene mainly gave 3-thioxo-1,3-diphosphapropene which bears a PC-PS skeleton and was used as a ligand of transition-metal complexes. A doubly-sulfurized product of the 1,3-diphosphapropene, 1,3-dithioxo-1,3-diphosphapropene, was isolated and characterized. The palladium(II) complexes containing the ligated 1,3-diphosphapropenes were used for catalytic reactions such as cross-couplings and direct conversion of allyl alcohol to allylaniline.     

Preparation and coordination properties including catalytic activities of a bulky 2-methyl-3-thioxo-1,3-diphosphapropene

[reaction: see text] 2-Methyl-3,3-diphenyl-3-thioxo-1-(2,4,6-tri-tert-butylphenyl)-1,3-diphosphapropene, which bears a P=C-P=S skeleton, was prepared and used as a ligand of transition-metal complexes. The palladium complexes containing the ligated 3-thioxo-1,3-diphophapropene were stable and used for catalytic reactions such as cross-couplings and direct conversion of allyl alcohol to allylaniline.     

负载(S)-脯氨酸手性固相催化剂制备和在不对称加氢反应中的应用

用亲水性、高比表面积、硅烷化硅小球担载钯,以（Ｓ）－脯氨酸为手性助剂、苯乙酮为反应底物,考察不对称加氢反应和不同有机碱助催化剂的影响。实验表明,当使用三辛胺助催化剂时,（Ｒ）－苯乙醇的对映异构体选择性可达１７．５％。将（Ｓ）－脯氨酸负载于亲水性、高比表面积、硅烷化硅小球担体表面,以Ｐｄ（ＯＡｃ）２为催经剂前体,制备负载型手性固相催化剂,初步考察了（Ｓ）－脯氨酸与中心金属钯的摩尔比、疏水性不同的有机     

Palladium nanoparticles immobilized on Schiff base‐functionalized mesoporous silica as a highly efficient and magnetically recoverable nanocatalyst for Heck coupling reaction

A new magnetically recoverable nanocatalyst was prepared by functionalization of mesoporous silica (SBA‐15) with a Schiff base ligand, and then immobilization of palladium nanoparticles on it using a simple procedure. This heterogeneous catalyst was fully characterized using appropriate analyses and its catalytic efficiency was investigated in Heck reaction using iodo‐, bromo‐ and chlorobenzene derivatives and styrene, with the aim of synthesizing stilbene derivatives, a class of compounds with a variety of pharmacological properties. Some of the characteristics of this nanocatalyst include good dispersion of palladium nanoparticles on the SBA‐15 support, easy separation, catalyses the production of stilbene derivatives in a short time with excellent yields even for bromo‐ and chlorobenzene, and preservation of its catalytic activity after eight reaction cycles.