Electron and nuclear spin dynamics in the thermal mixing model of dynamic nuclear polarization

A novel mathematical treatment is proposed for computing the time evolution of dynamic nuclear polarization processes in the low temperature thermal mixing regime. Without assuming any a priori analytical form for the electron polarization, our approach provides a quantitative picture of the steady state that agrees with the well known Borghini prediction based on thermodynamic arguments, as long as the electrons-nuclei transition rates are fast compared to the other relevant time scales. Substantially different final polarization levels are achieved instead when the latter assumption is relaxed in the presence of a nuclear leakage term, even though very weak, suggesting a possible explanation for the deviation between the measured steady state polarizations and the Borghini prediction. The proposed methodology also allows us to calculate nuclear polarization and relaxation times, once the electrons/nuclei concentration ratio and the typical rates of the microscopic processes involving the two spin species are specified. Numerical results are shown to account for the manifold dynamic behaviours of typical DNP samples.     

Computer generation of nuclear spin species and nuclear spin statistical weights

This article develops computer programs for computer generation of nuclear spin species and nuclear spin statistical weights of rovibronic levels. The programs developed here generate nuclear spin species and statistical weights from the group structures known as generalized character cycle indices (GCCI s) which are computed easily from the character table of the PI group of the molecule under consideration. Procedures are illustrated with examples.     

An algorithm for the generation of nuclear spin species and nuclear spin statistical weights

This article develops a set of algorithms for the computer generation of nuclear spin species and nuclear spin statistical weights potentially useful in molecular spectroscopy. These algorithms generate the nuclear spin species from group structures known as generalized character cycle indices (GCCI s). Thus the required input for these algorithms is just the set of all GCCI s for the symmetry group of the molecule which can be computed easily from the character table. The algorithms are executed and illustrated with examples.     

1.5T核磁共振弛豫时间分析仪的研制及其潜在应用

介绍了国产1.5T核磁共振弛豫时间分析仪的基本组成、性能指标,研发过程中攻克的技术难题。该仪器主要由磁体部分、电子部分、软件部分组成,具有体积小、信噪比高、检测无损、使用和维护简便和造价低廉等优点。同时对该系统磁体频率和磁信号的稳定性进行了相关的测试,结果表明该系统稳定可靠。该仪器的磁场强度增加到1.5T,在同等外界条件和环境下,信噪比增加约为0.5T系统的10倍,检测灵敏度大幅度提高;该仪器为食品品质鉴定、食品安全检测、医学诊断、生物标志物的大规模筛选等生化分析提供一个全新的途径。     

Uniform mixing in paper-based microfluidic systems using surface acoustic waves

Paper-based microfluidics has recently received considerable interest due to their ease and low cost, making them extremely attractive as point-of-care diagnostic devices. The incorporation of basic fluid actuation and manipulation schemes on paper substrates, however, afford the possibility to extend the functionality of this simple technology to a much wider range of typical lab-on-a-chip operations, given its considerable advantages in terms of cost, size and integrability over conventional microfluidic substrates. We present a convective actuation mechanism in a simple paper-based microfluidic device using surface acoustic waves to drive mixing. Employing a Y-channel structure patterned onto paper, the mixing induced by the 30 MHz acoustic waves is shown to be consistent and rapid, overcoming several limitations associated with its capillary-driven passive mixing counterpart wherein irreproducibilities and nonuniformities are often encountered in the mixing along the channel--capillary-driven passive mixing offers only poor control, is strongly dependent on the paper's texture and fibre alignment, and permits backflow, all due to the scale of the fibres being significant in comparison to the length scales of the features in a microfluidic system. Using a novel hue-based colourimetric technique, the mixing speed and efficiency is compared between the two methods, and used to assess the effects of changing the input power, channel tortuousity and fibre/flow alignment for the acoustically-driven mixing. The hue-based technique offers several advantages over grayscale pixel intensity analysis techniques in facilitating quantification without limitations on the colour contrast of the samples, and can be used, for example, for quantification in on-chip immunochromatographic assays.     

Detecting pore size distribution of activated carbon by low-field nuclear magnetic resonance

In this study, the transverse relaxation time (T₂) of activated carbon (AC) in different relative environment humidity was detected firstly by low-field nuclear magnetic resonance (LFNMR). The pore size (diameter) of AC distributions was calculated by the relationship between T₂ and surface relaxation rate (ρ), where ρ was obtained by the detection of nine porous materials with known pore size. The results showed that the pore size distributions of AC calculated by ρ < 0.19 nm/ms were in good agreement with that obtained by nitrogen adsorption method and proved that LFNMR as a new detection method was feasible for characterizing AC pore size distribution.     

Self-consistent molecular orbital calculations of nuclear spin coupling constants in organosilicon compounds; trimethylsilyl systems

Finite perturbation calculations of carbon-silicon nuclear spin coupling constants in trimethylsilyl compounds have been carried out using an INDO scheme extended to the second row. Generally good agreement with experimental values is noted. Correlations between coupling constants and certain parameters related to hybridization and electron distribution are discussed.     

Unsteadiness and mixing in thermal plasma jets

This study was undertaken to examine the mechanisms which produce the large entrainment measured at the exit of thermal plasma torches. The experiments studied a Metco 7MB plasma torch with a 706 (6.35 mm diameter) anode nozzle and swirled argon gas injection. The vortex structure produced in the shear layer of the plasma jet was visualized using a laser shadowgraph system with a short exposure lime (10^–4 s). A high-speed video system provided information on the structure and unsteadiness of the hot potential core of the plume. Tile shear layer visualizations were compared to previous measurements of acoustical power spectra and indicate coherent vortex structure formation at low gas flowrates. At higher gas flowrates the shear layer rapidly broke down, producing relatively small scale turbulence. The visualizations of the hot potential core were compared to previous measurements of the torch voltage fluctuations caused by arc instabilities. At low flowrates the arc-produced voltage fluctuations were guile low card the phone was very steady. At higher flowrates the voltage fluctuations increased and produced surging and whipping in the hot potential core.     

The rotational spectrum,nuclear spin—spin coupling,nuclear quadrupole coupling,and molecular structure of KrHF

Rotational spectra have been assigned for the ⁸²Kr, ⁸³Kr, ⁸⁴Kr, and ⁸⁶Kr isotopic species of the KrHF and KrDF van der Waals molecules by using pulsed microwave Fourier transform spectroscopy in a Fabry—Perot cavity with a pulsed supersonic nozzle molecular source. The rotational, centrifugal distortion, nuclear spin—spin, and nuclear quadrupole coupling constants are used to determine the structure and obtain intramolecular potential binding information. The ⁸³Kr nuclear quadrupole coupling constants are 10.28 ± 0.08 MHz and 13.83 ± 0.13 MHz for KrHF and KrDF respectively. The electric field gradient at the krypton nucleus is calculated from the coupling constant and the known nuclear quadrupole moment and explained by Sternheimer shielding and formation of the van der Waals bond. There is a negligible charge transfer in the KrHF bond.     

Preparation of N-aryl-ketonitrone spin traps

The syntheses of seven N-aryl-C,C-dialkoxycarbonylnitrones 1–7, six of which were original, were achieved from the appropriate aryl-nitroso compounds. These ketonitrones were found to trap efficiently carbon-centred free radicals in aqueous media, yielding stable aminoxyl radicals whose EPR spectra lasted several days. The two penta-deuterated compounds 6 and 7 were also found to be efficient at trapping methoxyl radical. Their various spin adducts showed simple three line signals, very sensitive to the polarity of the environment. This study represents the very first use of linear ketonitrones as spin traps.     

Surface nuclear spin relaxation of 199Hg

We report the results of a detailed study of surface relaxation of 199Hg nuclear spins in paraffin coated cells. From measurements of the magnetic field and temperature dependence of the spin relaxation rates we determine the correlation time for magnetic fluctuations and the surface adsorption energy. The data indicate that surface relaxation is caused by dipolar coupling to paramagnetic sites on the surface. We also observe changes in the spin relaxation rate caused by ultraviolet radiation resonant with the 254 nm transition in Hg.     

Enantiomers of polarized alkenes: chromatographic enrichment and thermal interconversion

(+)- and (?)-$\text{1}$ as well as (+)- and (?)-$\text{2}$ were partially separated by liquid chromatography on triacetylcellulose; racemizations resulted in the barriers (Table 2) to rotation via planarized transition states.     

NMR and nuclear spin relaxation of cement and concrete materials

Recent highlights of NMR works are reviewed for various cement-based materials. The emphasis is on nuclear magnetic relaxation methods at variable magnetic fields for continuous characterization of the evolving microstructure of various cementitious materials. Also, the recent applications of 2-dimensional T₁–T₂ and T₂–store–T₂ correlation experiments for characterization of water exchange in connected micropores of cement pastes are reported.     

Nuclear reactivity indices in the context of spin polarized density functional theory

In this work, the nuclear reactivity indices of density functional theory have been generalized to the spin polarized case and their relationship to electron spin polarized indices has been established. In particular, the spin polarized version of the nuclear Fukui function has been proposed and a finite difference approximation has been used to evaluate it. Applications to a series of triatomic molecules demonstrate the ability of the new functions to predict the geometrical changes due to a change in the spin multiplicity. The main equations in the different ensembles have also been presented.     

Preparation process of a highly resistant wollastonite bioceramics using local raw materials

Wollastonite (CaSiO₃) is mainly used for traditional ceramics. In this study, wollastonite-based ceramics was obtained by solid state reaction. The starting powders were sintered at different temperatures (850–1,250 °C) for 2 h. Moreover, different amounts of B₂O₃ (0.5–5.0 mass%) have been added. A relative density of about 97% of the theoretical was reached for samples sintered at 1,050 °C for 2 h, containing 3 and 5 mass% B₂O₃. Excellent values of both three point flexural strength (343 ± 34 MPa) and micro-hardness (4.8 GPa) for samples containing 5 mass% B₂O₃, sintered at 1,050 °C for 2 h. Besides this, a relatively low mass loss ratio has been measured (1.1%) for wollastonite samples containing 5 mass% B₂O₃, sintered under the same conditions, after soaking in lactic acid for 9 days. Finally, the bioactivity of wollastonite by the possibility of formation of apatite on the surface of wollastonite immersed in simulated body fluid was confirmed.     

Spectrophotometric determination of thermal transition of polymeric systems using photochromic probes

Mercury-dithizone complex both free and bonded to a polymeric system has been synthesized and used to measure the thermal transition of polystyrene, poly(vinyl acetate), and some other polymers. The thermal relaxation rate of the activated complex in dark has been found to be dependent on the free volume of a polymer matrix. The rate goes through a maximum above T_g of a polymer. A very sensitive method, based on thermal recovery of activated photochromic probe chromophore has been devised to measure the thermal transition of both single and multicomponent polymer matrices. © 1995 John Wiley & Sons, Inc.     

Nuclear spin–spin coupling and nuclear motion

The vibration and rotation of molecules affects nuclear spin–spin coupling constants. This manifests itself as a temperature dependence of the coupling and also as an isotope effect (after allowing, where necessary, for differing magnetogyric ratios of the two nuclei involved in the isotopic substitution). Within the Born–Oppenheimer approximation, a nuclear spin–spin coupling surface can be defined for each pair of coupled nuclei. This surface is sampled by the nuclei as they undergo the excursions about equilibrium geometry that are governed by the force field. An accurate ab initio carbon–proton spin–spin coupling surface for the methane molecule has been calculated. This was obtained by summing the surfaces for each of the four contributions—Fermi contact, spin–dipolar, orbital paramagnetic, and orbital diamagnetic—expressed as power series in terms of symmetry coordinates. Preliminary calculations for ¹³CH₄ and ¹³CD₄ give a difference of only 6% between the calculated and observed nuclear motion contributions. The observed temperature dependence is also accounted for by the calculations. For these isotopomers, bond stretching plays the dominant role. © 1994 John Wiley & Sons, Inc.