Chloroaluminum phthalocyanine thin films: chemical reaction and molecular orientation

The chemical transformation of the polar chloroaluminum phthalocyanine, AlClPc, to μ-(oxo)bis(phthalocyaninato)aluminum(III), (PcAl)₂O, in thin films on indium tin oxide is studied and its influence on the molecular orientation is discussed. The studies were conducted using complementary spectroscopic techniques: Raman spectroscopy, X-ray photoelectron spectroscopy, and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. In addition, density functional theory calculations were performed in order to identify specific vibrations and to monitor the product formation. The thin films of AlClPc were annealed in controlled environmental conditions to obtain (PcAl)₂O. It is shown that the chemical transformation in the thin films can proceed only in the presence of water. The influence of the reaction and the annealing on the molecular orientation was studied with Raman spectroscopy and NEXAFS spectroscopy in total electron yield and partial electron yield modes. The comparison of the results obtained from these techniques allows the determination of the molecular orientation of the film as a function of the probing depth.

Thermal and chemical decomposition of di(pyrazine)silver(II) peroxydisulfate and unusual crystal structure of a Ag(I) by-product

High purity samples of a [Ag(pyrazine)(2)]S(2)O(8) complex were obtained using modified synthetic pathways. Di(pyrazine)silver(II) peroxydisulfate is sensitive to moisture forming [Ag(pyrazine)(2)](S(2)O(8))(H(2)O) hydrate which degrades over time yielding HSO(4)(-) derivatives and releasing oxygen. One polymorphic form of pyrazinium hydrogensulfate, β-(pyrazineH(+))(HSO(4)(-)), is found among the products of chemical decomposition together with unique [Ag(i)(pyrazine)](5)(H(2)O)(2)(HSO(4))(2)[H(SO(4))(2)]. Chemical degradation of [Ag(pyrazine)(2)]S(2)O(8) in the presence of trace amounts of moisture can explain the very low yield of wet synthesis (11-15%). Attempts have failed to obtain a mixed valence Ag(II)/Ag(I) pyrazine complex via partial chemical reduction of the [Ag(pyrazine)(2)]S(2)O(8) precursor with a variety of inorganic and organic reducing agents, or via controlled thermal decomposition. Thermal degradation of [Ag(pyrazine)(2)]S(2)O(8) containing occluded water proceeds at T > 90 °C via evolution of O(2); simultaneous release of pyrazine and SO(3) is observed during the next stages of thermal decomposition (120-285 °C), while Ag(2)SO(4) and Ag are obtained upon heating to 400-450 °C.     

Al2O3(1120) surface as a template for the ordered growth of Ni and Co nanoclusters

The morphology and thermal stability of Ni and Co nanoclusters grown by physical vapour deposition on a reconstructed (1120) surface of α-Al(2)O(3) is investigated using non-contact atomic force microscopy (NC-AFM). NC-AFM images reveal that the clean α-Al(2)O(3)(1120) substrate adopts a characteristic (12 × 4) reconstruction when prepared in vacuum at high temperature. Subsequent deposition of Ni and Co onto this substrate at room temperature facilitates the growth of well-ordered metal nanocluster arrays with a preferred inter-cluster distance determined by the (12 × 4) periodicity of the substrate surface. The order in the cluster arrangement remains intact even upon annealing the system to temperatures up to 500 °C indicating a high resistance against sintering. The reconstructed α-Al(2)O(3)(1120) surface can, therefore, serve as an appropriate insulating template for studies of size-dependent magnetic or catalytic effects in a well-defined ensemble of metallic nanoclusters.     

Porous ZnCo2O4 nanowires synthesis via sacrificial templates: high-performance anode materials of Li-ion batteries

A simple microemulsion-based method has been developed to synthesize ZnCo(2)(C(2)O(4))(3) nanowires that can be transformed to porous ZnCo(2)O(4) nanowires under annealing conditions. The morphology of porous ZnCo(2)O(4) nanowires can be tuned by the initial ZnCo(2)(C(2)O(4))(3) nanowires and the annealing temperatures. The as-synthesized porous ZnCo(2)O(4) nanowires have been applied as anode materials of Li-ion batteries, which show superior capacity and cycling performance. The porous one-dimensional (1D) nanostructures and large surface area are responsible for the superior performance. Moreover, it is indicated that porous ZnCo(2)O(4) nanowires synthesized at low annealing temperature (500 °C) show larger capacity and better cycling performance than that prepared at high annealing temperature (700 °C), because of their higher porosity and larger surface area.     

Surface structural evolution in iron oxide thin films

Ordered iron oxide ultrathin films were fabricated on a single-crystal Mo(110) substrate under ultrahigh vacuum conditions by either depositing Fe in ambient oxygen or oxidizing preprepared Fe(110) films. The surface structure and electronic structure of the iron oxide films were investigated by various surface analytical techniques. The results indicate surface structural transformations from metastable FeO(111) and O-terminated Fe(2)O(3)(0001) to Fe(3)O(4)(111) films, respectively. The former depends strongly on the oxygen pressure and substrate temperature, and the latter relies mostly upon the annealing temperature. Our experimental observations are helpful in understanding the mechanisms of surface structural evolution in iron oxides. The model surfaces of Fe-oxide films, particularly O-terminated surfaces, can be used for further investigation in chemical reactions (e.g., in catalysis).     

Transport in amorphous solid water films: implications for self-diffusivity

Thermal desorption spectroscopy is employed to examine transport mechanisms in structured, nanoscale films consisting of labeled amorphous solid water (ASW, H(2)(18)O, H(2)(16)O) and organic spacer layers (CCl(4), CHCl(3)) prior to ASW crystallization (T approximately 150-160 K). Self-transport is studied as a function of both the ASW layer and the organic spacer layer film thickness, and the effectiveness of these spacer layers as a bulk diffusion "barrier" is also investigated. Isothermal desorption measurements of structured films are combined with gas uptake measurements (CClF(2)H) to investigate water self-transport and changes in ASW film morphology during crystallization and annealing. CCl(4) desorption is employed as a means to investigate the effects of ASW film thickness and heating schedule on vapor-phase transport. Combined, these results demonstrate that the interlayer mixing observed near T approximately 150-160 K is inconsistent with a mechanism involving diffusion through a dense phase; rather, we propose that intermixing occurs via vapor-phase transport through an interconnected network of cracks/fractures created within the ASW film during crystallization. Consequently, the self-diffusivity of ASW prior to crystallization (T approximately 150-160 K) is significantly smaller than that expected for a "fragile" liquid, indicating that water undergoes either a glass transition or a fragile-to-strong transition at a temperature above 160 K.     

Epitaxial BaTiO3(100) films on Pt(100): a low-energy electron diffraction, scanning tunneling microscopy, and x-ray photoelectron spectroscopy study

The growth of epitaxial ultrathin BaTiO(3) films on a Pt(100) substrate has been studied by scanning tunneling microscopy (STM), low-energy electron diffraction (LEED), and x-ray photoelectron spectroscopy (XPS). The films have been prepared by radio-frequency-assisted magnetron sputter deposition at room temperature and develop a long-range order upon annealing at 900 K in O(2). By adjusting the Ar and O(2) partial pressures of the sputter gas, the stoichiometry was tuned to match that of a BaTiO(3)(100) single crystal as determined by XPS. STM reveals the growth of continuous BaTiO(3) films with unit cell high islands on top. With LEED already for monolayer thicknesses, the formation of a BaTiO(3)(100)-(1 × 1) structure has been observed. Films of 2-3 unit cell thickness show a brilliant (1 × 1) LEED pattern for which an extended set of LEED I-V data has been acquired. At temperatures above 1050 K the BaTiO(3) thin film starts to decay by formation of vacancy islands. In addition (4 × 4) and (3 × 3) surface reconstructions develop upon prolonged heating.     

Investigation on structures, luminescent and magnetic properties of Ln(III)-M (M = Fe(II)(HS), Co(II)) coordination polymers

The structures, luminescent and magnetic properties of three series of coordination polymers with formulas-{[Fe(3)Ln(2)(L(1))(6)(H(2)O)(6)]·xH(2)O}(n) (Ln = Pr-Er; 1-9), {[Co(3)Ln(2)(L(1))(6)(H(2)O)(6)]·yH(2)O}(n) (Ln = Pr-Dy, Yb; 10-17) and {[Co(2)Ln(L(2))(HL(2))(2)(H(2)O)(7)]·zH(2)O}(n) (Ln = Eu-Yb; 18-25) (H(2)L(1) = pyridine-2,6-dicarboxylic acid, H(3)L(2) = 4-hydroxyl-pyridine-2,6-dicarboxylic acid) were systematically explored in this contribution. [Fe(II)(HS)-L(1)-Ln(III)] (1-9) and [Co(II)-L(1)-Ln(III)] (10-17) series are isostructural, and display 3D porous networks with 1D nanosized channels constructed by Fe/Co-OCO-Ln linkages. Furthermore, two types of "water" pipes are observed in 1D channels. [Co(II)-L(2)-Ln(III)] (18-25) series exhibit 2D open frameworks based on double-stranded helical motifs, which are further assembled into 3D porous structures by intermolecular hydrogen bonds between hydroxyl groups. The variety of the resulting structures is mainly due to the HO-substitution effect. These 3D coordination polymers show considerably high thermal stability, and do not decomposed until 400 °C. The high-spin Fe(II) ion in [Fe(II)(HS)-L(1)-Ln(III)] was confirmed by X-ray photoelectron spectroscopy, M?ssbauer spectroscopy and magnetic studies. The luminescent spectra of coordination polymers associated with Sm(III), Eu(III), Tb(III) and Dy(III) were systematically investigated, and indicate that different d-metal ions in d-f systems may result in dissimilar luminescent properties. The magnetic properties of [Fe(II)(HS)-L(1)-Ln(III)] (3, 6, 7, 9, 13), [Co(II)-L(1)-Ln(III)] (15-17) and [Co(II)-L(2)-Ln(III)] (19-24) coordination polymers were also studied, and the χ(M)T values decrease with cooling. For the single ion behavior of Co(II) and Ln(III) ions, the magnetic coupling nature between Fe(II)(HS)/Co(II) and Ln(III) ions cannot be clearly depicted as antiferromagnetic coupling.     

Solvatomagnetism-induced Faraday effect in a cobalt hexacyanochromate-based magnet

Solvent exchange caused reversible variations in color, magnetic properties, and the Faraday spectra of Co(II)(1.5)[Cr(III)(CN)(6)].7.5H2O (1) prepared in water. Compound 1 turned from peach to deep blue, which was due to a change in the coordination geometry on Co(II) ion from six-coordinate pseudo-octahedral (OhCo(II)) to four-coordinate pseudo-tetrahedral (TdCo(II)) geometries, when it was immersed in EtOH. The confirmed formula for the deep blue powder was Co(II)(1.5)[Cr(III)(CN)(6)].2.5H2O.2.0EtOH. The magnetic properties also changed; that is, the magnetic critical temperature, saturation magnetization, and coercive field went from 25 to 18 K, from 7.0 to 5.5 micro(B), and from 240 to 120 G, respectively. This solvatomagnetism is because the ferromagnetic magnetic coupling between OhCo(II) (S = 3/2) and Cr(III) (S = 3/2) is replaced by the antiferromagnetic coupling between TdCo(II) (S = 3/2) and Cr(III) (S = 3/2). Accompanying the solvatochromism and solvatomagnetism, the Faraday spectra drastically changed. The Faraday ellipticity (FE) spectrum of 1 had a distorted dispersive peak (A), which is due to the 4T1g --> 4T1g, 2T1g transitions of OhCo(II) ion, around 480 nm, but the FE spectra of 2 showed a new dispersive-shaped band (B) at 580 nm. The observed B band was assigned to the 4A2 --> 4T2 transition of the TdCo(II) ion. The Faraday spectra were well reproduced by a simulation that considers the ligand field splitting, spin-orbital coupling, and the ferromagnetic ordering. These solvatochromic effects were repeatedly observed.     

An enantioenriched vanadium phosphonate generated via asymmetric chiral amplification of crystallization from achiral sources showing a single-crystal-to-single-crystal dehydration process

By using an asymmetrical 2-carboxyphenylphosphonate ligand (2-cpp(3-)), a chiral layered vanadium compound (VO)(3)(2-cpp)(2)(H(2)O)(6)·H(2)O (1) is isolated. The bulk sample is enantioenriched due to symmetry breaking on crystallization. Partial release of the coordination water molecules upon heating leads to a single-crystal-to-single-crystal transformation to compound [(VO)(3)(2-cpp)(2)(H(2)O)(4)] (1a) which is centrosymmetric.     

Ferromagnetism and chirality in two-dimensional cyanide-bridged bimetallic compounds

The combination of hexacyanoferrate(III) anions, [Fe(CN)(6)](3)(-), with nickel(II) complexes derived from the chiral ligand trans-cyclohexane-1,2-diamine (trans-chxn) affords the enantiopure layered compounds [Ni(trans-(1S,2S)-chxn)(2)](3)[Fe(CN)(6)](2).2H(2)O (1) and [Ni(trans-(1R,2R)-chxn)(2)](3)[Fe(CN)(6)](2).2H(2)O (2). These chiral systems behave as ferromagnets (T(c) = 13.8 K) with a relatively high coercive field (H(c) = 0.17 T) at 2 K. They also exhibit an unusual magnetic behavior at low temperatures that has been attributed to the dynamics of the magnetic domains in the ordered phase.     

Synthesis and characterization of magnetic poly(divinyl benzene)/Fe3O4, C/Fe3O4/Fe, and C/Fe onionlike fullerene micrometer-sized particles with a narrow size distribution

Magnetic poly(divinyl benzene)/Fe(3)O(4) microspheres with a narrow size distribution were produced by entrapping the iron pentacarbonyl precursor within the pores of uniform porous poly(divinyl benzene) microspheres prepared in our laboratory, followed by the decomposition in a sealed cell of the entrapped Fe(CO)(5) particles at 300 °C under an inert atmosphere. Magnetic onionlike fullerene microspheres with a narrow size distribution were produced by annealing the obtained PDVB/Fe(3)O(4) particles at 500, 600, 800, and 1100 °C, respectively, under an inert atmosphere. The formation of carbon graphitic layers at low temperatures such as 500 °C is unique and probably obtained because of the presence of the magnetic iron nanoparticles. The annealing temperature allowed control of the composition, size, size distribution, crystallinity, porosity, and magnetic properties of the produced magnetic microspheres.     

Cyano-bridged bimetallic assemblies from hexacyanometalate, [M(CN)6](3-) (M = Mn(III) and Fe(III)), and [M(N4-macrocycle)]2+ (M=Fe(III), Ni(II) and Zn(II)) building blocks. Syntheses, multidimensional structures, and magnetic properties

Reactions between [M(N(4)-macrocycle)](2+) (M = Zn(II) and Ni(II); macrocycle ligands are either CTH = d,l-5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane or cyclam = 1,4, 8, 11-tetrazaazaciclotetradecane) and [M(CN)(6)](3-) (M = Fe(III) and Mn(III)) give rise to cyano-bridged assemblies with 1D linear chain and 2D honeycomblike structures. The magnetic measurements on the 1D linear chain complex [Fe(cyclam)][Fe(CN)(6)].6H(2)O 1 points out its metamagnetic behavior, where the ferromagnetic interaction operates within the chain and the antiferromagnetic one between chains. The Neel temperature, T(N), is 5.5 K and the critical field at 2 K is 1 T. The unexpected ferromagnetic intrachain interaction can be rationalized on the basis of the axially elongated octahedral geometry of the low spin Fe(III) ion of the [Fe(cyclam)](3+) unit. The isostructural substitution of [Fe(CN)(6)](3-) by [Mn(CN)(6)](3-) in the previously reported complex [Ni(cyclam)](3)[Fe(CN)(6)](2).12H(2)O 2 leads to [Ni(cyclam)](3)[Mn(CN)(6)](2).16 H(2)O 3, which exhibits a corrugated 2D honeycomblike structure and a metamagnetic behavior with T(N) = 16 K and a critical field of 1 T. In the ferromagnetic phase (H > 1 T) this compound shows a very important coercitive field of 2900 G at 2 K. Compound [Ni(CTH)](3)[Fe(CN)(6)](2).13H(2)O 4, C(60)H(116)Fe(2)N(24)Ni(3)O(13), monoclinic, A 2/n, a = 20.462(7), b = 16.292(4), c = 27.262(7) A, beta = 101.29(4) degrees, Z = 4, also has a corrugated 2D honeycomblike structure and a ferromagnetic intralayer interaction, but, in contrast to 2 and 3, does not exhibit any magnetic ordering. This fact is likely due to the increase of the interlayer separation in this compound. ([Zn(cyclam)Fe(CN)(6)Zn(cyclam)] [Zn(cyclam)Fe(CN)(6)].22H(2)O.EtOH) 5, C(44)H(122)Fe(2)N(24)O(23)Zn(3), monoclinic, A 2/n, a = 14.5474(11), b = 37.056(2), c = 14.7173(13) A, beta = 93.94(1) degrees, Z = 4, presents an unique structure made of anionic linear chains containing alternating [Zn(cyclam)](2+) and [Fe(CN)(6)](3)(-) units and cationic trinuclear units [Zn(cyclam)Fe(CN)(6)Zn(cyclam)](+). Their magnetic properties agree well with those expected for two [Fe(CN)(6)](3-) units with spin-orbit coupling effect of the low spin iron(III) ions.     

Temperature-triggered fusion of vesicles composed of right-handed and left-handed amphiphilic helical peptides

Vesicles prepared from a mixture of (Sar)(25)-b-(L-Leu-Aib)(6) (SLL) and (Sar)(25)-b-(D-Leu-Aib)(6) (SDL) fused with themselves upon heating to 90 °C. The vesicles also fused with (Sar)(28)-b-(L-Leu-Aib)(8) vesicles upon heating to 90 °C. The temperature-triggered fusion was due to the phase transition of the mixed membrane of SLL and SDL at 90 °C and should be driven by the bending energy stored in the stereocomplex membrane upon taking a vesicular structure.     

Two mixed-valence vanadium(III,IV) phosphonoacetates with 16-ring channels: H2(DABCO)[V(IV)O(H2O)V(III)(OH)(O3PCH2CO2)2].2.5H2O and H2(PIP)[V(IVO)(H2O)V(III)(OH)(O3PCH2CO2)2].2.5H2O

Two isostructural mixed-valence vanadium phosphonoacetates H2(DABCO)[V(IV)O(H2O)V(III)(OH)(O3PCH2CO2)2].2.5H2O (1) and H2(PIP)[V(IV)O(H2O)V(III)(OH)(O3PCH2CO2)2].2.5H2O (2) have been synthesized. They crystallize in the orthorhombic space group Pnna with a = 7.0479(10) A, b = 15.307(2) A, and c = 17.537(3) A for 1 and a = 7.0465(9) A, b = 15.646(2) A, and c = 17.396(2) A for 2. X-ray single-crystal diffraction reveals that 1 and 2 have a three-dimensional open framework featuring 16-ring ellipsoid channels that are filled with doubly protonated 1,4-diazabicyclo[2,2,2]octanium/piperazinium cations and water molecules. According to the classification in metal-organic frameworks, 1 and 2 contain infinite (-O-V-)(infinity) chains that are cross-linked by "metalloligand" [VO(H2O)(O3PCH2CO2)2](4-) into a 3-D net of the sra topology. The temperature dependence of the magnetic susceptibility of 1 shows that the chi(m)T value in the range of 60-320 K is constant of 1.105 cm3 K mol(-1)/V2 unit, and upon further cooling, the chi(m)T value rapidly increases to 1.81 cm3 K mol(-1) at 2 K. The corresponding effective magnetic moment (mu(eff))/V2 unit varies from 2.97 mu(B) at 320 K to 3.80 mu(B) at 2 K. The magnetic data in the range of 2-320 K follow the Curie-Weiss law with C = 1.074 cm3 K mol(-1) and Theta= -1.34 K.     

Synthesis, structure, and magnetic properties of a Mn(21) single-molecule magnet

The reaction of [Mn(3)O(O(2)CMe)(6)(py)(3)](ClO(4)) (1; 3Mn(III)) with [Mn(10)O(4)(OH)(2)(O(2)CMe)(8)(hmp)(8)](ClO(4))(4) (2; 10Mn(III)) in MeCN affords the new mixed-valent complex [Mn(21)O(14)(OH)(2)(O(2)CMe)(16)(hmp)(8)(pic)(2)(py)(H(2)O)](ClO(4))(4) (3; 3Mn(II)-18Mn(III); hmp(-) is the anion of 2-(hydroxymethyl)pyridine), with an average Mn oxidation state of +2.85. Complex 3.7MeCN crystallizes in the triclinic space group P. The structure consists of a low symmetry [Mn(21)(micro(4)-O)(4)(micro(3)-O)(12)(micro-O)(16)] core, with peripheral ligation provided by 16 MeCO(2)(-), 8 hmp(-), and 2 pic(-) groups and one molecule each of water and pyridine. The magnetic properties of 3 were investigated by both dc and ac magnetic susceptibility measurements. Fitting of dc magnetization data collected in the 0.1-0.8 T and 1.8-4.0 K ranges gave S = (17)/(2), D approximately -0.086 cm(-)(1), and g approximately 1.8, where S is the molecular spin of the Mn(21) complex and D is the axial zero-field splitting parameter. ac susceptibility studies in the 10-997 Hz frequency range reveal the presence of a frequency-dependent out-of-phase ac magnetic susceptibility (chi(M)' ') signal consistent with slow magnetization relaxation rates. Fitting of dc magnetization decay versus time data to the Arrhenius equation gave a value of the effective barrier to relaxation (U(eff)) of 13.2 K. Magnetization versus applied dc field sweeps exhibited hysteresis. Thus, complex 3 is a new member of the small but growing family of single-molecule magnets.     

Incorporating C2 into C60 films

The material formed by depositing C(2)(-) anions onto/into thin C(60) films (on graphite) at room temperature has been studied by means of thermal desorption mass spectroscopy, ultraviolet photoionization spectroscopy, atomic force microscopy (AFM), and surface enhanced Raman spectroscopy. As-prepared, C(2)/C(60) films manifest thermal desorption behaviour which differs significantly from pure C(60) films. Whereas the latter can be fully sublimed, we observe decomposition of C(2)/C(60) films to a high-temperature-stable material while predominantly C(60), C(62), and C(64) are desorbed in parallel. Deposition of C(2)(-) also leads to significantly modified electronic and vibrational properties. Based on DFT model calculations of the Raman spectra, we suggest that as-prepared C(2)/C(60) films contain appreciable amounts of polymeric networks comprising -C(2)-C(60)-C(2)-C(60)- chains. Detection of sublimed C(62) and C(64) upon heating implies that thermal decomposition of C(2)/C(60) films involves addition/uptake of C(2) units into individual fullerene cages. Correspondingly, annealing films up to various intermediate temperatures results in significant modifications to valence-band UP spectra as well as to surface topographies as imaged by AFM. The novel carbonaceous material obtained by heating to T > 950 K has a finite density of states at the Fermi level in contrast to as-prepared C(2)/C(60). It comprises fused fullerene cages.     

Synthesis and magnetic properties of 3-D [Ru(II/III)(2)(O(2)CMe)(4)](3)[M(III)(CN)(6)] (M = Cr,Fe, Co)

Three-dimensional network structures of [Ru(II/III)(2)(O(2)CMe)(4)](3)[M(III)(CN)(6)] (M = Cr, Fe, Co) composition have been formed and their magnetic properties characterized. [Ru(II/III)(2)(O(2)CMe)(4)](3)[M(III)(CN)(6)] (M = Cr, Fe, Co) have nu(CN) IR absorptions at 2138, 2116, and 2125 cm(-1) and have body-centered unit cells (a = 13.34, 13.30, and 13.10 A, respectively) with -M-Ctbd1;N-Ru=Ru-Ntbd1;C-M- linkages along all three Cartesian axes. [Ru(II/III)(2)(O(2)CMe)(4)](3)[Cr(III)(CN)(6)] magnetically orders as a ferrimagnet (T(c) = 33 K) and has an unusual constricted hysteresis loop.     

Temperature dependent crystallographic transformations in chalcedony, SiO2, assessed in mid infrared spectroscopy

Chalcedony consists of hydroxylated 50-100 nanometre measuring α-quartz (SiO(2)) crystallites that lose their surface silanole groups (Si-OH) upon heating between 350°C and 600°C. The loss of the chalcedony's ≈1% of silanole groups allows for the healing of water related defects in the crystallites. We investigated these crystallographic transformations using Fourier Transform mid Infrared Spectroscopy in direct transmission, Attenuated Total Reflection (ATR) and the reflectivity. We found that an absorption band that is specific for chalcedony at 555 cm(-1) disappears gradually upon heating between 350°C and 600°C. The reduction of the band is correlated to the loss of surface silanoles. This result leads to the assignment of the band to free Si-O vibrations in non bridging Si-OH groups that have a lower natural frequency than Si-O vibrations in bridging Si-O-Si. The recognition of a silanole signal in the mid infrared allows for an easy, cheap and rapid recognition of hydroxyl in chalcedony.     

Single-molecule magnets: structural characterization, magnetic properties, and (19)F NMR spectroscopy of a Mn(12) family spanning three oxidation levels

The syntheses, crystal structures, and magnetic properties of [Mn(12)O(12)(O(2)CC(6)F(5))(16)(H(2)O)(4)] (2), (NMe(4))[Mn(12)O(12)(O(2)CC(6)F(5))(16)(H(2)O)(4)] (3), and (NMe(4))(2)[Mn(12)O(12)(O(2)CC(6)F(5))(16)(H(2)O)(4)] (4) are reported. Complex 2 displays quasi-reversible redox couples when examined by cyclic voltammetry in CH(2)Cl(2): one-electron reductions are observed at 0.64 and 0.30 V vs ferrocene. The reaction of complex 2 with 1 and 2 equiv of NMe(4)I yields the one- and two-electron reduced analogues, 3 and 4, respectively. Complexes 2.3CH(2)Cl(2), 3.4.5CH(2)Cl(2).(1)/(2)H(2)O, and 4.6C(7)H(8) crystallize in the triclinic P, monoclinic P2/c, and monoclinic C2/c space groups, respectively. The molecular structures are all very similar, consisting of a central [Mn(IV)O(4)] cubane surrounded by a nonplanar alternating ring of eight Mn and eight mu(3)-O(2)(-) ions. Peripheral ligation is provided by 16 bridging C(6)F(5)CO(2)(-) and 4 H(2)O ligands. Bond valence sum calculations establish that the added electrons in 3 and 4 are localized on former Mn(III) ions giving trapped-valence Mn(IV)(4)Mn(III)(7)Mn(II) and Mn(IV)(4)Mn(III)(6)Mn(II)(2) anions, respectively. (19)F NMR spectroscopy in CD(2)Cl(2) shows retention of the solid-state structure upon dissolution and detrapping of the added electrons in 3 and 4 among the outer ring of Mn ions on the (19)F NMR time scale. DC studies on dried microcrystalline samples of 2, 3, and 4.2.5C(7)H(8) restrained in eicosane in the 1.80-10.0 K and 1-70 kG ranges were fit to give S = 10, D = -0.40 cm(-)(1), g = 1.87, D/g = 0.21 cm(-)(1) for 2, S = 19/2, D = -0.34 cm(-)(1), g = 2.04, D/g = 0.17 cm(-)(1) for 3, and S = 10, D = -0.29 cm(-)(1), g = 2.05, D/g = 0.14 cm(-)(1) for 4, where D is the axial zero-field splitting parameter. The clusters exhibit out-of-phase AC susceptibility signals (chi(M)' ') indicative of slow magnetization relaxation in the 6-8 K range for 2, 4-6 K range for 3, and 2-4 K range for 4; the shift to lower temperatures reflects the decreasing magnetic anisotropy upon successive reduction and, hence, the decreasing energy barrier to magnetization relaxation. Relaxation rate vs T data obtained from chi(M)' ' vs AC oscillation frequency studies down to 1.8 K were combined with rate vs T data from DC magnetization decay vs time measurements at lower temperatures to generate an Arrhenius plot from which the effective barrier (U(eff)) to magnetization reversal was obtained; the U(eff) values are 59 K for 2, 49 and 21 K for the slower- and faster-relaxing species of 3, respectively, and 25 K for 4. Hysteresis loops obtained from single-crystal magnetization vs DC field scans are typical of single-molecule magnets with the coercivities increasing with decreasing T and increasing field sweep rate and containing steps caused by the quantum tunneling of magnetization (QTM). The step separations gave D/g values of 0.22 cm(-)(1) for 2, 0.15 and 0.042 cm(-)(1) for the slower- and faster-relaxing species of 3, and 0.15 cm(-)(1) for 4.