Direct electrochemical determination of pyruvate in human sweat by capillary zone electrophoresis.

Capillary zone electrophoresis was employed for the determination of pyruvate in human sweat using electrochemical detection with a carbon fiber microdisk bundle electrode at a constant potential of 1.60 V vs. saturated calomel electrode. The optimum separation conditions are 3.6 x 10(-3) mol/L Na2HPO4-1.4 x 10(-3) mol/L NaH2PO4 (pH 7.2) for the buffer solution, and 18 kV for the separation voltage. The limits of detection of pyruvate are 8.0 x 10(-6) mol/L or 24 fmol (S/N = 3) for the injection voltage of 6 kV and the injection time of 10 s. The relative standard deviation is 2.0% for the migration time and 5.7% for the electrophoretic peak current. The method was applied to determining pyruvate in human sweat.     

Determination of diclofenac sodium by capillary zone electrophoresis with electrochemical detection

Capillary zone electrophoresis was employed for the determination of diclofenac sodium using an end-column amperometric detection with a carbon fiber microelectrode, at a constant potential of 0.83 V vs. saturated calomel electrode. The optimum conditions of separation and detection are 4.90 x 10(-3) mol/l Na2HPO4-3.10 x 10(-3) mol/l NaH2PO4 (pH 7.0) for the buffer solution, 10 kV for the separation voltage, 5 kV and 10 s for the injection voltage and the injection time, respectively. The limit of detection is 2.5 x 10(-6) mol/l or 5.2 fmol (S/N=2). The relative standard deviation is 0.8% for the migration time and 4.7% for the electrophoretic peak current. The method was applied to the determination of diclofenac sodium in human urine.     

Monitoring human serum transferrin by capillary zone electrophoresis with end-column amperometric detection

Capillary zone electrophoresis was employed for the determination of human serum transferrin using end-column amperometric detection with a carbon fiber microelectrode at a constant potential of 1.9 V vs. saturated calomel electrode (SCE). The optimum conditions of separation and detection are 7.5 x 10(-4) mol/L Tris-3.44 x 10(-4) mol/L HCl for the buffer solution, 20 kV for the separation voltage, 5 kV and 10 s for the injection voltage and the injection time, respectively. The limit of detection is 6.7 x 10(-8) mol/L or 440 amol (S/N = 2). The relative standard deviations are 0.67% for the migration time and 1.5% for the electrophoretic peak current. The method was applied to the determination of transferrin in human serum. The recovery is between 93-104%.     

A new method of quantification of pipemidic-acid by capillary zone electrophoresis with end-column amperometric detection

Capillary zone electrophoresis was employed for the determination of pipemidic acid using an end-column amperometric detection with a carbon fiber microdisk array electrode, at a constant potential of -1.10 V vs. saturated calomel electrode. The optimum conditions of separation and detection were 1.2 x 10(-4) mol/LNaOAc - 8.8 x 10(-4) mol/ LHOAc for the buffer solution, 20 kV for the separation voltage, 5 kV and 10 s for the injection voltage and the injection time. The limit of detection was 1.05 x 10(-7) mol/L or 189 amol (S/N=3). The relative standard deviation was 0.31% for the migration time and 2.0% for the electrophoretic peak current. The method was applied to determining pipemidic acid in human serum.     

Determination of clozapine by capillary zone electrophoresis following end-column amperometric detection with simplified capillary/electrode alignment

Capillary zone electrophoresis was employed for the determination of clozapine using an end-column amperometric detection at a carbon fiber array microdisk electrode with simplified capillary/electrode alignment. The optimum conditions of separation and detection are: Britton-Robinson buffer, pH 2.0 (1.3 x 10(-2) mol/L total concentration of acids, 3.2 x 10(-3) mol/L NaOH), 15 kV for separation voltage, 5 kV and 10 s for injection voltage and injection time, respectively. The limit of detection is 4.2 x 10(-7) mol/L or 1.2 fmole (signal to noise, S/N = 2). The relative standard deviation is 1.4% for the migration time and 2.5% for the electrophoretic peak current. The method was applied to the determination of clozapine in human blood. The recovery of the method is between 94-104%.     

Monitoring myoglobin by capillary zone electrophoresis with end-column amperometric detection

Capillary zone electrophoresis was employed for the determination of myoglobin in human urine using end-column amperometric detection with a carbon fiber microelectrode at a constant potential of 1.80 V vs. saturated calomel electrode (SCF). The optimum conditions of separation and detection are: 3.73 x 10-4 mol/L sodium diethyl malonyl urea (barbitone sodium), 1.34 x 10-4 mol/L HCl for the buffer solution, 20 kV for separation voltage, 5 kV and 5 s for injection voltage and injection time, respectively. The limit of detection is 4.4 x 10-8 mol/L or 84 amole signal to noise (S/N = 2). The relative standard deviation is 2.9% for the migration time and 2.5% for the electrophoretic peak current. The method can be used for the determination of myoglobin in human urine. The samples can be directly injected and need no pretreatment. The method is also rapid, less than 2 min, and has a recovery rate of 94-106%.     

毛细管电泳-电致化学发光法测定兔血浆中的羟考酮

基于稀土Eu(Ⅲ)掺杂的类普鲁士蓝膜修饰的铂电极为工作电极,建立了测定羟考酮的毛细管电泳-电致化学发光分析方法。考察了检测电位、运行缓冲溶液的酸度及浓度、分离电压、进样条件等对电泳分离效果及检测灵敏度的影响。在最佳的实验条件下,羟考酮可在4 min内得到分离,其ECL强度值与羟考酮的质量浓度在7.0×10-2～7.0μg/mL和7.0～70.0μg/mL范围内呈良好的线性关系,检出限为4.2×10-2μg/mL(3σ),峰高和迁移时间的相对偏差分别为3.6%和0.48%(n=6)。方法用于兔血浆中羟考酮含量的检测,加标回收率在99.7%～101.0%之间。     

Glucose in human serum determined by capillary electrophoresis with glucose micro-biosensor

A glucose micro-biosensor was employed as detector in capillary electrophoresis (CE) for determining the concentration of glucose in human serum. The micro-biosensor was based on the immobilization of the SWNTs-glucose oxidase-chitosan biocomposite at a platinized Au electrode by electrodeposition. The influencing factors including separation voltage, detection potential, pH value, and the concentration of the buffer were studied. Suitable conditions were obtained for the determination of glucose: running buffer, 25 mM PBS (pH 8.0); separation field strength, 250 V cm(-1); detection potential, 0.80 V vs. saturated calomel electrode. Under optimized detection conditions, glucose responded linearly from the range of 5 μM to 1 mM with a correlation coefficient of 0.9986 for the injection voltage of 5.0 kV and injection time of 10 s. The concentration limit of detection of the method was 1 μM (S/N = 3). The micro-biosensor exhibited good stability and durability in the analytical procedures. The relative standard deviation of the migration time and peak current were 1.7% and 2.6%, respectively. Glucose in human serum from two healthy individuals and two diabetics was successfully determined, giving a good prospect for a new clinical diagnostic instrument.     

Quantitative assay of metronidazole by capillary zone electrophoresis with amperometric detection at a gold microelectrode

Capillary zone electrophoresis was employed for the determination of metronidazole using end-column amperometric detection with a gold microelectrode at a constant potential of -0.52V vs. saturated calomel electrode. To overcome interference of oxygen in the solution, a deaeration injector and a deaeration protector at the detection cell were used. The optimum conditions of separation and detection are 1.0 x 10(-3) mol/L potassium dihydrogen citrate (KH2C6H5O7) for the buffer solution, 20 kV for the separation voltage, and 5 kV and 10 S for injection voltage and injection time, respectively. The limit of detection is 6.0 x 10(7) mol/L or 0.78 fmole (S/N = 3). The relative standard deviation is 3.9% for the electrophoretic peak current. The method was applied to the determination of metronidazole in human urine.     

在线扫集-胶束毛细管电动色谱法测定复方氨酚烷胺胶囊中的3种有效成分

以在线扫集-胶束毛细管电动色谱法(Sweeping-MEKC)测定了复方氨酚烷胺胶囊中的马来酸氯苯那敏、咖啡因和对乙酰氨基酚3种有效成分。考察了缓冲溶液pH值、SDS浓度、分离电压及进样时间等对分离效果的影响。优化条件:以未涂层熔融石英毛细管(55 cm×50μm,有效柱长35 cm)为分离柱;环境温度25℃;80 mmol/L十二烷基磺酸钠+20 mmol/L NaH2PO4(pH 2.2)+15%乙腈为缓冲体系,分离电压-20kV,进样时间60 s(H=20.0 cm),测量波长210 nm。在该条件下氯苯那敏、咖啡因和对乙酰氨基酚在25min内出峰,峰面积RSD均小于4%;线性范围分别为2.45～39.17、1.61～25.76、1.58～25.28 mg/L;检出限(S/N=3)分别达139、34、24μg/L,回收率分别为96%～101%、98%～102%、96%～102%。     

毛细管电泳-安培检测法用于7-甲基鸟苷与丝裂霉素C分离检测的研究

建立了一种同时分离检测7-甲基鸟苷与丝裂霉素C的毛细管电泳-安培检测方法。在950 mV电极(工作电极:0.3 mm微型石墨圆盘电极;参比电极:Ag/AgCl;辅助电极:Pt丝)电位下,于20 mmol/L的磷酸盐缓冲体系(pH 9.4)中,采用18 kV的分离电压进行分离。在最佳条件下,7-甲基鸟苷与丝裂霉素C在10 min内实现分离,7-甲基鸟苷与丝裂霉素C的线性范围均为0.50~50 mg/L,检测限分别为0.050 mg/L与0.025 mg/L。将该方法用于模拟尿样和模拟兔血清样的检测,7-甲基鸟苷与丝裂霉素C的回收率为93.0%～97.2%,结果令人满意。     

毛细管电泳-电致化学发光法测定土壤中的多抗霉素B

以稀土铕离子(Ⅲ)掺杂的类普鲁士蓝膜(Eu-PB)修饰铂电极为工作电极,采用毛细管电泳-电致化学发光法(CE-ECL)对土壤中的多抗霉素B进行检测.分别对毛细管电泳分离条件和电致化学发光检测条件进行优化,并探讨了体系产生电致化学发光的机理.在优化实验条件下,多抗霉素B可在4 min内得到分离,其ECL强度值与多抗霉素B...     

Analysis of amino acids by capillary zone electrophoresis with electrochemical detection

The precapillary derivatization of 20 amino acids with naphthalene-2,3-dicarboxaldehyde (NDA) and CN(-) was investigated. All these derivatized amino acids could be oxidized on the carbon fiber microdisk bundle electrode except proline. Capillary zone electrophoresis with electrochemical detection was employed for the analysis of 19 amino acids. The optimum conditions of separation and detection were borate, pH 9.48, for the electrolyte, 18 kV for the separation voltage and 1.15 V versus a saturated calomel electrode for the detection potential. Limits of detection of concentration or mass for individual amino acids were between 1.7 x 10(-7) and 1.8 x 10(-6) mol/L or 84 and 893 amol (according to the signal-to-noise ratio of 3) for the injection voltage of 6 kV and injection time of 10 s. The relative standard deviations were between 0.80 and 2.3% for the migration times and 1.4 and 6.4% for the electrophoretic peak currents. From a mixture of 19 amino acids, 10 amino acids (Arg, Lys, Orn, Try, Ser, Ala, Gly, Cys, Glu, Asp) could be well separated. The other 9 amino acids appeared on three electrophoretic peaks. From the samples, in which the nine amino acids do not exist simultaneously, some of them could also be detected. The method was applied to the determination of amino acids in beer by the standard addition method. The recovery for the amino acids in beer was 91-109%.     

Study of uptake kinetics of vincristine for human erythrocytes by capillary zone electrophoresis with electrochemical detection

Capillary zone electrophoresis (CZE) was employed for the determination of vincristine using electrochemical detection with a carbon fiber microdisk bundle electrode at a constant potential of 1.0 V versus saturated calomel electrode (SCE). The optimum conditions of separation and detection are 1.7×10⁻² Na₂HPO₄− 3.2×10⁻³ mol/l NaH₂PO₄ (pH 7.5) for the buffer solution, 20 kV for the separation voltage. The limit of detection is 5.0×10⁻⁷ mol/l or 2.2 fmol (S/N=3) for the injection voltage of 5 kV and the injection time of 10 s. The recovery of the method is between 95 and 101% for the vincristine taken by human erythrocytes. The method was applied to investigate uptake and accumulation behavior of vincristine for human erythrocytes. The advantages of the method are the small sample volume of CZE and the high selectivity and sensitivity of electrochemical detection.     

Indirect Measurement of Yoctomole Alkaline Phosphatase by Capillary Electrophoresis with Electrochemical Detection

A method for indirectly detecting yoctomole (ymol) alkaline phosphatase was developed by capillary electrophoresis with electrochemical detection. In this method, disodium phenyl phosphate was used as the enzyme substrate and the product (phenol) of its hydrolysis reaction catalyzed by alkaline phosphatase was detected at the carbon fiber electrode. The optimum conditions of detection are 1.0×10^?2 mol/L Na₂B₄O₇ (pH 9.8) for the running buffer; 1.00×10^?3 mol/L disodium phenyl phosphate for the enzyme substrate; 20.0 kV for the separation voltage; 5 kV and 10 s for the injection voltage and injection time; 1.05 V (vs. saturated calomel electrode) for the detection potential and 10 min for the incubation time, respectively. In order to enhance the ratio of signal to noise, the shape and size of the working electrode, the shape of detection end of the capillary, and the capillary/electrode alignment method were studied in detail. When a single carbon fiber microcylinder electrode of 6 μm, a capillary of 10 μm ID with the etched detection end and the in‐capillary alignment were used, a ymol mass limit of detection for alkaline phosphatase was achieved.     

Determination of active constituents in Lonicera confusa DC. by capillary electrophoresis with amperometric detection

A method based on capillary electrophoresis with amperometric detection has been developed for the determination of luteolin, chlorogenic acid, 3,5-dicaffeoylquinic acid and caffeic acid in the dried flower buds, leaves and stems (three medicinal parts) of Lonicera confusa DC., respectively. The effects of several important factors such as detection potential, the concentration of the running buffer, separation voltage and injection time were investigated to acquire the optimum conditions. The detection electrode was a 300 microm diameter carbon disc electrode at a working potential of + 0.90 V (vs saturated calomel electrode). The four analytes can be well separated within 10 min in a 40 cm-long fused silica capillary at a separation voltage of 12 kV in a 50 mM borate-25 mM phosphate buffer (pH 8.0). The relationship between peak current and analyte concentration was linear over about 3 orders of magnitude with detection limits (S/N = 3) ranging from 0.35 to 0.52 microM for all analytes. The proposed method has been successfully applied to the monitoring of bioactive constituents in the real plant samples with satisfactory assay results.     

Field-amplified sample stacking capillary electrophoresis with electrochemiluminescence applied to the determination of illicit drugs on banknotes

Capillary electrophoresis (CE) with Ru(bpy)3(2+) electrochemiluminescence (ECL) detection system was established to the determination of contamination of banknotes with controlled drugs and a high efficiency on-column field-amplified sample stacking (FASS) technique was also optimized to increase the ECL intensity. The method was illustrated using heroin and cocaine, which are two typical and popular illicit drugs. Highest sample stacking was obtained when 0.01 mM acetic acid was chosen for sample dissolution with electrokinetical injection for 6 s at 17 kV. Under the optimized conditions: ECL detection at 1.2 V, separation voltage 10.0 kV, 20 mM phosphate-acetate (pH 7.2) as running buffer, 5 mM Ru(bpy)3(2+) with 50 mM phosphate-acetate (pH 7.2) in the detection cell, the standard curves were linear in the range of 7.50x10(-8) to 1.00x10(-5) M for heroin and 2.50x10(-7) to 1.00x10(-4) M for cocaine and detection limits of 50 nM for heroin and 60 nM for cocaine were achieved (S/N = 3), respectively. Relative standard derivations of the ECL intensity and the migration time were 3.50 and 0.51% for heroin and 4.44 and 0.12% for cocaine, respectively. The developed method was successfully applied to the determination of heroin and cocaine on illicit drug contaminated banknotes without any damage of the paper currency. A baseline resolution for heroin and cocaine was achieved within 6 min.     

Rapid determination of paeoniflorin and three sugars in Radix Paeoniae Alba by capillary electrophoresis.

A method based on capillary electrophoresis with electrochemical detection has been developed for the separation and determination of paeoniflorin, sucrose, glucose, and fructose in traditional Chinese medicine, Radix Paeoniae Alba. The effects of several important factors, such as the concentration of NaOH, the separation voltage, the injection time, and the detection potential, were investigated to determine the optimum conditions. The detection electrode was a 300-microm diameter copper disc electrode at a working potential of +0.60 V (versus SCE). The four analytes can be well separated within 8 min in a 40 cm length fused-silica capillary at a separation voltage of 12 kV in a 75 mM NaOH aqueous solution. The relation between the peak current and the analyte concentration was linear over about 3 orders of magnitude with detection limits (S/N = 3) ranging from 1 to 2 microM for all analytes. The proposed method has been successfully applied for the determination of the paeoniflorin and sugars in real plant samples with satisfactory assay results.     

Determination of nitrate and nitrite in rat brain perfusates by capillary electrophoresis

A fast and simple method for the direct, simultaneous detection of nitrite (NO(2) (-)) and nitrate (NO(3) (-)) in rat striatum has been developed using a capillary electrophoresis separation of low-flow push-pull perfusion samples. The method was optimized primarily for nitrite because nitrite is more important physiologically and is found at lower levels than nitrate. We obtained a complete separation of NO(2) (-) and NO(3) (-) in rat striatum within 1.5 min. Optimal CE separations were achieved with 20 mM phosphate, 2 mM cetyltrimethylammonium chloride (CTAC) buffer at pH 3.5. The samples were injected electrokinetically for 2 s into a 40 cm x 75 microm ID fused-silica capillary. The separation voltage was 10 kV (negative polarity), and the injection voltage was 16 kV (negative polarity). UV detection was performed at 214 nm. The limits of detection obtained at a signal-to-noise ratio (S/N) of 3 for nitrite and nitrate were 0.96 and 2.86 microM. This is one of the fastest separations of nitrite and nitrate of a biological sample ever reported. Interference produced by the high physiological level of chloride is successfully minimized by use of CTAC in the run buffer.     

电堆积在线扫集胶束电动色谱法测定苦参中的生物碱

建立了电堆积在线扫集胶束电动色谱法测定苦参碱和槐定碱的新方法.考察了pH值、磷酸二氢钠浓度、CTAB浓度、电压、有机溶剂和进样时间对分离效果的影响.采用未涂层熔融石英毛细管,以20mmol/L磷酸二氢钠-0.8 mmol/L CTAB-100mmol/L Tris(含10%异丙醇,pH 8.9)为缓冲液,在进样电压-1...