以离子液体为结构导向剂合成有序超微孔二氧化硅

在酸性条件下, 以1-十六烷基-3-甲基溴化咪唑为表面活性剂合成了具有有序超微孔结构的二氧化硅材料, 所合成的材料具有较高的比表面积和二维六方有序的孔结构, 样品的孔径尺寸为1.8 nm.     

Mesoporous Silica Materials Synthesized via Sol-Gel Methods Modified with Ionic Liquid and Surfactant Molecules

Mesoporous silica materials were synthesized via a sol-gel method employing a room temperature ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate, bmimBF4) as a new solvent medium and further modified with surfactant (hexadecyl-trimethyl-ammonium bromide, CTAB) as a pore templating material. The synthesized samples were characterized by the transmission electron microscopy, X-ray diffraction, and N2 adsorption-desorption techniques. The results indicated that the mesoporous silica synthesized by using bmimBF4 and CTAB as mixed templates showed better mesostructural order and smaller pore size, compared with mesoporous silica materials synthesized by using single bmimBF4 as template under the same conditions. This indicates that the presence of surfactant can affect the microstructures of silica prepared by the present synthesis method.     

辅助有机胺对介孔分子筛MCM-41合成及其性质的影响

采用阳离子表面活性剂十六烷基三甲基溴化铵为模板剂、硫酸铝为铝源、硅溶胶为硅源，分别使用中等链长的有机胺和正己烷作为辅助添加剂，用水热晶化法在碱性介质中合成了介孔分子筛MCM-41，通过XRD、N2吸附-脱附、SEM测试手段对得到的样品进行了对比表征分析。实验结果表明，除三乙胺外，向反应体系中加入适量的三正丙胺、三正丁基胺、三正辛胺和二异丁胺后，均能够使介孔 MCM-41的d100值和孔径增大，且具有较大的BET表面积（>1 000 m2/g）和孔容（>1 cm3/g）；加入正己烷后，也可以使得MCM-41孔径变大，但是和加入有机胺相比较，合成的样品具有较小的BET表面积（887.3 m2/g）和孔容（0.81 cm3/g）。     

Benzene Adsorption Isotherms on MCM-41 and their Use for Pore Size Analysis

This work is focused on the elaboration of methodology for adsorption characterization of porous silicas by using benzene adsorption isotherms measured on good quality MCM-41 materials. Three MCM-41 samples were synthesized by using tetraethyl orthosilicate (TEOS) as silica source and surfactants, octyltrimethylammonium (C8), decyltrimethylammonium (C10) and cetyltrimethylammonium (C16) bromides as templates. A characteristic feature of this synthesis was relatively long hydrothermal treatment (5 days) at 373 K, which gave well ordered samples as evidenced by powder XRD analysis. Benzene adsorption isotherms measured on these MCM-41 samples were used to evaluate such standard quantities as the BET specific surface area, total pore volume, external surface area and the volume of ordered mesopores, and to obtain the statistical film thickness (t-curve) as well as the Kelvin-type relation, which describes the dependence between pore width and condensation pressure for benzene on silica at 298 K. The latter relations were incorporated into the Barrett-Joyner-Halenda algorithm to extend its applicability to calculate the pore size distributions from benzene adsorption data.     

磺酸基功能化MCM-41有机-无机杂化材料的合成与表征

 利用直接合成法和后接枝法将含有磺酸基团的硅烷偶联剂引入MCM-41介孔分子筛中, 合成了酸性介孔有机-无机杂化材料. 利用XRD和TEM等方法对其结构进行了表征. 结果表明,利用直接合成法和后接枝法合成的杂化材料仍保持规整的介孔孔道,该材料作为酸催化剂在苯甲醛与乙二醇的缩醛反应中显示了较好的催化活性.     

高纯度中孔分子筛MCM-41的合成与表征

用不同pH值的混合物制备了不同孔径的全硅MCM-41和不同金属离子取代的M-MCM-41(M=Al,Mn,Fe和V)分子筛.这些试样均呈现MCM-41的X射线粉末衍射特征峰和Ⅳ型氮气吸附等温线,但混有不同含量的无定形氧化硅.样品中MCM-41晶体的含量与溶胶的pH值和所用表面活性剂的碳链链长有关.骨架硅的金属离子取代降低了MCM-41的有序度,并且(100)面衍射峰强度从Al到V依次减弱.     

模板剂对全硅MCM-41介孔分子筛结构的影响

分别采用十六烷基三甲基溴化铵和十六烷基三乙基溴化铵作为模板剂,硅溶胶为硅源,用水热晶化法在碱性（NaOH）介质中合成了MCM-41介孔分子筛样品.通过XRD、N2吸附-脱附、TG-DTA、IR等测试手段对这两种样品进行了对比表征分析.考察了两种不同模板剂对其晶体结构、比表面及孔径大小的影响.实验结果表明,相对于十六烷基三甲基溴化铵做模板剂,采用大头基的十六烷基三乙基溴化铵可以合成较大孔径和孔容（分别为4.72 nm和1.14 cm3•g-1）的MCM-41介孔分子筛,而且具有较窄的孔径分布,因此对于合成大孔径的介孔分子筛MCM-41,十六烷基三乙基溴化铵是一种很好的模板剂.     

Anionic surfactant-templated mesoporous silica (AMS) nano-spheres with radially oriented mesopores

Mesoporous silica nano-spheres with pore size larger than 3 nm were synthesized using an anionic surfactant as the template. These nano-spheres possess centrosymmetric radial mesopores (emanating from the spherical center to the exterior surface) and form stable suspension. The spherical size and mesostructure can be finely tuned by changing the pH value of the synthetic system in the range of 8.8 to 6.4. In addition, when the pH value was decreased to 5.8, instead of spheres, anisotropic morphologies such as elliptical, peanutlike and trifurcate particles were obtained, exhibiting core/shell structure due to the different orientations of the mesopores in the core and the shell of the particles. It is proposed that the evolution of the morphologies and mesostructures of the products templated by anionic surfactants strongly depend on the pH value of the synthetic system.     

Incorporation of CdS Nanoparticles Formed in Reverse Micelles into Mesoporous Silica

The incorporation of CdS nanoparticles, prepared in reverse micellar systems, into thiol-modified mesoporous silica, such as FM41 (functionalized MCM-41) and FM48 (functionalized MCM-48), has been investigated. The nanoparticles were immobilized in the mesopores via the incorporation of water droplets of the reverse micelles. A particle-sieving effect for FM41 having large (L-FM41, 3.8 nm) and medium (M-FM41, 3.6 nm) pore size was observed, in that the incorporation of the CdS nanoparticles was decreased with increasing particle size and with decreasing pore size of the FM41. Chemical vapor deposition treatment employed to narrow the mesopores of the CdS-FM41 enhanced the stability of CdS nanoparticles against heat treatment. The CdS-FM41 composites demonstrated photocatalytic activity for H(2) generation from 2-propanol aqueous solution, the better photocatalytic activity being obtained with the larger pore size for CdS-L-FM41. Copyright 2001 Academic Press.     

中孔硅酸盐材料MCM-41的合成与表征研究(英文)

以十六烷基三甲基溴化铵为模板剂,硅酸钠为硅源,铝酸钠为铝源,在水热条件下成功地合成出了ＭＣＭ－４１中孔硅酸盐材料。采用ＸＲＤ、低温Ｎ２吸附脱附等测试手段对合成的ＭＣＭ－４１样品进行了表征。通过优化合成条件,合成出孔径３.２ ｎｍ、比表面９０４ｍ２／ｇ和孔壁厚约１.４６ ｎｍ的ＭＣＭ－４１分子筛。催化活性测定采用微反应活性实验来评价其活性和选择性。     

13C NMR characterization of the organic constituents in ligand-modified hexagonal mesoporous silicas: media for the synthesis of small, uniform-size gold nanoparticles

This paper reports the (13)C NMR characterization of functionalized MCM-41's and describes the chemistry that occurs in the pores of these materials in the process of forming gold nanoparticles. Nanoparticles formed on hexagonal mesoporous silica (MCM-41) by hydrogen reduction of chloroauric acid have little affinity for pure silica surfaces. The gold can be removed from the support with very mild treatment, for example, solvent extraction. The loss of gold from the substrate can be prevented using a pore functionalization methodology that entails synthesis of the silica containing polydentate amine functionality chemically bound in the mesopores. The synthetic scheme introduces solvents and templating reagents (surfactants) into the mesopores that are chemically reactive under the conditions required for gold particle formation. Extensive base-catalyzed elimination and nucleophilic substitution reactions involving the tetraalkylammonium surfactant occur during the reduction of chloroauric acid to gold.     

MCM-48介孔材料相转化合成的形成机制

利用水热合成的方法,使用新型的表面活性剂十六烷基三甲基对苯磺酸盐作为模板剂合成了高质量的MCM-48介孔分子筛,并用X-射线衍射(XRD)、扫描电镜(SEM)、高分辨透射电镜(HRTEM)以及N₂吸附-脱附进行了表征。合成过程的研究表明该合成体系经历了三相,起始相为具有六方对称性的MCM-41,随着加热时间的延长,生成了具有立方对称性的MCM-48,进一步延长加热时间则生成了层状相MCM-50。三相转变发生的核心驱动力来自于表面活性剂有效堆积参数g因子的改变。另外,XRD、傅立叶变换的红外光谱(FT-IR)以及固体魔角自旋核磁共振(²⁹Si MAS NMR)的表征结果证明：随着晶化时间的延长,相转变的同时伴随着介孔材料的孔壁逐渐由原子无序的非晶态向原子有序的晶态结构转变。最终形成的原子有序层状介孔分子筛可以作为扩孔型微孔分子筛合成的有效前驱体。     

NSAID naproxen in mesoporous matrix MCM-41: drug uptake and release properties

Hexagonally ordered mesoporous silica material MCM-41 (S_BET?=?1090?m²/g, pore size?=?31.2 ?) was synthesized and modified by 3-aminopropyl ligands. The differences in an uptake and subsequent release of anti-inflammatory drug naproxen from unmodified and amino modified MCM-41 samples were studied. The prepared materials were characterized by high resolution transmission electron microscopy (HRTEM) and scanning electron microscopy (SEM), nitrogen adsorption/desorption, Fourier-Transform Infrared Spectroscopy (FT-IR), Small-angle X-ray scattering (SAXS), thermoanalytical methods (TG/DTA) and elemental analysis. The amount of the drug released was monitored with thin layer chromatography (TLC) with densitometric detection in defined time intervals. The amounts of the released naproxen from mesoporous silica MCM-41/napro and amine-modified silica sample A-MCM-41/napro were 95 and 90% of naproxen after 72?h. In this study we compare the differences of release profiles from mesoporous silica MCM-41 and mesoporous silica SBA-15.     

有序介孔二氧化硅对正丁醛的吸附性能

合成了一系列具有不同孔结构与性质的有序介孔二氧化硅材料SBA-15、MCM-41、SBA-16、KIT-6, 同时通过改变水热温度制备了不同孔径大小的SBA-15, 并利用小角X射线散射、透射电镜、扫描电镜和氮气吸附-脱附等手段, 对其介孔结构进行了表征. 以正丁醛为探针分子, 考察了其对有机醛的吸附, 并与Y-沸石的吸附性能做了对比. 结果表明, 材料的介孔比表面积与其对正丁醛的吸附量成正比, 吸附等温线符合Langmuir 模型, 属于单层吸附, 具有最大介孔比表面积的MCM-41对正丁醛的吸附量最大(484 mg·g^-1). 最后将SBA-15添加到卷烟滤嘴中, 实验结果表明, SBA-15能显著降低卷烟烟气中巴豆醛的释放量.     

MCM-48介孔材料相转化合成的形成机制

利用水热合成的方法,使用新型的表面活性剂十六烷基三甲基对苯磺酸盐作为模板剂合成了高质量的MCM-48介孔分子筛,并用X-射线衍射(XRD)、扫描电镜(SEM)、高分辨透射电镜(HRTEM)以及N₂吸附-脱附进行了表征。合成过程的研究表明该合成体系经历了三相,起始相为具有六方对称性的MCM-41,随着加热时间的延长,生成了具有立方对称性的MCM-48,进一步延长加热时间则生成了层状相MCM-50。三相转变发生的核心驱动力来自于表面活性剂有效堆积参数g因子的改变,随着反应时间的延长,由于对甲基苯磺酸根离子（Tos^-）的流失,表面活性剂极性头所占的有效面积（a₀）明显减小,g值变大。另外,XRD、傅立叶变换的红外光谱(FT-IR)以及固体魔角自旋核磁共振(²⁹Si MAS NMR)的表征结果证明：随着晶化时间的延长,相转变的同时伴随着介孔材料的孔壁逐渐由原子无序的非晶态向原子有序的晶态结构转变。最终形成的原子有序层状介孔分子筛可以作为扩孔型微孔分子筛合成的有效前驱体。     

有序介孔二氧化硅对正丁醛的吸附性能

合成了一系列具有不同孔结构与性质的有序介孔二氧化硅材料SBA-15、MCM-41、SBA-16、KIT-6,同时通过改变水热温度制备了不同孔径大小的SBA-15,并利用小角X射线散射、透射电镜、扫描电镜和氮气吸附-脱附等手段,对其介孔结构进行了表征.以正丁醛为探针分子,考察了其对有机醛的吸附,并与Y-沸石的吸附性能做了对比.结果表明,材料的介孔比表面积与其对正丁醛的吸附量成正比,吸附等温线符合Langmuir模型,属于单层吸附,具有最大介孔比表面积的MCM-41对正丁醛的吸附量最大(484 mg·g-1).最后将SBA-15添加到卷烟滤嘴中,实验结果表明,SBA-15能显著降低卷烟烟气中巴豆醛的释放量.     

中孔沸石新材料MCM－41──Ⅰ．合成、酸性及稳定性

中孔沸石新材料ＭＣＭ－４１──Ⅰ．合成、酸性及稳定性赵修松，王清遐，徐龙伢，谢紊娟（中国科学院大连化学物理研究所，大连１１６０２３）李新生（中国科学院大连化学物理研究所催化基础国家重点实验室，大连１１６０２３）关键词ＭＣＭ－４１沸石，合成，酸性，稳定...     

共缩聚法制备有序介孔氧化硅纳米螺旋纤维

在传统球状介孔氧化硅合成工作的基础上,以正硅酸乙(TEOS)和γ-巯丙基三甲氧基硅烷(MPTMS)为硅源,在水体系下利用共缩聚法一步合成出具有介孔分子筛结构特征的纳米纤维,并通过扫描电子显微镜(SEM)、小角X射线衍(XRD)、透射电子显微镜(TEM)和氮气吸附-脱附实验对样品进行了表征与分析.     

Thermal analysis applied for the removal of surfactant from mesoporous molecular sieves MCM-41 synthesized from gold mine tailings slurry

The aim of the current study is to obtain the thermal behavior and kinetic analyses of the removal of surfactant from MCM-41 synthesized from tailings slurry at different heating rates. X-ray diffraction and thermogravimetric analyses were carried out to determine the characterization of the synthesized samples. Kissinger–Akahira–Sunose and Friedman isoconversional kinetic methods were applied for the purpose of determining the kinetic analysis parameters of the decomposition of surfactant from the mesoporous molecular sieves MCM-41 under non-isothermal conditions. For the comparison of these results, MCM-41 was synthesized from a pure silica source. The thermal behaviors of MCM-41 synthesized from tailings slurry do not differ from samples synthesized from pure silica during the decomposition reactions. The kinetic analysis’ results indicate that the decomposition reactions of the synthesized MCM-41 samples had complex reaction mechanisms.     

杂原子介孔Co-MCM-41分子筛的制备及其吸附脱氮性能

采用水热法合成了介孔MCM-41和Co-MCM-41分子筛,并利用XRD、FT-IR、低温N₂吸附-脱附和NH₃-TPD等方法对合成的分子筛进行了表征。考察了晶化时间、晶化温度、陈化时间对合成介孔Co-MCM-41分子筛的影响,确定较适宜的合成条件为陈化时间1 h,晶化温度110 ℃,晶化时间2 d。XRD 和FT-IR表征结果说明,Co原子已经进入MCM-41的骨架。MCM-41和Co-MCM-41的平均孔径均为2.82 nm,BET比表面积分别为986.42和 637.69 m²/g,孔容分别为0.762 1和0.537 2 m³/g。NH₃-TPD的表征结果表明,MCM-41和Co-MCM-41的酸性都较弱,但Co-MCM-41的酸性明显强于MCM-41。在此基础上,利用合成的MCM-41和Co-MCM-41吸附脱除氮含量为1 737.35 μg/g的模拟燃料中的喹啉。喹啉分子尺寸的模拟结果为0.711 6 nm × 0.500 2 nm,说明其可以很容易地进入MCM-41和Co-MCM-41的介孔孔道中。Co-MCM-41分子筛的氮脱除率明显高于MCM-41,这是由于其较强的酸性及与喹啉之间的化学吸附,而且,Co-MCM-41吸附脱氮具有较好的再生性能。