Study of alkyl organic monolayers with different molecular chain lengths directly attached to silicon

Alkyl organic monolayers with different alkyl molecular chain lengths directly attached to silicon were prepared at 160 degrees C from 1-decene (C10), 1-dodecene (C12), 1-tetradecene (C14), 1-hexadecene (C16), and 1-octadecene (C18). These monolayers were characterized on the basis of water contact angle measurement, ellipsometry, X-ray reflectivity (XR), X-ray photoelectron spectroscopy (XPS), and grazing incidence X-ray diffraction (GIXD) to elucidate the effect of the molecular chain length on the molecular arrangement and packing density of the monolayers. Water contact angle and XPS measurements showed that C12, C14, and C16 monolayers have a comparably higher quality, while the quality of C10 and C18 monolayers is worse. GIXD revealed that the alkyl monolayers directly attached to the Si were all amorphously structured regardless of their alkyl chain length. The amorphous structure of the alkyl monolayers could be attributed to the rigid Si-C bonding, low quality of hydrogen-terminated silicon substrate, and/or low mobility of physisorbed molecules.     

Well-defined carboxyl-terminated alkyl monolayers grafted onto H-Si(111): packing density from a combined AFM and quantitative IR study

This work demonstrates that well-defined mixed carboxyl-terminated/methyl-terminated alkyl monolayers can be prepared in one step on H-terminated Si(111) via direct photochemical hydrosilylation of undecylenic acid and 1-decene mixtures. As evidenced by AFM imaging and IR spectroscopy, a final rinse in hot acetic acid leaves the functionalized surface atomically smooth and perfectly free of physisorbed contaminants while unwanted material remains atop the monolayer with most other common solvents. The compositional surface chemistry was determined from a truly quantitative IR (ATR geometry) study in the range of 900-4000 cm(-)(1). Results prove that neither surface oxidation nor grafting through the carboxyl end groups occurs. Monolayers are fairly dense for such bulky end groups, with a total molecular surface density of approximately 2.7 10(14) cm(-)(2) corresponding to a surface coverage of 0.35 (maximum theoretical value approximately 0.5). Careful analysis of the CH- and COOH-related IR bands reveals that the composition of the grafted layers is richer in acid chains than the starting grafting mixture. A simple model is presented that shows that the grafting kinetics is about twice as fast for undecylenic acid as for 1-decene. Complementary electrochemical impedance measurements indicate the excellent electronic properties of the interface with a very low density of gap states. They also show that the acid terminal groups promote the penetration of water in the outer part of the organic film.     

Thiol-terminated monolayers on oxide-free Si: assembly of semiconductor-alkyl-S-metal junctions

Self-assembled monolayers formed by thermal hydrosilylation of a trifluoroacetyl-protected alkenylthiol on Si-H surfaces, followed by removal of the protecting groups, yield essentially oxide-free monolayers suitable for the formation of Si-C11H22-S-Hg and Si-C11H22-S-Au junctions in which the alkyl chains are chemically bound to the silicon surface (via Si-C bonds) and the metal electrode (via Hg-S or Au-S bonds). Two barriers to charge transport are present in the system: at low bias the current is temperature activated and hence limited by thermionic emission over the Schottky barrier in the silicon, whereas as at high bias transport is limited by tunneling through the organic monolayer. The thiol-terminated monolayer on oxide-free silicon provides a well-characterized system allowing a careful study of the importance of the interfacial bond to the metal electrode for current transport through saturated molecules.     

Structure and reactivity of mixed omega-carboxyalkyl/alkyl monolayers on silicon: ATR-FTIR spectroscopy and contact angle titration

The structure, reactivity, and acid-base properties of mixed monolayers prepared by photochemical reaction of hydrogen-terminated silicon with mixtures of ethyl undecylenate and n-alkenes were studied by ATR-FTIR spectroscopy and contact-angle measurements. The surface composition of the mixed monolayers and its correlation with the hydrolysis reactivity of terminal ethoxycarbonyl (ester) groups were investigated by systematically varying the mole fraction of ethyl undecylenate and the chain length of the unsubstituted alkenes in the binary deposition solution. It has been shown that the mole fraction of ester groups on the surface deviates only slightly from the mole fraction of ethyl undecylenate in the solution. The efficiency of ester hydrolysis under acidic conditions is significantly influenced by the monolayer structure, i.e., the surface density of ester groups and length of the unsubstituted alkyl chains. In addition, we find that mixed omega-alkanoic acid/alkyl monolayers on silicon (prepared via hydrolysis) exhibit well-defined contact angle titration curves from which the surface acid dissociation constants were determined. The results were compared with the acid-base properties reported in the literature for carboxylic acid-terminated alkylsiloxane monolayers on hydroxylated silicon and for omega-mercaptoalkanoic acid/alkanethiolate monolayers on gold. The weak pKa dependence (deltapKa approximately 1) on the surface density of carboxylic acid groups and on the length of unsubstituted alkyl chains is attributed to variations of the microenvironment of the acid moieties. These experimental findings provide fundamental knowledge at the molecular level for the preparation of bioreactive surfaces of controlled reactivity on crystalline semiconductor substrates.     

Thermal behavior of perfluoroalkylsiloxane monolayers on the oxidized Si(100) surface

The thermal stability of perfluoralkylsiloxane monolayers in a vacuum is investigated via X-ray photoelectron spectroscopy (XPS) for temperatures up to 600 degrees C. 1H,1H,2H,2H,-perfluorodecyltrichlorosilane (FDTS) monolayers are deposited on oxidized Si(100) surfaces from the vapor phase with various degrees of surface coverage. Significant monolayer desorption is observed to occur at temperatures below 300 degrees C regardless of the initial monolayer coverage. The desorption mechanism follows first-order kinetics and is independent of the initial coverage. Removal of FDTS is found to occur by the loss of the entire molecular chain, as evidenced by the fact that the CF(3)/CF(2) peak area ratios remain unaffected by the annealing process although CF(n)()/Si peak ratio declines with annealing. This is in sharp contrast to the behavior observed for octadecyltrichlorosilane monolayer for which elevated temperature leads to C-C bond breakage and successive shortening of the alkyl chain. It is also shown that the binding energy and the shape of the F 1s line are good indicators of the degree of disorder in the chain, as well as a measure of the interaction of the chain with the silicon surface.     

Grafting cavitands on the Si(100) surface

Cavitand molecules having double bond terminated alkyl chains and different bridging groups at the upper rim have been grafted on H-terminated Si(100) surface via photochemical hydrosilylation of the double bonds. Pure and mixed monolayers have been obtained from mesitylene solutions of either pure cavitand or cavitand/1-octene mixtures. Angle resolved high-resolution X-ray photoelectron spectroscopy has been used as the main tool for the monolayer characterization. The cavitand decorated surface consists of Si-C bonded layers with the upper rim at the top of the layer. Grafting of pure cavitands leads to not-well-packed layers, which are not able to efficiently passivate the Si(100) surface. By contrast, monolayers obtained from cavitand/1-octene mixtures consist of well-packed layers since they prevent silicon oxidation after aging. AFM measurements showed that these monolayers have a structured topography, with objects protruding from the Si(100) surface with average heights compatible with the expected ones for cavitand molecules.     

Determination of chain orientation in the monolayers of amino-acid-derived schiff base at the air-water interface using in situ infrared reflection absorption spectroscopy

The chain orientation in the monolayers of amino-acid-derived Schiff base, 4-(4-dodecyloxy)-2-hydroxybenzylideneamino)benzoic acid (DSA), at the air-water interface has been determined using infrared reflection absorption spectroscopy (IRRAS). On pure water, a condensed monolayer is formed with the long axes of Schiff base segments almost perpendicular to the water surface. In the presence of metal ions (Ca2+, Co2+, Zn2+, Ni2+, and Cu2+) in the subphase, the monolayer is expanded and the long axes of the Schiff base segments are inclined with respect to the monolayer normal depending on metal ion. The monolayer thickness, which is an important parameter for quantitative determination of orientation of hydrocarbon chains, is composed of alkyl chains and salicylideneaniline portions for the DSA monolayers. The effective thickness of the Schiff base portions is roughly estimated in the combination of the IRRAS results and surface pressure-area isotherms for computer simulation, since the only two observable p- and s-polarized reflectance-absorbance (RA) values can be obtained. The alkyl chains with almost all-trans conformations are oriented at an angle of about 10 degrees for H2O, 15 degrees for Ca2+, 30 degrees for Co2+, 35 degrees -40 degrees for Zn2+, and 35 degrees -40 degrees for Ni2+ with respect to the monolayer normal. The chain segments linked with gauche conformers in the case of Cu2+ are estimated to be 40 degrees -50 degrees away from the normal.     

石油胶质结构性质的量子化学研究

采用量子化学AM1方法对石油胶质进行了优化计算，得到石油胶质单层结构SG、双层结构DG和三层结构TG的优化构型和分子间作用能。结果表明，石油胶质的稠环芳烃和脂环部分大体为平面结构，支链部分也伸展在平面上。分子中稠环、脂环和侧链中的C—C键长均分别比单独苯环、脂肪环和烷烃的C—C键短。侧链中的C—C键比芳环和脂环的C—C键弱，在催化剂的作用下将优先裂解。重叠形成DG和TG后，键长、键角和电荷略有变化。胶质分子的极性基团间存在氢键作用，DG和TG分子间的作用能分别为－22.8416kJ/mol和－43.8455kJ/mol。双层胶质DG和三层胶质TG结构的体积较大，难以扩散到分子筛催化剂的孔道内。     

Effect of the exchange of substituent position in an amide amphiphile on the monolayer characteristics

The monolayer characteristics of two very similar amphiphiles, N-tridecyl-beta-hydroxypropionic acid amide (C13H27-NH-CO-C2H4OH; THPA) and N-(beta-hydroxyethyl)tridecanoic acid amide (C13H27-CO-NH-C2H4OH; HETA), the chemical structure of which is only changed by exchanging the position of the two substituents at the acid amide group, are compared. These small changes in the chemical structure give rise to large differences in the phase behavior of the HETA and THPA monolayers, as concluded from the differences in the surface pressure-area (pi-A) isotherms. Since both amphiphiles have the same alkyl chain length, the shift of the fluid/condensed phase transition pressure pi(c) to higher temperatures from THPA to HETA indicates a stronger polar character of the THPA headgroup. Considerable differences between the HETA and THPA monolayers also exist in the domain morphology, although, in both cases, six arms usually grow from a round center. The fractal-shaped HETA domains grow by tip splitting under the formation of numerous doubloons so that branching is considerably limited. This suggests a certain fluidity of the HETA condensed phase. The main differences of the domains result from the higher crystallinity. The starlike THPA domains have dendritic character and can form curved dendrites, which are partially two-dimensional twins due to the formation of dislocations in the two-dimensional lattice structure. In the case of HETA monolayers, the grazing incidence X-ray diffraction studies reveal a hexagonal packing of the alkyl chains oriented perpendicularly to the surface in an LS phase. In the case of THPA monolayers, an oblique lattice is formed. However, at low temperatures, a second phase transition between two condensed phases occurs that is demonstrated by an abrupt transition between two different oblique lattice structures at the surface pressure where a cusp in the pi-A isotherms occurs at T < 10 degrees C.     

Langmuir monolayers of the long-chain alkyl derivatives of a nucleoside analogue and the formation of self-assembled nanoparticles

The long-chain alkyl derivatives of a nucleoside analogue-acyclovir were prepared in the paper. One is stearyl-glycero-succinyl-acyclovir (SGSA) with a single 18-carbon length (C18) alkyl chain. Another is dioctadecyl-aspartate-succinyl-acyclovir (DASA) with double C18 alkyl chains. They were prepared by the esterification of succinyl-acyclovir with the lipids, and sodium salts of them were also prepared. Guanine moieties and alkyl moieties bring the derivatives intermolecular hydrogen bonding and hydrophobic interaction in water separately. The forces are influenced by the number of alkyl chains and the charged state, and determine the solubility and the self-assembly behavior of the derivatives. The double alkyl-chain derivatives (DASA and DASA-Na) formed rigid Langmuir monolayers on air/water surface, while the single alkyl chain derivatives (SGSA and SGSA-Na) did not. However, cholesterol (Chol) could assist SGSA to form rigid monolayers through inserting into the alkyl chains of SGSA to mimic the second alkyl chain. SGSA self-aggregates in water were prepared by the injection method with tetrahydrofuran as solvent. Cuboid-like shape and nanoscale size demonstrated that SGSA self-aggregates were self-assembled nanoparticles. Shape, particle size, zeta potential and phase transition of the nanoparticles were characterized. And they showed an average size of 83.2 nm, a negative surface charge of -31.3-mV zeta potential and a gel-liquid crystalline phase transition of 50.38 degrees C. The formation mechanism of self-assembled nanoparticles was analyzed. Hydrophobic interaction of alkyl chains improves SGSA molecules to form bilayers, and then cuboid-like nanoparticles were obtained by layer-by-layer aggregation based on inter-bilayers hydrogen bonding. However, the charged guanine moieties make SGSA-Na lose the function of hydrogen bonding so that SGSA-Na only forms vesicles in water based on hydrophobic interaction. Strong hydrophobicity and wide-open rigid double alkyl chains of DASA and DASA-Na restrict self-assembly in water media, and no homogeneous suspensions were obtained. Therefore, the molecular self-assembly behavior of the long-chain alkyl derivatives of nucleoside analogues on water surface or in water media is determined by the number of alkyl chains and the charged state.     

The role of nonsurface-active species at interfacial molecular recognition by melamine-type monolayers

The main characteristics of Langmuir monolayers are radically changed by molecular recognition of hydrogen bond nonsurface-active species. The change in the thermodynamic, phase, and structural features by molecular recognition of dissolved uracil or barbituric acid by 2,4-di(n-undecylamino)-6-amino-1,3,5-triazine (2C11H23-melamine) monolayers is characterized by combination of surface pressure studies with Brewster angle microscopy (BAM) imaging and Grazing incidence X-ray diffraction (GIXD) measurements. Phase behavior of the 2C11H23-melamine monolayer and morphology of the condensed phase domains are changed drastically, but in a specific way, by molecular recognition of uracil or barbituric acid. The main characteristics of the interfacial system can be essentially affected by the kinetics of the recognition process. Pure 2C11H23-melamine monolayers show only small compact, but nontextured domains. The monolayers of 2C11H23-melamine-uracil assemblies develop well-shaped circular condensed-phase domains having an inner texture with alkyl chains essentially oriented parallel to the periphery and having a striking tendency to two-dimensional (2D) Ostwald ripening. The 2C11H23-melamine-barbituric acid monolayers form large homogeneous areas of condensed phase that transfer at smaller areas per molecule to a homogeneous condensed monolayer. BAM imaging of corresponding assemblies with ((CH3(CH2)11O(CH2)3)2-melamine having modified alkyl chains demonstrates the specific effect of the monolayer component. GIXD results reveal that molecular recognition of pyrimidine derivatives gives rise only to quantitative changes in the two-dimensional lattice structure. The striking differences in the main characteristics between the supramolecular species are related to their different chemical structures. Quantum chemical calculations using the semiempirical PM3 method provide information about the different nature of the hydrogen-bonding-based supramolecular structures.     

Thermal Stability and Molecular Ordering of Organic Semiconductor Monolayers: Effect of an Anchor Group

The thermal stability and molecular order in monolayers of two organic semiconductors, PBI‐PA and PBI‐alkyl, based on perylene derivatives with an identical molecular structure except for an anchor group for attachment to the substrate in PBI‐PA, are reported. In situ X‐ray reflectivity measurements are used to follow the stability of these monolayers in terms of order and thickness as temperature is increased. Films have thicknesses corresponding approximately to the length of one molecule; molecules stand upright on the substrate with a defined structure. PBI‐PA monolayers have a high degree of order at room temperature and a stable film exists up to 250 °C, but decomposes rapidly above 300 °C. In contrast, stable physisorbed PBI‐alkyl monolayers only exist up to 100 °C. Above the bulk melting point at 200 °C no more order exists. The results encourage using anchor groups in monolayers for various applications as it allows enhanced stability at the interface with the substrate.     

Langmuir and grafted monolayers of photochromic amphiphilic monodendrons of low generations

Four generations of monodendrons with multiple dodecyl alkyl tails (AA-N, N representing number of alkyl tails from 1 to 8), an azobenzene spacer group, and a carboxylic acid polar head have been studied at the air-water and air-solid interface using AFM, GIXD, X-ray reflectivity, and UV-vis spectrometry. The one and two tail molecules formed orthorhombic lateral packing with long-range intramonolayer ordering. Good agreement between molecular models and thickness measurements indicated that the one and two tail molecules orient along the surface normal. The increase in the cross-sectional mismatch caused by the presence of the multiple chains for the higher generations disrupted the long-range ordering and forced the alkyl tails to adopt quasi-hexagonal structure. The higher generations (AA-4 and AA-8) formed a kinked structure with the alkyl tails oriented perpendicular to the surface with the azobenzene group tilted at a large degree toward the surface. The photoisomerization behavior in dilute solutions, at the air-water interface, and for grafted layers demonstrated that lower generation monodendrons maintained the photochromic behavior after chemical grafting to the silicon substrates, although the confinement of the molecules in monolayers significantly increased the reorganization time.     

The titration of carboxyl-terminated monolayers revisited: in situ calibrated fourier transform infrared study of well-defined monolayers on silicon

The acid-base equilibrium at the surface of well-defined mixed carboxyl-terminated/methyl-terminated monolayers grafted on silicon (111) has been investigated using in situ calibrated infrared spectroscopy (attenuated total reflectance (ATR)) in the range of 900-4000 cm (-1). Spectra of surfaces in contact with electrolytes of various pH provide a direct observation of the COOH <--> COO (-) conversion process. Quantitative analysis of the spectra shows that ionization of the carboxyl groups starts around pH 6 and extends over more than 6 pH units: approximately 85% ionization is measured at pH 11 (at higher pH, the layers become damaged). Observations are consistently accounted for by a single acid-base equilibrium and discussed in terms of change in ion solvation at the surface and electrostatic interactions between surface charges. The latter effect, which appears to be the main limitation, is qualitatively accounted for by a simple model taking into account the change in the Helmholtz potential associated with the surface charge. Furthermore, comparison of calculated curves with experimental titration curves of mixed monolayers suggests that acid and alkyl chains are segregated in the monolayer.     

Covalent attachment of organic monolayers to silicon carbide surfaces

This work presents the first alkyl monolayers covalently bound on HF-treated silicon carbide surfaces (SiC) through thermal reaction with 1-alkenes. Treatment of SiC with diluted aqueous HF solutions removes the native oxide layer (SiO2) and provides a reactive hydroxyl-covered surface. Very hydrophobic methyl-terminated surfaces (water contact angle theta = 107 degrees ) are obtained on flat SiC, whereas attachment of omega-functionalized 1-alkenes also yields well-defined functionalized surfaces. Infrared reflection absorption spectroscopy, ellipsometry, and X-ray photoelectron spectroscopy measurements are used to characterize the monolayers and show their covalent attachment. The resulting surfaces are shown to be extremely stable under harsh acidic conditions (e.g., no change in theta after 4 h in 2 M HCl at 90 degrees C), while their stability in alkaline conditions (pH = 11, 60 degrees C) also supersedes that of analogous monolayers such as those on Au, Si, and SiO2. These results are very promising for applications involving functionalized silicon carbide.     

Characterization of the adsorption of <Emphasis Type="Italic">ω</Emphasis>-(thiophene-3-yl alkyl) phosphonic acid on metal oxides with AR-XPS

The aim of the work discussed in this paper was to characterize adsorbed self-assembled monolayers on different metal oxide substrates with angle-resolved XPS measurements. The substrates used were silicon wafers (100) coated with 300 nm Al, Ta, or Ti. They were coated with acids by immersing them in an ethanol solution. The orientation of long-chain organic acids adsorbed on metal oxides has been successfully identified by angle-resolved XPS. On Al, Ta, and Ti substrates, C₁₁ chains are orientated in the right manner, i.e. with the phosphonic group at the bottom and the thiophene group on top. The orientations of the C₂ and C₆ chains are not clear. The thickness of the layers could be obtained by using Tougaard nanostructure analysis, and it shows monolayers. A model of the chemical bonds between the phosphonic group and the metal could be developed from the chemical shift. For titanium, all three P–O bonds bind to the metal substrate, whereas only the P–O(H) bond binds to the metal on aluminium and tantalum.     

Chemical, electrochemical, and structural stability of low-density self-assembled monolayers

The stability of low-density self-assembled monolayers of mercaptohexadecanoic acid on gold is studied under a variety of storage conditions--air at room temperature, argon at room temperature and 4 degrees C, and ethanol at room temperature. The structural monotony of the low-density monolayers was assessed by monitoring the alkyl chains of LDSAMs by grazing-angle Fourier transform infrared spectroscopy as a function of time. Independently of the storage conditions, both symmetric and asymmetric methylene stretches at 2923 and 2852 cm-1 decreased after 4 weeks to 2919 and 2849 cm-1, respectively. These data suggest an increased ordering of the alkyl chains that is distinctly different from that of conventional high-density monolayers of mercaptohexadecanoic acid included as a reference in this study. As a further extension of this observation, the electrochemical barrier properties of the low-density monolayers were assessed by electrochemical impedance spectroscopy and did not change significantly for any of the storage conditions over a period of 4 weeks. Moreover, X-ray photoelectron spectroscopy was used to assess the chemical changes in the low-density monolayers over time. The chemical composition was essentially unaltered for all storage conditions. Specifically, oxidation of the sulfur headgroup, a common cause of monolayer degradation, was excluded for all test conditions on the basis of XPS analysis. This study confirms excellent storage stability for low-density monolayers under commonly used storage conditions and bridges an important technological gap between these systems and conventional high-density systems.     

Single-component and mixed ferrocene-terminated alkyl monolayers covalently bound to Si(111) surfaces

Self-assembled ferrocene monolayers covalently bound to monocrystalline Si(111) surfaces have been prepared from the attachment of an amine-substituted ferrocene derivative to a pre-assembled acid-terminated alkyl monolayer using carbodiimide coupling. This derivatization strategy yielded nanometer-scale clean, densely packed monolayers, with the ferrocene units being more than 20 A from the semiconductor surface. The amount of immobilized electroactive units could be varied in the range 2 x 10(-11) to approximately 3.5 x 10(-10) mol cm(-2) by diluting the ferrocene-terminated chains by inert n-decyl chains. The highest coverage obtained for the single-component monolayer corresponded to 0.25-0.27 bound ferrocene per surface silicon atom. The electrochemical characteristics of the mixed n-decyl/ferrocene-terminated monolayers were found to not depend significantly on the surface coverage of ferrocene units. The reversible one-electron wave of the ferrocene/ferrocenium couple was observed at E degrees ' = 0.50 +/- 0.01 V vs SCE, and the rate constant of electron transfer kapp was about 50 s(-1).     

Alpha-gamma hybrid peptides that contain the conformationally constrained gabapentin residue: characterization of mimetics of chain reversals

The crystal structures of four dipeptides that contain the stereochemically constrained gamma-amino acid residue gabapentin (1-(aminomethyl)cyclohexaneacetic acid Gpn) are described. The molecular conformation of Piv-Pro-Gpn-OH (1), reveals a beta-turn mimetic conformation, stabilized by a ten atom C[bond]H...O hydrogen bond between the Piv CO group and the pro S hydrogen of the Gpn CH(2)[bond]CO group. The peptides Boc-Gly-Gpn-OH (2), Boc-Aib-Gpn-OH (3), and Boc-Aib-Gpn-OMe (4) form compact, folded structures, in which a distinct reversal of polypeptide chain direction is observed. In all cases, the Gpn residue adopts a gauche,gauche (g,g) conformation about the C(gamma)[bond]C(beta) (theta(1)) and C(beta)[bond]C(alpha) (theta(2)) bonds. Two distinct Gpn conformational families are observed. In peptides 1 and 3, the average backbone torsion angle values for the Gpn residue are phi=98 degrees, theta(1)=-62 degrees, theta(2)=-73 degrees, and psi=79 degrees, while in peptide 2 and 4 the average values are phi=-103 degrees, theta(1)=-46 degrees, theta(2)=-49 degrees, and psi=-92 degrees. In the case of 1 and 3, an intramolecular nine-membered O[bond]H...O hydrogen bond is formed between the C[double bond]O of the preceding residue and the terminal carboxylic acid OH group. All four alpha-gamma dipeptide sequences yield compact folded backbone conformations; this suggests that the Gpn residue may be employed successfully in the design of novel folded structures.     

Langmuir monolayers based on rigid wedge-shaped dendrons of benzenesulfonic acid

The structure formation of wedge-shaped monodendrons based on symmetric benzenesulfonic acid with different lengths of peripheral alkyl chains was studied in Langmuir monolayers and Langmuir–Blodgett (LB) films. A phase transition from the liquid-expanded state to the liquid-condensed state was observed on compression of the Langmuir monolayers of the dendrons containing dodecyl lateral chains. The transition is accompanied by the formation of star-shaped aggregates visualized by Brewster angle microscopy. The three-layer LB transfer results in the reorganization of the monolayer into regions of bi-, tetra-, and hexalayers on a solid substrate with a low coverage of the surface. Homogeneous liquid-condensed mono layers are formed for the dendrons with hexa- and octadecyl chains, and the film thickness achieved by the LB transfer corresponds to the monolayer alignment of the molecules with the surface coverage up to 90%. It was determined that varying the alkyl length of wedge-shaped dendrones based on symmetric benzenesulfonic acid leads to a change in phase behavior of Langmuir monolayers as well as Langmuir–Blodgett films formed by them.