Stereoselective, biocatalytic reductions of alpha-chloro-beta-keto esters

Eighteen known and putative reductases from baker's yeast (Saccharomyces cerevisiae) were tested for the ability to reduce a series of alpha-chloro-beta-keto esters. In nearly all cases, it was possible to produce at least two of the four possible alpha-chloro-beta-hydroxy ester diastereomers with high optical purities. The utility of this approach was demonstrated by reducing ethyl 2-chloroacetoacetate to the corresponding syn-(2R,3S)-alcohol on a multigram scale using whole cells of an Escherichia coli strain overexpressing a single yeast reductase identified from the screening studies.     

Techno-economic analysis of biocatalytic processes for production of alkene epoxides

A techno-economic analysis of two different bioprocesses was conducted, one for the conversion of propylene to propylene oxide (PO) and other for conversion of styrene to styrene epoxide (SO). The first process was a lipase-mediated chemo-enzymatic reaction, whereas the second one was a one-step enzymatic process using chloroperoxidase. The PO produced through the chemo-enzymatic process is a racemic product, whereas the latter process (based on chloroperoxidase) produces an enantio-pure product. The former process thus falls under the category of high-volume commodity chemical (PO); whereas the latter is a low-volume, high-value product (SO).A simulation of the process was conducted using the bioprocess engineering software SuperPro Designer v6.0 (Intelligen, Inc., Scotch Plains, NJ) to determine the economic feasibility of the process. The purpose of the exercise was to compare biocatalytic processes with existing chemical processes for production of alkene expoxides. The results show that further improvements are needed in improving biocatalyst stability to make these bioprocesses competitive with chemical processes.     

Optimization of a biocatalytic single-step alkene cleavage of aryl alkenes

The oxidative cleavage of a CC double bond adjacent to an aryl moiety was achieved in the presence of a protein preparation of Trametes hirsuta G FCC 047 to yield the corresponding aldehydes. Molecular oxygen was the only oxidant required. All positive substrates had a CC bond conjugated to an aromatic system, all other compounds tested not fulfilling this requirement were non-substrates. The optimum reaction conditions are 20 °C, pH 6-6.5, 15% v/v ethanol as co-solvent at an apparent oxygen pressure of 2 bar.     

Opposite stereochemical courses for enzyme-mediated alkene reductions of an enantiomeric substrate pair

Rat NADP-dependent leukotriene B4 12-hydroxydehydrogenase (Ltb4dh) catalyzes olefin reductions for some activated alkenes at the expense of NADPH in the absence of a flavin cofactor. Unlike flavoprotein alkene reductases, where net trans-addition of hydrogen has been consistently observed, Ltb4dh reduced both enantiomers of perillaldehyde to the same cis-product. To uncover the reason for this unexpected result, the stereochemical courses of perillaldehyde reductions by Ltb4dh were determined by deuterium labeling followed by (2)H NMR analysis. These data showed unequivocally that Ltb4dh mediated net trans-addition of hydrogen to (R)-perillaldehyde but followed the opposite stereochemical course (net syn-addition) for (S)-perillaldehyde. To the best of our knowledge, such divergent stereochemical pathways for a single enzyme have not previously been reported.     

High-resolution preparative-scale gel-permeation chromatography

Sharp polymer fractions have been obtained in preparative-scale gel-permeation chromatography by use of a column set packed with polystyrene gel particles of about 10 μ diameter. When 0.13 g of standard polystyrene NBS 706 was fractionated per injection, fractions with polydispersities of about 1.02–1.03 were obtained over the molecular weight range 10⁴–10⁶. Effects of a injection volume, solution concentration, and fraction volume on fractionation efficiency were also investigated. Polydispersities of fractions increased appreciably with increasing amounts of polymer injected.     

Towards biochemical filters with a sigmoidal response to pH changes: buffered biocatalytic signal transduction

We realize a biochemical filtering process by introducing a buffer in a biocatalytic signal-transduction logic system based on the function of an enzyme, esterase. The input, ethyl butyrate, is converted into butyric acid--the output signal, which in turn is measured by the drop in the pH value. The developed approach offers a versatile "network element" for increasing the complexity of biochemical information processing systems. Evaluation of an optimal regime for quality filtering is accomplished in the framework of a kinetic rate-equation model.     

The Biflow: an instrument for transfer-loop mediated, continuous, preparative-scale isoelectric trapping separations

The Biflow, a new isoelectric trapping instrument was designed to obtain a narrow DeltapI fraction from a complex feed in one step. The Biflow contains two identical separation units, each unit houses: an anode and cathode compartment, an anodic and cathodic membrane, an anodic and cathodic separation compartment, and a separation membrane. The separation units are connected to independent power supplies. The anodic membranes in Units 1 and 2 typically buffer at the same pH value and so do the cathodic membranes. The separation membranes in Units 1 and 2 buffer at different pH values, these determine the pI range (DeltapI) of the product. The cathodic separation compartments in Units 1 and 2 contain the feed and harvest streams. The two anodic separation compartments, connected through an electrically insulating air gap, form the transfer loop through which the transfer stream is recirculated between Units 1 and 2. Ampholytic components in the feed, with pI values lower than the pH of the buffering membrane in Unit 1, pass into the transfer stream and are shuttled into Unit 2. In Unit 2, components in the transfer stream which have pI values higher than the pH of the buffering membrane in Unit 2, pass into the harvest stream. This double transfer of the target component, oppositely directed, guarantees the complete exclusion of products outside the desired DeltapI range from the harvest stream. The utility of the Biflow unit was demonstrated by isolating carnosine from a mixture of UV-absorbing ampholytes and ovalbumin isoforms as well as 4.4 相似文献   

Towards organo-click reactions: development of pharmaceutical ingredients by using direct organocatalytic bio-mimetic reductions

Economic and environmentally friendly bio-mimetic one-pot three and four-component Knoevenagel-hydrogenation (K-H), five-component Knoevenagel-hydrogenation-alkylation (K-H-A) and six-component Knoevenagel-hydrogenation-alkylation-Huisgen cycloaddition (K-H-A-HC) reactions of aldehydes, CH-acids, o-phenylenediamine, alkyl halides and azides using proline, proline-metal carbonate and proline-metal carbonate-Cu(I)-catalysis, respectively have been developed. Many of K-H and K-H-A compounds have direct application in pharmaceutical chemistry.     

Evaluation of biocatalytic pathways in the synthesis of polyesters: Towards a greener production of surgical sutures

This review presents an updated and alternative perspective on enzymatic synthesis to obtain polyesters, with a focus on the precursor materials for absorbable sutures: poly-lactic, poly-glycolic, and poly-lactic-co-glycolic acids. Currently, the profitable path towards the industrial synthesis of polyesters is ring-opening polymerization (ROP) of lactones, which is an experimentally complex process and implies a hazardous environmental impact due to the need for energy consumption, use of large volumes of toxic organic solvents and of non-biocompatible metal-based catalysts. On the contrary, enzymatically driven reactions may be performed under mild conditions in simple reactors. Mechanistic and experimental issues of the two major biocatalyzed strategies -direct condensation and ROP- were analyzed from a green chemistry perspective. These enzyme-catalyzed poly-esterifications often return low yield and/or low final molecular weight (M_w). Considering all the analyzed published data available, possible strategies to overcome these limitations were postulated: implementation of aqueous biphasic reaction systems, use of ultrasound agitation and sequential addition of reactants or co-solvents. To promote M_w increment, post-reaction treatments can be carried out such as thermally induced short-chain polymerization under vacuum and incorporation of glycols as chain extenders.     

Protein separation using preparative-scale dynamic field gradient focusing

Dynamic field gradient focusing uses an electric field gradient to separate and concentrate proteins in native buffers. A prototype preparative-scale dynamic field gradient focusing apparatus reproducibly separated hemoglobin and bovine serum albumin with a mean resolution of 2.64+/-0.503. Run-to-run variations in the hemoglobin's focal point and peak width appeared to be related to fluctuations in the shape of the electric field, rather than the 5% accuracy of the pump that provided the counter-flow in the separation annulus. The variation in the electric field gradient was probably due to the formation and expansion of an ion-depleted region at the top of the separation annulus.     

Fractionation of a polymer using a preparative-scale continuous chromatograph

Summary The construction and operation of a liquid preparativescale continuous chromatograph is described. The chromatographic bed is arranged in a series of interconnected vertical columns and is rotated whilst one end of the tube bundle is closed by a stationary plate through which liquids enter and leave the bed. The problem of maintaining an efficient seal is described. The chromatograph was commissioned by continuously fractionating dextran on porous silica beads with water as eluent. Results show that as the feed concentration was increased, the fractionation obtained deviated markedly from that expected from basic GPC theory, but that the relative molecular mass distribution of the feed was still narrowed with feed concentrations of 20% w/v.     

A biocatalytic route to enantioenriched, sulfanyl aldol products

The aldol products derived from sulfur- or selenium containing acceptors were prepared by kinetic resolution in the presence of antibody 84G3 with enantiomeric excesses ranging from 56 to 70%. Much higher level of enantioselectivity was obtained (enantiomeric excesses all superior to 96%) for sulfanyl aldol products derived from thiomethoxyacetone with three different acceptors.     

A biocatalytic redox isomerisation

A bi-enzymatic cascade for the redox-isomerisation of allylic alcohol is presented. Coupling of an alcohol dehydrogenase to an enoate reductase has been successfully applied in one pot for the isomerisation of an allylic alcohol to the corresponding ketone. Critical parameters for yield and selectivity have been investigated.     

On carbene alkene complexes

It is shown that a recent claim for the intermediacy of a carbene alkene complex is unsubstantiated. An alternative mechanism is proposed.     

Towards "designer" surfaces: functionalisation of self-assembled monolayer (SAM) on colloidal gold by alkene metathesis

A variety of groups like a Fischer carbene complex, an N-hydroxysuccinimide or a ferrocene derivative have been grafted by ruthenium-catalyzed cross-metathesis reaction with terminal alkene groups on monolayer-protected gold clusters as a mild and convenient strategy to anchor functional molecules.     

Methods for direct alkene diamination, new & old

The 1,2-diamine moiety is a ubiquitous structural motif present in a wealth of natural products, including non-proteinogenic amino acids and numerous alkaloids, as well as in pharmaceutical agents, chiral ligands and organic reagents. The biological activity associated with many of these systems and their chemical utility in general has ensured that the development of methods for their preparation is of critical importance. While a wide range of strategies for the preparation of 1,2-diamines have been established, the diamination of alkenes offers a particularly direct and efficient means of accessing these systems. The purpose of this review is to provide an overview of all methods of direct alkene diamination, metal-mediated or otherwise.