新型含硅表面活性剂的合成及性能研究

含有双胺基的三硅氧烷中的伯胺基与D-葡萄糖酸-δ-内酯进行酰胺化,仲胺基与低聚乙二醇甲醚缩水甘油醚、二缩水甘油醚进行烷基化,制备了新型含硅表面活性剂Me₃SiOSiMeR¹OSiMe₃ [R¹=(CH₂)₃NR²(CH₂)₂NHCO(CHOH)₄CH₂OH; R²=H, CH₂CH(OH)CH₂O(CH₂CH₂O)_xCH₃, x=1, 2, 3] (1a, 2a～2c)和(CH₂OCH₂)_y(Me₃SiOSiMeR³OSiMe₃)₂ [R³=(CH₂)₃NR⁴～(CH₂)₂NHCO(CHOH)₄CH₂OH; R⁴=CH₂CH(OH)CH₂OCH₂, y=0, 1, 2] (3a～3c).这些化合物的结构用¹H, ¹³C核磁共振仪和元素分析仪进行鉴定.研究了这些新型含硅表面活性剂的界面性能,在浓度分别为10^-4和10^-5 mol·L^-1时可以将水的表面张力降低至约21 mN·m^-1.     

醋酸铀酰负离子气相分解反应的密度泛函理论研究

采用密度泛函理论(DFT), 选择杂化密度泛函TPSSh和TZVP基组, 对一个UO₂(CO₃)₃^4-负离子的结构进行优化, 理论计算所得结果(键长等参数)与实验数据一致. 应用TPSSh/TZVP(ECP)方法对醋酸铀酰负离子UO₂(CH₃COO)₃^-的气相分解反应进行了理论计算, 成功地解释了含+5价铀的气相自由基负离子的稳定性, 并对2个负离子(CH₃COO)UO₂CH₃^-和CH₃UO₂OH^-分别与水的复分解反应进行了理论计算, 所得数据与质谱的实验结果较好地吻合.     

乙醇在Co(111)表面脱氢反应机理的第一性原理研究

采用密度泛函理论和周期平板模型相结合的方法针对Co（111）表面上乙醇脱氢反应的反应机理进行了细致的研究,同时,对反应过程中涉及到的各个物种在表面上不同吸附位（顶位（top）,桥位（bridge）,三重空穴位（fcc和hcp））的吸附模型进行了结构优化以及相关能量的计算,确定了各物种的最佳吸附位点.研究结果表明,CH₃CH₂OH在Co（111）表面的脱氢反应可具体描述为三条反应路径：反应路径I为CH₃CH₂OH逐步脱氢经由中间体CH₃CHO,最终生成CH₄和CO的反应;反应路径Ⅱ为CH₃CH₂OH脱氢产生的CH₃CH₂O基和CH₃CHO相互作用通过CH₃COOH分子最终生成CH₄和CO₂的反应;反应路径Ⅲ为CH₃CH₂O基和CH₃CO基作用生成CH₃COOC₂H₅的过程,其中,反应路径I为最优路径（CH₃CH₂OH→CH₃CH₂O→CH₃CHO→CH₃CO→CH₃+CO→CH₂→CH→CH₄+CO+C+H）,该反应路径中的CH₃CH₂O基脱氢生成CH₃CHO为速控步骤,反应能垒为1.61 eV.     

硼化合物研究(Ⅲ)——B10H102-、B12H122-以及B3H8-阴离子的二茂铁季铵盐的合成

本文通过B_nH_n^2-(n=10,12)及B₃H₈^-盐分别与C₅H₅FeC₅H₄CH₂N(R)Me₂Cl和Fe(C₅H₄CH₂N(R)Me₂Cl)₂(R=CH₃-,C₂H₅-,n-C₃H₇-,CH₂=CH-CH₂-和CH≡C-CH₂-)在水溶液中进行反应,合成了相应的三十个新的硼烷阴离子衍生物,这些化合物对水稳定性好,B₁₀H₁₀^2-及B₁₂H₁₂^2-衍生物对热、酸、碱和氧化剂均很稳定。研究了反应物之间的用量比例对反应产物的影响。实验结果表明,不论反应物之间的克分子比如何变化,只能得到相应的一种产物(产率90-98％)。     

NMR研究溶液中正十四烷基硫酸钠/正十四烷基聚氧乙烯醚(3)表面活性剂之间的相互作用

采用¹HNMR弛豫、自扩散系数和二维相敏(2DNOESY)实验研究了正十四烷基硫酸钠[n-CH₃(CH₂)₁₃OSO₃Na(STS)]和正十四烷基聚氧乙烯醚(3)[n-CH₃(CH₂)₁₃O(C₂H₄O)₃H(C₁₄E₃)]在溶液中的自聚集以及二者混合后的相互作用.结果表明,STS与C₁₄E₃混合后存在相互作用,并形成混合胶束;弛豫实验表明,混合胶束中STS疏水链质子运动更加受阻,C₁₄E₃的α-(4″)和β-CH₂(3″)处链堆积紧密.C₁₄E₃的亲水端(CH₂CH₂0)₃链卷曲紧贴在疏水壳表面外链堆积较紧密处.自扩散系数测量表明,混合胶束比单一阴离子表面活性剂形成的胶束大.单一非离子型胶束和混合胶束的亲水端(CH₂CH₂0)₃(5″)链构成相应较软和松散的外壳.单一C₁₄E₃在极性溶剂氯仿溶液中,质子运动比在水中自由度大,但2DNOESY谱中出现了少量分子间的交叉峰,也可能形成了一些小的聚集体.     

醇-二苯甲酮光化夺氢反应活泼自由基的ESR研究

本文用自由基捕捉剂2,3,4,6-四甲基亚硝基苯(ND)及苯亚甲基叔丁基氮氧化合物(PBN)与ESR相结合的方法研究了CnH_2n+1OH(n=1,2,…8)、(CH₃)₂CH(CH₂)_nOH(n=0,1,2)、CH₂=CHCH₂OH及C₆H₅CH₂OH等十三种醇与二苯甲酮的光化夺氢反应中的活泼自由基,结果表明: 1.用ND时,二苯酮分别夺取CnH_2n+1OH、(CH₃)₂CH(CH₂)_nOH及RCH₂OH(R=CH₂=CH、C₆H₅)中α-C、叔-C及α-C上的氢,而捕捉到C_n-1H_2n-1CHOH、(CH₃)₂CH(CH₂)_nOH及RCHOH自由基。 2.用PBN时,捕捉的自由基与ND捕获的相同。     

风化壳淋积型稀土矿多级逆流浸取实验研究

风化壳淋积型稀土矿的开采主要通过浸矿剂离子与吸附在黏土矿物表面的稀土离子发生离子交换浸出反应实现。以(NH₄)₂SO₄为浸矿剂,采用多级逆流浸取的方式研究了风化壳淋积型稀土矿的浸矿过程,通过在逐级浸取过程中浸出液组分的变化分析了矿土中稀土离子(RE³⁺)和主要杂质铝离子(Al³⁺)的浸出行为,并基于浸矿剂的消耗规律探讨了浸矿剂离子与RE³⁺和Al³⁺的离子交换反应机制以及原矿土的净吸附量。结果表明,在浸矿液逐级浸取新鲜矿土的过程中,浸出液中的RE³⁺和Al³⁺浓度逐渐增加,铵根离子(NH₄⁺)逐渐消耗,交换进入浸出液中的RE³⁺和Al³⁺逐级减少;同时,浸出液中的硫酸根离子(SO₄^2-)逐级损耗,说明新鲜矿土除因发生离子交换反应消耗NH₄<...     

多反应离子的质子转移反应质谱

在无放射性辉光放电离子源内, 采用不同试剂气体进行放电, 为质子转移反应质谱(PTR-MS)新增了强度在10⁵ cps量级的3种反应离子NH₄⁺, NO⁺和O₂⁺, 纯度大于95%; 测试了这3种反应离子的离子-分子反应特征. 采用H₃O⁺, NH₄⁺, NO⁺和O₂⁺等4种反应离子对同分异构体丙醛/丙酮进行检测发现, H₃O⁺和NH₄⁺均不能区分的丙醛/丙酮可采用NO⁺或O₂⁺进行区分. 结果表明, 增加反应离子不仅使PTR-MS的可检测有机物范围不再局限于质子亲和势(PA)大于H₂O的有机物, 还提高了PTR-MS区分同分异构体的能力.     

Kishner-Wolff改良法——Ⅹ.邻芳族羟基羰基化合物的还原

研究了邻芳族羟基羰基化合物的Kishner-Wolff改良法还原,并讨论了它们的反应机制.萘酚系羰基化合物5与6中的R为H或C₆H₅(5a、6a、6b)时,还原后得高得率的正常还原物;如R为C₆H₅CH₂,C₆H₆CH₂CH₂(5b、5c、6c),则除得正常还原物外,还得含氮环化物;如R为CH₃、CH₃CH₂、CH₃CH₂CH₂、(CH₃)₂CH(5d～g),则同时得正常还原物及含氮环化物,增加R中碳原子数,似乎使正常还原物减少,而含氮环化物增加.当R为CH₃(CH₂)₆(5h),则仅得含氮环化物.苯酚系羰基化合物7中的R为烷烃基或芳族基时,均得高得率的正常还原物.     

新型三硅氧烷表面活性剂的合成与界面性能

低聚乙二醇单甲醚和环氧氯丙烷在相转移催化剂(P.T.C)存在下合成出低聚乙二醇甲醚缩水甘油醚, 然后与氨丙基三硅氧烷进行开环反应, 合成出了新型的三硅氧烷表面活性剂Me₃SiOSiMeROSiMe₃ [R＝(CH₂)₃N(CH₂CH(OH)CH₂- (OCH₂CH₂)_xOCH₃)₂, x＝1, 2]. 通过¹H NMR确证了这些目标产物的结构, 并且通过测定其水溶液的平衡表面张力研究了其表面活性. 在浓度约为10^－4 mol•L^－1时可以将水的表面张力降低至约21～22 mN•m^－1.     

Preparation, properties, and reactions of metal-containing heterocycles: Part CV. Synthesis and structure of polyoxadiphosphaplatinaferrocenophanes

A series of novel heterobimetallic crown ether-like polyoxadiphosphaplatinaferrocenophanes cis-[1,1′-Fc(CH₂O(CH₂CH₂O)_nCH₂CH₂PPh₂)₂]PtCl₂ (n=1–3) (4a–c) was synthesized in good yield by cyclization of the bis(phosphine) ligands 1,1′-Fc(CH₂O(CH₂CH₂O)_nCH₂CH₂PPh₂)₂ (n=1–3) (3a–c) and (PhCN)₂PtCl₂ under high dilution conditions in CH₂Cl₂. The bisphosphines 3a–c are obtained by reaction of the corresponding diols 1,1′-Fc(CH₂O(CH₂CH₂O)_nCH₂CH₂OH)₂ (n=1–3) (1a–c) with: (i) CH₃SO₂Cl in CH₂Cl₂ and (ii) LiPPh₂ in THF. Although the X-ray crystal structure of 4a shows that the cavity is large enough for the encapsulation of small metal cations, inclusion experiments of 4a–c with Group 1 cations, and Mg²⁺, or NH₄⁺ in solution applying NMR titration and cyclovoltammetric methods reveal no evidence for the formation of host–guest complexes for 4a,b. In the case of 4c only the addition of Na⁺ or K⁺ leads to an insignificant effect.     

Kinetic mass spectrometric determination of the absolute rate coefficient for the reaction NH3 (ν = 0) + NH3 → NH4 + NH2 at thermal kinetic energies

The absolute thermal rate coefficient for the reaction NH₃⁺ + NH₃ → NH₄⁺ + NH₂ has been determined experimentally for the first time for NH₃⁺ (ν = 0) reactant ions. An increase in E_vib results in a decrease in the rate coefficient for proton transfer.     

Third-order Optical Nonlinearities of a Series of Compounds Derived from a Keplerate Type Molybdenum-oxide-based Polyoxometalate

Abstract By reacting the unique Keplerate type molybdenum-oxide based polyoxometalate （NH4）42·[MoI320372·（CH3COO）30（H2O）y2]·ca.300H2·ca. 10CH3COONH4（1） with tetramethylammonium bromide, a new derivative （NH4）26[TMA]16{MoI32O372（H2O）72（CH3COO）30}·ca.7NH4CH3COO·ca.189H2O（2, TMA=tetramethylammonium） was prepared. Compound 2 was characterized by Fourier transform infrared spectroscopy（FTIR）, UV-Vis, elemental and thermogravimetric analyses. By the well-established Z-scan technique, investigations on the nonlinear opti- cal（NLO） properties of the series of compounds derived from the Keplerate type molybdenum-oxide-based poly- oxometalate, namely, the newly prepared compound 2, the three previously reported compounds, included compound 1, （NH4hs（TBA）24{Mo132O372（H2O）72（CH3COO）30}·ca.7NH4CH3COO·ca. 173H2O（3, TBA=tetrabutylammonium） and （DODA）40（NH4）2[（H2O）nMo132O372（CH3COO）3o（H20）72]（4, DODA=dimethyldioctadecylammonium）, reveal that the third-order nonlinearity[x（3）] values of compounds 1, 2 and 3 in the DMF/H2O solution and compound 4 in chloro- form are almost the same, which indicates that the counter cations with different length of alkyl chains show ignora- ble impacts on the NLO susceptibility. In other words, the remarkable third-order nonlinearities[x（3）≈10 19 m2/V2] mainly come from the [MoI32O372（CH3COO）30（H2O）72]42 anions. This fact reveals that the applications of the NLO active polyoxometalates in various environments（such as hydrophilic, hydrophobic, polar, apolar, etc.） can be achieved by simply varying cations to meet the demands in the design of diverse devices. Keywords Keplerate type polyoxometalate; Nonlinear optical property; Z-Scan technique; Self-defocusing; Reverse saturable absorption     

Influence of cations on the proton leakage through anion-exchange membranes

In the recovery of acids from wastewaters or the regeneration of acids and bases from salts by electromembrane processes, the most important phenomenon which limits the current efficiency is the transport of protons through the anion-exchange membrane (AEM). In this work, the proton leakage through an AEM is studied with a system containing hydrochloric acid or sulfuric acid on the cathodic side and the mixture of acid with one homoanionic salt (Li⁺, Na⁺, K⁺, Cr³⁺, NH₄⁺, (CH₃)₄N⁺ and (C₂H₅)₄N⁺) on the anodic side. The proton leakage is quantified from the value of the proton transport number. The results are analyzed assuming that the rate determining step of proton leakage is the interfacial transfer reaction of protons from the aqueous anodic solution to the membrane. The proton leakage is enhanced by the polarizing power of the cation. The transfer of protons into the membrane seems to be catalyzed by the presence of a layer of adsorbed cations on the surface of the membrane. The presence of salt decreases the proton leakage but it is always greater with H₂SO₄ solutions compared to HCl solutions.     

等离子体引发CH3OH/NH3偶联反应合成腈类化合物

腈类化合物广泛用于医药和精细化学品合成。然而,许多腈类的生产过程产生大量污染物。本文采用介质阻挡放电(DBD)等离子体活化甲醇和氨气分子,发现等离子体引发的CH₃OH/NH₃偶联反应可合成二甲基氰胺、二甲基氨基乙腈和氨基乙腈等高附加值含N有机化合物。系统研究了反应器结构、放电条件、反应条件和填充材料对甲醇转化率和产物选择性的影响。实验结果表明,在最优条件下,甲醇的转化率达到51.5%,腈类化合物选择性达到22.1%。CH₃OH/NH₃等离子体发射光谱结果表明,C≡N自由基物种可能是生成腈类化合物的重要中间体。该CH₃OH/NH₃等离子体偶联反应为二甲基氰胺、二甲基氨基乙腈和氨基乙腈提供了一种绿色合成方法,也为甲醇和氨气精细化利用开辟了一种新途径。     

SO_4~(2-)功能化处理对Fe_2O_3催化剂上氨选择性催化还原NO_x性能的促进机理研究

采用沉淀法制备了Fe(OH)_3和Fe_2O_3。通过硫酸化处理得到SO_4~(2-)/Fe(OH)_3和SO_4~(2-)/Fe_2O_3两种催化剂,并将其应用于氨选择性催化还原NO_x(NH_3-SCR)反应,研究了SO_4~(2-)功能化处理对Fe_2O_3催化剂上NH_3-SCR脱硝性能的促进机理。结果表明,与纯的Fe_2O_3相比,硫酸化处理得到的催化剂上SCR活性得到显著提升;其中,SO_4~(2-)/Fe(OH)_3表现出更加优异的催化性能,在250-450℃时NO_x转化率高于80%,且具有优异的稳定性和抗H_2O+SO_2性能。XRD、Raman、TG、FT-IR、H_2-TPR、NH_3-TPD和in situ DRIFTS等表征结果显示,硫酸功能化处理能抑制Fe_2O_3的晶粒生长,同时SO_4~(2-)与Fe~(3+)结合形成硫酸盐复合物,提高了催化剂表面酸性位点的数量和酸强度,抑制了Fe_2O_3上的氨氧化反应,从而提高了其脱硝催化性能。     

8-羟基喹啉合十钒酸盐的研究(Ⅲ)——锂、钾、铵盐的合成、鉴定与性质

在合成与研究钠盐的基础上^[1,2],我们又合成了锂、钾和铵盐,通过元素分析、分子量测定、质谱分析、X射线衍射、紫外和红外吸收光谱分析和热重分析确定了新化合物的组成与化学式并推测了化合物的结构式。     

New temperature effect on tunneling reaction in hydrogen, alkane, and ethanol in the solid phase

Rate constants for the tunneling reaction (HD + D → h + D₂) in solid HD increase steeply with increasing temperature above 5 K, while they are almost constant below 4.2 K. The apparent activation energy for the tunneling reaction above 5 K is 95 K, which is consistent with the energy (91–112 K) for vacancy formation in solid hydrogen. The results above 5 K were explained by the model that the tunneling reaction was accelerated by a local motion of hydrogen molecules and hydrogen atoms. The model of the tunneling reaction assisted by the local motion of the reactans and products was applied to the temperature dependence of the proton-transfer tunneling reaction (C₆H₆⁻ + C₂H₅OH → C₆H₇ + C₂H₅O⁻) in solid ethanol, the tunneling elimination of H₂ molecule of H₂ molecule ((CH₃)₂ CHCH(CH₃)₂⁺ → (CH₃)₂ C = C(CH₃)₂⁺ + H₂) in solid 2,3-dimethylbutane, and the selective tunneling reaction of H atoms in solid neo-C₅H₁₂-alkane mixtures.     

Stability of the silicon-ruthenium bond in the presence of a strong nucleophile. Phase sensitive H NMR COSY and crystal structure of Ru(CO)2(NH2CH2C6H5)2(Si(C6H5)(CH3)2)I

The ruthenium(II) complex Ru(CO)₂(NH₂(NH₂CH₂C₆H₅)₂(Si(C₆H₅)(CH₃)₂)I has been prepared by the reaction of Ru(CO)₄(Si(C₆H₅)(CH₃)₂)I with benzylamine. Two-dimensional homonuclear ¹H NMR experiments examine the scalar coupling of the enantiotopic amino and methylene protons of the benzylamine ligand. X-ray analysis of Ru(CO)₂(NH₂CH₂C₆H₅)₂(Si(C₆H₅)(CH₃)₂)I·1/3C₅H₁₂ (triclinic; P ; a = 14.266(4), b = 15.748(5), c = 20.082(6) Å; = 94.38(3), β = 96.30(2), γ = 101.52(2)°) indicates three crystallographically unique complexes form a clathrate with a pentane guest.     

Anionic derivatives of pentafluoro-λ-sulfanyl (fluorosulfonyl) acetic acid esters

New ester salts [R₃NH]⁺[F₅SC(SO₂F)C(O)OR′]⁻ where RH, CH₃CH₂ and R′CH₃,(CH₃)₂CH have been prepared from corresponding esters and amines. The sodiumsalt Na[F₅SC(SO₂F)C(O)OCH(CH₃)₂] was used to prepare the following -substitutedderivatives: SF₅CX(SO₂F)C(O)OCH(CH₃)₂, XBr, Cl. The crystal structure of[(C₂H₅)₃NH]⁺[F₅SC(SO₂F)C(O)OCH₃]⁻ was determined and is monoclinic: P2₁/n;a=8.758(2) Å, b=9.645(2) Å and c=19.167(4) Å; β=97.92(3)°; V=1603.6 ų; Z=4.