Effects of ionization on the phase behavior of poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide-co-acrylic acid) and poly(<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diethylacrylamide-co-acrylic acid) in water

Phase transitions of poly(N-isopropylacrylamide-co-acrylic acid) (PiPA-AA) and poly(N,N- diethylacrylamide-co-acrylic acid) (PdEA-AA) in water have been investigated by means of turbidimetry, Fourier transform infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC). The phase transition temperatures (T_p) of these copolymers increase with the degree of ionization () of the acrylic acid (AA) units, which in turn is dependent on the pH of the solutions. Apparent values of pK_a for the AA units, determined from the pH dependencies of T_p, are 4.7 and 5.4 for PiPA-AA and PdEA-AA, respectively. Differences between T_p for PiPA-AA and T_p for PiPA homopolymer (T_p) are +1.5 and –0.2 °C/mol% of AA at =1 and 0, respectively. The values of T_p for PdEA-AA are +2.6 (ionic) and –0.5 (nonionic)°C/mol%, indicating that the incorporated AA units have a larger effect on PdEA than on PiPA. DSC measurements performed with each of these copolymers at different pH values show a linear relationship between T_p and the enthalpy of transition (H). IR measurements of PiPA-AA show that the profiles of IR bands from both iPA and AA units exhibit critical changes at T_p of the copolymer. Heating the solution above T_p leads to shifts of the amide II, C–H stretch, and C–H bend bands from the iPA units toward lower wavenumbers, as well as a shift of the amide I band from the iPA units toward higher wavenumbers. A decrease in the intensity of the symmetric C=O stretch IR band from carboxylate anions (1560 cm^–1), and an increase in the intensity of the C=O stretch band from COOH groups (1705 cm^–1) suggest that a partial protonation of the carboxylate groups (COO^–+H⁺COOH) takes place upon the phase transition.     

Microscopic observation of the crystalline form of poly(<Emphasis Type="Italic">o</Emphasis>-methoxyaniline) on a membrane electrode

We describe electrochemical and microscopic (SEM) studies on the electrochemical polymerization of poly(o-methoxyaniline). The crystalline form of the polymer was obtained. The poly(o-methoxyaniline) crystals are formed on a membrane electrode from an acidic solution of the monomer. It is suggested that the pores of the membrane work as nuclear crystallization points.Contribution to the 3rd Baltic Conference on Electrochemistry, Gdansk-Sobieszewo, Poland, 23–26 April 2003Dedicated to the memory of Harry B. Mark, Jr. (28 February 1934–3 March 2003)     

Copolymers and two-layered composites of poly(<Emphasis Type="Italic">o</Emphasis>-aminophenol) and polyaniline

Electroactive conducting copolymers of aniline (ANI) and o-aminophenol (OAP) and two-layered poly(o-aminophenol) (POAP)/polyaniline (PANI) composites were prepared in aqueous acidic solution by electrode potential cycling. Copolymerization was carried out at different feed concentrations of OAP and ANI on a gold electrode. A strong inhibition of electropolymerization was found at a high molar fraction of OAP in the feed. The copolymers showed good adherence on the electrode surface and gave a redox response up to pH=10.0. Two transitions were observed in the in situ conductivities of the copolymers (as with PANI), but the conductivities were lower by 2.5–3 orders of magnitude as compared to PANI. Electrosynthesis of PANI on POAP modified electrodes showed copolymer formation after reaction initiation and finally formation of a PANI layer at the copolymer/solution interface. The ‘memory effect’ of the bilayer structures of both polymers was discussed in terms of protonation/deprotonation and anion consumption taking place during redox processes of both polymers.     

Study of the mechanism of redox transformations of sterically hindered <Emphasis Type="Italic">N</Emphasis>-aryl-<Emphasis Type="Italic">o</Emphasis>-iminoquinones

The mechanisms of redox transformations of sterically hindered [¹IBQ]-[³IBQ], 9,10-iminophenanthraquinone [⁴IFQ], and o-aminophenol [⁵AP] have been studied by cyclic voltammetry. It has been shown that the reduction process in tetrahydrofuran consists of two consecutive reversible steps leading to the formation of a radical anion and a dianion. In the case of acetonitrile, only the first redox process is detected, which involves the steps of protonation and electron addition resulting in the formation of a monoanion. Quantum-chemical calculations indicate a lower degree of participation of the six-membered nonaromatic carbon ring in the spin density delocalization in the o-iminosemiquinonate radical anions as compared to o-benzosemiquinonate radical anions. The oxidation of iminoquinones results in the formation of an unstable radical cation, which undergoes further chemical transformations. An increase in the acidity of a medium leads to the formation of protonated forms with the reduction potential being shifted anodically. The introduction of screening groups makes it possible to suppress side reactions of hydrolysis and cyclization of oxidized o-aminophenol [⁵AP] forms. Therefore, the major product of complete electrolysis is o-iminobenzoquinone [²IBQ].     

The electrochemical polymerization of <Emphasis Type="Italic">o</Emphasis>-phenylenediamine on <Emphasis Type="SmallCaps">l</Emphasis>-tyrosine functionalized glassy carbon electrode and its application

The polymerization of o-phenylenediamine (OPD) on l-tyrosine (Tyr) functionalized glassy carbon electrode (GCE) and its electro-catalytic oxidation towards ascorbic acid (AA) had been studied in this report. l-Tyrosine was first covalently grafted on GCE surface via electrochemical oxidation, which was followed by the electrochemical polymerization of OPD on the l-tyrosine functionalized GCE. Then, the poly(o-phenylenediamine)/l-tyrosine composite film modified GCE (POPD-Tyr/GCE) was obtained. X-ray photo-electron spectroscopy (XPS), field emission scanning electron microscope (SEM), and electrochemical techniques have been used to characterize the grafting of l-tyrosine and the polymerization and morphology of OPD film on GCE surface. Due to the doping of the carboxylic functionalities in l-tyrosine molecules, the POPD film showed good redox activity in neutral medium, and thus, the POPD-Tyr/GCE exhibited excellent electrocatalytic response to AA in 0.1 mol l⁻¹ phosphate buffer solution (PBS, pH 6.8). The anode peak potential of AA shifted from 0.58 V at GCE to 0.35 V at POPD-Tyr/GCE with a greatly enhanced current response. A linear calibration graph was obtained over the AA concentration range of 2.5 × 10⁻⁴–1.5 × 10^–3 mol l⁻¹ with a correlation coefficient of 0.9998. The detection limit (3δ) for AA was 9.2 × 10⁻⁵ mol l⁻¹. The modified electrode showed good stability and reproducibility and had been used for the determination of AA content in vitamin C tablet with satisfactory results.     

Crystal and molecular structure of 2-(<Emphasis Type="Italic">o</Emphasis>-hydroxyphenyl)-4,6-diphenylpyridine

Crystal and molecular structure of 2-(o-hydroxyphenyl)-4,6-diphenylpyridine C₂₃H₁₇NO (I) has been studied by single crystal XRD. The structure (monoclinic, space group P2₁/c, a = 8.757(2) Å, b = 20.682(4) Å, c = 9.743(2) Å, β = 108.14(2)°, Z = 4) was solved by the direct method and refined anisotropically in the full-matrix approximation to R = 0.076 using all 2660 measured independent reflections (automated diffractometer CAD-4, CuK_α). OH group of the molecule of I is disordered in the crystal over three positions with occupation factors 70%, 15% and 15%. The structure contains a very strong intramolecular hydrogen bond O-H?N disordered over three directions.     

A new strategy to prepare temperature-sensitive poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide) microgels

In this study, a new method was developed to prepare temperature-sensitive poly(N-isopropylacrylamide) microgels by free radical precipitation polymerization using siloxane coupling agent as the new crosslinker. Ammonium persulfate acted as the initiator for the radical copolymerization as well as the catalyst for the hydrolysis/condensation of the siloxane groups. The particle diameter and polydispersity of the microgels were measured by photon correlation spectroscopy and the results display that the microgels are monodisperse. The microgels exhibit temperature sensitivity and the phase transition temperature is approximately 31 °C. Furthermore, the diameter of the microgels changes upon heating and cooling processes. These were observed to be reversible. The novel crosslinking method described herein is the condensation of siloxane groups, which is totally different from the traditional double-vinyl crosslinkers. This innovative approach offers an alternative path to prepare functional core–shell particles and inorganic/organic hybrid materials.     

Temperature- and pressure-responsive properties of <Emphasis Type="SmallCaps">l</Emphasis>- and<Emphasis Type="SmallCaps"> dl</Emphasis>-forms of poly(<Emphasis Type="Italic">N</Emphasis>-(1-hydroxymethyl)propylmethacrylamide) in aqueous solutions

The structural transition of the l- and dl forms of poly(N-(1- hydroxymethyl)propylmethacrylamide (PHMPMA) in aqueous solution was studied by measuring the pressure dependence of the apparent scattering intensity, differential scanning calorimetry (DSC), and circular dichroism (CD). The thermodynamic implications of the results are discussed in relation to the chiral structure of the side chain, and differences in the thermal and barometric transitions. T-P diagrams of the transition showed characteristic ellipsoid features. Antagonism of the temperature and pressure effects was observed only for P(dl-HMPMA). For P(l-HMPMA), the transition temperature (T _tr) decreased with increasing pressure, and the highest T _tr was observed at atmospheric pressure (0.1 MPa). For both polymers, the highest P _trs were observed at the lowest temperatures. The l polymer showed a specific negative peak in its CD spectrum at around 220 nm in the lower temperature region and the temperature dependence was reproduced by a single-step transition, with the midpoint corresponding to the T _tr obtained from the scattering measurements. Coupled with the results from the DSC, the different behavior between the P(l-HMPMA) and P(dl-HMPMA) could be explained in terms of the chain states before and after the transition. The cooperative factors derived from the DSC measurement revealed that about 4 to 5 polymers of the present size were necessary to perform a thermal transition for P(l-HMPMA), and that P(dl-HMPMA) underwent its transition as an almost single molecular event.This revised version was published online in June 2005 with correction to the article category.     

Synthesis of amphiphilic diblock copolymers poly[2-(<Emphasis Type="Italic">N</Emphasis>, <Emphasis Type="Italic">N</Emphasis>-dimethylamino)ethyl methacrylate]-<Emphasis Type="Italic">b</Emphasis>-poly(stearyl methacrylate) and their self-assembly in mixed solvent

Amphiphilic diblock copolymers consisting of 2-(N, N-dimethylamino)ethyl methacrylate (DMAEMA, abbreviated as DMA) and stearyl methacrylate (SMA) with different degrees of polymerization and compositions were prepared by reversible addition–fragmentation chain transfer (RAFT) copolymerization. The composition and chemical structures of (co)polymers were confirmed by the measurements of ¹H NMR spectroscopy and gel permeation chromatography (GPC). The self-aggregating structures of amphiphilic diblock copolymers with the concentration of 0.1~0.3 wt.% in THF/water mixed solvent was investigated by transmission electron microscopy (TEM) and dynamic light scattering (DLS). It was found that both the morphologies and aggregating particle size resulted from the amphiphilic diblock copolymers depended on the variation of pH values, the lengths of the hydrophobic PSMA chains, and the weight ratio of THF/water mixed solvent.     

Transgenic expression of <Emphasis Type="Italic">Gluconacetobacter xylinus</Emphasis> strain ATCC 53582 cellulose synthase genes in the cyanobacterium <Emphasis Type="Italic">Synechococcus leopoliensis</Emphasis> strain UTCC 100

We report the transfer of cellulose synthesis genes (acsABΔC) from the heterotropic alpha proteobacterium, Gluconacetobacter xylinus strain ATCC 53582 to a photosynthetic microbe (Synechococcus leopoliensis strain UTCC 100). These genes were functionally expressed in this cyanobacterium, resulting in the production of non-crystalline cellulose. Although the cellulose lacks the structural integrity of the product synthesized by G. xylinus, the non-crystalline nature of the cyanobacterial cellulose makes it an ideal potential feedstock for biofuel production.     

Relationship between electrical resistivity and particle dispersion state for carbon black filled poly (ethylene-<Emphasis Type="Italic">co</Emphasis>-vinyl acetate)/poly (<Emphasis Type="SmallCaps">L</Emphasis>-lactic acid) blend

It is known that the electrical volume resistivity of insulating polymers filled with conductive fillers suddenly decreases at a certain content of filler. This phenomenon is called percolation. Therefore, it is known that controlling resistivity in the semi-conductive region for carbon black (CB) filled composites is very difficult. When poly (ethylene-co-vinyl acetate) (EVA) is used as a matrix, the percolation curve becomes gradual because CB particles disperse well in EVA. In this study, the relationship between the dispersion state of CB particles and electrical resistivity for EVA/poly (L-lactic acid) (PLLA) filled with CB composite was investigated. The apparent phase separation was seen in the SEM photograph. It was predicted that the CB particles located into the EVA phase in the light of thermodynamical consideration, which was estimated from the wetting coefficient between polymer matrix and CB particles. The total surface area per unit mass of dispersed CB particles in the polymer blend matrix was estimated from small-angle X-ray scattering and the volume resistivity decreased with increasing CB content. The values of the surface area of CB particles in CB filled EVA/PLLA (25/75 wt%) and EVA/PLLA (50/50 wt%) polymer blends showed a value similar to that of the CB filled EVA single polymer matrix. In electrical volume resistivity measurement, moreover, the slopes of percolation curves of EVA/PLLA (25/75 wt%) and EVA/PLLA (50/50 wt%) filled with CB composite are similar to that of EVA single polymer filled with CB composite. As a result, it was found that CB particles selectively locate in the EVA phase, and then the particle forms conductive networks similar to the networks in the case of EVA single polymer used as a matrix.     

The smallest Hosoya index in (<Emphasis Type="Italic">n</Emphasis>, <Emphasis Type="Italic">n</Emphasis> + 1)-graphs

A (n, n + 1)-graph G is a connected simple graph with n vertices and n + 1 edges. In this paper, we determine the lower bound for the Hosoya index in (n, n + 1)-graphs in terms of the order n, and characterize the (n, n + 1)-graph with the smallest Hosoya index.     

Electrochemical preparation and <Emphasis Type="Italic">in situ</Emphasis> characterization of poly(3-methylpyrrole) and poly(3-methylpyrrole-cyclodextrin) films on gold electrodes

A Electrosynthesis of conducting poly(3-methylpyrrole) (P3MPy) and poly(3-methylpyrrole-2,6-dimethyl-β-cyclodextrin) (poly(3MPy-β-DMCD)) films on a gold electrode in acetonitrile electrolyte solution containing lithium perchlorate has been carried out by potential cycling. Products were characterized with cyclic voltammetry CV, in situ UV-Vis spectroscopy, and in situ resistance measurements. Electrosynthesis of poly(3MPy-β-DMCD) started with a (1:1) (3MPy-β-DMCD) supramolecular cyclodextrin CD complex of 3-methylpyrrole characterized with proton NMR spectroscopy. The oxidation peak of poly(3MPy-β-DMCD) in CVs is shifted to more positive values than P3MPy. In situ resistance measurements show that the resistance of poly(3MPy-β-DMCD) is higher than of P3MPy by approximately an order of magnitude. Minimum resistance can be observed for P3MPy and poly(3MPy-β-DMCD) at 0.40 < E _Ag/AgCl < 1.10 V and 0.60 < E _Ag/AgCl < 1.10 V, respectively. The higher resistance of P3MPy compared with polypyrrole may result from the presence of the methyl group substituent resulting in a decreased conjugation length. When CD is present during synthesis, resistance is even higher. In situ UV-Vis spectroelectrochemical data for both films prepared potentiodynamically by cycling the potential in the range −0.20 < E _Ag/AgCl < 1.10 V in acetonitrile electrolyte show major effects of CD presence during electrosynthesis.      

Functional Expression of <Emphasis Type="Italic">Bacillus anthracis</Emphasis> Protective Antigen in <Emphasis Type="Italic">E. coli</Emphasis>

The protective antigen (PA) of Bacillus anthracis is a potent immunogen and an important candidate vaccine. In addition, it is used in monitoring systems like enzyme-linked immunosorbent assay to assess antibodies against PA in immunized subjects. The low level of PA production in B. anthracis and the difficulty of separating it from other bacterial components have made the researchers do different studies with the aim of producing recombinant PA (rPA). In this study, to produce rPA as a recombinant protein vaccine, the partial sequence of protective antigen of B. anthracis, amino acids 175–764, as a potent immunogenic target was inserted in pET21b(+). This is a prokaryotic plasmid that carries an N-terminal T7.tag sequence. The integrity of constructed plasmid was confirmed using restriction enzyme mapping. rPA was expressed after induction with isopropyl β-d-1-thiogalactopyranoside in Escherichia coli BL21. Purification of rPA was done with an affinity system using anti T7.tag antibody. Electrophoresis and Western blotting confirmed the specificity of the expressed protein. BALB/c mice were immunized with obtained PA protein and evaluation of specific immunoglobulin G antibodies against PA in sera using Western blotting method and showed that rPA is immunogenic. The challenge of immunized mice with virulent strain of B. anthracis showed that rPA is functional to protect against pathogenic strain.     

Interaction and Scale of Mixing in Cellulose Acetate/Poly(<Emphasis Type="Italic">N</Emphasis>-vinyl Pyrrolidone-co-vinyl Acetate) Blends

Binary blends and pseudo complexes of cellulose acetate (CA) with vinyl polymers containing N-vinyl pyrrolidone (VP) units, poly(N-vinyl pyrrolidone) (PVP) and poly(N-vinyl pyrrolidone-co-vinyl acetate) [P(VP-co-VAc)], were prepared, respectively, by casting from mixed polymer solutions in N,N-dimethylformamide as good solvent and by spontaneous co-precipitation from solutions in tetrahydrofuran as comparatively poor solvent. The scale of miscibility and intermolecular interaction were examined for the blends and complexes by solid-state ¹³C-NMR spectroscopy. It was revealed that the formation of complexes was due to a higher frequency of hydrogen-bonding interactions between the residual hydroxyl groups of CA and the carbonyl groups of VP residues in the vinyl polymer component. From measurements of CP/MAS spectra and proton spin-lattice relaxation times (T_1ρ^H) in the NMR study, the existence of the hydrogen-bonding interaction was also confirmed for the miscible blends and the homogeneity of the mixing was estimated to be substantially on a scale within a few nanometers.     

Lipids from <Emphasis Type="Italic">Halostachys caspica</Emphasis> and <Emphasis Type="Italic">Halocharis hispida</Emphasis>

The composition of lipids from the aerial parts of two species of halophytes from the family Chenopodiaceae, Halostachys caspica C. A. Mey. and Halocharis hispida Bge. was determined. Neutral lipids (NL, 62.1 and 54.2%, respectively) dominated the total lipids (TL) of these plants. More than a third of the NL were esters of aliphatic alcohols and phytosterols (FAE). Fatty acids 16:0, 18:1, and 18:2 dominated the acids of FAE; 16:0, 18:1, and 18:3, the phospholipids. The principal fatty acids of glycolipids were unsaturated acids (68.3 and 75.1%) with linolenic acid dominating (44.9 and 43.5%). Presented at the 7th International Symposium on the Chemistry of Natural Compounds, Tashkent, October 16–18, 2007. Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 276–278, May–June, 2009.     

Syntheses of (<Emphasis Type="Italic">E</Emphasis>)- and (<Emphasis Type="Italic">Z</Emphasis>)-3-styrylchromones

Several (E)- and (Z)-3-styrylchromones were prepared by two different methodologies, the Wittig reaction of chromone-3-carboxaldehyde with benzylic ylides and the Knoevenagel condensation of chromone-3-carboxaldehyde with phenylacetic acids in the presence of potassium tert-butoxide under microwave irradiation. The Knoevenagel reaction followed by a decarboxylation offered an efficient and diastereoselective method for preparing (E)-3-styrylchromones in a shorter reaction time. It was also demonstrated that phenylacetic acid can also be substituted with success by phenylmalonic acid. The stereochemistry of all products was assigned by NMR experiments. Correspondence: Artur M. S. Silva, Chemistry Department, University of Aveiro, 3810-193 Aveiro, Portugal.     

pH sensitivities of egg phosphatidylcholine liposomes and dioleoylphosphatidylethanolamine liposomes triggered by poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide-co-methacrylic acid-co-octadecylacrylate)

Egg phosphatidylcholine (PC) liposomes bearing pH-sensitive polymers and dioleoylphosphatidylethanolamine (DOPE) liposomes including the same polymers were prepared by a sonication method. As pH-sensitive polymers, copolymers of N-isopropylacrylamide, methacrylic acid, and octadecylacrylate were used. The liposomes were stable in neutral pH ranges in terms of release. But the release became marked at pH 5.5, and it was accelerated as pH further decreased. For example, the degree of release from egg PC liposomes (polymer/lipid ratio is 3:10, w/w) for 120 s increased from 2% to 63% as pH decreased from 7.5 to 4.5. Under the same condition, the degree of release from DOPE liposomes increased from 4% to 80%. These results indicate that DOPE liposome is more pH-sensitive than egg PC liposome.     

Synthesis of 6-methyl-8<Emphasis Type="Italic">H</Emphasis>-dibenzo[<Emphasis Type="Italic">a</Emphasis>,<Emphasis Type="Italic">g</Emphasis>]quinolizin-8-imines <Emphasis Type="Italic">via Reissert</Emphasis> compounds

Alkylation of Reissert compounds derived from 3-methylisoquinolines with several 2-cyanobenzylbromides followed by hydrolytic cleavage provided the corresponding 1-benzyl-3-methylisoquinolines. Treatment of the latter with methylmagnesiumiodide caused cyclization to the title compounds rather than formation of 2-acetylbenzylisoquinolines.     

Dynamics studies on thermoresponsive poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide) hydrogel in tetrahydrofuran/water mixtures

The properties of thermoresponsive poly(N-isopropylacrylamide) (PNIPAAm) hydrogel in tetrahydrofuran/H₂O mixtures were studied. Scanning electron microscopic (SEM) images demonstrate that the hydrogel changes from homogeneous to heterogeneous microstructure upon the addition of tetrahydrofuran to water. This heterogeneous PNIPAAm hydrogel in the mixture solvent exhibits a very slow response rate at temperatures above its lower critical solution temperature. The decreased response rate is attributed to the formation of special ternary complexes including the polymer and the two solvents in the tetrahydrofuran/H₂O mixture. Factors controlling the thermoresponse rate are discussed further and several suggestions are provided for designing and developing fast-response PNIPAAm hydrogels in the future.