Isolation of ZnO-binding 12-mer peptides and determination of their binding epitopes by NMR spectroscopy

Inorganic-binding peptides are in the focus of research fields such as materials science, nanotechnology, and biotechnology. Applications concern surface functionalization by the specific coupling to inorganic target substrates, the binding of soluble molecules for sensing applications, or biomineralization approaches for the controlled formation of inorganic materials. The specific molecular recognition of inorganic surfaces by peptides is of major importance for such applications. Zinc oxide (ZnO) is an important semiconductor material which is applied in various devices. In this study the molecular fundamentals for a ZnO-binding epitope was determined. 12-mer peptides, which specifically bind to the zinc- or/and the oxygen-terminated sides of single-crystalline ZnO (0001) and (000-1) substrates, were selected from a random peptide library using the phage display technique. For two ZnO-binding peptides the mandatory amino acid residues, which are of crucial importance for the specific binding were determined with a label-free nuclear magnetic resonance (NMR) approach. NMR spectroscopy allows the identification of pH dependent interaction sites on the atomic level of 12-mer peptides and ZnO nanoparticles. Here, ionic and polar interaction forces were determined. For the oxygen-terminated side the consensus peptide-binding sequence (HSXXH) was predicted in silico and confirmed by the NMR approach.     

From phage display to dendrimer display: insights into multivalent binding

Phage display is widely used for the selection of target-specific peptide sequences. Presentation of phage peptides on a multivalent platform can be used to (partially) restore the binding affinity. Here, we present a detailed analysis of the effects of valency, linker choice, and receptor density on binding affinity of a multivalent architecture, using streptavidin (SA) as model multivalent receptor. For surfaces with low receptor densities, the SA binding affinity of multivalent dendritic phage peptide constructs increases over 2 orders of magnitude over the monovalent species (e.g., K(d,mono) = 120 μM vs K(d,tetra) = 1 μM), consistent with previous work. However, the affinity of the SA-binding phage presenting the exact same peptides was 16 pM when dense receptor surfaces used for initial phage display were used in assays. The phage affinity for SA-coated surfaces weakens severely toward the nanomolar regime when surface density of SA is decreased. A similarly strong dependence in this respect was observed for dendritic phage analogues. When presented with a dense SA-coated surface, dendrimer display affords up to a 10(4)-fold gain in affinity over the monovalent peptide. The interplay between ligand valency and receptor density is a fundamental aspect of multivalent targeting strategies in biological systems. The perspective offered here suggests that in vivo targeting schemes might best be served to conduct ligand selection under physiologically relevant receptor density surfaces, either by controlling the receptor density placed at the selection surface or by using more biologically relevant intact cells and tissues.     

Chemistry of aqueous silica nanoparticle surfaces and the mechanism of selective peptide adsorption

Control over selective recognition of biomolecules on inorganic nanoparticles is a major challenge for the synthesis of new catalysts, functional carriers for therapeutics, and assembly of renewable biobased materials. We found low sequence similarity among sequences of peptides strongly attracted to amorphous silica nanoparticles of various size (15-450 nm) using combinatorial phage display methods. Characterization of the surface by acid base titrations and zeta potential measurements revealed that the acidity of the silica particles increased with larger particle size, corresponding to between 5% and 20% ionization of silanol groups at pH 7. The wide range of surface ionization results in the attraction of increasingly basic peptides to increasingly acidic nanoparticles, along with major changes in the aqueous interfacial layer as seen in molecular dynamics simulation. We identified the mechanism of peptide adsorption using binding assays, zeta potential measurements, IR spectra, and molecular simulations of the purified peptides (without phage) in contact with uniformly sized silica particles. Positively charged peptides are strongly attracted to anionic silica surfaces by ion pairing of protonated N-termini, Lys side chains, and Arg side chains with negatively charged siloxide groups. Further, attraction of the peptides to the surface involves hydrogen bonds between polar groups in the peptide with silanol and siloxide groups on the silica surface, as well as ion-dipole, dipole-dipole, and van-der-Waals interactions. Electrostatic attraction between peptides and particle surfaces is supported by neutralization of zeta potentials, an inverse correlation between the required peptide concentration for measurable adsorption and the peptide pI, and proximity of cationic groups to the surface in the computation. The importance of hydrogen bonds and polar interactions is supported by adsorption of noncationic peptides containing Ser, His, and Asp residues, including the formation of multilayers. We also demonstrate tuning of interfacial interactions using mutant peptides with an excellent correlation between adsorption measurements, zeta potentials, computed adsorption energies, and the proposed binding mechanism. Follow-on questions about the relation between peptide adsorption on silica nanoparticles and mineralization of silica from peptide-stabilized precursors are raised.     

Adsorption behavior of linear and cyclic genetically engineered platinum binding peptides

Recently, phage and cell-surface display libraries have been adapted for genetically selecting short peptides for a variety of inorganic materials. Despite the enormous number of inorganic-binding peptides reported and their bionanotechnological utility as synthesizers and molecular linkers, there is still a limited understanding of molecular mechanisms of peptide recognition of and binding to solid materials. As part of our goal of genetically designing these peptides, understanding the binding kinetics and thermodynamics, and using the peptides as molecular erectors, in this report we discuss molecular structural constraints imposed upon the quantitative binding characteristics of peptides with an affinity for inorganics. Specifically, we use a high-affinity seven amino acid Pt-binding sequence, PTSTGQA, as we reported in earlier studies and build two constructs: one is a Cys-Cys constrained "loop" sequence (CPTSTGQAC) that mimics the domain used in the pIII tail sequence of the phage library construction, and the second is the linear form, a septapeptide, without the loop. Both sequences were analyzed for their adsorption behavior on Pt thin films by surface plasmon resonance (SPR) spectroscopy and for their conformational properties by circular dichroism (CD). We find that the cyclic peptide of the integral Pt-binding sequence possesses single or 1:1 Langmuir adsorption behavior and displays equilibrium and adsorption rate constants that are significantly larger than those obtained for the linear form. Conversely, the linear form exhibits biexponential Langmuir isotherm behavior with slower and weaker binding. Furthermore, the structure of the cyclic version was found to adopt a random coil molecular conformation, whereas the linear version adopts a polyproline type II conformation in equilibrium with the random coil. The 2,2,2-trifluoroethanol titration experiments indicate that TFE has a different effect on the secondary structures of the linear and cyclic versions of the Pt binding sequence. We conclude that the presence of the Cys-Cys restraint affects both the conformation and binding behavior of the integral Pt-binding septapeptide sequence and that the presence or absence of constraints could be used to tune the adsorption and structural features of inorganic binding peptide sequences.     

Design criteria for engineering inorganic material-specific peptides

Development of a fundamental understanding of how peptides specifically interact with inorganic material surfaces is crucial to furthering many applications in the field of nanobiotechnology. Herein, we report systematic study of peptide sequence-activity relationships for binding to II-VI semiconductors (CdS, CdSe, ZnS, ZnSe) and Au using a yeast surface display system, and we define criteria for tuning peptide affinity and specificity for these material surfaces. First, homohexapeptides of the 20 naturally occurring amino acids were engineered, expressed on yeast surface, and assayed for the ability to bind each material surface in order to define functional groups sufficient for binding. Histidine (H6) was able to mediate binding of yeast to the five materials studied, while tryptophan (W6), cysteine (C6), and methionine (M6) exhibited different levels of binding to single-crystalline ZnS and ZnSe and polycrystalline Au surfaces. The ability of neighboring amino acids to up- and down-modulate histidine binding was then evaluated by use of interdigitated peptides (XHXHXHX). While the 20 amino acids exhibited a unique fingerprint of modulation for each material, some general trends emerged. With neutral defined by alanine, up-modulation occurred with glycine, basic amino acids, and the previously defined binding amino acids histidine, tryptophan, cysteine, and methionine, and down-modulation generally occurred with acidic, polar, and hydrophobic residues. We conclude that certain amino acids directly bind the material surface while neighboring amino acids locally modulate the binding environment for the materials we studied. Therefore, by the specific placement of up- and down-modulating amino acids, material specificity can be controlled. Finally, by employing the compositional and spatial criteria developed herein, it was possible to predictively design peptide sequences with material specificity, including a multimaterial binder, a Au-specific binder, and a ZnS-specific binder, that were verified as such in the context of yeast display.     

Specificity and biomineralization activities of Ti-binding peptide-1 (TBP-1)

Numerous peptide aptamers that recognize inorganic materials have been isolated using in vitro peptide evolution systems. However, it remains unknown how peptides interact with inorganic materials or how specific those interactions are. We, therefore, assessed the target specificities of the peptide aptamer TBP-1 (RKLPDAPGMHTW) by monitoring its ability to bind 10 different metals. We found that phages displaying TBP-1 bound to Ti, Si, and Ag surfaces but not to Au, Cr, Pt, Sn, Zn, Cu, or Fe. As previously seen with Ti, binding to Si and Ag was diminished by R1A, P4A, or D5A mutation, suggesting that the same molecular mechanism underlies TBP-1 binding to all three materials. We also observed that a synthetic TBP-1 peptide mediated mineralization of both silica and Ag. It, thus, appears that although the overall chemical characteristics of Ti, Si, and Ag surfaces are dissimilar, they share a common subnanometric structure that is recognized by TBP-1.     

Biological identification of peptides that specifically bind to poly(phenylene vinylene) surfaces: recognition of the branched or linear structure of the conjugated polymer

Peptides that bind to poly(phenylene vinylene) (PPV) were identified by the phage display method. Aromatic amino acids were enriched in these peptide sequences, suggesting that a π-π interaction is the key interaction between the peptides and PPV. The surface plasmon resonance (SPR) experiments using chemically synthesized peptides demonstrated that the Hyp01 peptide, with the sequence His-Thr-Asp-Trp-Arg-Leu-Gly-Thr-Trp-His-His-Ser, showed an affinity constant (7.7 × 10(5) M(-1)) for the target, hyperbranched PPV (hypPPV) film. This value is 15-fold greater than its affinity for linear PPV (linPPV). In contrast, the peptide screened for linPPV (Lin01) showed the reverse specificity for linPPV. These results suggested that the Hyp01 and Lin01 peptides selectively recognized the linear or branched structure of PPVs. The Ala-scanning experiment, circular dichroism (CD) spectrometry, and molecular modeling of the Hyp01 peptide indicated that adequate location of two Trp residues by forming the polyproline type II (P(II)) helical conformation allowed the peptide to specifically interact with hypPPV.     

Design of peptide that recognizes double-stranded DNA.

A novel molecular tool for double-stranded (ds) DNA detection using synthetic peptide is described. The peptide was designed based on the DNA binding domain of the lambda phage CRO repressor (CRO). The designed peptides contain helix-turn-helix (HTH), which is DNA binding motif. A cyclic peptide and a mutant peptide based on CRO were also designed, and the resulting affinity for dsDNA was increased. Furthermore, native amino acids of the peptide were replaced with arginine to increase the affinity for dsDNA. The affinity of these peptides for DNA binding was assessed by surface plasmon resonance (SPR) technique.     

Identifying substrates for endothelium-specific Tie-2 receptor tyrosine kinase from phage-displayed peptide libraries for high throughput screening

The peptide substrate specificity of Tie-2 was probed using the phage display method in order to identify efficient substrate for high throughput screening. Two random peptide libraries, pGWX3YX4 and pGWX4YX4, were constructed, in which all twenty amino acid residues were represented at the X positions flanking the fixed tyrosine residue Y. A fusion protein of GST and the catalytic domain of human Tie-2 was used to perform the phage phosphorylation. The phosphorylated phage particles were enriched by panning over immobilized anti-phosphotyrosine antibody pY20 for a total of 5 rounds. Four phage clones (3T61, 3T68, C1-90 and D1-15) that express a peptide sequence that can be phosphorylated by the recombinant catalytic domain of human Tie-2 were identified. Synthetic peptides made according to the sequences of the 4 selected clones from the two libraries, which had widely different sequences, were active substrates of Tie-2. Kinetic analysis revealed that D1-15 had the best catalytic efficiency with a k(cat)/K(m) of 5.9x10(4) M(-1) s(-1). Three high throughput screening assay formats, dissociation-enhanced lanthanide fluoroimmunoassay (DELFIA), radioactive plate binding (RPB) and time-resolved fluorescent resonance energy transfer (TR-FRET) were developed to assess the suitability of these phage display selected peptides in screening Tie-2 inhibitors. Three out of four peptides were functional in the DELFIA assay and D1-15 was functional in the TR-FRET assay.     

Prediction of calcite morphology from computational and experimental studies of mutations of a de novo-designed peptide

Many organisms use macromolecules, often proteins or peptides, to control the growth of inorganic crystals into complex materials. The ability to model peptide-mineral interactions accurately could allow for the design of novel peptides to produce materials with desired properties. Here, we tested a computational algorithm developed to predict the structure of peptides on mineral surfaces. Using this algorithm, we analyzed energetic and structural differences between a 16-residue peptide (bap4) designed to interact with a calcite growth plane and single- and double-point mutations of the charged residues. Currently, no experimental method is available to resolve the structures of proteins on solid surfaces, which precludes benchmarking for computational models. Therefore, to test the models, we chemically synthesized each peptide and analyzed its effects on calcite crystal growth. Whereas bap4 affected the crystal growth by producing heavily stepped corners and edges, point mutants had variable influences on morphology. Calculated residue-specific binding energies correlated with experimental observations; point mutations of residues predicted to be crucial to surface interactions produced morphologies most similar to unmodified calcite. These results suggest that peptide conformation plays a role in mineral interactions and that the computational model supplies valid energetic and structural data that can provide information about expected crystal morphology.     

Phage-Display Based Discovery and Characterization of Peptide Ligands against WDR5

WD40 is a ubiquitous domain presented in at least 361 human proteins and acts as scaffold to form protein complexes. Among them, WDR5 protein is an important mediator in several protein complexes to exert its functions in histone modification and chromatin remodeling. Therefore, it was considered as a promising epigenetic target involving in anti-cancer drug development. In view of the protein–protein interaction nature of WDR5, we initialized a campaign to discover new peptide-mimic inhibitors of WDR5. In current study, we utilized the phage display technique and screened with a disulfide-based cyclic peptide phage library. Five rounds of biopanning were performed and isolated clones were sequenced. By analyzing the sequences, total five peptides were synthesized for binding assay. The four peptides are shown to have the moderate binding affinity. Finally, the detailed binding interactions were revealed by solving a WDR5-peptide cocrystal structure.     

Assembly kinetics of nanocrystals via peptide hybridization

The assembly kinetics of colloidal semiconductor quantum dots (QDs) on solid inorganic surfaces is of fundamental importance for implementation of their solid-state devices. Herein an inorganic binding peptide, silica binding QBP1, was utilized for the self-assembly of nanocrystal quantum dots on silica surface as a smart molecular linker. The QD binding kinetics was studied comparatively in three different cases: first, QD adsorption with no functionalization of substrate or QD surface; second, QD adsorption on QBP1-modified surface; and, finally, adsorption of QBP1-functionalized QD on silica surface. The surface modification of QDs with QBP1 enabled 79.3-fold enhancement in QD binding affinity, while modification of a silica surface with QBP1 led to only 3.3-fold enhancement. The fluorescence microscopy images also supported a coherent assembly with correspondingly increased binding affinity. Decoration of QDs with inorganic peptides was shown to increase the amount of surface-bound QDs dramatically compared to the conventional methods. These results offer new opportunities for the assembly of QDs on solid surfaces for future device applications.     

Biological properties of opioid peptides replacing Tyr at position 1 by 2,6-dimethyl-Tyr.

To understand the effect of the replacement of Tyr residue at position 1 in opioid peptides by 2,6-dimethyl-Tyr (Dmt) on the biological property, chiral (D or L) Dmt1 analogs of Leu-enkephalin (Enk) and Tyr-D-Arg-Phe-beta Ala-NH2 (YRFB) were synthesized and their enzymatic stabilities, in vitro bioactivities and receptor binding affinities compared with those of parent peptides. [L-Dmt1]Enk (1) exhibited 4-fold higher stability against aminopeptidase-M and possessed dramatically increased activities in guinea pig ilium (GPI) (187-fold) and mouse vas deferens (MVD) (131-fold) assays, and in rat brain receptor binding assays (356-fold at mu receptor and 46-fold at delta receptor) as compared to Enk. [L-Dmt1]YRFB (3) also exhibited increased activities in GPI (46-fold) and MVD (177-fold) assays, and in the binding assays (69-fold at mu receptro and 341-fold at delta receptor) as compared to the parent peptide. [D-Dmt1]Enk (2) and [D-Dmt1]YRFB (4) exhibited activities with diminished or lesser potency than the parent peptide in all assays. These results indicate that there is a tendency for mu affinity to be enhanced more than delta affinity with introduction of L-Dmt into delta ligand peptide (Enk), and for delta affinity to be enhanced more than mu affinity in case of mu ligand peptide (YRFB), resulting in reduced receptor selectivities at the receptors.     

Computational analysis on the binding of epitope peptide to human leukocyte antigen class I molecule A*2402 subtype

Immunological response induced by small amino peptide has attracted much recent attention in the field of immunotherapy. Wilms' tumor (WT1) protein is one of the potent tumor antigens inducing immunological response in mouse and human, because WT1 is over expressed in many types of leukemia and various kinds of solid tumors. A 9-mer peptide encoded in WT1 protein (CMTWNQMNL; amino acid 235-243) is known to serve as antigenic peptide for human leukocyte antigen (HLA)-A*2402 molecule. It was reported that the replacement of the second amino residue, which is deeply responsible for the peptide binding to HLA, induced strong immunological response compared to the natural peptide. In this study, 19 kinds of single amino substitutions were introduced at position 2 of this 9-mer WT1 peptide. We performed molecular dynamics simulation on the complex of each of WT1 epitope peptides and HLA-β2 micro globulin (β2m) molecule, and subsequently estimated the binding affinity using molecular mechanics/generalized-Born surface area method combined with normal mode analysis. Our computation indicated that the peptide containing M2Y or M2W mutation showed high binding affinity to the HLA-β2m molecule as well as the natural peptide. We have also examined the role of the residue at position 2 in peptide binding to HLA-β2m. The calculation showed that van der Waals interaction between the side chain of the residue at position 2 and hydrophobic residues inside B-pocket of HLA are important. These findings will be helpful to search other potent peptides that will enhance strong immunological response specific to HLA-A*2402 molecule.     

Preferential binding of peptides to graphene edges and planes

Peptides identified from combinatorial peptide libraries have been shown to bind to a variety of abiotic surfaces. Biotic-abiotic interactions can be exploited to create hybrid materials with interesting electronic, optical, or catalytic properties. Here we show that peptides identified from a combinatorial phage display peptide library assemble preferentially to the edge or planar surface of graphene and can affect the electronic properties of graphene. Molecular dynamics simulations and experiments provide insight into the mechanism of peptide binding to the graphene edge.     

Use of intein-directed peptide biosynthesis to improve serum stability and bioactivity of a gelatinase inhibitory peptide

Screening of phage display libraries allows rapid identification of peptides binding to a target. However, functional analysis of the phage sequences and their reproduction as soluble and stable peptides are often the most time-consuming part in the screening. We have used here intein-based peptide biosynthesis to produce a phage-display derived gelatinase inhibitory peptide CTTHWGFTLC and to identify the critical residues for gelatinase inhibitory activity by performing alanine-scanning mutagenesis. By biosynthetic incorporation of 5-fluorotryptophan, we obtained an inhibitor of MMP-2 and MMP-9 gelatinases that showed a 6-fold enhancement in serum stability in comparison to the wild-type peptide. The new peptide also had an improved ability to inhibit tumor cell migration. These studies indicate the utility of intein methodology for synthesis and design of peptides obtained by phage display.     

Tuning the Binding Affinity and Selectivity of Perfluoroaryl-Stapled Peptides by Cysteine-Editing

A growing number of approaches to “staple” α-helical peptides into a bioactive conformation using cysteine cross-linking are emerging. Here, the replacement of l -cysteine with “cysteine analogues” in combinations of different stereochemistry, side chain length and beta-carbon substitution, is explored to examine the influence that the thiol-containing residue(s) has on target protein binding affinity in a well-explored model system, p53–MDM2/MDMX, which is constituted by the interaction of the tumour suppressor protein p53 and proteins MDM2 and MDMX, which regulate p53 activity. In some cases, replacement of one or more l -cysteine residues afforded significant changes in the measured binding affinity and target selectivity of the peptide. Computationally constructed homology models indicate that some modifications, such as incorporating two d -cysteine residues, favourably alter the positions of key functional amino acid side chains, which is likely to cause changes in binding affinity, in agreement with measured surface plasmon resonance data.     

Rational design of affinity peptide ligand by flexible docking simulation

Rational design of affinity peptide ligands of proteins by flexible docking simulation is performed using the SYBYL program package. This approach involves the use of experimental data to verify a scoring function that can be used to assess the affinity of a peptide for its target protein. The enzyme-linked immunosorbent assay (ELISA) data of several peptides displayed on phage surfaces for insulin and lysozyme, respectively, reported in literature are used for the purpose. It is found that the absolute values of the Dscore calculated from the docking correspond well to the ELISA data that relate to the affinity between the peptides and the target molecule. So, the Dscore function is used to assess the affinity of docked peptides in a pentapeptide library designed on the basis of protein (alpha-amylase) structure. As a result, a pentapeptide with a high Dscore value is selected and a hexapeptide (FHENWS) is built by linking serine to its C-terminal to lengthen the peptide. Molecular surface analysis with the MOLCAD program reveals that electrostatic interactions (including hydrogen bonds) and Van der Waals forces contribute to the affinity of the hexapeptide for alpha-amylase. Chromatographic experiments with the immobilized peptide have given further evidence for this observation. Adsorption isotherm described by the Langmuir equation indicates that the apparent binding constant of alpha-amylase to the immobilized hexapeptide was 2.5x10(5)L/mol. Finally, high affinity and specificity of the affinity adsorbent is exemplified by the purification of alpha-amylase from crude fermentation broth of Bacillus subtilis.     

影响多肽与花粉钙调素亲和性的因素──多肽的圆二色性及核磁共振研究

钙调素 ( Ca M)存在于所有真核细胞生物体内 ,它可与很多天然的生物活性肽结合 ,如 β-内啡肽、胰高血糖素和某些昆虫毒液肽等 [1] .有关 Ca M与多肽相互作用的研究普遍认为 ,对 Ca M有高亲和性的多肽应该具有形成α螺旋结构的显著倾向[2 ] .为进一步确认多肽的主链构象对 Ca M亲和能力的影响 ,我们采用圆二色性光谱和核磁共振波谱分析了荞麦花粉碱性十二肽 BPP-1和它的类似物 BPP-3的结构特征 ,配合多肽对花粉钙调素 ( p Ca M)的结合能力 ,发现肽链的可塑性和 C端的极性是影响多肽与 p Ca M亲和能力的因素 ,而形成 α螺旋结构的倾…     

alpha(2A)-adrenergic receptor derived peptide adsorbates: a G-protein interaction study

The affinity of alpha(2A)-adrenergic receptor (alpha(2A)-AR) derived peptide adsorbates for the functional bovine brain G-protein is studied in the search for the minimum sequence recognition. Three short peptides (GPR-i2c, GPR-i3n, and GPR-i3c) are designed to mimic the second and third intracellular loops of the receptor. X-ray photoelectron spectroscopy is used to study the chemical composition of the peptides and the binding strength to the surfaces. Chemisorption of the peptides to the gold substrates is observed. Infrared spectroscopy is used to study the characteristic absorption bands of the peptides. The presence of peptides on the surfaces is verified by prominent amide I and amide II bands. The interaction between the peptides and the G-protein is studied with surface plasmon resonance. It is shown that GPR-i3n has the highest affinity for the G-protein. Equilibrium analysis of the binding shows that the G-protein keeps its native conformation when interacting with GPR-i3c, but during the interaction with GPR-i2c and GPR-i3n the conformation of G-protein is changed, leading to the formation of aggregates and/or multilayers.