FTIR, FT-Raman spectra and ab initio DFT vibrational analysis of 2,4-dichloro-6-nitrophenol

The FTIR and FT-Raman spectra of 2,4-dichloro-6-nitrophenol (2,4-DC6NP) has been recorded in the region 4000-400 cm(-1) and 3500-100 cm(-1), respectively. The optimized geometry, frequency and intensity of the vibrational bands of (2,4-DC6NP) were obtained by the ab initio and DFT levels of theory with complete relaxation in the potential energy surface using 6-31G(d,p) and 6-311+G(d,p) basis sets. The harmonic vibrational frequencies were calculated and the scaled values have been compared with experimental FTIR and FT-Raman spectra. The observed and the calculated frequencies are found to be in good agreement. The experimental spectra also coincide satisfactorily with those of theoretically constructed bar type spectrograms.     

Molecular structure, IR spectra of 2-mercaptobenzothiazole and 2-mercaptobenzoxazole by density functional theory and ab initio Hartree–Fock calculations

Quantum chemistry calculations have been performed using Gaussian03 program to compute optimized geometry, harmonic vibrational frequency along with intensities in IR and Raman spectra and atomic charges at RHF/6-31+G*, B3LYP/6-31+G* and B3LYP/6-31++G* levels for 2-mercaptobenzothiazole (MBT, C₇H₅NS₂) and 2-mercaptobenzoxazole (MBO, C₇H₅NOS) in the ground state. The scaled harmonic vibrational frequencies have been compared with experimental FT-IR and FT-Raman spectra. The results show that the scaled theoretical vibrational frequencies is very good agreement with the experimental values. A detailed interpretation of the infrared and Raman spectra of 2-mercaptobenzothiazole and 2-mercaptobenzoxazole was reported. Comparison of calculated spectra with the experimental spectra provides important information about the ability of the computational method to describe the vibrational modes.     

FT-IR, NIR-FT-Raman and gas phase infrared spectra of 3-aminoacetophenone by density functional theory and ab initio Hartree-Fock calculations

The gas phase infrared spectrum of 3-aminoacetophenone (3AAP) was measured in the range 5000-500cm(-1) and with a resolution of 0.5cm(-1). The Fourier transform Raman (FT-Raman) and Fourier transform infrared (FT-IR) spectra of 3AAP were recorded in the solid phase. Geometry optimizations were done without any constraint and several thermodynamic parameters were calculated for the minimum energy conformer at ab initio and density functional theory (DFT) levels invoking 6-311G(2df 2p) basis set and the results are compared with the experimental values. Harmonic-vibrational wavenumber was also calculated for the minimum energy conformer at ab initio and DFT levels using 6-31G(d,p) basis set and the results are compared with related molecules. With the help of specific scaling procedures, the observed vibrational wavenumbers in gas phase, FT-IR and FT-Raman spectra were analyzed and assigned to different normal modes of the molecule. Most of the modes have wavenumbers in the expected range, the error obtained was in general very low. The appropriate theoretical spectrogram for the FT-IR spectra of the title molecule is also constructed.     

Vibrational spectroscopy investigation using ab initio and density functional theory analysis on the structure of 2-amino-5-methylphenol

The laser Raman and Fourier transform infrared spectra of 2-amino-5-methylphenol were recorded in the solid phase. The equilibrium geometry, harmonic vibrational frequencies, infrared intensities, Raman scattering activities, depolarization ratios and reduced masses were calculated by HF and density functional B3LYP methods by using 6-311+G(d,p) basis set. The scaled theoretical wavenumbers showed very good agreement with the experimental values. The thermodynamic functions of the title compound were also performed at HF/6-31G(d,p)/6-311+G(d,p) and B3LYP/6-31G(d,p)/6-311+G(d,p) levels of theory. A detailed interpretations of the infrared and Raman spectra of 2-amino-5-methylphenol is reported. The theoretical spectrograms for FT-IR spectra of the title molecule have been constructed.     

Experimental (FTIR and FT-Raman) and ab initio and DFT study of vibrational frequencies of 5-amino-2-nitrobenzoic acid

The FTIR and FT-Raman spectra of 5-amino-2-nitrobenzoic acid (ANB) have been recorded in the region 400-4000cm(-1). The observed frequencies were assigned to different modes of vibrations on the basis of fundamental, combination and overtones. The geometry has been optimized with complete relaxation on the potential energy surface at HF, MP2 and B3LYP level of theories using 6-311++G(d,p) basis set and compared with the crystal data. The possible hydrogen bond interaction has been estimated taking a model compound. Further harmonic vibrational frequency calculations have been carried out at HF and B3LYP levels and the scaled values were in good agreement with majority of the experimental observations. The theoretically constructed spectra coincide satisfactorily with those of experimental spectra.     

Molecular structure and vibrational spectra of phenobaraitone by density functional theory and ab initio hartree-Fock calculations

Quantum chemistry calculations have been performed using Gaussian03 program to compute optimized geometry, harmonic vibrational frequency along with intensities in IR and Raman spectra at RHF/6-31++G** and B3LYP/6-31++G** levels for phenobarbitone (C₁₂H₁₂N₂O₃) in the ground state. The scaled harmonic vibrational frequencies have been compared with experimental FT-IR and FT-Raman spectra. Theoretical vibrational spectra of the title compound were interpreted by means of potential energy distributions (PEDs) using MOLVIB program. A detailed interpretation of the infrared spectra of the title compound is reported. On the basis of the agreement between the calculated and observed results, the assignments of fundamental vibrational modes of phenobarbitone were examined and some assignments were proposed. The theoretical spectrograms for FT-IR and FT-Raman spectra of the title compound have been constructed.     

Vibrational spectroscopy investigation using ab initio and density functional theory on p-anisaldehyde

The FTIR and FT Raman spectra of p-anisaldehyde has been recorded in the regions 4,000-400 and 3,500-100 cm(-1), respectively. The optimized geometry, frequency and intensity of the vibrational bands of p-anisaldehyde were obtained by ab initio and DFT levels of theory with complete relaxation in the potential energy surface using 6-31G(d,p) basis set. A complete vibrational assignment aided by the theoretical harmonic frequency analysis has been proposed. The harmonic vibrational frequencies calculated have been compared with experimental FTIR and FT Raman spectra. The observed and the calculated frequencies are found to be in good agreement. The experimental spectra also coincide satisfactorily with those of theoretically constructed bar type spectrograms.     

Vibrational spectroscopy investigation using ab initio and density functional theory analysis on the structure of 5-amino-o-cresol

The Fourier transform Raman and Fourier transform infrared spectra of 5-amino-o-cresol (5AOC) were recorded in the solid phase. The equilibrium geometry, harmonic vibrational frequencies, infrared intensities and Raman scattering activities were calculated by HF and density functional B3LYP method with the 6-311G(d,p) basis set. The scaled theoretical wavenumbers showed very good agreement with the experimental values. The thermodynamic functions of the title compound were also performed at HF/6-311G(d,p) and B3LYP/6-311G(d,p) levels of theory. A detailed interpretation of the infrared and Raman spectra of 5-amino-o-cresol is reported. The theoretical spectrograms for FT-IR spectra of the title molecule have been constructed.     

Vibrational spectroscopy investigation using ab initio and density functional theory analysis on the structure of 3,4-dimethylbenzaldehyde

The FT-IR and FT-Raman spectra of 3,4-dimethylbenzaldehyde (3,4-DMB) has been recorded in the region 4000-400 and 3500-100 cm(-1), respectively. The optimized geometry, frequency and intensity of the vibrational bands of 3,4-DMB were obtained by the ab initio and DFT levels of theory with complete relaxation in the potential energy surface using 6-311G(d,p) basis set. The harmonic vibrational frequencies were calculated and the scaled values have been compared with experimental FT-IR and FT-Raman spectra. The observed and the calculated frequencies are found to be in good agreement. The experimental spectra also coincide satisfactorily with those of theoretically constructed bar type spectrograms.     

Vibrational spectroscopy investigation using ab initio and density functional theory analysis on the structure of 3-aminobenzotrifluoride

In this work, we will report a combined experimental and theoretical study on molecular and vibrational structure of 3-aminobenzotrifluoride. The FT-Raman and Fourier transform infrared spectra of 3-aminobenzotrifluoride (3ABTF) were recorded in the liquid phase. The equilibrium geometry, harmonic vibrational frequencies, infrared intensities and Raman scattering activities, depolarization ratios, reduced masses were calculated by HF and density functional B3LYP method with the 6-31G(d,p) and 6-311G(d,p) basis sets. The scaled theoretical wavenumbers showed very good agreement with the experimental values. The thermodynamic functions of the title compound were also performed at HF/6-31G(d,p)/6-311G(d,p) and B3LYP/6-31G(d,p)/6-311G(d,p) levels of theory. A detailed interpretations of the infrared and Raman spectra of 3ABTF is reported. The theoretical spectrograms for FT-IR spectra of the title molecule have been constructed.     

An experimental and theoretical study of molecular structure and vibrational spectra of 2-chloronicotinic acid by density functional theory and ab initio Hartree–Fock calculations

In this work, the Fourier transform Raman and Fourier transform infrared spectra of 2-chloronicotinic acid (2-CNA) are recorded in the solid phase. The molecular geometry, vibrational frequencies, infrared intensities and Raman scattering activities of 2-CNA in ground state have been calculated by using ab initio Hartree–Fock (HF) and density functional (B3LYP and B3PW91) methods with 6-31G(d) and 6-311G(d) basis sets level. On the basis of the comparison between calculated and experimental results and the comparison with related molecule, assignments of fundamental vibrational modes are examined. The optimized geometric parameters (bond lengths and bond angles) obtained by using HF show the best agreement with the experimental values of 2-CNA. Comparison of the observed fundamental vibrational frequencies of 2-CNA and calculated results by density functional (B3LYP and B3PW91) and Hartree–Fock methods indicates that B3LYP is superior to the scaled Hartree–Fock and B3PW91 approach for molecular vibrational problems.     

Ab initio, density functional theory and structural studies of 4-amino-2-methylquinoline

The Fourier transform infrared (FTIR) and FT-Raman spectra of 4-amino-2-methylquinoline (AMQ) have been recorded in the range 4000–400 and 4000–100 cm⁻¹, respectively. The experimental vibrational frequency was compared with the wavenumbers obtained theoretically by ab initio HF and DFT–B3LYP gradient calculations employing the standard 6-31G** and high level 6-311++G** basis sets for optimised geometry of the compound. The complete vibrational assignment and analysis of the fundamental modes of the compounds were carried out using the experimental FTIR and FT-Raman data, and quantum mechanical studies. The geometry and normal modes of vibration obtained from the HF and DFT methods are in good agreement with the experimental data. The potential energy distribution of the fundamental modes was calculated with ab initio force fields utilising Wilson's FG matrix method. The NH-π interactions and the influence of amino and methyl groups on the skeletal modes are investigated.     

Molecular structure and vibrational spectra of lepidine and 2-chlorolepidine by density functional theory and ab initio Hartree–Fock Calculations

The molecular geometry and vibrational frequencies of lepidine and 2-chlorolepidine in the ground state have been calculated by using the Hartree–Fock and density functional methods (B3LYP) with 6-31G (d) as the basis set. The optimized geometric bond lengths obtained by using B3LYP and bond angles obtained by HF that correspond to the experimental values of 2-cl-lepidine molecule were given. Comparison of the observed fundamental vibrational frequencies of lepidine and 2-chlorolepidine, and calculated results by density functional B3LYP and Hartree–Fock methods indicates that B3LYP is superior to the scaled Hartree–Fock approach for molecular vibrational problems.     

Vibrational assignment of the spectral data and thermodynamic properties of 2-chloro-4-fluorobenzophenone using DFT quantum chemical calculations

The FT-Raman (3500-100 cm⁻¹) and FT-IR (4000-450 cm⁻¹) spectra of 2-chloro-4-fluorobenzophenone were recorded in the solid phase. Density functional theory calculations with B3LYP/6-31G (d, p) basis set was used to determine the ground state molecular geometries (bond lengths and bond angles), harmonic vibrational frequencies, infrared intensities and Raman activities of this compound. Potential energy distributions (PEDs) and normal modes, for the spectral data computed at B3LYP/6-31G (d, p) level, have also been obtained from force-field calculations. The wavenumbers found after scaling of the force field showed very good agreement with the experimentally determined values. A comparison of the theoretical spectra and experimental FT-IR and FT-Raman spectra of the title molecule has been made and full vibrational assignments of the observed spectra have been proposed. On the basis of vibrational analyses, the thermodynamic properties of title compound at different temperatures have been calculated.     

Molecular structure, harmonic and anharmonic frequency calculations of 2,4-dichloropyrimidine and 4,6-dichloropyrimidine by HF and density functional methods

Quantum chemical calculations of energies, geometrical structural parameters, harmonic and anharmonic frequencies of 2,4-DCP and 4,6-DCP were carried out by HF and density functional theory methods with 6-311++G(d,p) as basis set. The assignment of each normal mode has been made using the observed and calculated frequencies, their IR and Raman intensities. A detailed interpretation of the FT-IR and FT-Raman spectra of 2,4-DCP and 4,6-DCP was reported on the basis of the calculated potential energy distribution (PED). A comparison of theoretically calculated vibrational frequencies at B3LYP/6-311++G(d,p) with FT-IR and FT-Raman experimental data shows good agreement between them. Natural atomic charges of 2,4-DCP and 4,6-DCP were calculated and compared with pyrimidine molecule.     

MP2, DFT and ab initio calculations on thioxanthone

Density functional theory (DFT), HF and MP2 calculations have been carried out to investigate thioxanthone molecule using the standard 6-31+G(d,p) basis set. The results of MP2 calculations show a butterfly structure for thioxanthone. The calculated results show that the predicted geometry can well reproduce the structural parameters. The predicted vibrational frequencies were assigned and compared with experimental IR spectra. A good harmony between theory and experiment is found. The theoretical electronic absorption spectra have been calculated using CIS method. ¹³C and ¹H NMR of the title compound have been calculated by means of B3LYP density functional method with 6-31+G(d,p) basis set. The comparison of the experimental and the theoretical results indicate that density functional B3LYP method is able to provide satisfactory results for predicting NMR properties.     

An ab initio and DFT study of structure and vibrational spectra of disiloxane H3SiOSiH3 conformers. Comparison to experimental data

The structural and vibrational properties of siloxane monomers may account in the physical and chemical properties of silicone polymers. Because disiloxane (H(3)SiOSiH(3)) is the smallest molecule in the set which runs through small siloxanes like hexamethyldisiloxane (CH(3))3SiOSi(CH(3))3 to silicone polymers, its energetic, structural and vibrational features have been investigated in detail using density functional theory (B3LYP), post Hartree-Fock methods (MP2 and CCSD(T)) and basis sets up to spdfg quality. Five conformations were considered: three bent structures with C2v (double staggered, SS, and double eclipsed, EE, conformations) and Cs symmetries, and two linear forms with D3d and D3h symmetries. At all levels of theory, the relative stability was C2v(SS) approximately C2v(EE)>Cs>D3h>D3d. The difference of energy between the two C2v conformers is lower than 0.04 kcal/mol. At the highest level of theory (CCSD(T)/cc-pVQZ), the barrier to linearisation from C(2v) to D(3h) conformers was calculated at 0.43 kcal/mol, which is extremely low. Most of the structural and vibrational features of the disiloxane do not depend on the conformation of the molecule but are strongly influenced by the SiOSi angle. Anharmonic calculations allowed, without any scaling factor, an exhaustive reinvestigation of the assignments of observed wavenumbers in the infrared and Raman spectra of gaseous disiloxane. Particularly, in the gas phase spectrum, the SiOSi symmetric and antisymmetric stretches have been assigned at 599 and 1105, 596 and 1060, 527 and 1093 cm(-1) for H(3)SiOSiH(3), H(3)Si(18)OSiH(3) and D(3)SiOSiD(3), respectively. The experimental wavenumber splitting of SiOSi symmetric and antisymmetric stretches of H(3)SiOSiH(3) gave an estimation of the SiOSi angle at around 145 degrees . Ab initio methods were revealed more accurate for structural parameters, when DFT/B3LYP was enough for spectral assignments, even at the harmonic level using a single scaling factor.     

The vibrational and NMR spectra,conformations and ab initio calculations of aminomethylene,propanedinitrile and itsN-methyl derivatives

The IR and Raman spectra of aminomethylene propanedinitrile (AM) [H₂N-CH=C(CN)₂], (methylamino)methylene propanedinitrile (MAM) [CH₃NH-CH=C(CN)₂] and (dimethylamino)methylene propanedinitrile (DMAM) [(CH₃)₂N-CH=C(CN)₂] as solids and solutes in various solvents have been recorded in the region 4000-50 cm^–1. AM and DMAM can exist only as one conformer. From the vibrational and NMR spectra of MAM in solutions, the existence of two conformers with the methyl group orientedanti andsyn toward the double C=C bond were confirmed. The enthalpy difference H ⁰ between the conformers was measured to be 3.7±1.4 kJ mol^–1 from the IR spectra in acetonitrile solution and 3.4±1.1 kJ mol^–1 from the NMR spectra in DMSO solution. Semiempirical (AM1, PM3, MNDO, MINDO3) and ab initio SCF calculations using a DZP basis set were carried out for all three compounds. The calculations support the existence of two conformersanti andsyn for MAM, withanti being 7.8 kJ mol^–1 more stable thansyn from ab initio and 8.6, 13.4, 11.6, and 10.8 kJ mor^–1 from AM1, PM3, MNDO, and MINDO3 calculations, respectively. Finally, complete assignments of the vibrational spectra for all three compounds were made with the aid of normal coordinate calculations employing scaled ab initio force constants. The same scale factors were optimized on the experimental frequencies of all three compounds, and a very good agreement between calculated and experimental frequencies was achieved.     

Vibrational spectra and assignments using ab initio and density functional theory analysis on the structure of biotin

Density functional theory (DFT) and Hartree-Fock calculations were performed using the following models: HF/6-311G(d), B3LYP/6-311G(d), B3LYP/6-311+G(d) and B3PW91/6-311G(d) calculations were performed for biotin. It has been characterized by IR and X-ray. The calculated results show that the predicted geometry can well reproduce the structural parameters. Predicted vibrational frequencies have been assigned and compared with experimental IR spectra and they supported each other. On the basis of vibrational analyses, the thermodynamic properties of the title compound at different temperatures have been calculated, revealing the correlations between Cp,m degrees, Sm degrees, Hm degrees and temperatures.     

Molecular structure and vibrational assignment of melaminium phthalate by density functional theory (DFT) and ab initio Hartree-Fock (HF) calculations

The molecular geometry, the normal mode frequencies and corresponding vibrational assignment of melaminium phthalate (C₃H₇N₆⁺·C₈H₅O₄⁻) in the ground state were performed by HF and B3LYP levels of theory using the 6-31G(d) basis set. The optimized bond length numbers with bond angles are in good agreement with the X-ray data. The vibrational spectra of melaminium phthalate which is calculated by HF and B3LYP methods, reproduces vibrational wave numbers with an accuracy which allows reliable vibrational assignments. The title compound has been studied in the 4000–100 cm⁻¹ region where the theoretical evaluation and assignment of all observed bands were made.