A mass spectrometry study of alkanes in air plasma at atmospheric pressure

The positive APCI-mass spectra in air of linear (n-pentane, n-hexane, n-heptane, n-octane), branched [2,4-dimethylpentane, 2,2-dimethylpentane and 2,2,4-trimethylpentane (i-octane)], and cyclic (cyclohexane) alkanes were analyzed at different mixing ratios and temperatures. The effect of air humidity was also investigated. Complex ion chemistry is observed as a result of the interplay of several different reagent ions, including atmospheric ions O₂^+•, NO⁺, H₃O⁺, and their hydrates, but also alkyl fragment ions derived from the alkanes. Some of these reactions are known from previous selected ion/molecule reaction studies; others are so far unreported. The major ion formed from most alkanes (M) is the species [M − H]⁺, which is accompanied by M^+• only in the case of n-octane. Ionic fragments of C _n H_2n ^+1/+ composition are also observed, particularly with branched alkanes: the relative abundance of such fragments with respect to that of [M − H]⁺ decreases with increasing concentration of M, thus suggesting that they react with M via hydride abstraction. The branched C₇ and C₈ alkanes react with NO⁺ to form a C₄H₁₀NO⁺ ion product, which upon collisional activation dissociates via HNO elimination. The structure of t-Bu⁺(HNO) is proposed for such species, which is reasonably formed from the original NO⁺(M) ion/molecule complex via hydride transfer and olefin elimination. Finally, linear alkanes C₅–C₈ give a product ion corresponding to C₄H₇⁺(M), which we suggest is attributed to addition of [M − H]⁺ to C₄H₈ olefin formed in the charge-transfer-induced fragmentation of M. The results are relevant to applications of nonthermal plasma processes in the fields of air depuration and combustion enhancement.     

Significant Influence of Zn on Activation of the C‐H Bonds of Small Alkanes by Brønsted Acid Sites of Zeolite

Herein, we analyze earlier obtained and new data about peculiarities of the H/D hydrogen exchange of small C₁–n‐C₄ alkanes on Zn‐modified high‐silica zeolites ZSM‐5 and BEA in comparison with the exchange for corresponding purely acidic forms of these zeolites. This allows us to identify an evident promoting effect of Zn on the activation of C? H bonds of alkanes by zeolite Brønsted sites. The effect of Zn is demonstrated by observing the regioselectivity of the H/D exchange for propane and n‐butane as well as by the increase in the rate and a decrease in the apparent activation energy of the exchange for all C₁–n‐C₄ alkanes upon modification of zeolites with Zn. The influence of Zn on alkane activation has been rationalized by dissociative adsorption of alkanes on Zn oxide species inside zeolite pores, which precedes the interaction of alkane with Brønsted acid sites.     

Additional insights from very‐high‐resolution 13C NMR spectra of long‐chain n‐alkanes

New information has been obtained from very‐high‐resolution ¹³C NMR studies of a series of long‐chain n‐alkanes. These compounds are fundamentally important in the petroleum industry and are essential to the life of some plants, flowers, and insects. At least partial resolution of the ten different ¹³C NMR signals of n‐C₂₀H₄₂ is observed at 11.7 T for solutions in C₆D₆ or C₆D₅CD₃. A ¹³C T₁ inversion‐recovery experiment provides much more detailed information than in previous studies of long‐chain n‐alkanes, demonstrates a steady increase in the relaxation times of the ten different carbons proceeding from the middle to the end of the chain because of segmental motion, and thus confirms the assignments for the interior carbons. In contrast, there is significant overlap for the signals for C‐7 and the more interior carbons in a solution of n‐C₁₆ or longer chain alkanes in CDCl₃. Not only are the chemical shifts sensitive to the solvent used, but also the relative chemical shifts change. Signals for the interior carbons of the odd‐number alkanes in CDCl₃ are better resolved than in the spectra of their even‐number counterparts. Some mixed aromatic solvent systems give increased dispersion of the cluster of C‐6 through C‐10 signals of n‐C₂₀H₄₂, n‐C₂₁H₄₄, and n‐C₂₂H₄₆. However, none of the solvents used could even partially resolve the C‐10 and C‐11 signals of n‐C₂₁H₄₄ or n‐C₂₂H₄₆ at 11.7 T, which may result from a different distribution of conformers for n‐C₂₁H₄₄ or n‐C₂₂H₄₆ than for n‐C₂₀H₄₂ and shorter n‐alkanes. Copyright © 2013 John Wiley & Sons, Ltd.     

Conjugate conversion of methanol and n-butane on zinc-zirconium catalysts

Conversion of n-butane, methanol, and their mixture on ZSM-5 zeolite catalysts containing zinc and/or zirconium was studied, and ways were found to control the yield and ratio of major reaction products: C₁-C₃ alkanes, C₂-C₄ alkenes, C₅-C₇ isoalkanes, and arenes. The schemes of formation of these products were suggested.     

Synthesis of catalytic filamentous carbon on a nickel/graphite catalyst and a study of the resulting carbon-carbon composite materials in microbial fuel cells

The carbon-carbon composite materials obtained via the synthesis of catalytic filamentous carbon (CFC) on a Ni/graphite supported catalyst in the process of the pyrolysis of C₃–C₄ alkanes in the presence of hydrogen were systematically studied. The effects of the following conditions on the catalytic activity expressed as the yield of carbon (g CFC)/(g Ni) and on the character of CFC synthesis on graphite rods were studied: procedures for supporting Ni(II) compounds (impregnation and homogeneous precipitation), the concentrations of impregnating compouds (nickel nitrate, urea, and ethyl alcohol) in solution, graphite treatment (oxidation) conditions before supporting Ni(II) compounds, and the pyrolysis temperature of C₃–C₄ alkanes in the range of 400–600°C. Optimum conditions for preparing CFC/graphite composite materials, which are promising for use as electrodes in microbial fuel cells (MFCs), were chosen. The electrochemical characteristics of an MFC designed with the use of a CFC/graphite electrode (anode) and Gluconobacter oxydans glycerol-oxidizing bacteria were studied. The morphology of the surfaces of graphite, synthesized CFC, and also bacterial cells adhered to the anode was studied by scanning electron microscopy.     

Effect of n-alkanes and peptides on the phase equilibria in phosphatidylcholine—water systems

Abstract

The phase equilibria in phosphatidylcholine (PC)-n-alkane-²H₂O systems have been studied to elucidate the driving forces for the transition between a lamellar liquid-crystalline (L _α) phase and a reversed hexagonal (H _II) phase. A tentative phase diagram for the system dioleoyl-PC (DOPC)-n-dodecane-²H₂O was determined. DOPC forms an L _α phase up to at least 90°C in excess water. However, an H _II phase was formed at room temperature at both low and high water concentrations in DOPC-n-dodecane-²H₂O mixtures. The phase equilibria were also studied in PC-n-dodecane-²H₂O systems containing PC with different degrees of acyl chain unsaturation. The water and dodecane concentrations required to induce the formation of an H _II (or isotropic) phase increase in the order dilinoleoyl-PC ～ DOPC < 1-palmitoyl-2-oleoyl-PC < dipalmitoyl-PC. The effect of n-alkanes with different chain lengths (C₈–C₂₀) on the phase equilibria in DOPC-n-alkane-²H₂O mixtures was studied. Although the number of alkane carbon atoms added per DOPC molecule was kept constant, the ability of the alkanes to promote the formation of an H _II phase was strongly chain length dependent; the ability decreased when going from octane to eicosane. Finally, some PC-peptide-²H₂O systems were investigated. Gramicidin (hydrophobic) had a similar influence on the phase equilibria as the alkanes. Melittin (amphiphilic) induced the formation of an isotropic phase, while insulin and duramycin (water soluble) had no, or a very limited, ability to induce a non-lamellar phase, respectively. Our results are discussed in the light of simple physical models dealing with the self-assembly of amphiphiles.     

Hydrocarbon adsorption on gold clusters: Experiment and quantum chemical modeling

Heats of adsorption Q of n-alkanes C₆–C₉ on ZrO₂ modified with gold and nickel nanoparticles were determined experimentally. The Q values were found to be higher on average by 7 kJ/mol on the modified samples as compared to the pure support. Density functional theory with the PBE functional and the pseudopotential for gold effectively allowing for relativistic corrections was used to model the adsorption of saturated hydrocarbons on Au and Au + Ni, as exemplified by the interaction of alkanes C₁–C₃ with Au _m , Au _{m − 1}Ni (m = 3, 4, 5) clusters as well as the interaction of C₁–C₈ with Au₂₀. Based on the calculation results, the probable coordination centers of alkanes on nanoparticle surfaces were found to be vertices and edges, whereas face localization was less probable.     

Cyclooctane Metathesis Catalyzed by Silica‐Supported Tungsten Pentamethyl [(SiO)W(Me)5]: Distribution of Macrocyclic Alkanes

Metathesis of cyclic alkanes catalyzed by the new surface complex [(?SiO)W(Me)₅] affords a wide distribution of cyclic and macrocyclic alkanes. The major products with the formula C_nH_2n are the result of either a ring contraction or ring expansion of cyclooctane leading to lower unsubstituted cyclic alkanes (5≤n≤7) and to an unprecedented distribution of unsubstituted macrocyclic alkanes (12≤n≤40), respectively, identified by GC/MS and by NMR spectroscopies.     

Mechanism of reaction of n-butane with but-2-enes in the presence of LaCaX faujasites

The reactions of n-butane and an n-butane (80 mol.%)—isobutane (20 mol.%) mixture with but-2-enes in the presence of polycationic PdLaCaX faujasites were studied. Quantum-chemical calculation of the enthalpies of formation of alkanes C₄—C₈ and their cations showed that the reaction [Bnⁿ]⁺ [Buⁱ]⁺ is of crucial importance for the isomeric composition of the products of alkane alkylation. The general scheme of transformations of the hydrocarbons in the alkylation of n- and iso-paraffins was proposed based on the experimental data on the distribution of the C₈ isomers in the catalyzate at different temperatures and duration of the reaction.     

On the Gas‐Phase Reactivity of Complexed OH+ with Halogenated Alkanes

OH⁺ is an extraordinarily strong oxidant. Complexed forms (L? OH⁺), such as H₂OOH⁺, H₃NOH⁺, or iron–porphyrin‐OH⁺ are the anticipated oxidants in many chemical reactions. While these molecules are typically not stable in solution, their isolation can be achieved in the gas phase. We report a systematic survey of the influence on L on the reactivity of L? OH⁺ towards alkanes and halogenated alkanes, showing the tremendous influence of L on the reactivity of L? OH⁺. With the help of with quantum chemical calculations, detailed mechanistic insights on these very general reactions are gained. The gas‐phase pseudo‐first‐order reaction rates of H₂OOH⁺, H₃NOH⁺, and protonated 4‐picoline‐N‐oxide towards isobutane and different halogenated alkanes C_nH_2n+1Cl (n=1–4), HCF₃, CF₄, and CF₂Cl₂ have been determined by means of Fourier transform ion cyclotron resonance meaurements. Reaction rates for H₂OOH⁺ are generally fast (7.2×10^?10–3.0×10^?9 cm³ mol^?1 s^?1) and only in the cases HCF₃ and CF₄ no reactivity is observed. In contrast to this H₃NOH⁺ only reacts with tC₄H₉Cl (k_obs=9.2×10^?10), while 4‐CH₃‐C₅H₄N‐OH⁺ is completely unreactive. While H₂OOH⁺ oxidizes alkanes by an initial hydride abstraction upon formation of a carbocation, it reacts with halogenated alkanes at the chlorine atom. Two mechanistic scenarios, namely oxidation at the halogen atom or proton transfer are found. Accurate proton affinities for HOOH, NH₂OH, a series of alkanes C_nH_2n+2 (n=1–4), and halogenated alkanes C_nH_2n+1Cl (n=1–4), HCF₃, CF₄, and CF₂Cl₂, were calculated by using the G3 method and are in excellent agreement with experimental values, where available. The G3 enthalpies of reaction are also consistent with the observed products. The tendency for oxidation of alkanes by hydride abstraction is expressed in terms of G3 hydride affinities of the corresponding cationic products C_nH_2n+1⁺ (n=1–4) and C_nH_2nCl⁺ (n=1–4). The hypersurface for the reaction of H₂OOH⁺ with CH₃Cl and C₂H₅Cl was calculated at the B3 LYP, MP2, and G3_m* level, underlining the three mechanistic scenarios in which the reaction is either induced by oxidation at the hydrogen or the halogen atom, or by proton transfer.     

Relationship between retention behaviour and molecular structure of alkanes in reversed phase high performance liquid chromatography

Summary The retention data of 54 alkanes C₅-C₁₁ with different degrees of branching were determined in order to study the relationship between retention behaviour and the structure of alkanes by reversed phase high-performance liquid chromatography. The structural parameters influencing the retention of alkanes are described. The connectivity index was employed to correlate the structures of alkanes with their retention data.

---

Beziehung zwischen Retentionsverhalten und Molekularstruktur von Alkanen in der Umkehrphasen-HPLC

Zusammenfassung Zur Untersuchung dieser Beziehung wurden die Retentionsdaten von 54 Alkanen (C₅-C₁₁) mit verschiedenem Verzweigungsgrad bestimmt. Die Strukturparameter, die die Retention beeinflussen, werden diskutiert. Zur Korrelation der Strukturen mit ihren Retentionsdaten wird das Indexinkrement benutzt.

     

Ion-molecule reactions of primary radical cations in the liquid-phase radiolysis of <Emphasis Type="Italic">n</Emphasis>-alkanes: An EPR study

Radiation-chemical yields the liquid-phase radiolysis of C₅–C₁₂ n-alkanes were measured using the spin trap technique. The yields of n-alkyl radicals depended only slightly on the chain length in C₅–C₉ alkanes and amounted up to 30% of the total yield of trapped radicals; they were inhibited by the addition of charge scavengers. An analysis of the experimental results together with data on radicals in irradiated crystalline alkanes and radical cations in freon matrices showed that n-alkyl radicals results from the ion-molecule reactions of primary radical cations, whereas the protonated ions RH₂⁺ as products of these reactions are a source of sec-alkyl radicals. At least 60% of primary radical cations are consumed via these reaction pathways. A part of sec-alkyl radicals is due to gauche-conformers. The relative amount of primary alkyl radicals formed in the degradation of excited states and the subsequent charge neutralization processes should be insignificant.Translated from Khimiya Vysokikh Energii, Vol. 39, No. 1, 2005, pp. 5–14.Original Russian Text Copyright © 2005 by Belevskii, Belopushkin.     

The Binary System Tetradecanedioic Acid–Hexadecanedioic Acid: Polymorphism of the Components and Experimental Phase Diagram

Complementary techniques had to be applied to investigate the binary system tetradecanedioic acid (C₁₄H₂₆O₄)–hexadecanedioic acid (C₁₆H₃₀O₄), because all the forms observed have the same space group (P2₁/c; Z = 2). We studied the polymorphism of the two single compounds and of their mixtures by X‐ray powder diffraction, differential‐scanning calorimetry (DSC), infrared spectroscopy (IR), scanning electron microscopy (SEM), and thermo‐optical microscopy (TOM). The two diacids were found to be isopolymorphic. At low temperature, they crystallize in the same ordered C‐form, and, on heating, adopt the ordered C_h‐form, 1° below their melting point. In contrast to similar compounds (unbranched alkanes, alkanols, and fatty acids), the solid–solid and solid–liquid phase‐transition temperatures decrease with increasing chain length. At low temperature, a new monoclinic form, C_i, appears as a result of the disorder of composition in the mixed samples. There are two [C + C_i]‐type solid–solid domains. On heating, the solid domains are related to solid–liquid domains by a peritectic invariant for compositions rich in C₁₄H₂₆O₄, and by a eutectic invariant for compositions rich in C₁₆H₃₀O₄. At higher temperature, there appears a second peritectic invariant for compositions rich in C₁₄H₂₆O₄, together with a metatectic invariant for compositions rich in C₁₆H₃₀O₄. All the solid forms observed in this binary system are isostructural. Nevertheless, the equilibrium between them is complex near the melting point, and their miscibility in the solid state is reduced.     

Large Volume Injection in Fast Gas Chromatography with On‐Column Injector

In this work a fast gas chromatography set‐up with on‐column injection was optimized and evaluated with a model mixture of C₈–C₂₈ n‐alkanes. Usual injection volumes when using narrow‐bore (e. g., 0.1 mm i.d.) analytical columns are ca. 0.1 μL. The presented configuration allows introduction of 10–30‐fold larger sample volumes without any distortion of peak shapes. In the set‐up a normal‐bore retention gap (1 m×0.32 mm i. d.) was coupled to a narrow‐bore (4.8 m×0.1 mm i. d.×0.4 μm film thickness) analytical column using a low dead volume column connector. The effects of the experimental conditions such as inlet pressure, sample volume, initial injection temperature, and oven temperature on a peak focusing are discussed. H‐u curves for helium and hydrogen are used to compare their suitability for high speed gas chromatography and to show the dependence of separation efficiency on the carrier gas velocity at high inlet pressures. In the fast gas chromatography system a baseline separation of C₁₀–C₂₈ n‐alkanes was achieved in less than 3 minutes.     

Cocatalytic effect of palladium and zinc in the condensation of alcohol carbon backbones into hydrocarbons

The results of the direct conversion of ethanol and its mixture with glycerol into a C₄–C₁₀₊ alkane and olefin fraction in the presence of Pd-, Zn-, and Pd-Zn-containing catalysts, which were prepared by supporting homo- and heterometallic acetate complexes onto the surface of γ-Al₂O₃, are reported. It was found that, in the presence of mono- and bicomponent Pd-ZnO (Pd; ZnO)/γ-Al₂O₃ systems, selectivity in the formation of alkanes, olefins, or their mixtures in the target fraction can be controlled as a result of the cocatalytic effect of active components that are responsible for the catalyst activity in condensation and hydrogenation reactions. The structures of the active components were studied and the genesis of the catalytic systems was characterized using XAFS, XPS, and XRD analysis. It was found that the addition of glycerol considerably increased the yield of the target hydrocarbon fraction.     

Conjugate Conversion of Methanol and Lower Alkanes C3-C4 on Zeolite-Containing Catalysts

Simultaneous conversion of methanol and lower alkanes C₃-C₄ on high-silica zeolites of ZSM-5 type of various compositions (SiO₂/Al₂O₃ 30, 50, 90) was studied. The catalytic activity of zeolite catalysts and their physicochemical properties (acidity, sorption capacity, and pore structure) were evaluated.     

The Neutral Part of the Bark of Pinus Taiwanensis Hayata

The neutral part of the acetone extract from the bark of Pinus taiwanensis Hayata has been Investigated and found to consist of alkanes (C₁₄-C₃₃), longifolene, aliphatic esters (C₄₂, C₄₄, C₄₉), aliphatic alcohols (C₂₄, C₂₆), 3β-21α-dimethoxyserrat-14-enc, 3β-methoxyserrat-14-en-21-one, β-sitosterol, 3β-methoxyserrat-14-en-21ã-ol and 3β-hydroxyserrat-14-en-21-one.     

Fluorescence Quenching Study of Zinc Bisporphyrins by Fulleropyrrolidines and Their N-Oxides

Novel phenylene-bridged zinc bisporphyrins （1-4）, fulleropyrrolidines （C60-m, C60-h） and their N-oxides （C60-mo, C60-ho） were synthesized. The fluorescence quenching processes of bisporphyrins in toluene solution by fulleropyrrolidines and their N-oxides were investigated by steady-state fluorescence spectra. The fluorescence quenching constants proved that the fluorescence quenching ability was decreased as reduction of the pyrrolidine functional groups of fullerene surface： C60-h〉C60-m〉C60, and the fluorescence quenching ability was increased about 1.3-7.4 times by utilizing fulleropyrrolidine N-oxides （C60-mo, C60-ho） compared to fulleropyrrolidine compounds （C60-m, C60-h）. The results revealed photoinduced electron transfer （PET） efficiency between bispor-phyrin and fullerene derivatives could be tunable by change of functional groups on fullerene surface.     

Electron impact mass spectrometry of alkanes in supersonic molecular beams

The electron impact mass spectrometry of straight chain alkanes C₈H₁₈-C₄₀H₈₂, squalane, methylstearate, 1-chlorohexadecane, 1-bromohexadecane, and dioctylphthalate was studied by sampling them with supersonic molecular beams. A fly-through Brink-type electron impact ion source was used, utilizing a vacuum background ion filtration technique based on differences between the kinetic energy of the supersonic beam species and that of thermal molecules. The 70-eV electron impact mass spectra of all the alkanes were characterized by a pronounced or dominant molecular weight peak together with all the fragment ions normally exhibited by the standard thermal 70-eV EI mass spectra. In contrast, the NIST library of most of these molecules did not show any molecular weight peak. By eliminating tile intramolecular thermal vibrational energy we gained control over the degree of molecular ion fragmentation by the electron energy. At an electron energy of 18 eV the molecular ion dissociation was further reduced considerably, with only a small absolute reduction in the peak height by less than a factor of 2. The effect of vibrational cooling increased with the molecular size and number of atoms. Pronounced differences were observed between the mass spectra of the straight chain triacontane and its branched isomer squalane. Similar mass spectra of octacosane (C₂₈H₅₈) achieved with 70-eV EI in a supersonic molecular beam were obtained with a magnetic sector mass spectrometer by using an electron energy of 14 eV and an ion source temperature of 150 °C. However, this ion source temperature precluded the gas chromatography-mass spectrometry (GC-MS) of octacosane. The GC-MS of alkanes was studied with an ion trap gas chromatograph-mass spectrometer at an ion source temperature of 230 °C. Thermal peak tailing was observed for C₂₀H₄₂ and heavier alkanes, whereas for C₂₈H₅₈ and heavier alkanes the severe peak tailing made quantitative GC-MS impractical. In contrast, no peak tailing existed even with C₄₀H₈₂ for GC-MS in supersonic molecular beams. The minimum detected amount of eicosane (C₂₀, H₄₂) was shown to be 60 fg. This was demonstrated by using single ion monitoring with the quadrupole mass analyzer tuned to the molecular weight peak of 282 u. The coupling of electron impact mass spectrometry in supersonic molecular beams with hyperthermal surface ionization and a fast GC-MS inlet is briefly discussed.