New Hg2+-selective chromo- and fluoroionophore based upon 8-hydroxyquinoline

A new 8-hydroxyquinoline derivative having an appended boron-dipyrromethene function has been prepared, and its metal ion sensing properties were investigated. The designed compound exhibited pronounced Hg(2+)-selective on-off-type fluoroionophoric properties among the representative transition- and heavy-metal ions in aqueous dioxane solution. The fluorescence was efficiently quenched more than 98% with 5 equiv of Hg(2+) ions, and the detection limit was found to be 5 x 10(-)(6) M in a dioxane-water (1:3, v/v) solvent system. The ionophore also showed a selective chromogenic behavior toward Hg(2+) ions by changing the color of the solution from light amber to red, which can be detected with the naked eye.     

Recognition of Hg2+ and Cr3+ in physiological conditions by a rhodamine derivative and its application as a reagent for cell-imaging studies

A new rhodamine-based receptor, derivatized with an additional fluorophore (quinoline), was synthesized for selective recognition of Hg(2+) and Cr(3+) in an acetonitrile/HEPES buffer medium of pH 7.3. This reagent could be used as a dual probe and allowed detection of these two ions by monitoring changes in absorption and the fluorescence spectral pattern. In both instances, the extent of the changes was significant enough to allow visual detection. More importantly, the receptor molecule could be used as an imaging reagent for detection of Hg(2+) and Cr(3+) uptake in live human cancer cells (MCF7) using laser confocal microscopic studies. Unlike Hg(ClO(4))(2) or Hg(NO(3))(2) salts, HgCl(2) or HgI(2) failed to induce any visually detectable change in color or fluorescence upon interaction with L(1) under identical experimental conditions. Presumably, the higher covalent nature of Hg(II) in HgCl(2) or HgI(2) accounts for its lower acidity and its inability to open up the spirolactam ring of the reagent L(1). The issue has been addressed on the basis of the single-crystal X-ray structures of L(1)·HgX(2) (X(-) = Cl(-) or I(-)) and results from other spectral studies.     

Novel hemicyanine dye as colorimetric and fluorometric dual-modal chemosensor for mercury in water

A novel water soluble Hg(2+)-selective chemosensor 1 with hemicyanine as fluorescent reporting group and NO(2)Se(2) chelating unit as ion binding site was reported. Chemosensor 1 shows a specific Hg(2+) selectivity and discrimination between Hg(2+) and chemically similar ions in conjunction with a visible colorimetric change from red to colorless, potentially leading to both "naked-eye" and fluorometric detection of Hg(2+) cations.     

Reversible "off-on" fluorescent chemosensor for Hg2+ based on rhodamine derivative

A novel and simple fluorescent chemosensor based on rhodamine was designed and synthesized to detect Hg(2+) with high selectivity. The structure of chemosensor 1 was characterized by IR, (1)H NMR, and HRMS spectroscopies. Chemosensor 1 exhibited distinct fluorescent and colorimetric changes toward Hg(2+) in an ethanol/water (80/20, v/v) solution, which resulted in the formation of 1/Hg(2+) complex with the Hg(2+)-induced ring opening of the spirolactam ring in rhodamine. The reversibility of chemosensor 1 was verified through its spectral response toward Hg(2+) ions and TBAI (tetrabutylammonium iodide) titration experiments.     

Azine-based receptor for recognition of Hg2+ ion: crystallographic evidence and imaging application in live cells

A newly synthesized azine-based receptor (L) is found to show remarkable specificity toward the Hg(2+) ion in aqueous media over other metal ions. Coordination of L to Hg(2+) induces a detectable change in color and a turn-on fluorescence response. Restricted C=N isomerization of the azine moieties in the excited state as well as the Photoinduced Electron Transfer (PET) involving the lone pair of electrons of N(1)/N(2) on coordination of L to the Hg(2+) ion account for the turn-on fluorescence response. This reagent could be used for imaging the accumulation of Hg(2+) ions in Epithelial cell line KB 31 cells.     

Ratiometric detection of Cr3+ and Hg2+ by a naphthalimide-rhodamine based fluorescent probe

Newly synthesized rhodamine derivatives, L(1) and L(2), are found to bind specifically to Hg(2+) or Cr(3+) in presence of large excess of other competing ions with associated changes in their optical and fluorescence spectral behavior. These spectral changes are significant enough in the visible region of the spectrum and thus, allow the visual detection. For L(1), the detection limit is even lower than the permissible [Cr(3+)] or [Hg(2+)] in drinking water as per standard U.S. EPA norms; while the receptor, L2 could be used as a ratiometric sensor for detection of Cr(3+) and Hg(2+) based on the resonance energy transfer (RET) process involving the donor naphthalimide and the acceptor Cr(3+)/Hg(2+)-bound xanthene fragment. Studies reveal that these two reagents could be used for recognition and sensing of Hg(2+)/Cr(3+). Further, confocal laser microscopic studies confirmed that the reagent L(2) could also be used as an imaging probe for detection of uptake of these ions in A431 cells.     

Fluorescent and colorimetric probes for mercury(II): tunable structures of electron donor and π-conjugated bridge

A new series of intramolecular-charge-transfer (ICT) molecules (compounds 1, 2, and 3) were synthesized by attaching various electron-donating thiophenes groups to a triphenylamine backbone with an aldehyde group as the electron acceptor. Based on the protection reaction between ethanethiol and aldehyde, the corresponding dithioacetals (compounds S1, S2, and S3) were prepared to serve as novel colorimetric and fluorescent chemosensors for Hg(2+) ions. Also, compound S1 was further utilized to construct the chemical-reaction-based conjugated polymer probe (PS1) towards Hg(2+) ions. In the presence of as little as 10 nM Hg(2+), compound PS1 displayed an apparent change in the fluorescent intensity. The sensing processes were revealed to be mediated by ICT, as confirmed by time-dependent DFT calculations. Furthermore, compound S1 was successfully applied to microscopic imaging for the detection of Hg(2+) in HeLa cells with ratiometric fluorescent methods.     

Colorimetric assay for mercury (II) based on mercury-specific deoxyribonucleic acid-functionalized gold nanoparticles

A colorimetric nanoprobe-mercury-specific DNA-functionalized gold nanoparticles (Au-MSD) was developed for sensing Hg(2+). The new mercury-sensing concept relies on measuring changes in the inhibition of "non-crosslinking" aggregation of Au-MSD-induced by the folding of mercury-specific DNA strand through the thymine-Hg(2+)-thymine (T-Hg(2+)-T) coordination. In the absence of Hg(2+), a high concentration of MgCl(2) (50 mM) results in a rapid aggregation of Au-MSD because of the removal of charge repulsion. When Hg(2+) is present, the particles remain stable due to the folding of MSD functionalized on the particle surface. The assay enables the colorimetric detection of Hg(2+) in the concentration range of 0.1-10 μM Hg(2+) ions with a detection limit of 60 nM, and allows for the selective discrimination of Hg(2+) ions from the other competitive metal ions. Toward the goal for practical applications, the sensor was further evaluated by monitoring Hg(2+) in fish tissue samples.     

Visual and on-site detection of mercury(II) ions on lateral flow strips using DNA-functionalized gold nanoparticles

A test strip for detection of Hg(2+) in aqueous solution based on the DNA-functionalized gold nanoparticles (DNA-AuNPs) was developed and evaluated. When Hg(2+) ions were introduced, the biotinylated DNA(2) hybridized with thiolated DNA(1) functionalized on the AuNPs (DNA(1)-AuNPs) to form mismatch complexes through thymine-Hg(2+)-thymine (T-Hg(2+)-T) coordination. The formed mismatch complexes and excess DNA(1)-AuNPs could be captured on the test line formed by streptavidin and the control line formed by DNA(3)-BSA, respectively. Two red lines appeared due to the accumulation of AuNPs, enabling visual detection of Hg(2+) with a detection limit of about 6 nM. The assay results can be obtained within 5 min. The results show that the test strip has excellent sensitivity and selectivity for detection of Hg(2+); thus it holds a great potential for rapid, on-site and real time detection of Hg(2+).     

A simple and sensitive fluorescent sensing platform for Hg²+ ions assay based on G-quenching

In this work, a novel fluorescence biosensor was demonstrated for detection of Hg(2+) ions with relatively high selectivity and sensitivity. The sensing scheme was based on G-quenching induced by Hg(2+) ions. In the presence of Hg(2+) ions, the single-stranded signal probe which has carboxylfluorescein (FAM) and guanine segment at its 5' and 3' ends, respectively, folded into duplex-like structure via the Hg(2+)-mediated coordination of T-Hg(2+)-T base pairs. It brought guannine segment close to the dye and caused a remarkable decrease of fluorescence signal. The sensor showed a sensitive response to Hg(2+) ions in a concentration range from 0.5 to 10 μM, and a detection limit of 0.5 nM was given. This homogeneous system required only a single-labeled oligonucleotide, operated by concise procedures, and possessed comparable sensitivity as previous approaches. Furthermore, the sensor exhibits a great perspective for future practical applications.     

A squaraine-based colorimetric and "turn on" fluorescent sensor for selective detection of Hg2+ in an aqueous medium

A novel squaraine-based chemosensor SQ-1 has been synthesized, and its sensing behavior toward various metal ions was investigated by UV-vis and fluorescence spectroscopies. In AcOH-H(2)O (40:60, v/v) solution, Hg(2+) ions coordinate with SQ-1 causing a deaggregation which induces a visual color and absorption spectral changes as well as strong fluorescence. In contrast, the addition of other metals (e.g., Pb(2+), Cd(2+), Cu(2+), Zn(2+), Al(3+), Ni(2+), Co(2+), Fe(3+), Ca(2+), K(+), Mg(2+), Na(+), and Ag(+)) does not induce these changes at all. Thus SQ-1 is a specific Hg(2+) sensing agent due to the inducing deaggregation of the dye molecule by Hg(2+).     

Multiplexed analysis of silver(I) and mercury(II) ions using oligonucletide-metal nanoparticle conjugates

A colorimetric assay has been developed for the simultaneous selective detection of silver(I) and mercury(II) ions utilizing metal nanoparticles (NPs) as sensing element based on their unique surface plasmon resonance properties. In this method, sulfhydryl group modified cytosine-(C)-rich ssDNA (SH-C-ssDNA) was self-assembled on gold nanoparticles (AuNPs) to produce the AuNPs-C-ssDNA complex, and sulfhydryl group modified thymine-(T)-rich ssDNA (SH-T-ssDNA) was self-assembled on silver nanoparticles (AgNPs) to produce the AgNPs-T-ssDNA complex. Oligonucleotides (SH-C-ssDNA or SH-T-ssDNA) could enhance the AuNPs or AgNPs against salt-induced aggregation. However, the presence of silver(I) ions (Ag(+)) in the complex of ssDNA-AuNPs would reduce the stability of AuNPs due to the formation of Ag(+) mediated C-Ag(+)-C base pairs accompanied with the AuNPs color change from red to purple or even to dark blue. Moreover, the presence of mercury(II) ions (Hg(2+)) would also reduce the stability of AgNPs due to the formation of Hg(2+) mediated T-Hg(2+)-T base pairs accompanied with the AgNPs color change from yellow to brown, then to dark purple. The presence of both Ag(+) and Hg(2+) will reduce the stability of both AuNPs and AgNPs and cause the visible color change. As a result, Ag(+) and Hg(2+) could be detected qualitatively and quantitatively by the naked eye or by UV-vis spectral measurement. The lowest detectable concentration of a 5 nM mixture of Ag(+) and Hg(2+) in the river water was gotten by the UV-vis spectral measurement.     

A highly selective sulfur-free iridium(III)-complex-based phosphorescent chemidosimeter for detection of mercury(II) ions

A neutral phosphorescent coordination compound bearing a benzimidazole ligand, Ir(pbi)(2)(acac) (Hpbi = 1,2-diphenyl-1H-benzo[d]imidazole; Hacac = acetylacetone), is demonstrated to be the first example of a sulfur-free iridium complex for the detection of Hg(2+) cations with high selectivity and sensitivity. Ir(pbi)(2)(acac) shows a multisignaling response towards mercury(II) ions through UV-vis absorption, phosphorescence and electrochemistry measurements. Upon addition of Hg(2+) ions, solutions of this complex change from yellow to colorless, which could be observed easily by the naked eye, while its phosphorescence turns from bright green (λ(PLmax) = 520 nm) into faint skyblue (λ(PLmax) = 476 nm), and the detection limit is calculated to be 2.4 × 10(-7) mol L(-1). (1)H NMR spectroscopic titration as well as ESI-MS results indicate that the decomposition of Ir(pbi)(2)(acac) in the presence of Hg(2+) through rupture of Ir-O bonds is responsible for the significant variations in both optical and electrochemical signals.     

A BODIPY-based colorimetric and fluorometric chemosensor for Hg(II) ions and its application to living cell imaging

A new monostyryl boron dipyrromethene derivative (MS1) appended with two triazole units indicates the presence of Hg(2+) among other metal ions with high selectivity by color change and red emission. Upon Hg(2+) binding, the absorption band of MS1 is blue-shifted by 29 nm due to the inhibition of the intramolecular charge transfer from the nitrogen to the BODIPY, resulting in a color change from blue to purple. Significant fluorescence enhancement is observed with MS1 in the presence of Hg(2+); the metal ions Ag(+), Ca(2+), Cd(2+), Co(2+), Cu(2+), Fe(2+), Fe(3+), K(+), Mg(2+), Mn(2+), Ni(2+), Pb(2+), and Zn(2+) cause only minor changes in the fluorescence of the system. The apparent association constant (K(a)) of Hg(2+) binding in MS1 is found to be 1.864 × 10(5) M(-1). In addition, fluorescence microscopy experiments show that MS1 can be used as a fluorescent probe for detecting Hg(2+) in living cells.     

A one-step colorimetric method of analysis detection of Hg2+ based on an in situ formation of Au@HgS core-shell structures

A new approach for the detection of Hg(2+) is reported based on color changes from which gold nanoparticles (Au NPs) are surrounded by a layer of HgS quantum dots to form in situ Au@HgS core-shell nanostructures. The surface plasmon resonance (SPR) absorption of the gold core was changed due to a shell layer of HgS formed on the surface of the Au NPs, which brings the colour change of the aqueous solution. Therefore, Hg(2+) can be recognized by visualizing the colour change of the Au@HgS core-shell nanostructures, and can be detected quantitatively by measurement of the UV-vis spectra. Some effects on the detection of Hg(2+) were investigated in detail. This method was used to detect Hg(2+) with excellent selectivity and high sensitivity. In our method, the lowest detected concentrations for mercury ions were 5.0 × 10(-6) M observed by the naked eye and 0.486 nM as measured by UV-vis spectra. At the range from 8.0 × 10(-5) to 1.0 × 10(-8) M of Hg(2+), this method was shown to have a good linear relationship.     

Electrochemical behavior and voltammetric determination of paracetamol on Nafion/TiO2-graphene modified glassy carbon electrode

A simple and sensitive method was developed for the detection of mercury ions with quartz crystal microbalance (QCM), based on the specific thymine-Hg(2+)-thymine (T-Hg(2+)-T) interaction and gold nanoparticle-mediated signal amplification. To enhance the sensitivity of detection a sandwich hybridization approach was adopted in this work. The QCM gold surface was modified with the probe SH-oligonucleotides (Oligo-1) and 6-Mercapto-1-hexanol to form an active surface for the hybridization of a longer ss-DNA (Oligo-2), and then Oligo-3 hybridazated with an excess and matching part of Oligo-2. In all oligonucleotides, there existed T bases. In the presence of Hg(2+) ions, special T-Hg(2+)-T reaction greatly enhanced the hybridization of oligonucleotides and detection sensitivity. The gold nanoparticle (Au NPs) amplifier method further increased the sensitivity of detection. A detection sensitivity of 5nM Hg(2+) was obtained in the QCM system, whereas other coexisting metal ions (such as Ni(2+), Mg(2+), Co(2+), Cr(3+), Pb(2+), Cd(2+), Mn(2+), Ba(2+)) had no significant interference. This method reveals a new approach for the manufacture of a kind of simple and low cost sensors for the Hg(2+) detection.     

A simple and label-free sensor for mercury(II) detection in aqueous solution by malachite green based on a resonance scattering spectral assay

Mercury ions (Hg(2+)) can specifically interact with the thymine-rich Hg(2+) aptamer and malachite green (MG) to form the Hg(2+) aptamer-MG-Hg(2+) complex, inducing the increase of resonance scattering (RS) intensity at 611 nm, which enables the label-free detection of Hg(2+) in aqueous solution with high selectivity and a detection limit of 1.7 nM.     

Control over surface DNA density on gold nanoparticles allows selective and sensitive detection of mercury(II)

We have developed a new highly selective and sensitive technique for the detection of Hg(2+) using DNA-functionalized gold nanoparticles (Au NPs) and OliGreen. This system is the first that allows the detection of Hg(2+) based on the release of DNA molecules, induced by conformational changes on Au NP surfaces, and its sensitivity is highly dependent upon surface DNA density. When Hg(2+) ions interact with the thymidine units of the DNA molecules bound to the Au NPs through Au-S bonds, the conformations of these DNA derivatives change from linear to hairpin structures, causing the release of some of the DNA molecules from the surface of the Au NPs into the bulk solution to react with OliGreen. The fluorescence of OliGreen-DNA complexes increased with increasing concentration of Hg(2+), and Hg(2+) could be detected at concentrations as low as 25 nM. A linear correlation existed between the fluorescence intensity and the concentration of Hg(2+) over the range 0.05-2.5 microM (R(2) = 0.98). This simple and cost-effective probe was applied to determine the spiked Hg(2+) in the pond samples; the recoveries (96-102%) suggested low matrix interference and high sensitivity.     

Rhodamine-based highly sensitive colorimetric off-on fluorescent chemosensor for Hg2+ in aqueous solution and for live cell imaging

A novel rhodamine-based highly sensitive and selective colorimetric off-on fluorescent chemosensor for Hg(2+) ions is designed and prepared by using the well-known thiospirolactam rhodamine chromophore and furfural hydrazone as signal-reporting groups. The photophysical characterization and Hg(2+)-binding properties of sensor RS1 in neutral N, N-dimethylformamide (DMF) aqueous solution are also investigated. The signal change of the chemosensor is based on a specific metal ion induced reversible ring-opening mechanism of the rhodamine spirolactam. The response of the chemosensor for Hg(2+) ions is instantaneous and reversible. And it successfully exhibits a remarkably "turn on" response toward Hg(2+) over other metal ions (even those that exist in high concentration). Moreover, this sensor is applied for in vivo imaging in Rat Schwann cells to confirm that RS1 can be used as a fluorescent probe for monitoring Hg(2+) in living cells with satisfying results, which further demonstrates its value of practical applications in environmental and biological systems.     

Oligonucleotide-functionalized gold nanoparticles-enhanced QCM-D sensor for mercury(II) ions with high sensitivity and tunable dynamic range

A quartz crystal microbalance with dissipation monitoring (QCM-D) sensor was developed for highly sensitive and specific detection of mercury(II) ions (Hg(2+)) with a tunable dynamic range, using oligonucleotide-functionalized gold nanoparticles (GNPs) for both frequency and dissipation amplification. The fabrication of the sensor employed a 'sandwich-type' strategy, and formation of T-Hg(2+)-T structures in linker DNA reduced the hybridization of the GNPs-tagged DNA on the gold electrode, which could be used as the molecular switch for Hg(2+) sensing. This QCM-D mercury sensor showed a linear response of 10-200 nM, with detection limits of 4 nM and 7 nM for frequency and dissipation measurements, respectively. Moreover, the dynamic range of the sensor could be tuned by simply altering the concentration of linker DNA without designing new sensors in the cases where detection of Hg(2+) at different levels is required. This sensor afforded excellent selectivity toward Hg(2+) compared with other potential coexisting metal ions. The feasibility of the sensor was demonstrated by analyzing Hg(2+)-spiked tap- and lake-water samples with satisfactory recoveries. The proposed approach extended the application of the QCM-D system in metal ions sensing, and could be adopted for the detection of other analytes when complemented with the use of functional DNA structures.