Synthesis, characterization and standard molar enthalpy of formation of La(C7H5O3)2·(C9H6NO)

The product from reaction of lanthanum chloride seven-hydrate with salicylic acid and 8-hydroxyquinoline, La(C₇H₅O₃)₂·(C₉H₆NO), was characterized by IR, elemental analysis, molar conductance, and thermogravimetric analysis. The standard molar enthalpies of solution of [LaCl₃·7H₂O (s)], [2C₇H₆O₃ (s)], [C₉H₇NO (s)] and [La(C₇H₅O₃)₂·(C₉H₆NO) (s)] in a mixed solvent of absolute ethyl alcohol, dimethyl formamide (DMF) and perchloric acid were determined by calorimetry to be [LaCl₃·7H₂O (s), 298.15 K] = −96.45 ± 0.18 kJ mol⁻¹, [2C₇H₆O₃ (s), 298.15 K] = 14.99 ± 0.17 kJ mol⁻¹, [C₉H₇NO (s), 298.15 K] = −3.86 ± 0.06 kJ mol⁻¹ and [La(C₇H₅O₃)₂·(C₉H₆NO) (s), 298.15 K] = −117.78 ± 0.11 kJ mol⁻¹. The enthalpy change of the reaction

(1)     

Standard molar enthalpies of formation of Ln(C9H6NO)2(C2H3O2) (Ln: Nd, Sm)

Using an on-line solution-reaction isoperibol calorimeter, the standard molar enthalpies of reaction for the general thermochemical reaction: LnCl₃·6H₂O(s) + 2C₉H₇NO(s) + CH₃COONa(s) = Ln(C₉H₆NO)₂(C₂H₃O₂)(s) + NaCl(s) + 2HCl(g) + 6H₂O(l) (Ln: Nd, Sm), were determined at T=298.15 K, as  kJ mol^−l, respectively. From the mentioned standard molar enthalpies of reaction and other auxiliary thermodynamic quantities, the standard molar enthalpies of formation of Ln(C₉H₆NO)₂(C₂H₃O₂)(s) (Ln: Nd, Sm), at T=298.15 K, have been derived to be: −(1494.7±3.3) and −(1501.5±3.4) kJ mol^−l, respectively.     

Thermochemical studies of 1-hydroxyisoquinoline, 5-hydroxyisoquinoline and 1,5-dihydroxyisoquinoline

The standard (p^° = 0.1 MPa) molar enthalpies of formation, , for crystalline 1-hydroxyisoquinoline, 5-hydroxyisoquinoline and 1,5-diidroxyisoquinoline, were derived from the standard molar enthalpies of combustion, in oxygen, at the temperature 298.15 K, measured by static bomb-combustion calorimetry. The standard molar enthalpies of sublimation, , at T = 298.15 K, were determined by Calvet microcalorimetry. The results were as follows:

1-Hydroxyisoquinoline	4395.1 ± 1.5	113.6 ± 2.2
5-Hydroxyisoquinoline	4455.2 ± 1.9	109.6 ± 2.1
1,5-Dihydroxyisoquinoline	4194.1 ± 2.2	123.6 ± 2.2

Full-size table

     

Enthalpies of dilution of aqueous Li2B4O7 solutions at 298.15 K and application of ion-interaction model

The enthalpies of dilution have been measured for aqueous Li₂B₄O₇ solutions from 0.0212 to 2.1530 mol kg⁻¹ at 298.15 K. The relative apparent molar enthalpies, L_?, and relative partial molar enthalpies of the solvent and solute, and were calculated. The thermodynamic properties of the complex aqueous solutions were represented with a modified Pitzer ion-interaction model.     

Thermodynamic studies on SrFe12O19(s), SrFe2O4(s), Sr2Fe2O5(s) and Sr3Fe2O6(s)

The citrate-nitrate gel combustion route was used to prepare SrFe₂O₄(s), Sr₂Fe₂O₅(s) and Sr₃Fe₂O₆(s) powders and the compounds were characterized by X-ray diffraction analysis. Different solid-state electrochemical cells were used for the measurement of emf as a function of temperature from 970 to 1151 K. The standard molar Gibbs energies of formation of these ternary oxides were calculated as a function of temperature from the emf data and are represented as (SrFe₂O₄, s, T)/kJ mol⁻¹ (±1.7)=−1494.8+0.3754 (T/K) (970?T/K?1151). (Sr₂Fe₂O₅, s, T)/kJ mol⁻¹ (±3.0)=−2119.3+0.4461 (T/K) (970?T/K?1149). (Sr₃Fe₂O₆, s, T)/kJ mol⁻¹ (±7.3)=−2719.8+0.4974 (T/K) (969?T/K?1150).Standard molar heat capacities of these ternary oxides were determined from 310 to 820 K using a heat flux type differential scanning calorimeter (DSC). Based on second law analysis and using the thermodynamic database FactSage software, thermodynamic functions such as Δ_fH°(298.15 K), S°(298.15 K) S°(T), C_p°(T), H°(T), {H°(T)-H°(298.15 K)}, G°(T), free energy function (fef), Δ_fH°(T) and Δ_fG°(T) for these ternary oxides were also calculated from 298 to 1000 K.     

Standard enthalpy of formation of aqueous titanyl chloride, TiOCl2(aq), at T = 298.15 K

Enthalpies of solution of TiCl₄(l) in aqueous perchloric acid have been measured in an isothermal calorimeter at T = 298.15 K at ionic strengths of (1.964, 3.002, and 4.062) mol · kg⁻¹. These results were extrapolated to zero ionic strength using an extended Debye-Hückel equation, to yield the standard enthalpy of solution ; from which the standard partial molar enthalpy of formation of the titanyl ion was derived: .     

Low-temperature heat-capacity and standard molar enthalpy of formation of copper l-threonate hydrate Cu(C4H6O5)·0.5H2O(s)

The solid copper l-threonate hydrate, Cu(C₄H₆O₅)·0.5H₂O, was synthesized by the reaction of l-threonic acid with copper dihydrocarbonate and characterized by means of chemical and elemental analyses, IR and TG-DTG. Low-temperature heat-capacity of the title compound has been precisely measured with a small sample precise automated adiabatic calorimeter over the temperature range from 77 to 390 K. An obvious process of the dehydration occurred in the temperature range between 353 and 370 K. The peak temperature of the dehydration of the compound has been observed to be 369.304 ± 0.208 K by means of the heat-capacity measurements. The molar enthalpy, Δ_dH_m, of the dehydration of the resulting compound was of 16.490 ± 0.063 kJ mol⁻¹. The experimental molar heat capacities of the solid from 77 to 353 K and the solid from 370 to 390 K have been, respectively, fitted to tow polynomial equations with the reduced temperatures by least square method. The constant-volume energy of combustion of the compound, Δ_cU_m, has been determined as being −1616.15 ± 0.72 kJ mol⁻¹ by an RBC-II precision rotating-bomb combustion calorimeter at 298.15 K. The standard molar enthalpy of formation of the compound, , has been calculated to be −1114.76 ± 0.81 kJ mol⁻¹ from the combination of the data of standard molar enthalpy of combustion of the compound with other auxiliary thermodynamic quantities.     

Synthesis, crystal structure and thermochemical behaviour of a barium complex [Ba(5-OH-BDC)(H2O)3] [5-OH-H2BDC = 5-hydroxyisophtalic acid]

A novel complex [Ba(5-OH-BDC)(H₂O)₃] [5-OH-H₂BDC = 5-hydroxyisophtalic acid] was synthesized and characterized by X-ray crystallography. The complex is Monoclinic P2₁/c, a = 11.1069(4), b = 14.8192(6), c = 6.5005(2) Å, β = 103.465(3)° and Z = 4, which exhibits a three-dimensional framework formed by linkage of adjacent two-dimensional (6, 3) layers via intermolecular hydrogen bonds. The title complex has been studied by IR spectrum and TG-DTG. The constant-volume combustion energy of the complex, Δ_cU, was determined as being (−3210.45 ± 1.41) kJ mol⁻¹ by a precise rotating-bomb calorimeter at 298.15 K. The standard enthalpy of combustion, , and the standard enthalpy of formation, , were calculated as being (−3207.97 ± 1.41) and (−1922.80 ± 1.76) kJ mol⁻¹, respectively. A calculation model for determining the specific heat capacity of the complex with an improved RD496-III microcalorimeter is also derived. The specific heat capacity of the complex was (6158.387 ± 0.187) J mol⁻¹ K⁻¹.     

Thermodynamic properties of lithium mica: Lepidolite

Calorimetric measurements were made on natural sample of lepidolite having the composition (K_0.80Na_0.05Ca_0.07Rb_0.16Cs_0.03)(Li_1.34Al_1.40Fe³⁺_0.01)[Si_3.25Al_0.75O₁₀]F_1.80(OH)_0.20 from Na-Li-type rare-element-rich pegmatites of East Sayany, Russia. High-temperature enthalpy increments were measured with a Tian-Calvet calorimeter at 444-972 K using the drop method. The resultant (T) equation in the interval T = 298.15-972 K was calculated:  = 316.10 + 228.12 × 10⁻³ T − 50.10 × 10⁵ T⁻² (J K⁻¹ mol⁻¹) [± 0.4%] and the value of (298.15 K) = 327.8 J K⁻¹ mol⁻¹ was obtained. The standard molar enthalpy of formation from the elements was determined by high-temperature drop solution calorimetry in molten lead borate at T = 973 K. The value of Δ_f(298.15 K) for lepidolite was found to be −6201 ± 18 kJ mol⁻¹. The thermodynamic properties of lepidolite of idealized composition KLi_1.5Al_1.5[Si₃AlO₁₀]F₂ were estimated based on the experimental data obtained.     

Phase polymorphism of [Zn(DMSO)6](ClO4)2 studied by differential scanning calorimetry

Four solid phases of [Zn(DMSO)₆](ClO₄)₂ have been detected by differential scanning calorimetry (DSC). Specifically, the phase transitions were detected between: metastable phase KII ↔ supercooled phase K0 at , stable phase KIb ↔ stable phase KIa at , stable phase KIa ↔ stable phase K0 at . At T_m2 = 389 K crystals partially and at T_m1 = 465 K completely melts. From the entropy change values it was concluded that the phases: K0 and K0′ are the orientationally dynamically disordered phases, so called ODDIC crystals, and phases KIa, KIb and metastable KII are dynamically ordered but with some degree of positional disorder.     

Ferromagnetic-phase transition in the spinel-type CuCr2Te4

Ferromagnetic-phase transition in spinel-type CuCr₂Te₄ has been clearly observed. CuCr₂Te₄ is a telluride-spinel with the lattice constant , which has been synthesized successfully. The heat capacity exhibits a sharp peak due to the ferromagnetic-phase transition with the Curie temperature . This value of T_C corresponds exactly to that of the negative peak of dM/dT in low field of 1.0 Oe. The magnetic susceptibility shows the Curie-Weiss behavior between 380 and 650 K with the effective magnetic moment /Cr-ion and the Weiss constant . The low temperature magnetization indicates the spin-wave excitations, where the existence of first term of Bloch T^3/2 law and the next T^5/2 term are verified experimentally. This spin-wave excitation is detected up to approximately 250 K which is a fairly high temperature.     

The H2O-D2O solvent isotope effects on the molar volumes of alkali-chloride solutions at T = (288.15, 298.15, and 308.15) K

Densities of LiCl, NaCl, KCl, and CsCl in normal and heavy water solutions have been measured using a vibrating-tube densitometer with (1-2) · 10⁻⁶ precision at T = (288.15, 298.15, and 308.15) K over a wide concentration range from (0.1 to 5) molal, m. Solvent isotope effects (IE) on apparent molar volumes, as well as both on solute- and solvent-partial molar volumes were evaluated to establish their trend with cationic size in a systematic way. With the exception of the LiCl, both the “normal” standard IEs, , and the “inverse” excess IEs of the solutes, , increase linearly with the electrostriction effect of the cations (1/r_ion), while with increasing temperature and/or concentration, the excess effects become almost the same.In contrast to the solute excess IEs, which show linear m^1/2-dependence over the whole concentration range, except for LiCl, the “inverse” excess IEs of the solvent, , hardly change over the lower concentration range (, m ? 1). However, with further increase of the concentration, these IEs significantly decrease. Individual ionic standard and excess volume contributions are derived and the results are discussed in terms of structural concepts of ionic hydration.     

Magnetic and transport properties of RCr0.3Ge2 (R=Tb, Dy, Ho and Er) compounds

The magnetic and transport properties of ternary rare-earth chromium germanides RCr_0.3Ge₂ (R=Y and Tb-Er) have been determined. X-ray and neutron diffraction studies indicate that these compounds have the CeNiSi₂-type structure (space group Cmcm) [1]. Magnetic measurements reveal the antiferromagnetic ordering below T_N equal to 18.5 K (R=Tb), 11.8 K (Dy), 5.8 K (Ho) and 3.4 K (Er). From the neutron diffraction data the magnetic structures have been determined. For TbCr_0.3Ge₂ and DyCr_0.3Ge₂ at low temperatures the magnetic ordering can be described by two vectors k₁=(,0,0) and k₂=(,0,), and k₁′=(,0,0) and k₂′=(,0,), respectively. In HoCr_0.3Ge₂ and ErCr_0.3Ge₂ the ordering can be described by one propagation vector equal to (,,0) and (0,0,0.4187(2)), respectively. In DyCr_0.3Ge₂ some change in the magnetic ordering is observed at T_t=5.1 K. In temperature range from T_t to T_N the magnetic ordering is given by one propagation vector k=(,0,0). YCr_0.3Ge₂ is a Pauli paramagnet down to 1.72 K which suggests that in the entire RCr_0.3Ge₂ series the Cr atoms do not carry magnetic moments. All compounds studied exhibit metallic character of the electrical conductivity. The temperature dependencies of the lattice parameters reveal strong magnetostriction effect at the respective Nèel temperatures.     

Density and speed of sound of lithium bromide with organic solvents: Measurement and correlation

Densities, ρ, and speed of sound, u, of the solutions of LiBr with non-aqueous solvents (methanol, ethanol, 2-propanol, acetone, and acetonitrile) having a wide range of dielectric constants were measured at T = 298.15 K. Also, these measurements were made for the system (LiBr + N,N-dimethylacetamide) at T = 323.15 K. For the investigated systems, the limiting values for apparent molar volume, , and the apparent molar isentropic compressibility, , were obtained from the Redlich-Mayer and an abbreviated form of the Pitzer equations. The Pitzer and NRTL equations were satisfactorily used for the correlation of apparent molar volumes, V_?, and the apparent molar isentropic compressibility, κ_?, values of the studied systems.     

Thermodynamic studies on the interactions of diglycine with magnesium chloride in aqueous medium at different temperatures

Apparent molar heat capacities (C_P2,?), apparent molar volumes (V_2,?), and viscosities (η) of diglycine in water and in aqueous magnesium chloride (MgCl₂) solutions of molality m_S ≈ (0.05 to 0.70) mol · kg⁻¹ over the temperature range T = (288.15 to 328.15) K have been determined using high sensitivity micro-differential scanning calorimeter, vibrating-tube digital density meter, and automatic viscosity measuring unit (AVS 350), respectively. The data have been used to calculate the partial molar heat capacities and partial molar volumes at infinite dilution. The viscosity B-coefficients have also been obtained from viscosity data using Jones-Dole equation. The and values of diglycine in aqueous MgCl₂ solutions are higher than those in water and thus exhibit positive transfer functions ( and ), which are indicative of strong interactions between diglycine and MgCl₂. Corresponding viscosity B-coefficients of transfer are also generally positive. The transfer functions decrease with increase in temperature and increase with the concentration of MgCl₂. The free energies, enthalpies and entropies of activation for viscous flow of diglycine in aqueous MgCl₂ solutions have been obtained by using the Feakins transition-state theory. Partial molar expansibilities and at infinite dilution along with their temperature dependence, the interaction coefficients from the volume, heat capacity, and viscosity B-coefficients have been used to divulge the various kinds of plausible interactions between solute (diglycine) and cosolute (MgCl₂) in solutions.     

PrCo2Al8 and Pr2Co6Al19: Crystal structure and electronic properties

The praseodymium cobalt aluminides, PrCo₂Al₈ and Pr₂Co₆Al₁₉, were prepared by reaction of the elemental components in an arc-melting furnace, followed by heat treatment at 900 °C for several days. Their chemical composition was checked by scanning electron microscopy and energy dispersive spectroscopy, and their crystal structure was refined from single crystal X-ray diffraction data. PrCo₂Al₈ adopts the CaCo₂Al₈ type of structure, crystallizing with the orthorhombic space group Pbam, with four formula units in a cell of dimensions at room temperature: , , . Pr₂Co₆Al₁₉ crystallizes in the monoclinic space group C2/m, with four formula units in a cell of dimensions at room temperature: , , and β=103.903(1)°. Its structure belongs to the U₂Co₆Al₁₉ type. The crystal structures of both compounds studied can be viewed as three-dimensional structures resulting from the packing of Al polyhedra centred by the transition elements. Along the c-axis, the coordination polyhedra around the Pr atoms pack by face sharing to form strands, which are separated one from another by an extended Co-Al network. Magnetic measurements have revealed that PrCo₂Al₈ orders antiferromagnetically at , with a clear metamagnetic transition occurring at a critical field H_c=0.9(1) T. The temperature dependence of the susceptibility of Pr₂Co₆Al₁₉ does not provide any evidence for long-range magnetic ordering in the temperature domain 1.7-300 K. At low temperatures (T<10 K), the susceptibility saturates in a manner characteristic of a non-magnetic singlet ground state. At high temperatures, the magnetic susceptibility of each compound follows a Curie-Weiss law, with the effective magnetic moment per Pr atom of 3.48(5)μ_B and 3.41(2)μ_B for PrCo₂Al₈ and Pr₂Co₆Al₁₉, respectively. These values are close to the theoretical value of 3.58μ_B expected for a free Pr³⁺ ion and exclude any contribution due to the Co atoms. Both compounds exhibit in the temperature range 5-300 K metallic-like electrical conductivity, and their Seebeck coefficient is of the order of several μV/K.