EQUILIBRIA AND REACTION RATES OF PHOSPHORUS SUBSTITUTION REACTIONS IN 2-R-1,3,2-DISUBSTITUTED PHOSPHORINANES

Abstract

Equilibrium constants and reaction times were observed for six equilibria involving methanol, ethanol, dimethylamine, diethylamine and pyrrolidine with 2-R-1,3,2-dioxaphosphorinanes wherein R = MeO (1), EtO (2), Me₂N (3), Et₂N (4) and (CH₂)₄N (5), or 2-R-1,3-dimethyl-1,3,2-diazaphosphorinanes wherein R equalled the same five groups (6–10, respectively). Reaction times of amine substitutions were shorter for diaza compounds and for those reactions which contained pyrrolidine. Equilibrium constants were dependent not only upon the nucleophilicities of the exchanging groups, but also upon the steric interactions of the 2-substituents with the groups in the 1 and 3 positions. Thus, the values of K's for the equilibria 5 + Me₂NH → 3 + (CH₂)₄NH, and 10 + Me₂NH → 8 + (CH₂)₄NH were experimentally identical, whereas K for 9 + Me₂NH → 8 + Et₂NH was ca. eight times that for 4 + Me₂NH → 3 + Et₂NH. The reactions were acid catalyzed, and, for amine substitutions with 8–10, exchange could be rapid on the NMR time scale. Equilibrium positions of amine-containing reactions were [H⁺] dependent, where coordination of the less basic amine to phosphorus became increasingly favored by the addition of acid. These observations raise questions about a recent mechanistic proposal for catalyzed substitution reactions. Similar substitution reactions, such as Me₂NH with the isomeric 4-methyl analogues of 3, provide a procedure for the determination of cis-trans isomer equilibrium distributions.     

Spontaneous hydration of the carbonyl group in substituted propynals in aqueous medium

Uncatalyzed hydration of the carbonyl group in substituted propynals in aqueous medium was studied by ¹H NMR spectroscopy in D₂O. The concentration of the resulting geminal diols in the equilibrium mixture was found to strongly depend on the substituent at the triple bond; it decreased in the R series Me₃Si > Me₂COH > Me₃C > Ph > Et₃Ge. Elevated temperature induced shift of the equilibrium toward the initial aldehyde. According to the 2D ROESY data, the geminal diol moiety in hydrated 3-trimethylsilylpropynal is effectively involved in the complex formation with β-cyclodextrin.     

Cycloaddition Reactions of (NSCl)3 with Organic Nitriles

Abstract

The six-membered ring system RCN(NSCl)₂ (R= ^tBu, CCl₃, Me₂N, Et₂N, ⁱPr₂N) can be prepared by a cycloaddition reaction of the free nitrile, RCN, with cyclo-(NSCl)₃ at mom temperature. This reaction is slow for R= ^tBu and CCl₃, but it can be accelerated by UV light. The six-membered rings are converted to five-membered rings RCN₂S₂ ⁺ Cl^- by thermolysis. By varying the conditions of the cycloaddition reaction, 1,3-(RCN)₂(NSCl)₂ (R= Me₂N, Et₂N) and 1,5- RCN(NSN)₂SCl can be obtained.     

The Reaction of Diethylthiophosphinyl Iodide,Et2P(S)I,with Nucleophiles

The compound Me₂AsSI can exist in two different forms, either as dimethylarsinosulfenyl iodide [or (iodothio)dimethylarsane)], Me₂As–S–I ( A ), or as dimethylthioarsinyl iodide (or dimethylarsinothioic iodide), Me₂As(S)–I ( B ). To confirm that the structure of the product of the reaction between Bunsen's cacodyl disulfide Me₂As(S)–S–AsMe₂ and iodine is A and not B , the known diethylthiophosphinyl iodide (or diethylphosphinothioic iodide), Et₂P(S)–I ( 2 ) was prepared and its hydrolytic stability and reactivity towards a variety of nitrogen, phosphorus(III), arsenic(III), oxygen, and sulfur(II) nucleophiles were studied. The results indicated that only a few reactions of 2 resembled those of A , thus strengthening the proposal that the reaction of Bunsen's cacodyl disulfide with iodine produced A and not B . A series of ³¹P NMR chemical shifts of diethylthiophosphinyl moiety is also reported. Et₂P(S)–DMAP, synthesized and isolated during the presented study, is the ethyl analogue of Me₂P(S)–DMAP, previously described as an important molecule. In our case, Et₂P(S)–DMAP was found to be a good intermediate for the synthesis of phosphoryl or thiophosphoryl derivatives since it was more reactive than 2 towards nucleophiles.     

Synthese neuer Aminofluorsilane,sowie Alkoxylierung von Bis (trimethylsilyl)-amino-fluorsilanen

The reaction of aminofluorsilanes of the type (R=H,F) (Me ₃Si)₂N?SiF₂R with two moles of ammonia, or of a mono- or dialkylamine, yields the corresponding amino-compounds, e.g. (Me ₃Si)₂N?Si(F)R?NH₂, (Me ₃Si)₂N?Si(F)R?NHR′ and (Me ₃Si)₂N?Si(F)R?NR₂′ (R′=Me, Et). Analogous products are obtained by reaction of the aminofluorosilanes with lithium salts of amines with bulky organic substituents in a 1 : 1 molar ratio. Alkoxy- and aryloxyaminofluorosilanes are prepared by the reaction of sodium alcoholates and sodium phenolate with (Me ₃Si)₂N?Si(F₂)R (R=H, C₂H₃, C₂H₅, C₆H₅). The i.r.-, mass-,¹H- and¹⁹F-NMR spectra of the above compounds are reported.     

Reactions of alkynes with bis(triphenylphosphine)platinum-ethylene: A 31P-{1H} NMR study

Internally consistent assignments of the ³¹P-{¹H} NMR parameters of the complexes [Pt(RCCR′)(PPh₃)₂] are proposed, based on the premise that the magnitude of ¹J(PtP) depends mainly on the nature of the moiety CR trans to P. For a given R, ²J(PP) correlates with ¹J(PtP) for thebond trans to CR. The alkynes PhCCSnEt₃, PhCCSnPh₃, Me₃SiCCCl, Me₃SiCCBr, Et₃SiCCI and MeCCI undergo oxidative addition reactions with [Pt(C₂H₄)(PPh₃)₂]; the intermediate alkyne complex was detected for PhCCSnEt₃, Me₃SiCCCl and Me₃CCBr. The triyne Me(CC)₃Me forms platinum(0) complexes by coordination with the central or terminal CC bond and appears also to give a platinum(II) complex by oxidative addition.     

Reactions of alkynes with bis(triphenylphosphine)platinum-ethylene: A P-{H} NMR study

Internally consistent assignments of the ³¹P-{¹H} NMR parameters of the complexes [Pt(RCCR′)(PPh₃)₂] are proposed, based on the premise that the magnitude of ¹J(PtP) depends mainly on the nature of the moiety CR trans to P. For a given R, ²J(PP) correlates with ¹J(PtP) for thebond trans to CR. The alkynes PhCCSnEt₃, PhCCSnPh₃, Me₃SiCCCl, Me₃SiCCBr, Et₃SiCCI and MeCCI undergo oxidative addition reactions with [Pt(C₂H₄)(PPh₃)₂]; the intermediate alkyne complex was detected for PhCCSnEt₃, Me₃SiCCCl and Me₃CCBr. The triyne Me(CC)₃Me forms platinum(0) complexes by coordination with the central or terminal CC bond and appears also to give a platinum(II) complex by oxidative addition.     

An efficient synthesis of 1-cyanoacetyl-5-halomethyl-4,5-dihydro-1H-pyrazoles in ionic liquid

The synthesis of eleven 1-cyanoacetyl-5-hydroxy-5-halomethyl-4,5-dihydro-1H-pyrazoles from the reaction of 4-alkoxy-3-alken-2-ones f(R ³C(O)C(R ²) = C(R ¹)OR, where R ³ = CF₃, CCl₃, CHCl₂, CO₂ Et; R ²/R ¹ = H/H, H/Me, H/Et, -(CH₂)₄-, Me/H, H/Pr, and R = Me, Et) with cyanoacetohydrazide is reported. The reaction was carried out in the ionic liquid ([bmim][BF₄]) and molecular solvents. The results showed that when the ionic liquid was used as reaction medium, the reaction time was drastically decreased and the yield was improved.     

Polymerization of acrylonitrile by catalytic systems consisting of triphenylphosphine and a lewis acid

Polymerization of acrylonitrile in the presence of systems that consisted of triphenylphosphine (PPh₃) and a Lewis acid R_mMX_n (ZnCl₂, Me₃Al, Et₃Al, Et₂AlCl, EtAlCl₂, AlCl₃) was studied. The systems that contained Me₃Al and Et₃Al (i.e., Lewis acid of moderate acidity) were the most efficient catalysts. Conductometric measurements carried out in the polymerization systems showed the presence of ions. The presence of phosphonium cation in the polyacrylonitrile chain formed by the PPh₃–R_mMX_n catalytic systems was determined by IR, ¹H-NMR, and ³¹P-NMR spectroscopy. The average molecular weight measurements and kinetic chain lengths of polyacrylonitrile formed within the reaction time in the presence of PPh₃–Et₃Al showed that transfer reactions occur. According to the results obtained, the polymerization reaction of acrylonitrile by PPh₃–R_mMX_n involved a zwitterion formed by the attack of PPh₃ on acrylonitrile complexed by Lewis acid [Ph₃P^⊕? CH₂? C^?H? C?N → MR_mX_n] and the anion [CH₂?C^?? C?N] formed by the proton abstraction from the monomer.     

Activation of CS2 and CO2 by Silylium Cations

The hydride-bridged silylium cation [Et₃Si−H−SiEt₃]⁺, stabilized by the weakly coordinating [Me₃NB₁₂Cl₁₁]⁻ anion, undergoes, in the presence of excess silane, a series of unexpected consecutive reactions with the valence-isoelectronic molecules CS₂ and CO₂. The final products of the reaction with CS₂ are methane and the previously unknown [(Et₃Si)₃S]⁺ cation. To gain insight into the entire reaction cascade, numerous experiments with varying conditions were performed, intermediate products were intercepted, and their structures were determined by X-ray crystallography. Besides the [(Et₃Si)₃S]⁺ cation as the final product, crystal structures of [(Et₃Si)₂SMe]⁺, [Et₃SiS(H)Me]⁺, and [Et₃SiOC(H)OSiEt₃]⁺ were obtained. Experimental results combined with supporting quantum-chemical calculations in the gas phase and solution allow a detailed understanding of the reaction cascade.     

The Reaction of Selenium Trioxide with Dialkyl Ethers

The donor‐acceptor complexes Et₂O·SeO₃ and (Me₂O)₂·SeO₃ can be obtained as primary products by the reactions of selenium trioxide with dimethyl ether (Me₂O) and diethyl ether (Et₂O). The crystal and molecular structure of both complexes, which are stable below their melting points only, was determined by X‐ray structure analysis. Pairs of molecules Et₂O·SeO₃ form dimers due to two weak intermolecular Se···O contacts. No intermolecular interactions were observed in (Me₂O)₂·SeO₃. Trigonal bipyramidal coordination around Se^VI atoms in the latter complex is almost undistorted. Conversion of the adducts to dialkylesters of diselenic and selenic acid in the liquid phase was monitored by Raman, ¹H‐ and ⁷⁷Se‐NMR spectroscopy.     

An efficient synthesis of 1-cyanoacetyl-5-halomethyl-4,5-dihydro-1<Emphasis Type="Italic">H</Emphasis>-pyrazoles in ionic liquid

The synthesis of eleven 1-cyanoacetyl-5-hydroxy-5-halomethyl-4,5-dihydro-1H-pyrazoles from the reaction of 4-alkoxy-3-alken-2-ones f(R ³C(O)C(R ²) = C(R ¹)OR, where R ³ = CF₃, CCl₃, CHCl₂, CO₂ Et; R ²/R ¹ = H/H, H/Me, H/Et, -(CH₂)₄-, Me/H, H/Pr, and R = Me, Et) with cyanoacetohydrazide is reported. The reaction was carried out in the ionic liquid ([bmim][BF₄]) and molecular solvents. The results showed that when the ionic liquid was used as reaction medium, the reaction time was drastically decreased and the yield was improved. Correspondence: Marcos A. P. Martins, Núcleo de Química de Heterociclos – NUQUIMHE, Universidade Federal de Santa Maria, Santa Maria, RS, Brazil.     

Radiochemical study of gas-phase reactions of diethylstannyl cations Et2SnT+ with oxygen-containing compounds: II. Reaction of diethylstannyl cations with butanol

Gas-phase reaction of nucleogenic diethylstannyl cations Et₂SnT⁺ with butan-1-ol has been studied by the radiochemcal method, and probable reaction mechanisms have been proposed. During the process diethylstannyl cations undergo isomerization into tertiary Me₂EtSn⁺ cations and rearrangement with elimination of ethane. Thermochemical parameters of reactions of diethyl-substituted cations derived from Group 14 elements (Et₂TM⁺; M = C, Si, Ge, Sn) with alcohols have been analyzed by the M06L aug-cc-pVDZ quantum chemical method.     

Synthesen und Kristallstrukturanalysen von Tetraalkylphosphonium-, -arsonium- und -stiboniumtriiodiden

Syntheses and Crystal Structure Analyses of Tetraalkyl Phosphonium, Arsonium, and Stibonium Triiodides The reaction of Me₄EI (E?P, As), Me₃EtSbI, Me₂Et₂SbI, MeEt₃SbI, or Et₄SbI with I₂ in absence of solvent gives Me₄PI₃ (E?P, As), Me₃EtSbI₃, Me₂Et₂SbI₃, MeEt₃SbI₃, or Et₄SbI₃. Me₄SbI₃ is formed in a reversible reaction by addition of I₂ to (Me₄Sb)₃I₈ or by reaction of a solution of Me₄SbI in ethanol with I₂ in benzene. The crystal structures of Me₄EI₃ (E?P, Sb), and Me₃EtSbI₃ and the syntheses of the novel compounds are reported.     

Characterization of [ReO(Tetramethylthiourea)4](PF6)3 in Solution: Electrochemical,NMR and Ligand Substitution Studies

The complex [ReO(Me₄tu)₄]³⁺, with Me₄tu = tetramethylthiourea, is characterized in nonaqueous media. Its structure is studied in acetonitrile solution by ¹H and ¹³C NMR and its electrochemical behavior in the same solvent is analyzed by means of cyclic voltamperometric measurements. Heteronuclear correlation and variable temperature NMR experiments suggest that the complex ion shows a similar structure in solution and in the solid state. At low temperatures (below 0°C) free rotation of the dimethylamine groups around the thiocarbonyl carbon-nitrogen bond is restricted and the dissolved complex adopts the rigid structure observed in the solid state. Cyclic voltamperometric results suggest that the redox behavior of this compound can be explained through an E_rC_iE_r mechanism (a chemical reaction coupled between two electron-transfer reactions). An initial one electron reduction of the complex from Re(V) to Re(IV) followed by an irreversible chemical reaction, leads to a new electroactive species of Re(IV)*, which is reduced to Re(III). The ability of [ReO(Me₄tu)₄](PF₆)₃ to serve as a precursor for other Re(V) complexes by ligand substitution is established, in acetone solution, with different kinds of incoming ligands: diethyldithiocarbamate (Et₂dtc), ethylenediamine (en) and pyridine (py). The previously known complexes [Re^v ₂O₃(Et₂dtc)₄], [Re^VO₂(en)₂](PF₆) and [Re^VO₂(py)₄](PF₆) are easily synthesized under mild conditions with high yields.     

Studies on the effect of the cation nature on the kinetics of the isotopic exchange reaction between chloride ion and O,O-diphenylphosphorochloridothionate in acetonitrile

Rate constants and activation parameters for the isotopic exchange reactions between (PhO)₂PSCl and M³⁶Cl (M = Me₄N⁺, Et₄N⁺, n-Bu₄N⁺, Et₃HN⁺, EtH₃N⁺, Li⁺) in acetonitrile were measured in order to find the effect of the cation nature onthe kinetics of the reaction. The rate constants measured for a range of concentrations of Et₃HN³⁶Cl, EtH₃N³⁶Cl, and Li³⁶Cl were analyzed using the Acree equation. The equivalent conductance of LiCl in acetonitrile was determined. The nature of the cation has no effect on the mechanism of the reaction. The cation changes only the experimental rate constant proportionally to the dissociation degree of the salt. Smaller values of the rate constant and smaller activation parameters ΔH? and ΔS? for the reaction with Li³⁶Cl indicate the existenceof the intermolecular interaction between lithium ions and O,O-diphenylphosphorochloridothionate.     

SYNTHESIS AND NMR CHARACTERIZATION OF P-VINYL SUBSTITUTED PHOSPHAZENE PRECURSORS1

Abstract

The reactions of either PhPCl₂ or PCl₃ with (Me₃Si)₂NLi followed by H₂C[dbnd]CHMgBr were used to prepare the new P-vinyl substituted [bis(trimethylsilyl)amino]phosphines, (Me₃Si)₂NP(R)CH[dbnd]CH₂ [1: R=Ph, 2: CH[dbnd]CH₂, 3: R=Me, and 4: R=N(SiMe₃)₂]. Oxidative bromination of phosphines 3–1 afforded the P-bromo-P-vinyl-N-(trimethylsilyl)phosphoranimines, Me₃SiN[dbnd]P(CH[dbnd]CH₂)(R)Br [5: R=Ph, 6: R=CH[dbnd]CH₂, 7: R=Me], which, upon treatment with CF₃CH₂OH/Et₃N, were subsequently converted to the P-trifluoroethoxy derivatives, Me₃SiN[dbnd]P(CH[dbnd]CH₂)(R)OCH₂CF₃ [8: R=Ph, 9: R=CH[dbnd]CH₂, 10: R=Me]. Compounds 1–10, which are of interest as potential precursors to P-vinyl substituted poly(phosphazenes), were fully characterized by elemental analyses (except for the thermally unstable P-Br derivatives 5–7) and NMR spectroscopy (¹H, ¹³C, and ³¹P) including complete analysis of the vinylic proton splitting patterns via HOM2DJ experiments.     

Hydrolysis of platinum(II) phosphine complexes in aqueous 1.0 M NaNO3 medium

Hydrolysis of [Pt(PR₃)₂]²⁺ (R=Me, Et) have been investigated at 25.0°C in 1.000 M NaNO₃ by the combined emf–NMR method. Quantitative analysis of the emf and ³¹P NMR data revealed the formation of [{Pt(PR₃)₂(μ-OH)}₂]²⁺ as the only hydrolysis product in the range 1.5<−log h<5.7. Least-squares calculation gave log β_Me=−4.19±0.04 and log β_Et=−3.58±0.04, where β_Me and β_Et stand for the formation constants of the dimeric cations of methyl and ethyl derivatives, respectively. The ¹⁹⁵Pt NMR data were also consistent with this model.     

Use of Neodymium Diiodide in the Synthesis of Organosilicon, ‐Germanium and ‐Tin Compounds

The reactivity of neodymium diiodide, NdI₂ ( 1 ), towards organosilicon, ‐germanium and ‐tin halides has been investigated. Compound 1 readily reacts with Me₃SiCl in DME to give trimethylsilane (6 %), hexamethyldisilane (4 %) and (Me₃Si)₂O (19 %). The reaction with Et₃SiBr in THF results in formation of Et₃SiSiEt₃ (17 %) and Et₃SiOBuⁿ (34 %). Alkylation of Me₃SiCl with PrⁿCl in the presence of 1 in THF affords Me₃SiPrⁿ (10 %), Me₃SiOBuⁿ (52 %) and Me₃SiSiMe₃ (1 %). The main product identified in the reaction mixture formed upon interaction of 1 with dichlorodimethylsilane Me₂SiCl₂ in THF is di‐n‐butoxydimethylsilane Me₂Si(OBuⁿ)₂ (54 %) together with minor amounts of Me₂Si(OBuⁿ)Cl. The reaction of 1 with Me₃GeBr under the same conditions produces Me₃GeGeMe₃ (44 %), Me₃GeH (3 %), and Me₃GeI (7 %). An analogous set of products was obtained in the reaction with Et₃GeBr. Treatment of trimethyltin chloride with 1 causes reduction of the former to tin metal (74 %). Me₃SnH (7 %) and hexamethyldistannane (11 %) were identified in the volatile products. The reaction of 1 with Me₃SiI provides straightforward access to hepta‐coordinated NdI₃(THF)₄ ( 2 ), the structure of which was determined by X‐ray diffraction.     

Trimer–dimer equilibrium studies of alkylaluminum alkoxides

The aluminum alkoxides [MeClAlOEt]₃ (1), [Et₂AlOMe]₃ (2), [Me₂AlOEt]₃ (3), and [EtClAlOEt]₃ (4) were investigated by ¹H NMR spectroscopy to study the o-dichlorobenzene solution equilibrium: 2 [R₂AlOR′]₃⇌3 [R₂AlOR′]₂. The complexes are shown to exist primarily as trimers at room temperature, but increasing concentrations of the dimeric form are observed at higher temperatures. Equilibrium constants, ΔH, and ΔS were determined for the trimer–dimer equilibrium. Values of ΔH for the conversion of 2 moles of trimer are 63(4), 78(1), 85.0(8), and 99(6) kJ for 1, 2, 3, and 4, respectively. The corresponding values of ΔS are 142(7), 184(3), 218(2), and 265(17) J/K, respectively. Thermodynamic parameters are compared with those reported for [Me₂AlOPrⁿ]₃ and [Me₂AlOPh]₃. The characterization of [EtClAlOMe]₃ is also reported.