Calculations on transitions in singly- and doubly-excited C IV

Wavelengths for transitions in the quartet spectrum of C IV are calculated and compared with recent experimental measurements. Transition probabilities and radiative lifetimes are also predicted for several of the lowest 1s 2snl ⁴ L and 1s2pnl ⁴ L levels up toL=4. In addition, wavelengths and transition probabilities for some recently observed C IV doublet transitions to then=4 level are presented.     

Wavelengths,transition probabilities and lifetimes in the quartet spectra of O VI and F VII

A model-potential method is employed to describe core-excited 1s2snl ⁴ L and 1s2pnl ⁴ L levels of the ions O VI and F VII. Wavelength, transition probability and lifetime data are predicted. The calculated wavelengths and lifetimes are compared with the available experimental measurements.     

Autoionisation resonances in the photoabsorption spectra of Ge I and Sn I

We report new measurements in the photoabsorption spectra of Ge I and Sn I in the vacuum ultraviolet region. The spectra were recorded in the first order of a 1-metre vacuum spectrograph using synchrotron radiation as the background source of continuum. Autoionisation resonances above the first ionisation were observed which are identified as the 4s 4p ^{3 1} P ₁ and 5s5p ^{3 1} P ₁ levels in Ge I and Sn I respectively. Resonances due to excitation to these levels from thermally populatedms ² mp ^{2 3} P _{0, 1, 2} levels in the ground states have also been observed. Single configuration Hartree-Fock calculations are reported for the 4s4p ³ and 5s5p ³ configurations for Ge I and Sn I. Fano parameterisation was used to determine the Resonance wavelengths, the line widths and the asymmetry or line shape parameters.     

Synthesis and characterisation of N-1,10-phenanthrolin-5-ylalkylamides and their photosensitising heteroleptic Ru(II) complexes

In the context of our studies on ruthenium(II) complexes containing polyazaheterocyclic ligands as functionalised photosensitisers for singlet molecular oxygen generation in heterogeneous phase, we describe the synthesis and spectroscopic characterisation of different amide-functionalised N-1,10-phenanthrolin-5-ylalkylamides. These chelators are used to obtain heteroleptic [Ru(phen)₂L]²⁺ complexes, where L stands for 2-iodo-N-1,10-phenanthrolin-5-ylacetamide (5-iap), 4-oxo-4-(1,10-phenanthrolin-5-ylamino)butanoic acid (5-suap), 5-oxo-5-(1,10-phenanthrolin-5-ylamino)pentanoic acid (5-glap) and tert-butyl 4-oxo-4-(1,10-phenanthrolin-5-ylamino)butylcarbamate (BOC-5-ngap). The spectroscopic data, excited state lifetimes and quenching rate constants with O₂ (ca. 3.7×10⁹ L mol⁻¹ s⁻¹) of these novel complexes are also reported.     

Silica gel modified with lumogallion for aluminum determination by spectroscopic methods

Simple, easy to use and selective method of Al(III) sorption-spectroscopic (SS) determination was proposed. For this purpose, silica modified with tridecyloctadecylammonium chloride(SGII) using adsorption technique and glass slide modified with thin silica-poly(dimethyldiallyl-ammonium chloride) (SGI) composite film obtained by sol-gel technique were worked out. It was shown that lumogallion (LG) easily absorbs on SGI and SGII. Obtained sorbents SGIII and SGIV, respectively, were used for aluminum(III) determination by diffuse reflectance and spectrophotometric methods. The ranges of determination were (mg L⁻¹): (0.08-0.54), s_r ≤ 0.13, n = 4 for SGIII and (0.05-2.0), s_r ≤ 0.11, n = 4 for SGIV. The detection limits (blank + 3σ) for aluminum were 70 and 30 μg L⁻¹ using SGIII and SGIV, respectively, where σ is the standard deviation of blank estimation. The accuracy of the developed spectrophotometric method was examined by the determination of standard addition of aluminum in alcohol-free beverages. The relative error did not exceed 9%. SGIII can be regenerated by 0.05 M EDTANa₂H₂ solution and reused. SGIV was shown to be perspective for determination of aluminum in solution in the range of 0.01-0.13 mg L⁻¹ by solid phase luminescent technique.     

Hyperfine structure and isotope shift of some even parity levels in the YbI spectrum

Using laser induced fluorescence spectroscopy the hyperfine structure of the even parity levels 4f ¹⁴6s6d ³ D ₁, 4f ¹⁴ 6s8s ³ S ₁ and 4f ¹³ 5d6s6p (7/2, 5/2)J=1,2,3 as well as of the odd parity level 4f ¹⁴ 6s6p ³ P ₂ in neutral ytterbium has been investigated. The isotope shift of the transitions 4f ¹⁴6s6p ³ P ₀ → 4f ¹⁴ 6s6p ³ D ₁ and 4f ¹⁴ 6s6p ³ P ₂ → 4f ¹⁴ 6s8s ³ S ₁, 4f ¹³ 5d6s6p (7/2, 5/2)J=1,2,3 could be measured with high accuracy. The results for the 4f ¹⁴ 6s6p ³ D ₁ level show a considerable influence of second order effects of the hyperfine interaction. The isotope shifts of the 4f ¹⁴ 6s8s ³ S ₁ and 4f ¹³ 5d6s6p (7/2, 5/2)J=1 levels indicate a possible configuration mixing for these levels.     

Radiation-induced gaseous admixture oxidation in the droplet phase

The theoretical estimations of the possibility of gaseous admixture removal processes by radiation-induced chemical reactions in water aerosols were made. The ranges of droplet size (R) and dose rate in liquid phase (I) for admixture removal in kinetic regime were estimated. The experiments for SO₂ and NO removal by E-beam irradiation of air with aerosol droplets in a one-pass flow system have been carried out (P=1 atm, T=285–340 K). The dependencies of the impurities removal efficiencies on aerosol volume fraction (L), T and dose rates have been obtained. At R=10–100 μm, L⩾10^-4, I⩽10 kGy s^-1 the extreme removal rates for SO₂≈10³ ppm s^-1 and for NO=100–200 ppm s^-1 were achieved. For initial SO₂ content ≅1000 ppm and NO≅300 ppm the removal efficiency of 90–95% was achieved at dose 5–10 kGy and L=2−3×10^-4.     

Collisions of metastable Ne*, He* atoms with ground-state He,Ne atoms studied by atomic beam and laser techniques

A crossed nozzle-beam experiment is used to investigate thermal energy collisions: Ne*(2p ⁵3s,³ P _{0, 2})+He(1s ²,¹ S ₀), almost purely elastic, and He*(1s2s,^{1, 3} S)+Ne(2p ⁶,¹ S ₀), in which inelastic excitation transfers occur. State and velocity selection of the scattered Ne* atoms is performed using a tunablecw dye laser frequency locked on a definite Zeeman component of the transition 1s ₅→2p ₆ (λ=614.3 nm) of²⁰Ne or²²Ne. In the purely elastic case, this technique allows the selection of one of the two final velocities, and then an unambiguous LAB-CM transformation. The differential cross section at 62 meV tallies on accords with a calculation using a single effective potential. In He* on Ne collisions, the main inelastic processes are endothermic excitation transfers from He*(2¹ S). Experimental results obtained at different energies (62, 95, 109, 124 meV) show that the transfers essentially result in levels 3s and 4d of Ne.     

Lifetime measurements of the 3d 94s(1 D) 4p configuration of Cu I

The radiative lifetimes of the levels in the 3d ⁹4s(¹ D)4p configuration of Cu I are measured. The levels are excited from the metastable 3d ⁹4s ^{2 2} D _3/2,5/2 levels. The metastable Cu atoms are generated in a pulsed hollow cathode discharge. The levels investigated are populated with a 35-ps laser pulse at wavelengths around 220 nm. The laser induced fluorescence signal is detected. The lifetime of the 3d ⁹4s(³ D)4p ⁴ D _1/2 level is also determined by direct excitation from the ground state. A comparison with calculated literature values is given.     

Direct electrochemistry with enhanced electrocatalytic activity of hemoglobin in hybrid modified electrodes composed of graphene and multi-walled carbon nanotubes

A graphene (GR) and multi-walled carbon nanotubes (MWCNT) hybrid was prepared and modified on a 1-hexylpyridinium hexafluorophosphate based carbon ionic liquid electrode (CILE). Hemoglobin (Hb) was immobilized on GR-MWCNT/CILE surface with Nafion as the film forming material and the modified electrode was denoted as Nafion/Hb-GR-MWCNT/CILE. Spectroscopic results revealed that Hb molecules retained its native structure in the GR-MWCNT hybird. Electrochemical behaviors of Hb were carefully investigated by cyclic voltammetry with a pair of well-defined redox peaks obtained, which indicated that direct electron transfer of Hb was realized in the hybrid modified electrode. The result could be attributed to the synergistic effects of GR-MWCNT hybrid with enlarged surface area and improved conductivity through the formation of a three-dimensional network. Electrochemical parameters of the immobilized Hb on the electrode surface were further calculated with the results of the electron transfer number (n) as 1.03, the charge transfer coefficient (a) as 0.58 and the electron-transfer rate constant (k_s) as 0.97 s⁻¹. The Hb modified electrode showed good electrocatalytic ability toward the reduction of different substrates such as trichloroacetic acid in the concentration range from 0.05 to 38.0 mmol L⁻¹ with a detection limit of 0.0153 mmol L⁻¹ (3σ), H₂O₂ in the concentration range from 0.1 to 516.0 mmol L⁻¹ with a detection limit of 34.9 nmol/L (3σ) and NaNO₂ in the concentration range from 0.5 to 650.0 mmol L⁻¹ with a detection limit of 0.282 μmol L⁻¹ (3σ). So the proposed electrode had the potential application in the third-generation electrochemical biosensors without mediator.     

Multi-pumping flow system for the determination of dissolved orthophosphate and dissolved organic phosphorus in wastewater samples

A multi-pumping flow system (MPFS) for the spectrophotometric determination of dissolved orthophosphate and dissolved organic phosphorus in wastewater samples is proposed. The determination of orthophosphate is based on the vanadomolybdate method. In-line ultraviolet photo-oxidation is employed to mineralise organic phosphorus to orthophosphate prior to detection. A solenoid valve allows the deviation of the flow towards the UV-lamp to carry out the determination of organic phosphorus.Calibration was found to be linear up to 20 mg P L⁻¹, with a detection limit (3s_b/S) of 0.08 mg P L⁻¹, an injection throughput of 75 injections h⁻¹ and a repeatability (R.S.D.) of 0.6% for the direct determination of orthophosphate. On the other hand, calibration graphs were linear up to 40 mg P L⁻¹, with a detection limit (3s_b/S) of 0.5 mg P L⁻¹, an injection throughput of 11 injections h⁻¹ and a repeatability (R.S.D.) inferior to 2.3% for the procedures involving UV photo-oxidation.     

Anisotropy in radiative decay of Ca I in an electric field

The angular distribution of the electric-field-inducedE1 radiation is asymmetric with respect to the electric field direction as a result of mixing of states of different parity. Measurement of this anisotropy in atomic calcium permits the experimental determination of the decay rate between the¹ P and metastable¹ D levels. We obtain the resultA(4s4p ¹ P ₁ ⁰ ?5s4d ¹ D ₂)=(3.32±0.85±0.50)×10³ s^?1.     

Precision energies and hyperfine structures of the 5s5p 3 P 0,1,2 0 and 5s6s 3 S 1 levels in In II

Absolute frequencies of hyperfine components of the 230.6 nm (5s ^{2 1} S ₀?5s5p ³ P ₁ ⁰ ), 193.6 nm (5s5p ³ P ₀ ⁰ ?5s6s ³ S ₁), 197.7 nm (5s5p ³ P ₁ ⁰ ?5s6s ³ S ₁) and 207.9 nm (5s5p ³ P ₂ ⁰ ?5s6s ³ S ₁) transitions in In II emitted from a hollow-cathode source have been measured using a high-resolution, scanning échelle monochromator. The measured frequencies of these four transitions have been used to determine the energies and hyperfine interaction constants of the 5s5p ³ P ₀ ⁰ ,³ P ₁ ⁰ ,³ P ₂ ⁰ and 5s6s ³ S ₁ levels in In II. The hyperfine interaction constants for the dominant isotope¹¹⁵In are found to be: 5s5p ³ P ₁ ⁰ A=0.2322(2) cm^?1,B=?0.0159(9) cm^?1 5s5p ³ P ₂ ⁰ A=0.1699(4) cm^?1,B= 0.021 (6) cm^?1 5s6s ³ S ₁ A=0.4022(4) cm^?1,B= 0.002 (2) cm^?1. The absolute frequency of the very narrow, strongly forbidden In II 236.5 nm (5s ^{2 1} S ₀?5s5p ³ P ₀ ⁰ ) transition, which has been proposed as a candidate for a new optical frequency standard, is found to be 42275.986(7) cm^?1.     

Hyperfine structure in the configurations4f 4 6s 2 and4f 4 5d 6s of Nd I

The high resolution laser-atomic-beam technique was used to investigate the hyperfine structure in Nd I 4f ⁴6s ^{2 5} I,⁵ F,⁵ S and 4f ⁴5d6s ⁷ L,⁷ K,⁷ I,⁷ H. The metastable states were populated by an arc discharge burning in the atomic beam. The measured hyperfine constantsA andB of the levels of 4f ⁴6s ² and 4f ⁴5d6s allow a parametric analysis to be performed using the effective tensor operator formalism. The experimental radial integrals of the 4f and 5d electrons fit with those of the other lanthanides. The 4f radial integrals are in agreement with values of optimized Hartree-Fock-Slater calculations. The spectroscopic quadrupole moments of¹⁴³Nd and¹⁴⁵Nd are deduced from the 4f parameters:Q _I =?0.610(21) b and ?0.314(12) b, respectively. TheQ _I resulting from the 5d parameter are in satisfactory agreement with these values. The hyperfine anomaly due to thes electron in 4f ⁴5d 6s amounts to about 1%.     

Selective determination of cyanides by gas diffusion-stopped flow-sequential injection analysis and an on-line standard addition approach

A highly selective sequential injection (SI) method for the automated determination of weak-acid-dissociable cyanides is reported. The analytical procedure is based on the on-line reaction of the analyte with ninhydrin in carbonate medium to form a coloured product (λ_max = 510 nm). Cyanides are removed from sample matrix by acidification through a gas-diffusion step incorporated in the SI manifold. The effect of instrumental and chemical variables was studied. By adopting an on-line standard addition protocol, the sensitivity of the proposed method was enhanced drastically, without affecting the determination range. The assay was validated in terms of linearity (up to 200 μg L⁻¹), limit of detection (c_L = 2.5 μg L⁻¹), limit of quantitation (c_Q = 7.5 μg L⁻¹), precision (s_r < 2.5% at 100 μg L⁻¹) and selectivity. High tolerance against critical species such as sulfides and thiocyanates was achieved. The applicability of the method was demonstrated by analyzing tap and mineral water samples at levels below the limits established by international E.U. and U.S. organizations. The percent recoveries were satisfactory in all cases, ranging between 94.2 and 103.6%.     

Synthesis and characterization of the first diorganotin(IV) complexes containing mixed arylazobenzoic acids and having skew trapezoidal bipyramidal geometry

Three diorganotin(IV) complexes of the type, [R₂Sn(L^aH)(L^bH)] (R = ⁿBu or Me and, L^aH and L^bH are two different 5-[(E)-2-(aryl)-1-diazenyl]-2-hydroxybenzoate residues; a: aryl = 4′-Cl-(held constant) and b: aryl = 4′-Me or 4′-Br) have been prepared either by reacting ⁿBu₂SnO, L^aHH′ and L^bHH′ (1:1:1) in anhydrous toluene or by reacting Me₂SnCl₂, L^aHNa and L^bHNa (1:1:1) in anhydrous methanol. The products were characterized by microanalysis, IR, NMR (¹H, ¹³C, ¹¹⁹Sn) and ^119mSn Mössbauer spectroscopy. A full characterization of the structures of the complexes [ⁿBu₂Sn(L^aH)(L^bH)] (1 and 2) and [Me₂Sn(L^aH)(L^bH)] (3) in the solid state were accomplished by single crystal X-ray crystallography. These complexes were found to adopt the usual dicarboxylato structural type with a skew-trapezoidal bipyramidal arrangement around the tin atom.     

Stark and Zeeman spectroscopies of 4f 66s6p 7G1-6 levels in Sm I under external electric and magnetic fields

Systematic study of hyperfine structures, Zeeman and Stark effects in Sm I is performed for the lowest ⁷G_1-6 levels belonging to the configuration 4f ⁶6s6p by atomic-beam laser spectroscopy with fluorescence detection. The hyperfine coupling constants of ⁷G_2-6 levels are determined. From the Zeeman splittings for the 4f ⁶6s ^{2 7}F_2-6 ? 4f ⁶6s6p ⁷G_2-6 transitions, g-values are determined for the ⁷G_2.6 levels and the precision is improved by several orders of magnitude. From the Stark splittings for the ⁷F_0-3 ? ⁷G_1-3 transitions, tensor polarizabilities α ₂(J) are determined for the upper ⁷G_1-3 levels. Particularly for the ⁷G₁ level (15 650.55 cm^?1) which has close-lying opposite-parity level, the isotope dependence of α ₂(J) is clearly observed for the first time.     

Palladium and half sandwich ruthenium(II) complexes of selenated and tellurated benzotriazoles: Synthesis, structural aspects and catalytic applications

1-(Phenylselenomethyl)-1H-benzotriazole (L¹) and 1-(4-methoxyphenyltelluromethyl)-1H-benzotriazole (L²) have been synthesized by reacting 1-(chloromethyl)-1H-benzotriazole with in situ generated nucleophiles PhSe⁻ and ArTe⁻, respectively. The complexes of L¹ and L² with Pd(II) and Ru(II)(η⁶-p-cymene) have been synthesized. Proton, carbon-13, Se-77 and/or Te-125 NMR spectra authenticate both the ligands and their complexes. The single crystal structures of L¹, L² and [RuCl(η⁶-p-cymene)(L)][PF₆] (L = L¹: 3, L = L²: 4) have been solved. The Ru-Se and Ru-Te bond lengths have been found 2.4801(11) and 2.6183(10) Å, respectively. The palladium complexes, [PdCl₂(L)] (L = L¹: 1, L = L²: 2) have been explored for Heck and Suzuki-Miyaura C-C coupling reactions. The TON values are upto 95,000. The Ru-complexes have been found promising for catalytic oxidation of alcohols (TON ∼ 7.8-9.4 × 10⁴). The complexes of telluroether ligands are as efficient catalysts as those of selenoether ones and in fact better for catalytic oxidation.     

Influence of some reaction conditions on the obtaining of tetra- and dinuclear zinc complexes of some Schiff bases derived from 2,6-diformyl-4-alkyl-phenols

A template 2:2:4 condensation of 2,6-diformyl-4-methyl-phenol, triethylenetetramine and zinc acetate gave rise to the crystallisation of [{Zn₄(H₄L¹)(OAc)₄}{Zn(OAc)₃(H₂O)}(OAc)] · 7H₂O (1 · 7H₂O), being H₆L¹ a macrocyclic diphenolate Schiff base ligand. Changing some operation conditions, other template reactions yielded dinuclear complexes of the type Zn₂(Lⁿ)(OAc) · xH₂O, where H₃Lⁿ (n = 2, 3) are podant triphenolate Schiff base ligands derived from a 3:1 condensation of the corresponding 2,6-diformyl-4-alkyl-phenol (alkyl = Me or Bu^t, respectively) and triethylenetetramine. After recrystallisation, these two latter complexes could be X-ray characterised as Zn₂(L²)(OAc) · 1.25H₂O · 0.5MeCN (2 · 1.25H₂O · 0.5MeCN), and Zn₂(L³)(OAc) (3). Furthermore, after addition of a 3:1 molar ratio of 2-amino-4-methyl-phenol to 3, this underwent imidazolidine hydrolysis and a double imine condensation, yielding Zn₂(L⁴)(OAc)(HOAc) · 2H₂O (4 · 2H₂O), where H₃L⁴ is an acyclic pentadentate Schiff base derived from the 1:2 condensation of 2,6-diformyl-4-tert-butyl-phenol and 2-amino-4-methyl-phenol.     

Poly(methylene blue) functionalized graphene modified carbon ionic liquid electrode for the electrochemical detection of dopamine

An ionic liquid 1-butylpyridinium hexafluorophosphate based carbon ionic liquid electrode (CILE) was used as the substrate electrode and a poly(methylene blue) (PMB) functionalized graphene (GR) composite film was co-electrodeposited on CILE surface by cyclic voltammetry. The PMB–GR/CILE exhibited better electrochemical performances with higher conductivity and lower electron transfer resistance. Electrochemical behavior of dopamine (DA) was further investigated by cyclic voltammetry and a pair of well-defined redox peaks appeared with the peak-to-peak separation (ΔE_p) as 0.058 V in 0.1 mol L⁻¹ pH 6.0 phosphate buffer solution, which proved a fast quasi-reversible electron transfer process on the modified electrode. Electrochemical parameters of DA on PMB–GR/CILE were calculated with the electron transfer number as 1.83, the charge transfer coefficients as 0.70, the apparent heterogeneous electron transfer rate constant as 1.72 s⁻¹ and the diffusional coefficient (D) as 3.45 × 10⁻⁴ cm² s⁻¹, respectively. Under the optimal conditions with differential pulse voltammetric measurement, the linear relationship between the oxidation peak current of DA and its concentration was obtained in the range from 0.02 to 800.0 μmol L⁻¹ with the detection limit as 5.6 nmol L⁻¹ (3σ). The coexisting substances exhibited no interference and PMB–GR/CILE was applied to the detection of DA injection samples and human urine samples with satisfactory results.