Sorption and diffusion of organic vapors in poly[bis(trifluoroethoxy) phosphazene] and poly[bis(phenoxy)phosphazene] membranes

The sorption isotherms and diffusivities for vapors of some selected simple alcohols (methanol, ethanol, isopropanol, and 2-butanol), ketones (acetone, methyl ethyl ketone, and methyl isobutyl ketone), and aromatic compounds (benzene, toluene, and xylene) in poly[bis(trifluoroethoxy)phosphazene] (PTFEP) and poly[bis(phenoxy)phosphazene] (PPOP) were determined by integral sorption-desorption experiments at 35°C. The sorption isotherms for these compounds evaluated were almost linear to obey Henry's law for the determination of constant solubility of each solvent vapor species, and the corresponding permeabilities for them can be estimated according to the solution-diffusion model. The diffusivities for these vapors in PPOP (10⁻⁹∼10⁻⁸ cm²/s) were about one order smaller than those in PTFEP (10⁻⁸∼10⁻⁷ cm²/s) because the more rigid phenoxy groups and the higher crystallinity in PPOP may hinder the diffusion of sorbed molecules. Relatively weak dependence of diffusivity or permeability on the vapor activity (or concentration) was found, to be in contrast to the exponential dependence for many organic vapors in rubbery organic polymers, probably due to the limited increase of the free volume in sorption for these vapors in PTFEP and PPOP membranes.     

Synthesis,casting, and diffusion testing of poly[bis(trifluoroethoxy)phosphazene] membranes

Polyphosphazenes were selected as a polymer system for membranes with high temperature stability and high chemical resistance. This relatively new class of compounds is based on a nitrogen/phosphorus backbone rather than a carbon backbone, and the literature reports high temperature stability. Poly[bis(trifluoroethoxy)phosphazene] was synthesized, and membranes were cast and tested. A test apparatus was designed and fabricated to allow high temperature testing. Diffusion experiments were performed with methanol, ethanol, isopropanol, and phenol. This membrane material is permeable to these alcohols and is stable up to 179°C. However, no separation was observed.     

Thermally stimulated currents in poly(bis(p-fluorophenoxy)phosphazene)

Thermally stimulated currents (TSC) were examined for poly(bis(p-fluorophenoxy)phosphazene) (PBFPP) film. TSC showed peaks at the glass transition temperature (Tg=–4 °C) and atT(1) (160 °C – 170 °C), where-form crystal phase transformed to mesophase of-form structure. Another peak was found atT _cc betweenTg andT(1). Linear relationship between polarization field and peak current ofT _cc -peak was found, which shows thatT _cc -peak was caused by motion of dipolar groups in crystalline phase. When heating (up to 200 °C) and cooling (down to 20 °C) thermal process was repeated,T _cc -peak shifted to higher temperature region approachingT(1) and simultaneously, the peak current ofT(1)-peak became smaller. Activation energy, time constant of dipolar relaxation and charge mobility were evaluated forT _cc -peak. From these results, it was concluded that-form and more ordered- form crystalline phases coexisted in PBFPP once heated aboveT(1) and the content of- form phase increased by repeated thermal hysteresis.     

The thermal transition behavior of poly(bis(p-flourophenoxy)phosphazene)

The thermal transition behavior of poly(bis(p-fluorophenoxy)phosphazene) was studied as a representative aryloxy-substituted poly(organophosphazene) using X-ray diffraction, differential thermal analysis and density measurements. The crystal structure of-form contained in as-cast film had marked paracrystalline disorder. The crystal phase transformed into the mesophase atT(1) (110 140 °C). The structure of the-form observed in the mesophase was a representative hexagonal-packing of macromolecular chains which rotate around the chain axes. When the mesophase was cooled to room temperature, a more ordered crystal phase of the-form could appear. The most ordered crystal structure of the-form has a monoclinic unit cell with the following lattice parameters: a=18.9, b=13.2, c=4.90 Å, and=77°. The chain conformation is nearly planar cis-trans, which has been observed commonly in poly(organophosphazenes). The macroscopic deformation of the film sample was also examined, taking into account the microscopic deformation of the lamellar crystal due to the crystal-mesophase transition.     

Electrical properties of poly(bis(β-phenoxyethoxy)phosphazene) and its complexes

Electrical and dielectrical properties of poly(bis(-phenoxyethoxy)phosphazene) (I) and its complexes with various content ratios of AgSO₃CF₃ to monomeric unit (0.25/1 (II) and 0.5/1 (III) in molar ratio) were investigated.Dc conductivity of respective samples at 18 °C were 6.1×10^–12, 4.4×10^–9, and 7.1×10^–8 S/m.Dc conduction was considered to be due to ion hopping. Charge mobility ranged from 3×10^–12 to 6× 10^–11 m²/Vs depending on the applied field in sample II. In sample I, a tan peak was found which can be ascribed to molecular relaxation of main chains. The peak vanished upon introducing AgSO₃ CF₃. Temperature dependence of total conductivity ( _T ) measured byac method in the temperature range between –150 °C and 50 °C showed several peaks at the temperatures corresponding to the peak temperatures of tan. Total conductivities of respective samples at 100 kHz were 4.9×10^–7 (69 °C), 1.7×10^–4 (45 °C), and 1.5×10^–4(40°C)S/m.     

Solution-grown crystal of poly[bis(4-isopropylphenoxy)phosphazene]

The structural features of poly[bis(4-isopropylphenoxy)phosphazene] (PB(4-ip)PP) have been studied by electron microscopy, X-ray diffraction and differential scanning calorimetry techniques. Its orthorhombic lattice constants are determined as follows: a = 3,14 nm, b = 1,14 nm, c = 0,992 nm. The space group of this polymer is suggested to be P 2₁2₁2₁–D, and the molecular conformation of the chains possibly to be (trans₃cis)₂. This polymer exhibits a crystal/crystal transition at 86°C below its T(1) transition (120°C). The thermal behavior is similar to the characteristics of poly[bis(p-methoxyphenoxy)phosphazene].     

聚膦腈-g-聚己内酯共聚物的合成与表征

通过三甲基碘硅烷与聚二(2-甲氧基乙氧基)膦腈侧链上的醚键反应后水解得到侧链含部分羟基的聚膦腈,然后利用聚膦腈的侧链羟基在异辛酸亚锡催化作用下,引发己内酯单体开环聚合制备了聚膦腈-g-聚己内酯共聚物.该共聚物中聚己内酯链段的接枝率和侧链长度可通过改变三甲基碘硅烷和己内酯单体的投料来控制.     

Preparation of poly(diphenyl phosphazene)

The preparation of substituted polyphosphazenes has been briefly surveyed. A method of synthesis of a fully substituted poly(diphenyl phosphazene) has been investigated. The product has been characterized and thermogravimetric analysis carried out. The volative products of pyrolysis have been identified and the hydrolytic stability of the polymer tested.     

Plasma surface functionalization of poly[bis(2,2,2-trifluoroethoxy)phosphazene] films and nanofibers

Polyphosphazenes are a class of hybrid organic-inorganic macromolecules with high thermo-oxidative stability and good solubility in many solvents. Fluoroalkoxy phosphazene polymers also have high surface hydrophobicity. A method is described to tune this surface property while maintaining the advantageous bulk materials characteristics. The polyphosphazene single-substituent polymer, poly[bis(2,2,2-trifluoroethoxy)phosphazene], with flat film, fiber mat, or bead mat morphology was surface functionalized using an atmospheric plasma treatment with oxygen, nitrogen, methane, or tetrafluoromethane/hydrogen gases. Surface chemistry changes were detected by static water contact angle (WCA) measurements as well as X-ray photon spectroscopy (XPS). It was found that changes in the WCA of as much as 150 degrees occurred, accompanied by shifts in the ratio of elements on the polymer surface as detected by XPS. Overall this plasma technique provides a convenient method for the generation of specific surface characteristics while maintaining the hydrophobicity of the bulk material.     

Environmentally responsive micelles from polystyrene–poly[bis(potassium carboxylatophenoxy)phosphazene] block copolymers

Amphiphilic diblock copolymers that contained hydrophilic poly[bis(potassium carboxylatophenoxy)phosphazene] segments and hydrophobic polystyrene sections were synthesized via the controlled cationic polymerization of Cl₃P?NSiMe₃ with a polystyrenyl–phosphoranimine as a macromolecular terminator. These block copolymers self‐associated in aqueous media to form micellar structures which were investigated by fluorescence spectroscopy, dynamic light scattering, and transmission electron microscopy. The size and shape of the micelles were not affected by the introduction of different monovalent cations (Li⁺, K⁺, Na⁺, and Cs⁺) into the stable micellar solutions. However, exposure to divalent cations induced intermicellar crosslinking through carboxylate groups, which caused precipitation of the ionically crosslinked aggregates from solution. This micelle‐coupling behavior was reversible: the subsequent addition of monovalent cations caused the redispersion of the polystyrene‐block‐poly[bis(potassium carboxylatophenoxy)phosphazene] (PS–KPCPP) block copolymers into a stable micellar solution. Aqueous micellar solutions of PS–KPCPP copolymers also showed pH‐dependent behavior. These attributes make PS–KPCPP block copolymers suitable for studies of guest retention and release in response to ion charge and pH. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2912–2920, 2005     

Gas transport in poly [bis(trifluoroethoxy) phosphazene] above the T(1) transition

Gas permeation measurements were performed by the time-lag method for 13 gases in poly [bis(trifluoroethoxy) phosphazene] above the mesophase transition, T (1) transition, of the crystals. Hysteresis was found in the temperature dependence of the permeability coefficients for CO₂, O₂, and N₂ in the transition region as observed by dilatometry and differential scanning calorimetry. Independently the solubility of CO₂ was determined gravimetrically above and below T(1). Noticeable change and hysteresis were also observed in the temperature dependence of the solubility coefficients. Diffusion of CO₂ in the measophase is suggested from the permeation and sorption measurements. Gas transport parameters of CO₂ in the mesophase are estimated, and the contributions of the mesophase and the crystalline phase to gas transport are considered.     

聚双(6-咔唑基己氧基)磷腈的合成

以PCl5和NH4Cl为原料采用"一步法"合成了线型聚二氯磷腈(4);4与6-咔唑基己醇发生亲核取代反应合成了聚双(6-咔唑基己氧基)磷腈(5),其结构经1H NMR,31P NMR,IR和GPC表征。热分析结果表明,5具有良好的热稳定性和较高的玻璃化温度。     

Separation of poly(vinyl chloride) from poly(ethylene terephthalate) by micronyl process

Mixed Poly(vinyl chloride) (PVC) and Poly(ethylene terephthalate)(PET) scraps can be separated by various methods based on the difference in their physical or chemical properties. A short review of the presently known methods is made. The presentation is focused on a method developed by MICRONYL WEDCO and based on the difference in impact strength resistance of the two polymers at room temperature.     

Poly[bis(2,2,2-trifluoroethoxy)phosphazene] superhydrophobic nanofibers

Nanofibers of poly[bis(2,2,2-trifluoroethoxy)phosphazene] were produced by electrospinning from solutions in tetrahydrofuran, methylethyl ketone, and acetone. The fiber diameter varied from 80 nm to 1.4 microm by changes in the concentration of the polymer solution. The electrospun nonwoven mats showed enhanced surface hydrophobicity compared to spun cast films with up to a 55 degrees increase in water contact angle. The hydrophobicity varied with fiber diameter and surface morphology, with contact angles to water being in the range of 135 degrees -159 degrees. A low value of hysteresis (<4 degrees) was recorded for the superhydrophobic surfaces. The extremely high hydrophobicity of these mats is a combined result of a fluorinated surface and the inherent surface roughness of an electrospun mat.     

聚双(对羟基苯甲酸甲酯)磷腈的合成及表征

通过一步法合成线性聚二氯磷腈(PDCP),并用对羟基苯甲酸甲酯与线性聚二氯磷腈(PDCP)反应合成聚双(对羟基苯甲酸甲酯)磷腈,运用~1HNMR、~(13)C NMR、~(31)P NMR及FT-IR对其结构进行了表征。DSC和TGA实验表明该聚合物的T_g有了明显的提高且具有较好的热稳定性。