磁质子反冲谱仪磁分析系统的设计

磁质子反冲谱仪(MPR)是测量惯性约束聚变(ICF)实验和高功率聚变装置中子能谱的一种新型高性能诊断仪器,磁分析系统是其核心部分。通过2维束流输运和3维粒子输运模拟完成了紧凑型MPR谱仪磁分析系统的设计,对系统参数及系统性能进行了分析,分别根据能量分辨力、探测效率和计数率优先原则提出3种系统设计方案。结果表明:磁分析系统在1.5%~3.0%的能量分辨力范围达到10-5~10-4量级的探测效率,结构紧凑,符合MPR谱仪的设计目标。     

Strong reduction of the degree of spatial coherence of a laser beam propagating through a preformed plasma

A strong reduction of the spatial coherence of a laser beam after its propagation through a plasma has been measured using a Fresnel biprism interferometer. The laser beam was diffraction limited; the coherence width was reduced from 40 mm in vacuum down to a few mm with the plasma. Numerical results based on a paraxial model exhibit a coherence degree close to the experimental one; they also prove the importance of taking into account the nonlocal transport effects in numerical simulations for such plasma conditions.     

上海软X射线自由电子激光装置束流分配系统设计

束流分配系统是自由电子激光装置中至关重要的一部分,它可以将直线加速器产生的电子束团分配至不同的波荡器中。提出了一种基于上海软X射线自由电子激光装置的束流分配系统设计方案。针对该方案,详细介绍了三维从头至尾的束团跟踪模拟以及在传输过程中的束流动力学分析,模拟结果表明,该束流分配系统设计可以保证束流发射度增长小于8%,同时可以保证峰值电流、能散以及束团长度在经过该分配系统时未受到破坏。此外,针对束团在直线加速器中的微束团不稳定性和抖动也进行了分析。     

Enhancing the accelerated beam current in the booster synchrotron by optimizing the transport line beam propagation

In this paper, we present the results of transverse beam emittance and twiss parameter measurement of an electron beam, delivered by a 20 MeV microtron which is used as a pre-injector system for a booster synchrotron in the Indus Accelerator Facility at RRCAT Indore. Based on these measured beam parameters, beam optics of a transport line was optimized and its results are also discussed in this paper. This beam transport line is used to transport the electron beam from the 20 MeV microtron to the booster synchrotron. The booster synchrotron works as a main injector for Indus-1 and Indus-2 synchrotron radiation facilities. To optimize the beam optics of a transport line for proper beam transmission through the line as well as to match the beam twiss parameters at the beam injection point of another accelerator, it is necessary to know the transverse beam emittance and twiss parameters of the beam coming from the first one. A MATLAB-based GUI program has been developed to calculate the beam emittance and twiss parameters, using quadrupole scan method. The measured parameters have been used for beam transport line optimization and twiss parameters matching at booster injection point. After this optimization, an enhancement of ～50% beam current has been observed in the booster synchrotron.     

Computer simulations for intense continuous beam transport in electrostatic lens systems

A code LEADS based on the Lie algebraic analysis for the continuous beam dynamics with space charge effect in beam transport has been developed.The program is used for the simulations of axial-symmetric and unsymmetricalintense continuous beam in the channels including drift spaces.electrostatic lenses and DC electrostatic accelerating tubes.In order to get the accuracy required,all elements are divided into many small segments,and the electric field in the segments is regarded as uniform field,and the dividing points are treated as thin lenses.Iteration procedures are adopted in the program to obtain self-consistent solutions.The code can be used in the designs of low energy beam transport systems,electrostatic accelerators and ion implantation machines.     

Computer simulations for intense continuous beam transport in electrostatic lens systems

A code LEADS based on the Lie algebraic analysis for the continuous beam dynamics with space charge effect in beam transport has been developed. The program is used for the simulations of axial-symmetric and unsymmetrical intense continuous beam in the channels including drift spaces, electrostatic lenses and DC electrostatic accelerating tubes. In order to get the accuracy required, all elements are divided into many small segments, and the electric field in the segments is regarded as uniform field, and the dividing points are treated as thin lenses. Iteration procedures are adopted in the program to obtain self-consistent solutions. The code can be used in the designs of low energy beam transport systems, electrostatic accelerators and ion implantation machines.     

Investigation of the onset and development of forward scattering in an underdense plasma

We investigate the distortion of a spatial intensity modulation imposed on a 527 nm f/10 probe beam as it transmits through an underdense plasma characterized with Thomson scattering. Combining the measurements with full wave simulations of beam propagation through the entire plasma show that the key features of the data can be reproduced using the Kaiser thermal transport model.     

Experimental and numerical studies of sheet electron beampropagation through a planar wiggler magnet

Detailed experimental studies on sheet relativistic electron beam propagation through a long planar wiggler are reported and compared with numerical simulations. The planar wiggler has 56 periods with a period of 9.6 mm. Typically, the wiggler field peak amplitude is 5 kG. The experimental efforts are focused on controlling the deviation of the beam toward the side edge of the planar wiggler along the wide transverse direction. It is found that a suitably tapered magnetic field configuration at the wiggler entrance can considerably reduce the rate of deviation. The effects of the following techniques on beam transport efficiency are discussed: side focusing, beam transverse velocity tuning at the wiggler entrance, and beam spread limiting. High beam transport efficiency (almost 100%) of a 15-A beam is obtained in some cases     

High current density ion-beam extraction

High current density (up to 700 mA/cm²) ion-beam extraction has been studied by 3D code KOBRA3-INP [INP, Junkerstr. 99, 65205 Wiesbaden, Germany]. Ion beams with such high current densities can be generated by ECR ion source driven by 37.5 GHz/100 kW gyrotron [Golubev S.V. et al. Trans. Furion Sci. Technol., 47, n. 1T, fuste 8, 345]. The influence of plasma parameters on extracted ion beam has been investigated. Different geometries of extraction system and applied potentials have been simulated to optimize extracted and transported ion beam current. KOBRA3-INP code has been applied to simulate ion-beam transport as well. The results of simulations have been compared with experimental results. Good agreement between measurements and simulations was always found by varying ion-beam space-charge compensation degree.     

The use of sputtering as a method for analysing surface chemical composition: A molecular dynamics study

A two-dimensional molecular dymamics study has been made of solid surface erosion by sputtering under conditions which are similar to those found in experiments designed to determine the chemical composition of solid surfaces and large adsorbed organic molecules. The kinetic energy distribution of model species emitted agrees qualitatively with experiment and as predicted by the transport theory of Sigmund. The simulations suggest that the sputtered clusters are more likely to represent the undisturbed surface as the primary beam collides at smaller angles.     

Design of medium energy beam transport line between the RFQ and the Linac in the radioactive ion beam facility at VECC,Kolkata

The design of a medium energy beam transport (MEBT) line comprising of a re-buncher and four quadrupoles, two upstream and the other two downstream of the re-buncher, has been presented. The design was done to ensure almost 100% transport of heavy-ion beams of about 99 keV/u energy from RFQ having a q/A not less than 1/14 through the re-buncher and then through IH Linac of about 0.6 m length in which beam would be accelerated to about 185 keV/u. The re-buncher has been designed to operate at 37.8 MHz, the resonating frequency of both the RFQ and the IH Linac. The entire beam line has been installed and recently O⁵⁺ beam from RFQ has been transported through the re-buncher and subsequently accelerated in the IH Linac successfully.     

周期会切磁场聚焦强流相对论带状电子束的理论分析和粒子模拟

对低幅值、短周期、有偏置磁极的周期会切磁场中300 keV,3 kA带状电子束的传输进行了理论分析和粒子模拟。给出了将波导宽度考虑在内的轴向均匀带状电子束的空间电荷场和作用在有限厚度的带状电子束的短边和宽边上的聚焦力的表达式,并利用束匹配的方法得到了磁场的幅值和周期,以及电子束通道的宽度和高度等参数。最后根据理论计算的结果进行了3维粒子模拟验证,结果表明:束宽边上聚焦良好,而在短边上带状电子束的轴向有限长效应使得聚焦力与散焦力沿轴向不能完全匹配,在束包络上产生了Betatron振荡,但在300 mm的距离上传输效率仍能达到98%以上,说明有偏置磁极的周期会切磁场聚焦强流带状电子束在理论上是可行的。     

LEADS-DC: A computer code for intense dc beam nonlinear transport simulation

An intense dc beam nonlinear transport code has been developed. The code is written in Visual FORTRAN 6.6 and has ∼13000 lines. The particle distribution in the transverse cross section is uniform or Gaussian. The space charge forces are calculated by the PIC (particle in cell) scheme, and the effects of the applied fields on the particle motion are calculated with the Lie algebraic method through the third order approximation. Obviously, the solutions to the equations of particle motion are self-consistent. The results obtained from the theoretical analysis have been put in the computer code. Many optical beam elements are contained in the code. So, the code can simulate the intense dc particle motions in the beam transport lines, high voltage dc accelerators and ion implanters.

     

COMPLEX DYNAMICS OF HIGH-SPEED AXIALLY MOVING SYSTEMS

In this paper, the dynamic response of a simply supported travelling beam subjected to a transverse load is investigated in the super-critical speed range. The well-known axially moving beam theory is considered and a simple viscous damping mechanism has been introduced. The displacement field is expanded in a series of the buckling modes, a sine series, and different techniques have been used in analyzing the response of the dynamical system. Periodic oscillations are studied by means of continuation techniques, while non-stationary dynamics are investigated through direct simulations. A comparison with the literature and a convergence test on the series expansion are performed. A sample case of a physical beam is developed and numerical results are presented concerning bifurcation analysis and stability, and direct simulations of global postcritical dynamics. A complex scenario of alternate regular and chaotic motions is found in a large range of the main parameters.     

A semi-log-periodic array of spheroidal nanoelements: broadbanding nanoantennas

Nanoantenna arrays can offer unique possibilities for large local-field enhancement, high directivity, and also wavelength tunability over a wide spectral range. In this paper, a semi-log-periodic array of nanospheroidal elements has been studied, which exhibits a narrower beam and also a higher electric field enhancement in comparison with an equal size, equally distanced array of the same element. Through the numerical simulations, it has been presented that the suggested array is of a great potential for improvement of the directivity as well as the electric field enhancement over similar designs. Moreover, a considerable change has been observed in the electric field through gradual transformation of elements from sphere to very thin rod. Next, the effect of geometrical parameters on local-field enhancement has been investigated as a complementary job. Finally, it has been demonstrated that adjusting the number of elements can provide a narrower beam.     

Numerical analysis of space charge effects in electron bunches at laser-driven plasma accelerators

Laser-driven Plasma Accelerators (LPA) have successfully generated high energy, high charge electron bunches which can reach many kA peak current, over short distances. Space charge issues, even in transport lines as simple as a drift section, have to be carefully taken into account since they can degrade the beam quality, preventing any further application of such electron beams. We analyse the space charge effects within an electron bunch with numerical simulations in order to assess their effect on the beam. We use LPA beam parameters published in previous experimental studies. These studies can give an indication of the working point where space charge can dominate the beam dynamics and has to be taken into account in the application of such beams.     

Transmitting intensity distribution after a Gaussian beam incidenting nonnormally on a wedged Fabry-Perot cavity

After deriving the expression of the intensity of the transmitted beam for a Gaussian beam nonnormally passing through a wedged Fabry-Perot cavity, the influence of the wedged angle in Fabry-Perot cavity mirrors alignment at a different tilted angle on the transmission of a Gaussian beam has been investigated theoretically. Numerical simulations show that the incidental angle and the wedged angle in Fabry-Perot cavity mirrors alignment have an important effect on the intensity distribution, the peak intensity, and the position of the peak intensity of the transmitted beam.     

高传输通过率带状电子注聚焦与传输特性的研究

大宽高比的非轴对称带状电子注在微波和毫米波真空电子器件中具有显著的技术优势与应用潜力. 采用轴向均匀磁场可以聚焦和传输带状电子注,且具有易于实现电子注与磁场的匹配和调节、聚焦强流电子注以及无传输截止电压限制等优点,但面临严重的Diocotron不稳定性. 结合单粒子模型理论和冷流模型理论,对带状电子注传输特性进行的研究及其数值计算表明,通过详细设计带状注电子光学系统物理参数,增强聚焦磁场并在传输通道高度方向上选择较大的电子注填充比,可以有效降低Diocotron不稳定性对带状电子注的影响,并实现其长距离稳 关键词： 带状电子注 传输 均匀磁场聚焦 Diocotron不稳定性     

强流质子加速器束流剖面分布及束晕测量系统设计

 针对一台用于加速器驱动洁净核能源系统研究、高占空比的强流质子加速器,开展强流质子直线加速器束晕产生的研究工作,其中的束流剖面分布特别是束晕部分测量的束流诊断系统是研究工作的核心内容。束晕的产生在低能量段尤其重要,且对整个直线加速器的设计有重要影响。介绍了研究束晕增长的束流输运线和测量系统的布局设计,并根据所研究的加速器束流的情况进行束流剖面探测器和束晕测量的设计和预研,包括丝靶材料的模拟计算和选择、机械驱动的控制系统设计和研究、前端模拟电路的设计和仿真模拟、以及整个系统与EPICS和VxWorks的计算机控制接口等。