Palladium-catalyzed cross-coupling reactions of carboxylic anhydrides with organozinc reagents

[reaction: see text] Negishi-type cross-coupling reaction was effected by employing organozincs and anhydrides or mixed anhydrides that formed in situ from sodium salts of the corresponding acids and ethyl chloroformate under the catalysis of palladium(0). A general method for preparing symmetrical/unsymmetrical ketones was developed.     

Highly efficient nickel-catalyzed cross-coupling of succinic and glutaric anhydrides with organozinc reagents

A nickel-catalyzed alkylation of succinic and glutaric anhydrides with alkyl- and arylzinc reagents has been developed. A dramatic olefin effect has been investigated resulting in the identification of several styrene-based promoters which show pronounced enhancements in reaction rate. The substrate scope with respect to electrophilic and nucleophilic coupling partners has been examined and found to be remarkably broad, allowing for rapid introduction of molecular complexity through the use of functionalized coupling partners. Regioselective alkylation of an unsymmetrical succinic anhydride and a profound effect of pendent coordinating olefins on reaction rate suggest a mechanism involving discrete oxidative addition of the nickel complex into the cyclic anhydride followed by a transmetalation event.     

Copper(I) mediated cross-coupling of amino acid derived organozinc reagents with acid chlorides

This paper describes the development of a straightforward experimental protocol for copper-mediated cross-coupling of amino acid derived beta-amido-alkylzinc iodides 1 and 3 with a range of acid chlorides. The present method uses CuCN.2LiCl as the copper source and for organozinc reagent 1 the methodology appears to be limited to reaction with more stable acid chlorides, providing the desired products in moderate yields. When applied to organozinc reagent 3, however, the protocol is more general and provides the products in good yields in all but one of the cases tested.     

A mild Negishi cross-coupling of 2-heterocyclic organozinc reagents and aryl chlorides

A mild Negishi cross-coupling of 2-heterocyclic organozinc reagents and aryl chlorides is described. The use of Pd(2)(dba)(3) and X-Phos as a ligand provides high yields for many examples. An efficient method to generate the organozinc reagents at room temperature is also demonstrated.     

Palladacycle-catalyzed cross-coupling reactions of arylboronic acids with carboxylic anhydrides or acyl chlorides

The triphenylphosphine–cyclopalladated ferrocenylimine (Cat. 2) exhibited highly catalytic activity for the both of arylboronic acids with carboxylic anhydrides and acyl chlorides with low catalyst loading (0.5 mol %). The reactions were unaffected by the presence of electron-releasing and electron-withdrawing substituents in both the arylboronic acids and carboxylic derivatives. Up to 98% yield was obtained for 32 examples. However, they were limited for arylboronic acid with strong electron-withdrawing groups. It is noting that catalyst 2 can be reused for eight times without losing its catalytic activity.     

Phosphine-free cross-coupling reaction of arylboronic acids with carboxylic anhydrides or acyl chlorides in aqueous media

The palladium acetate-catalyzed coupling reaction of aryl boronic acid with carboxylic anhydride or acyl chloride was carried out smoothly in water in the presence of poly(ethylene glycol) (PEG) or 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6]) to give high yields of ketones without the use of phosphine ligands. The Pd(OAc)2-H2O-[bmim][PF6] catalytic system can be recovered and reused eight times with high efficiency for both carboxylic anhydride and acyl chloride.     

Reaction of α-cyanomethylazaheterocycles with α-halo carboxylic acid chlorides and anhydrides

-Cyanomethylazaheterocycles (I) are acylated by -halo carboxylic acid chlorides and anhydrides at the methylene carbon atom to give hetaryl-containing halo ketones.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 11, pp. 1515–1517, November, 1977.     

Nickel-catalyzed cross-coupling reaction of aryl fluorides and chlorides with grignard reagents under nickel/magnesium bimetallic cooperation

Nickel-catalyzed cross-coupling of Grignard reagents with aryl (poly)fluorides or (poly)chlorides can be achieved efficiently in the presence of a new triarylphosphine ligand bearing a nearby hydroxy group. The high reactivity and the unique chemoselectivity (ArF > ArOTf > ArSR) of the catalysis have been attributed to synergy of nickel and magnesium atoms preorganized on the ligand, as has been surmised on the basis of theoretical modeling of the reaction mechanism.     

Selective iron-catalyzed cross-coupling reactions of grignard reagents with enol triflates, acid chlorides, and dichloroarenes

Cheap, readily available, air stable, nontoxic, and environmentally benign iron salts such as Fe(acac)(3) are excellent precatalysts for the cross-coupling of Grignard reagents with alkenyl triflates and acid chlorides. Moreover, it is shown that dichloroarene and -heteroarene derivatives as the substrates can be selectively monoalkylated by this method. All cross-coupling reactions proceed very rapidly under notably mild conditions and turned out to be compatible with a variety of functional groups in both reaction partners. A detailed analysis of the preparative results suggests that iron-catalyzed C-C bond formations can occur via different pathways. Thus, it is likely that reactions of methylmagnesium halides involve iron-ate complexes as the active components, whereas reactions of Grignard reagents with two or more carbon atoms are effected by highly reduced iron-clusters of the formal composition [Fe(MgX)(2)](n) generated in situ. Control experiments using the ate-complex [Me(4)Fe]Li(2) corroborate this interpretation.     

Pd- and Ni-catalyzed cross-coupling reactions of functionalized organozinc reagents with unsaturated thioethers

A variety of unsaturated thioethers have been subjected to cross‐coupling reactions with functionalized zinc reagents in the presence of a transition‐metal catalyst. Three different catalytic systems based on Pd(OAc)₂ or [Ni(acac)₂] and the ligands S‐Phos or DPE‐Phos gave the best results. N‐Heterocyclic thioethers based on a pyridine, pyrimidine, pyrazine, pyridazine, triazine, benzothiazole, benzoxazole, pyrrole, or quinazoline ring, as well as thiomethylacetylenes, serve as electrophiles in this cross‐coupling reaction. Aryl‐, heteroaryl‐, benzylic, and alkylzinc halides with sensitive functionalities, such as ester, nitrile, or ketone groups react at ambient temperature with unsaturated thioethers using a Ni catalyst. The corresponding Pd‐catalyzed reactions require slightly higher temperatures. Large‐scale cross‐coupling experiments (10–20 mmol) with N‐heterocycles are also reported.     

Room-temperature Negishi cross-coupling of unactivated alkyl bromides with alkyl organozinc reagents utilizing a Pd/N-heterocyclic carbene catalyst

A high-yielding cross-coupling reaction of unactivated alkyl bromides possessing beta-hydrogens with alkylzinc halides utilizing a Pd/N-heterocyclic carbene (NHC) catalyst at room temperature is described. A variety of Pd sources, Pd2(dba)3, Pd(OAc)2, or PdBr2, with the commercially available ligand precursor 1,3-bis(2,6-diisopropylphenyl)imidazolium chloride (IPr.HCl) successfully coupled 1-bromo-3-phenylpropane with n-butylzinc bromide in THF/NMP. An investigation of different NHC precursors showed that the bulky 2,6-diisopropylphenyl moiety was necessary to achieve high coupling yields (75-85%). The corresponding ethyl analogue was moderately active (11%). A range of unsymmetrical NHC precursors were prepared and evaluated. The ligand precursor containing one 2,6-diisopropylphenyl and one 2,6-diethylphenyl afforded the coupling product in 47% yield, clearly suggesting a direct relationship between the steric topography created by the flanking N-substituents and catalyst activity. Under optimal conditions, a number of alkyl bromides and alkylzinc halides possessing common functional groups (amide, nitrile, ester, acetal, and alkyne) were effectively coupled (61-92%). It is noteworthy that beta-substituted alkyl bromides and alkylzinc halides successfully underwent cross-coupling. Also, under these conditions alkyl chlorides were unaffected.     

Nickel-catalyzed cross-coupling reactions of benzylic zinc reagents with aromatic bromides, chlorides and tosylates

Benzylic zinc reagents prepared by direct insertion of zinc to benzylic chlorides in the presence of LiCl undergo smooth cross-coupling reactions with aromatic chlorides, bromides and tosylates using Ni(acac)(2) and PPh(3) as a catalyst system.     

Selective mono-alkylation and arylation of aromatic dihalides by palladium-catalyzed cross-coupling with the Grignard and organozinc reagents

Dibromobenzene, dibromothiophenes, dichloro- and dibromopyridine are highly selectively mono-alkylated and arylated with Grignard or organozinc reagents in the presence of palladium complexes as catalysts.     

A novel method for carbon-carbon bond formation palladium-catalyzed cross-coupling reaction of phenyl fluoroalkanesulfonates with organozinc reagents

Cross-coupling reaction of phenyl fluoroalkanesulfonates with three kinds of organozinc reagents in the presence of palladium gives the corresponding alkylbenzenes in good yields. A possible mechanism is suggested.     

NMR kinetic studies on the decomposition of beta-amidozinc reagents: optimization of palladium-catalyzed cross-coupling with acid chlorides

The decomposition of beta-amidozinc reagent 4 by beta-elimination has been shown to be a unimolecular process in both THF and DMF as solvent, with relative rates of 4:1 at room temperature, and activation parameters have been determined. These results indicate the beta-elimination is a syn-process. NMR experiments reveal that as little as 2 equiv of DMF can have a significant stabilizing influence on reagent 4. Use of a mixture of DMA and toluene as the bulk solvent, in place of DMF, has allowed successful palladium-catalyzed cross-coupling reactions of both 4 and the homologous reagent 5 with acid chlorides to yield unsymmetrical ketones (nine examples).     

Acylation of benzimidazolone and its derivatives with acid anhydrides and acid chlorides

N,N-Diacetyl derivatives of benzimidazolones were obtained by the acylation of benzimidazoline and its 5-methyl, 5-chloro, and 5-nitro derivatives with acetic, propionic, and butyric anhydrides and also with monochloro- and monobromoacetyl chlorides.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 386–389, March, 1972.     

Fe-exchanged montmorillonite K10--the first heterogeneous catalyst for acylation of sulfonamides with carboxylic acid anhydrides

Fe-exchanged montmorillonite K10 catalyzes a highly efficient reaction between sterically and electronically diverse sulfonamides and carboxylic acid anhydrides to furnish N-acylsulfonamides in excellent yield and high selectivity. The catalyst can also be reused several times.