Chromatographic Properties for Enantiomeric Separation of Amino Acid Derivatives on the Molecularly Imprinted Monoliths

Sincetheirintroductionin 1992byFr啨ｃｈｅｔａｎｄＳｖｅｃ[1] ,monolithicsupportsasstationaryphasesinhigh performanceliquidchromatography (HPLC )andcapillaryelectrochromatography (CEC)havegainedsignificantinterestduetoanumberofu niqueproperties .Theireaseo     

原位分子印迹毛细管电色谱柱的制备及其对非对映异构体的分离

采用原位聚合的方法直接在毛细管柱中合成出辛可宁印迹聚合物。该聚合物与毛细管内壁共价结合连为一体形成整体式毛细管柱,扫描电镜显示其具有大的流通孔结构。采用压力辅助毛细管电色谱模式拆分了非对映异构体抗疟药物辛可宁和辛可尼丁,柱效远高于其在高效液相色谱分离中的柱效。考察了电压、 外压 、温度 、 流动相表观pH值和乙腈含量对分离结果的影响。通过对上述条件的优化,可以在2 min内完成辛可宁和辛可尼丁的快速分离。     

氨基酸衍生物手性分离分子印迹聚合物

本文从识别机理,制备方法及其应用等方面简要介绍了近年来用于氨基酸衍生物手性分离的分子印迹聚合物的一些研究进展.     

用离子对色谱分离氨基酸衍生物的对映体

通过在由（Ｓ）－（Ｎ）－（２萘基）丙氨酸衍生而成的“刷型”手性固定相上采用离子对色谱分离氨基酸的３,５－二硝基苯甲酰衍生物,探讨了非手性离子对试剂的浓度对溶质保留和选择性的影响。使用甲醇与磷酸盐缓冲溶液组成的溶剂为流动相,考察了甲醇含量对手性分离的影响,另外,通过在不同构型的和性固定相上做对照实验,证明在结构相同、构型相反的手性固定相上,对映体的出峰顺序是相反的。     

分子印迹手性整体柱的制备及对非对映异构体的分离

 采用原位分子印迹技术 ,单步制备了一种辛可宁印迹的手性整体柱。为了提高柱效和选择性 ,选择了相对低极性的甲苯 /十二醇复合致孔体系。在等度及梯度洗脱条件下 ,非对映异构体辛可宁与辛可尼丁被完全分离。等度洗脱中相对较宽的峰可以在梯度洗脱中得到改善。同时考察了流动相中醋酸浓度、流速以及温度对分离的影响。由于柱中存在大的流通孔 ,大大降低了分离过程中的柱压降 ,从而使这种柱能够在相对高的流速下使用。提高温度可以提高分离因子 ,在 60℃获得最大分离因子 5 40。     

Efficient Separation of Hydrophobic Molecules by Molecularly Imprinted Cyclodextrin Polymers

Cyclodextrins were cross-linked with toluene 2,4-diisocyanate in dimethyl sufoxide in the presence of hydrophobic biomolecules as templates, and the imprinted polymers were applied to the stationary phases of high performance liquid chromatography. Molecular imprinting efficiently promoted the binding-affinity and substrate-selectivity towards the template molecule, compared with the control polymers prepared in their absence. When cholesterol (template molecule) was complexed with cyclodextrins prior to the polymerization, for example, the imprinted polymer retained cholesterol more strongly than other steroids. Upon the polymerization without a template molecule, the binding towards steroids was much weaker. Besides steroids, imprinting was effective for various hydrophobic and rigid template molecules. Since binding of the guest molecule was based on inclusion complex formation with cyclodextrins, separation could be achieved in the solvents containing water. These polymeric receptors are also applicable to selective recognition of biologically important molecules or removal of toxic molecules from aqueous media. Thus, imprinting of cyclodextrins is useful for the preparation of synthetic tailor-made receptors for various kinds of hydrophobic guest molecules.     

在纤维素衍生物类手性柱上分离托品酸对映体

以乙醇-水为流动相,用纤维素-三(苯甲酯)(CTB)作为手性固定相对外消旋体托体品酸进行了高效液相色谱手性分离,考察了不同比例的乙醇-水流动相,不同流速以及用不同醇类酯对托品酸酯在手性色谱柱上的色谱行为,实验表明,流动相中水的比例,流速以及酯化所用醇类均对托品酸酯衍生物分离有很大影响,以动相为乙醇-水(95:5)流速为0.1mL/min的色谱体系,使托品酸乙酯在CTB柱上得到基线分离,对托品酸乙酯在CTB手性固定相上反相手性识别机理进行了讨论.     

分子印迹整体柱在高效液相色谱和电色谱手性分离中的应用

在常规不锈钢色谱管中以甲基丙烯酸为功能单体,采用原位聚合法制备了(5S,11S)-特罗格尔碱(S-TB)的印迹整体柱。考察了流动相中添加不同量的醋酸和水对分离的影响,结合台阶梯度洗脱模式在S-TB整体柱上实现了对TB消旋体的快速分离。另外,以碱性单体2-二甲基乙基胺甲基丙烯酸酯(DAMA)为功能单体,在毛细管中采用原位聚合法制备了毛细管分子印迹整体柱,用于在毛细管电色谱（CEC）中对消旋体1,1′-联-2-萘酚(BNL)进行手性分离。结果表明,以AMA为功能单体可以制备其他酸性模板的分子印迹聚合物,从而扩大了分子印迹聚合物MIP）在CEC分离中的应用范围。     

各种氨基酸衍生物在Chirasil—Val固定相上的气相色谱分离

本文叙述氨基酸及其对映体的全氟酰基烷基脂(O-异丙基、-异丁基、-正丁基;N(O,S)-三氟乙酰基,TFA、-七氟丁酰基,HFB)在Chirasil-Val上的洗脱特性。随烷基取代增大,保留时间增加;用HFB代替TFA,对映体的分离因子降低。此外,DL-氨基酸与另丁醇衍生,生成的对映及非对映衍生物在Chirasil-Val上可拆分成四个色谱峰。     

分子印迹整体柱快速分离烟酰胺及烟酸

以药物烟酰胺为模板分子,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,甲苯和正十二醇的混合溶液为致孔剂,采用原位聚合法制备了具有特定识别性能和分离能力的分子印迹聚合物,并将其作为高效液相色谱固定相,实现了模板分子与烟酸在2 min内的快速分离。在规格为50 mm×4.6 mm i.d.色谱柱上,以纯水为流动相（流速为7.0 mL/min）、操作温度为室温的色谱条件下,模板分子与烟酸的分离度达1.8。讨论了流动相中有机溶剂含量、醋酸及碱含量和流速对分离的影响。结果表明,原位聚合法制备的整体分子印迹聚合物在以纯水作流动相时对模板分子与其类似物有快速分离能力,这对于体内药物的分离富集研究具有很好的应用前景。     

核壳结构Boc-氨基酸分子印迹分离介质的研究

将硅胶表面硅羟基与γ-（甲基丙烯酰氧）丙基三甲氧基硅烷反应合成具有CC端基的改性硅胶核,进一步以N-Boc-L-色氨酸为模板分子,采用分子印迹技术在改性后的硅胶表面包覆印迹聚合物,制备出核壳结构氨基酸分子印迹分离介质。这种印迹分离介质对模板N-Boc-L-色氨酸具有良好的吸附性,最大饱和吸附量可达到85.96 mg/...     

HPLC法拆分粉唑醇对映体

HPLC法拆分粉唑醇对映体;粉唑醇;对映体;分离;手性固定相     

Enantiomeric Separation of N-Protected Non-Protein Amino Acid Esters by Chiral High-Performance Liquid Chromatography

Abstract

We have found that high-performance liquid chromatographic analysis of enantiomeric N-protected amino acid esters on a cellulose tris(3,5-dimethylphenylcarbamate) chiral stationary phase column (Daicel Chiralcel OD) can be utilized as one of the procedures for determining the optical purities of non-protein amino acids. The methyl esters of the N-benzyloxycarbonyl (Z) derivatives of a number of non-protein amino acids showed excellent to good enantiomeric separations using hexane - 2-propanol as a mobile phase. There was a regularity in the elution order of enantiomers: the L-isomer had a shorter retention time than the D-isomer. We have also investigated the effect of the N-protecting groups and the ester groups on the enantiomeric separation. The Z, 4-methoxybenzyloxycarbonyl (Z(OMe)), and 9-fluorenylmethoxycarbonyl (Fmoc) derivatives gave exceptionally good resolutions. By contrast, the formyl and t-butoxycarbonyl (Boc) groups impaired the enantiomeric separation. Almost all the alkyl esters examined and the benzyl ester gave resolutions better than or of the same order as the methyl ester. The resolution of β-amino acids was worse than that of the corresponding α-amino acids.     

手性拆分l-脯氨酸分子印迹聚合物的制备及其性能

以壳聚糖(CTS)为功能基体,以L-脯氨酸(L-Pro)为模板分子,采用分子印迹技术,在水溶液中合成了在空间结构和结合位点上与L-脯氨酸匹配的分子印迹聚合物(L-Pro-M IPs)。利用红外、扫描电镜和热失重分析,对相关化合物进行了表征,并对合成机理进行初步探索;通过对pH值、反应时间、交联剂用量的调节,获得最佳的反应条件为:制备壳聚糖-L-脯氨酸复合物的pH=10.7,干复合物1.0 g,交联剂8 mL,室温下反应18 h。结果表明,在水相中,L-Pro-M IPs对L-Pro具有良好的吸附选择性和高效分离特性,分离因子为4.67。     

Recognition of Sialic Acid Using Molecularly Imprinted Polymer

Abstract

The molecular imprinting technique was applied for the preparation of a polymer selective for sialic acid. To evaluate its binding ability the molecularly imprinted polymer obtained was used as a stationary phase in liquid chromatography. The polymer showed pH-dependent characteristics for binding: an optimum specificity to sialic acid at pH 8.1 and a higher affinity with group selectivity for cis-diol containing sugars at higher pH.     

戊唑醇和三唑酮对映体的手性拆分

以纤维素-三(3,5-二甲基苯基氨基甲酸酯)(CDMPC)高效液相色谱手性固定相(CSP)成功地拆分了戊唑醇和三唑酮对映异构体,通过考察流动相中异丙醇的含量、柱长及温度对手性拆分的影响,优化色谱分离条件。结果显示：该固定相对两种手性农药有较好的拆分效果,使用250mm色谱柱,流动相中含5％异丙醇时戊唑醇得到最佳分离,分离度为1．22;三唑酮在异丙醇含量为2％时有最大分离度1．47。减少异丙醇含量对两种农药均有利于增大分离度,温度升高则降低分离效果。     

Molecularly Imprinted Nanofiber Membranes from Carboxylated Polysulfone by Electrospray Deposition

It is demonstrated that polymeric materials can be directly converted into molecular (chiral) recognition nanofiber membranes by simultaneously applying an electrospray deposition and an alternative molecular imprinting during the membrane preparation process. Polysulfone with a degree of substitution of 0.88 was adopted as the candidate polymeric material for molecularly imprinted nanofiber membranes. Molecularly imprinted nanofiber membranes imprinted by Z‐D ‐Glu recognize the D ‐isomer in preference to the corresponding L ‐isomer and vice versa. The amino acid preferentially incorporated into the membrane is selectively permeated through the membrane by using a concentration gradient as a driving force for membrane transport.

     

分子印迹薄层色谱手性固定相的制备及其色谱性能

分别以右旋扁桃酸、右旋邻氯扁桃酸和右旋对氯扁桃酸为模板,丙烯酰胺、乙二醇二甲基丙烯酸酯为功能单体和交联剂合成分子印迹聚合物,并以此作为薄层色谱手性固定相。研究了模板分子消旋体在手性固定相上的分离情况,并讨论了展开剂中乙酸含量对分离的影响。在乙腈-5%乙酸展开体系中扁桃酸、邻氯扁桃酸和对氯扁桃酸消旋体得到较好的分离,分离因子分别为1.45,1.62和1.56。该手性固定相对模板分子的结构类似物也具有一定的手性交叉分离能力。讨论了分析物的化学结构对该手性固定相识别性能的影响。该方法为快速、灵敏地对手性物质分析、定性提供了一条简便的途径。     

氟西汀衍生物对映体在纤维素手性固定相上的拆分

用纤维素-三(3,5-二甲苯基氨基甲酸酯)(Chiraleel OD)手性固定相拆分了两种氟西汀衍生物对映体。使用15cm长色谱柱分离NBD-氟西汀衍生物的流动相为四氢呋喃／正己烷(25：75),分离DBD-氟西汀衍生物的流动相为四氢呋喃／正己烷(20：80);流速为1．0mL/min,荧光检测,柱温为室温。醇类改性剂作流动相甚至不能部分拆分氟西汀衍生物。实验考察了四氢呋喃含量和柱长对手性分离的影响,探讨了手性拆分氟西汀衍生物的机理。     

Separation of Different Enantiomeric Amino Acids by Capillary Array Electrophoresis

Abstract

Enantiomers of alanine, methionine, tryptophan, serine, threonine, phenylalanine, tyrosine, and glutamic acid are sampled respectively in different channel of a new capillary array electrophoresis with rotary fluorescence scanner that was built by ourselves and separation conditions for these respective enantiomers are screened with different types and concentrations of additives to the separation buffer. The experimental results indicate that 2.5 mM β‐cyclodextrin additives are preferred for the respective separation of the eight kinds of amino acids.