Kinetic Spectrophotometric Determination of Trace Aluminum by Catalytic Activity of Al<Superscript>3+</Superscript> on the Oxidation of Methylene Blue by Hydrogen Peroxide

A novel kinetic spectrophotometry for the determination of trace aluminum is described based on the catalytic activity of Al³⁺ on the redox reaction between methylene blue (MB) and hydrogen peroxide in acetate buffer (pH 3.8). The reaction is monitored spectrophotometrically by measuring the decrease in absorbance of the dye at the maximum absorption wavelength of 670nm. The variables that affected the reaction rate were fully investigated, and the optimum conditions were established. Aluminum can be determined in the range of 0–80ngmL^–1 with a detection limit of 1.0ngmL^–1. The relative standard deviation for 10 replicate determinations of 40ngmL^–1 aluminum is 0.9%. The method was used to determine aluminum in tap water and biological samples and produced satisfactory results.Received December 18, 2002; accepted May 5, 2003 published online August 22, 2003     

Application of a Carbon Nanotube Modified Electrode in Anodic Stripping Voltammetry for Determination of Trace Amounts of 6-Benzylaminopurine

Carbon nanotubes were modified on the surface of a glassy carbon electrode (GC) and initially applied in semi-derivative anode stripping voltammetry for the determination of 6-benzylaminopurine. The experiments demonstrated that the presence of the carbon nanotube greatly increased the current of the oxidation peak of benzylaminopurine. Cyclic voltammetry (CV) and semi-derivative voltammetry were used in a comparative investigation into the electrochemical oxidation of benzylaminopurine with the modified electrode. Studies on the effect of pH on the peak current and potential were carried out over the pH range of 9.013.0 with the NH₃–NH₄Cl buffer solution. A pH of 10.0 was chosen as the optimum pH. Other experimental parameters, such as film thickness, accumulation potential, temperature etc. were optimized. The anodic peak current was found to be linearly related to the concentration of benzylaminopurine over the range of 4.0×10^–8 to 1.0×10^–5mol·L^–1 with a detection limit of 5.0×10^–9mol·L^–1 in an accumulation time of 5min. Interferences of some inorganic and organic species on the response have been studied.     

Determination of Heavy Metal Ions in Chinese Herbal Medicine by Microwave Digestion and RP-HPLC with UV-Vis Detection

A new method for the simultaneous determination of heavy metal ions in Chinese herbal medicine by microwave digestion and reversed-phase high-performance liquid chromatography (RP-HPLC) has been developed. The Chinese herbal medicine samples were digested by microwave digestion. Lead, cadmium, mercury, nickel, copper, zinc, and tin ions in the digested samples were pre-column derivatized with tetra-(4-chlorophenyl)-porphyrin (T₄-CPP) to form the colored chelates which were then enriched by solid phase extraction with C₁₈ cartridge and eluted from the cartridge with tetrahydrofuran (THF). The chelates were separated on a Waters Xterra RP₁₈ column by gradient elution with methanol (containing 0.05molL^–1 pyrrolidine-acetic acid buffer salt, pH=10.0) and THF (containing 0.05molL^–1 pyrrolidine-acetic acid buffer salt, pH=10.0) as mobile phase at a flow rate of 0.5mLmin^–1 and detected with a photodiode array detector in the range of 350–600nm. In the original samples the detection limits of lead, cadmium, mercury, nickel, copper, zinc and tin are 4ngL^–1, 3ngL^–1, 6ngL^–1, 5ngL^–1, 2ngL^–1, 6ngL^–1, and 4ngL^–1, respectively. This method was applied to the determination of lead, cadmium, mercury, nickel, copper, zinc and tin in Chinese herbal medicine samples with good results.     

Synthesis,Structure, and Magnetic Properties of the Silicides <Emphasis Type="BoldItalic">RE</Emphasis>IrSi (<Emphasis Type="Italic">RE</Emphasis> = Ce,Pr, Er,Tm, Lu) and SmIr<Subscript>0.266(8)</Subscript>Si<Subscript>1.734(8)</Subscript>

Summary. The equiatomic rare earth metal–iridium–silicides REIrSi (RE=Ce, Pr, Er, Tm, Lu) were prepared by arc-melting of the elements and subsequent annealing. All silicides were characterized through their X-ray powder patterns. The structures of CeIrSi, ErIrSi, and LuIrSi were refined from X-ray single crystal diffractometer data: LaIrSi type, P2₁3, a=629.15(2)pm, wR2=0.1232, 280F² values, and 11 variable parameters for CeIrSi; TiNiSi type, Pnma, a=673.4(1), b=416.07(5), c=744.88(9)pm, wR2=0.0705, 339F² values, and 20 variable parameters for ErIrSi, and a=664.0(3), b=412.9(1), c=742.6(1)pm, wR2=0.0398, 496F² values, and 20 variable parameters for LuIrSi. The iridium and silicon atoms in CeIrSi, ErIrSi, and LuIrSi build three-dimensional [IrSi] networks where the iridium atoms have three (CeIrSi, Ir–Si 229pm) and four (ErIrSi, Ir–Si 247–258pm; LuIrSi, Ir–Si 245–256pm) silicon neighbors. The [IrSi] networks leave larger channels in which the cerium, erbium, and lutetium atoms are located. Temperature dependent susceptibility data for LuIrSi indicate Pauli paramagnetism. CeIrSi shows Curie-Weiss paramagnetism above 100K with an experimental magnetic moment of 2.56(2)_B/Ce atom. With samarium as rare earth metal component the silicide SmIr_0.266(8)Si_1.734(8) with -ThSi₂ type structure was obtained: I4₁/amd, a=409.3(1), c=1397.2(5)pm, wR2=0.0575, 161F² values, and 9 variable parameters. Within the three-dimensional [Ir_0.266Si_1.734] network the Ir/Si–Ir/Si distances range from 230 to 237pm.     

Spectral Hole-Burning in Femtosecond Laser-Irradiated Eu<Superscript>3+</Superscript>-Doped Aluminosilicate Glasses

We studied the persistent spectral hole-burning (PSHB) of the Eu³⁺-doped Al₂O₃-SiO₂ glasses, prepared by a sol–gel process, exposed to femtosecond laser pulses. The spectral holes were burned in the excitation spectra of the ⁷F₀⁵D₀ transition of Eu³⁺ ion. The depth and width of the burned holes were 15% and 2.5 cm^–1 fwhm at 7 K, respectively. The burned hole is stable up to room temperature. Fluorescence line narrowing spectra showed that Eu³⁺ ions were located in two different sites.     

Application of Lanthanide-Sensitised Chemiluminescence to the Determination of Levofloxacin, Moxifloxacin and Trovafloxacin in Tablets

A flow injection method including chemiluminescence detection has been developed and applied to the determination of fluoroquinolones levofloxacin, moxifloxacin and trovafloxacin in tablets. The proposed method is based on the luminescent properties of the system Ce(IV)–sulphite–fluoroquinolone and the addition of a trivalent lanthanide ion as emission-sensitizer. The optimum conditions for chemiluminescence emission were investigated for each fluoroquinolone. The best results were achieved when employing Eu(III) as lanthanide cation for levofloxacin and moxifloxacin, and Tb(III) for trovafloxacin. These fluoroquinolones were determined over the concentration range of 0.5–3.5µgmL^–1, 0.2–3.0µgmL^–1 and 0.008–0.400µgmL^–1, with detection limits of 0.100, 0.035 and 0.008µgmL^–1, respectively. The relative standard deviations were in the range of 1.0–2.5% for all three cases. The method was applied to the determination of three fluoroquinolones in their respective pharmaceutical preparations and compared with an independent UV-spectrophotometric method. The results were satisfactory.     

Silica Gel Loaded with <Emphasis Type="Italic">o</Emphasis>-Dihydroxybenzene: Design,Metal Sorption Equilibrium Studies and Application to Metal Enrichment Prior to Determination by Flame Atomic Absorption Spectrometry

The aminopropyl silica gel (APSG) prepared by reaction of activated silica gel with 3-aminopropyltriethoxysilane on reaction with 3,4-dihydroxybenzaldehyde has resulted in a new chelating matrix, o-dihydroxybenzene (DHB) anchored silica gel, which is characterized by IR, TGA and elemental analyses. APSG is characterized with ¹³C CPMAS NMR spectroscopy. DHB anchored silica gel sorbs quantitatively (97.4–99.2% recovery) Cu(II), Pb(II), Fe(III), Zn(II), Co(II), Ni(II) and Cd(II) at pH 6.0–7.5, 5.0–7.0, 5.5–7.0, 6.0–8.0, 6.5–8.0, 5.5–7.0 and 6.5–7.5, respectively. The sorption capacity varies from 32 to 348µmolg^–1 and is highest for copper. Desorption was found to be quantitative with 1.0–3.0molL^–1 HCl/HNO₃ (for Pb). The optimum flow rate of the solution for quantitative sorption of metal ions on a column (10cm×10mm) packed with 1g of the modified silica gel is 1.0–4.0mLmin^–1, whereas for desorption it is 2.0 –4.0mLmin^–1. The tolerance limits for NaCl, NaBr, NaI, NaNO₃, Na₂SO₄, Na₃PO₄, humic acid, EDTA, ascorbic acid, citric acid, sodium tartrate, Ca(II) and Mg(II) in the sorption of all the seven metal ions are reported. The preconcentration factors are between 100 and 300 and t_1/2 values 17min. The present matrix coupled with FAAS has been used to enrich and determine the seven metal ions in river and tap water samples (RSD 1.4–7.0%) and in synthetic certified water samples SLRS-4 (NRC, Canada) with an RSD of 2.73–2.83%. The cobalt present in pharmaceutical vitamin tablets and Zn in milk powder was preconcentrated on DHB anchored silica gel and determined by FAAS (RSD of 2.00 to 2.72%).     

Adsorptive Catalytic Voltammetry of Physcion in the Presence of Dissolved Oxygen at a Carbon Paste Electrode

A novel electroanalytical method for the determination of physcion is described for the first time. Physcion yields an adsorption catalytic voltammetric peak at –0.74V (vs. SCE) in 0.4molL^–1 NH₄Cl–NH₃·H₂O buffer solution (pH 10.5) at a carbon paste electrode (CPE). The experimental results indicated that physcion is efficiently accumulated at a CPE by adsorption. In the subsequent potential scan, physcion was reduced to a homologous anthrahydroquinone compound. The compound was then immediately oxidized to physcion by the dissolved oxygen in the solution, and then physcion was again reduced at the CPE. As a result, a cyclic catalytic reaction was established. The second-order derivative peak current is proportional to the physcion concentration in the ranges of 2.0×10^–104.0×10^–9molL^–1 (accumulation 90s) and 4.0×10^–92.0×10^–8molL^–1 (accumulation 60s). The limit of detection is 8×10^–11molL^–1 (S/N=3) for a 120s accumulation time. The method was applied to the direct determination of physcion in the medicinal plant polygonum multiflorum Thumb with satisfactory results.     

Determination of Arsenic in Food Samples by Hydride Generation – Atomic Absorption Spectrometry

A method for the determination of trace amounts of arsenic in food samples using flow injection analysis and atomic absorption spectrometry with hydride generation (FI-HG AAS) was developed. The parameters of the flow injection system and the hydride generation were optimized with respect to reagent concentrations, atomization temperature, injection volume, reaction coil length and carrier flow rate. The limits of detection and quantification were 0.34µgL^–1 and 1.2µgL^–:1, respectively, and the analytical curve is linear up to 30.0µgL^–1 arsenic. The relative standard deviation for 12 replicates varies between 5% for 4.0µgL^–1 As and 1.8% for 30.0µgL^–1 As, with an injection frequency of up to 135h^–1. Interferences from Ni(II), Cu(II), Fe(III), Cr(III), Mo(II), Bi(III), Se(IV), Se(VI), Sb(III) and Sb(V) could be masked with a mixture of ascorbic acid-KI in a 5.0molL^–1 HCl solution. The accuracy of the proposed method was evaluated by using certified reference materials of biological samples, and the method was used to determine the content of arsenic in fish and coffee beans.     

Fluorescence Quenching Studies of Curcumin by Hydrogen Peroxide in Acetonitrile Solution

Summary. Steady state quenching studies of curcumin, 1,7-bis(4-hydroxy-3-methoxyphenyl)-1,6-heptadiene-3,5-dione, fluorescence by hydrogen peroxide were conducted in acetonitrile solution. A quenching rate constant, k_q, of 1.05×10¹⁰M^–1·s^–1 was obtained with a short fluorescence lifetime of 347ps. The reaction rate constant, which is within the diffusion-limited regime, is activation-controlled. The rate constant of deactivation of the thermally excited curcumin was 1.2 orders of magnitude more nonradiative (2.67×10⁹s^–1) than radiative (2.16×10⁸s^–1). The reaction was exothermic with a G° of –1.97eV and solvent reorganization energy of 1.37eV. These values indicate that the electron transfer reaction is solvent-mediated with electron transfer rate constant, k_ET, of 2.16×10¹⁰s^–1.     

Energy Transfer Electrogenerated Chemiluminescence for the Determination of Sulfite

A simple and novel electrogenerated chemiluminescence (ECL) method for the determination of sulfite has been developed based on the energy transfer ECL process. It was found that a weak ECL signal of sulfite was electrochemically generated on a platinum electrode in neutral aqueous solution. The signal was strongly enhanced by rhodamine B as an energy receptor and further enhanced by the neutral surfactant Tween 80. In 0.10M phosphate buffer solution (pH=7.5) containing 2.0×10^–6gmL^–1 rhodamine B and 0.4% (v/v) Tween 80, the ECL response to the concentration of sulfite at a potential of 0.82V was linear over a range of 1.0×10^–7gmL^–1 to 8.0×10^–6gmL^–1, and the detection limit was 5×10^–8gmL^–1. The relative standard deviation (n=11, 1.0×10^–6gmL^–1) was 3.8%. The proposed method has been successfully applied to the determination of sulfite in pharmaceutical injections and white sugar samples.     

Determination of Attogram Quantities of Silver via Quenching of the Solid Substrate Room-Temperature Phosphorescence of Rhodamine B Based on the Catalysis of its Oxidation by Potassium Persulfate

A new method of SS-RTP for the determination of trace silver has been established. This method is based on the fact that Ag⁺, when activated by ,-bipyridyl (bipy) in a media of HAc–NaAc (pH=4.9), can catalyze the reaction of Rhodamine B (RhoB) oxidized by K₂S₂O₈, thus causing the Solid Substrate Room-Temperature Phosphorescence (SS-RTP) of RhoB to be quenched. The activating efficiency of bipy is 6.7 times higher than that of o-phenanthroline (phen). The reduction of the phosphorescence intensity (I_p) of RhoB is directly proportional to the concentration of Ag⁺ ions in the range of 1.6016.0agspot^–1 (0.40µLspot^–1). The regression equation of the working curve can be expressed as I_p=18.78+5.100m_Ag+ (agspot^–1) (r=0.9994, n=6), the detection limit is 0.28agspot^–1. This rapid, accurate and sensitive method has been successfully applied to the determination of trace silver in tea and human hair samples, and the results agree well with the Atomic Absorption Spectroscopy (AAS) method. The mechanism of the catalyzing reaction is also discussed.     

Indirect FIA Amperometric Determination of Sulphite Based on the Autocatalytic Generation of Cu3+ Complexes

Sulphite was determined in alcoholic (wine) and non-alcoholic (fruit juice) samples using an indirect amperometric FIA method. The current measured at 0V was proportional to the amount of the Cu³⁺ species chemically generated by the sulphite-induced autoxidation of the Cu³⁺ /tetraglycine complex in the presence of traces of Ni²⁺. The proposed flow method incorporates gas-diffusion separation of sulphite (in the form of SO₂) through a PTFE membrane, thereby restraining interference caused by the matrices. The dynamic concentration range was 20–100µM with a detection limit of 2µM (S/N=3). The repeatability of current responses for 100µM sulphite was evaluated to be 4.9% (n=20), and the analytical frequency was 40h^–1. Results for various samples were compared with those obtained when using a recommended procedure (correlation coefficient=0.998, n=5), and recovery ranged between 92 and 98%.     

Micro-Determination of Protein Containing SH– and –S–S– Groups Based on the Polarographic wave of an Electroactive Derivative

This paper presents a new simple and sensitive method for the micro-determination of protein containing SH– and –S–S– groups based on the single sweep polarographic wave of an electroactive derivative. In 0.04molL^–1 Na₃PO₄ and 0.2% ascorbic acid solution, protein is heated in a boiling water bath for 15min, the reaction product giving a sensitive reduction wave at –0.70V (vs. SCE). The wave height is linearly proportional to the concentration of protein. The calibration curves of bovine serum albumin (BSA), human serum albumin (HSA), ovalbumin (OVA) and lysozyme (Lyso) are constructed under the optimal conditions. For BSA and HSA, the linear ranges and detection limits are 0.05–24mgL^–1 and 0.02mgL^–1, respectively. The method has been applied to the determination of protein in human serum samples with satisfactory results. The mechanism of the polarographic wave was also studied, and the results show that S^2– ion is released from the protein molecule during the derivatization reaction, the wave being attributed to the reduction of HgS.     

Selective Kinetic Determination of Cu2+ with Tetraazamacrocyclic Bis(Methylphosphonate) Ligand (Dipon)

A new macrocyclic ligand, 1,4,8,11-tetraazacyclotetradecane-1,8-bis(methylphosphonic acid) (refered to as dipon) exhibits high thermodynamic and kinetic selectivity for Cu²⁺ compared to other transition metal ions. The initial-rate method (=310nm, pH=3.75, c_L4.6×10^–3molL^–1) was chosen as an optimal experimental approach in order to achieve maximum sensitivity of determination. The dynamic range of the method is (5–200)×10^–6molL^–1, and the detection limit is 2.5×10^–6molL^–1. A standard addition procedure was applied to the kinetic determination of Cu²⁺ to eliminate the effect of interfering ions (e.g. Zn²⁺, Ca²⁺, Mg²⁺, Cd²⁺, Pb²⁺, Mn²⁺, Co²⁺, Ni²⁺, HCO^–₃, Cl^–, SO₄^2–, etc.). The method was tested on artificial and real samples (alloys, pure and spiked mineral water) and gave satisfactory results which are in agreement with the values for some certified materials. The advantage of the proposed method is rapidity, simplicity and robustness in the presence of other metal ions.     

A Simple Sensitive Spectrophotometric Method for the Determination of Ce4+ Using Variamine Blue as a Chromogenic Reagent

A rapid and sensitive spectrophotometric method is described for the determination of trace amounts of cerium using Variamine Blue (VB) as a chromogenic reagent. The proposed method is based on the reaction of cerium with potassium iodide in acidic medium to liberate iodine, which oxidizes Variamine Blue to give a violet colored species with an absorption maximum at 560nm. Beers law was obeyed in the range 2–10µg mL^–1 of cerium. The molar absorptivity and Sandells sensitivity are found to be 1.65×10⁴L mol^–1cm^–1 and 8.48×10^–3µgcm^–2, respectively. The proposed method has been successfully applied to the determination of cerium in alloy and synthetic mixtures.     

A Highly Sensitive and Selective Assay for Cysteine Using the Chemiluminescence Reaction of Luminol and Hydrogen Peroxide

A very simple, highly sensitive and selective chemiluminescence (CL) method was established for the determination of cysteine. This method is based on the fact that the CL reaction of luminol and hydrogen peroxide can be greatly enhanced by cysteine. The CL intensities at maximum light emission were linearly correlated with the concentration of cysteine over the range of 2.0×10^–8–6.0×10^–6molL^–1 with a detection limit of 7.5×10^–9molL^–1. The relative standard deviation was 1.7% for the determination of 1.0×10^–7molL^–1 cysteine (n=9). The feasibility of utilizing the proposed method for the determination of total concentration of cysteine in human serum was examined.     

Electrochemical Behavior of Epinephrine at a Penicillamine Self-Assembled Gold Electrode,and its Analytical Application

The fabrication and electrochemical characteristics of a penicillamine (PCA) self-assembled monolayer modified gold electrode were investigated. The self-assembled electrode shows obvious electrocatalytic activity for the oxidation of epinephrine (EP). In phosphate buffer (pH 7.73), a sensitive oxidation peak was observed at 0.190V with the PCA modified Au electrode. The peak current is proportional to the concentration of EP in the range of 2.0×10^–56.0×10^–4molL^–1 and 5.0×10^–6 2.0×10^–4molL^–1 for cyclic voltammetry (CV) and differential pulse voltammetry (DPV) with the detection limits of 1.8×10^–7 and 1.3×10^–7molL^–1, respectively. The possible reaction mechanism is also discussed. The PCA self-assembled monolayer modified gold electrode is highly stable and can be applied to the determination of EP in practical injection samples. Application is simple, rapid and produces accurate results.     

Non-Aqueous Capillary Electrophoresis with Indirect Photometric Detection for Direct Analysis of Pb2+, Zn2+ and Cd2+ Ions

A new approach, based on non-aqueous capillary electrophoresis separation and indirect photometric detection, was established for the determination of the transition metal ions Pb²⁺, Zn²⁺ and Cd²⁺. Under optimized conditions, the method produced baseline separation of these three metal ions. The linear range and detection limits were 1050µM, 1.9µM for Cd²⁺; 1050µM, 2.1µM for Zn²⁺; and 20100µM, 3.8µM for Pb²⁺, respectively.     

Voltammetric Behavior of Dopamine at ct-DNA Modified Carbon Fiber Microelectrode

A sub-micrometer thin-layer DNA modified carbon fiber microcylinder electrode was prepared by electrodeposition of ct-DNA at 1.5V (vs. Ag/AgCl). The voltammetric behavior of dopamine (3-hydroxytyramine) was investigated at the modified electrode. It was found that the modified electrode exhibits a highly electrocatalytic activity toward dopamine oxidation. Differential pulse voltammetry was used for determination of dopamine in pH 7.4 phosphate buffer solution. A linear response of the peak current versus the concentration was found in the range of 4×10^–6 to 10^–4molL^–1 at 10^–4molL^–1 AA (ascorbic acid) coexistence (R=0.9959) and the range of 6×10^–5 to 10^–3molL^–1 at 10^–3molL^–1 AA (R=0.9960). The presence of a high concentration of ascorbic acid did not interfere with the determination. The proposed method exhibited good recovery and reproducibility. This method can be applied to the detection of DA in real samples.