Synthesis and Nonlinear Optical Properties of a New A-π-A Two-Photon Compound Utilizing Dibenzothiophene as Center

A new two‐photon material, 3E,6E‐bis(2‐pyrid‐4′‐ylvinyl)dibenzothiophene (BPVDBT), has been firstly synthesized by an efficient Pd‐catalyzed Heck coupling route. The single‐ and two‐photon fluorescence, quantum yields, lifetimes, solvent effects of the chromophore were studied in detail and the compound exhibited solvent‐sensitivity. The fluorescence intensity (I_out) and input excitation intensity (I_in) can fit in well with the quadratic parabolas, which indicates that the up‐converted fluorescence was induced by the two‐photon absorption (TPA). TPA cross‐section of BPVDBT has been measured using the two‐photon‐induced fluorescence method, whose value is 14.24×10^?50 cm⁴·s·photon^?1·molecule^?1 at 750 nm. The experimental results confirm that BPVDBT is a good two‐photon absorbing chromophore with an A‐π‐A type.     

Synthesis and Structural Characterization of Some Novel Trialkylsilyl‐substituted Lithium Benzyl Complexes [Li(tmeda)][CHRSiMe2R′] (R = Ph, 3,5‐Me2C6H3; R′ = Me,tBu, Ph)

The reactions of PhCH₂SiMe₃ ( 1 ), PhCH₂SiMe₂^tBu ( 2 ), PhCH₂SiMe₂Ph ( 3 ), 3,5‐Me₂C₆H₃CH₂SiMe₃ ( 4 ), and 3,5‐Me₂C₆H₃CH₂SiMe₂^tBu ( 5 ) with ⁿBuLi in tetramethylethylenediamine (tmeda) afford the corresponding lithium complexes [Li(tmeda)][CHRSiMe₂R′] (R, R′ = Ph, Me ( 6 ), Ph, ^tBu ( 7 ), Ph, Ph ( 8 ), 3,5‐Me₂C₆H₃, Me ( 9 ), and 3,5‐Me₂C₆H₃, ^tBu ( 10 )), respectively. The new compounds 5 , 7 , 8 , 9 and 10 have been characterized by ¹H and ¹³C NMR spectroscopy, compounds 7 , 8 and 9 also by X‐ray structure analysis.     

Synthesis,Photophysical Properties of Tribranched Chromophores Based on 1,3,5‐Triazine Core and Different Electro‐donating End‐groups

Three two‐photon absorption (TPA) tribranched chromophores were successfully prepared, in which 1,3,5‐triazine is been as electron deficient core, 1,4‐phenylenedivinylene as conjugated bridge, 3,4‐ethylenedioxythiophene (EDOT) ( T1 ), N‐methylpyrrole ( T2 ) or triphenylamine ( T3 ) as electron‐donating end‐groups. Their photophysical properties were studied by absorption, one‐ and two‐photon fluorescence and TPA cross‐section determination. The nonlinear transmission (NLT) measurement in femtoseconds (fs) regime at 800 nm indicates that TPA cross‐section (₂ values of T1 , T2 and T3 with extended Π‐conjugated bridge are much larger than the corresponding chromophore T4 with a short length bridge, and TPA cross‐section of T1 with end‐groups EDOT exhibits a remarkable enhancement compared with T2 and T3 having the same length Π‐system. The chromophores T1 , T2 and T3 show also remarkable up‐converted luminescence and optical limiting activity.     

A novel three‐dimensional CdII coordination polymer: poly[[aquabis(2,2′‐bipyridine)(μ5‐pyrazol‐1‐ide‐3,5‐dicarboxylato)(μ4‐pyrazol‐1‐ide‐3,5‐dicarboxylato)(μ3‐pyrazole‐3,5‐dicarboxylato)tetracadmium(II)] dihydrate]

The title compound, {[Cd₄(C₅H₂N₂O₄)(C₅HN₂O₄)₂(C₁₀H₈N₂)₂(H₂O)]·2H₂O}_n, crystallized in the monoclinic space group P2₁/n and displays a three‐dimensional architecture. The asymmetric unit is composed of four crystallographically independent Cd^II centres, two triply deprotonated pyrazole‐3,5‐dicarboxylic acid molecules, one doubly deprotonated pyrazole‐3,5‐dicarboxylic acid molecule, two 2,2′‐bipyridine ligands, one coordinated water molecule and two interstitial water molecules. Interestingly, the Cd^II centers exhibit two different coordination numbers. Two Cd^II centres adopt a distorted octahedral arrangement and a third a trigonal–prismatic geometry, though they are all hexacoordinated. However, the fourth Cd^II center is heptacoordinated and displays a pentagonal–bipyramidal geometry. The three anionic ligands adopt μ₃‐, μ₄‐ and μ₅‐bridging modes, first linking Cd^II centers into a one‐dimensional wave‐like band, then into a wave‐like layer and finally into a three‐dimensional coordination framework, which is stabilized by hydrogen bonds.     

Synthesis and Structures of ansa‐Titanocene Complexes with Diatomic Bridging Units for Overall Water Splitting

The synthesis of a series of ansa‐titanocene dichlorides [Cp′₂TiCl₂] (Cp′=bridged η⁵‐tetramethylcyclopentadienyl) and the corresponding titanocene bis(trimethylsilyl)acetylene complexes [Cp′₂Ti(η²‐Me₃SiC₂SiMe₃)] is described. The ethanediyl‐bridged complexes [C₂H₄(C₅Me₄)₂TiCl₂] ( 2 ‐Cl₂) and [C₂H₄(C₅Me₄)₂Ti(η²‐Me₃SiC₂SiMe₃)] ( 2‐ btmsa; btmsa=η²‐Me₃SiC₂SiMe₃) can be obtained from the hitherto unknown calcocenophane complex [C₂H₄(C₅Me₄)₂Ca(THF)₂] ( 1 ). Furthermore, a heterodiatomic bridging unit containing both, a dimethylsilyl and a methylene group was introduced to yield the ansa‐titanocene dichloride [Me₂SiCH₂(C₅Me₄)₂TiCl₂] ( 3 ‐Cl₂) and the bis(trimethylsilyl)acetylene complex [Me₂SiCH₂(C₅Me₄)₂Ti(η²‐Me₃SiC₂SiMe₃)] ( 3 ‐btmsa). Besides, tetramethyldisilyl‐ and dimethylsilyl‐bridged metallocene complexes (structural motif 4 and 5 , respectively) were prepared. All ansa‐titanocene alkyne complexes were reacted with stoichiometric amounts of water; the hydrolysis products were isolated as model complexes for the investigation of the elemental steps of overall water splitting. Compounds 1 , 2 ‐btmsa, 2 ‐(OH)₂, 3 ‐Cl₂, 3 ‐btmsa, 4 ‐(OH)₂, 3 ‐alkenyl and 5 ‐alkenyl were characterised by X‐ray diffraction analysis.     

Glycosylated Star‐Shaped Conjugated Oligomers for Targeted Two‐Photon Fluorescence Imaging

A glucopyranose functionalized star‐shaped oligomer, N‐tris{4,4′,4′′‐[(1E)‐2‐(2‐{(E)‐2‐[4‐(benzo[d]thiazol‐2‐yl)phenyl]vinyl}‐9,9‐bis(6‐2‐amido‐2‐deoxy‐1‐thio‐β‐D ‐glucopyranose‐hexyl)‐9H‐fluoren‐7‐yl)vinyl]phenyl}phenylamine (TVFVBN‐S‐NH₂), is synthesized for two‐photon fluorescence imaging. In water, TVFVBN‐S‐NH₂ self‐assembles into nanoparticles with an average diameter of ～49 nm and shows a fluorescence quantum yield of 0.21. Two‐photon fluorescence measurements reveal that TVFVBN‐S‐NH₂ has a two‐photon absorption cross‐section of ～1100 GM at 780 nm in water. The active amine group on the glucopyranose moiety allows further functionalization of TVFVBN‐S‐NH₂ with folic acid to yield TVFVBN‐S‐NH₂FA with similar optical and physical properties as those for TVFVBN‐S‐NH₂. Cellular imaging studies reveal that TVFVBN‐S‐NH₂FA has increased uptake by MCF‐7 cells relative to that for TVFVBN‐S‐NH₂, due to specific interactions between folic acid and folate receptors on the MCF‐7 cell membrane. This study demonstrates the effectiveness of glycosylation as a molecular engineering strategy to yield water‐soluble materials with a large two‐photon absorption (TPA) cross‐section for targeted cancer‐cell imaging.     

2,4‐Disila‐1,3,5‐oxadiazin,Cyclodisilazan‐Carbonsäure‐silylamid und ‐silylester

The lithium salts of the Me₃Si‐ as well as Me₃Si‐ and Me₂SiF‐substituted Cyclotrisilazanes I and II react with tert‐butylacylchloride under ring contraction and formation of the cyclodisilazane‐silylester, Me₃SiN(SiMe₂–N)₂SiMe₂–O–CO–CMe₃ ( 1 ). The lithium salt of the fluorodi‐methylsilyl‐substituted cyclotrisilazan III forms with benzoylchloride primarily in the analogous reaction the carboxy‐silyl‐amide, Me₂SiF(N–SiMe₂)₂SiMe₂–NH–CO–C₆H₅⁺ ( 2 ), which can be converted with III and benzoylchloride into the cyclodisilazane‐silylester, Me₂SiF(NSiMe₂)₂SiMe₂–O–CO–C₆H₅, ( 3 ). A silylester substituted six‐membered disila‐oxadiazine ( 4 ) is the result of the reaction of the lithiated cyclotrisilazane, (Me₂SiNH)₂, (Me₂SiNLi) with tert‐butyl‐acylchloride. The reaction includes anionic ring contraction and can be rationilized by a process analogous to keto‐enol‐tautomerism. Dilithiated octamethyl‐cyclotetrasilazane, (Me₂SiNHMe₂SiNLi)₂, reacts with tert‐butyl‐acylchloride or benzoylchloride in a molar ratio 1:2 to yield symmetrically acylestersubstituted cyclodisilazanes, (RCO–O–SiMe₂–NSiMe₂)₂, R = C₆H₅ ( 5 ), CMe₃ ( 6 ). The reaction mechanisms are discussed and the crystal structures of 2 and 6 are reported.     

Syntheses,Spectroscopic, Electrochemical,and Third‐Order Nonlinear Optical Studies of a Hybrid Tris{ruthenium(alkynyl)/(2‐phenylpyridine)}iridium Complex

The synthesis of fac‐[Ir{N,C₁′‐(2,2′‐NC₅H₄C₆H₃‐5′‐C?C‐1‐C₆H₂‐3,5‐Et₂‐4‐C?CC₆H₄‐4‐C?CH)}₃] ( 10 ), which bears pendant ethynyl groups, and its reaction with [RuCl(dppe)₂]PF₆ to afford the heterobimetallic complex fac‐[Ir{N,C₁′‐(2,2′‐NC₅H₄C₆H₃‐5′‐C?C‐1‐C₆H₂‐3,5‐Et₂‐4‐C?CC₆H₄‐4‐C?C‐trans‐[RuCl(dppe)₂])}₃] ( 11 ) is described. Complex 10 is available from the two‐step formation of iodo‐functionalized fac‐tris[2‐(4‐iodophenyl)pyridine]iridium(III) ( 6 ), followed by ligand‐centered palladium‐catalyzed coupling and desilylation reactions. Structural studies of tetrakis[2‐(4‐iodophenyl)pyridine‐N,C₁′](μ‐dichloro)diiridium 5 , 6 , fac‐[Ir{N,C₁′‐(2,2′‐NC₅H₄C₆H₃‐5′‐C?C‐1‐C₆H₂‐3,5‐Et₂‐4‐C?CH)}₃] ( 8 ), and 10 confirm ligand‐centered derivatization of the tris(2‐phenylpyridine)iridium unit. Electrochemical studies reveal two ( 5 ) or one ( 6 – 10 ) Ir‐centered oxidations for which the potential is sensitive to functionalization at the phenylpyridine groups but relatively insensitive to more remote derivatization. Compound 11 undergoes sequential Ru‐centered and Ir‐centered oxidation, with the potential of the latter significantly more positive than that of Ir(N,C′‐NC₅H₄‐2‐C₆H₄‐2)₃. Ligand‐centered π–π* transitions characteristic of the Ir(N,C′‐NC₅H₄‐2‐C₆H₄‐2)₃ unit red‐shift and gain in intensity following the iodo and alkynyl incorporation. Spectroelectrochemical studies of 6 , 7 , 9 , and 11 reveal the appearance in each case of new low‐energy LMCT bands following formal Ir^III/IV oxidation preceded, in the case of 11 , by the appearance of a low‐energy LMCT band associated with the formal Ru^II/III oxidation process. Emission maxima of 6 – 10 reveal a red‐shift upon alkynyl group introduction and arylalkynyl π‐system lengthening; this process is quenched upon incorporation of the ligated ruthenium moiety on proceeding to 11 . Third‐order nonlinear optical studies of 11 were undertaken at the benchmark wavelengths of 800 nm (fs pulses) and 532 nm (ns pulses), the results from the former suggesting a dominant contribution from two‐photon absorption, and results from the latter being consistent with primarily excited‐state absorption.     

3,5‐Bis­[4‐(diethyl­amino)­benzyl­idene]‐1‐methyl‐4‐piperidone and 3,5‐bis[4‐(diethyl­amino)­cinnamyl­idene]‐1‐methyl‐4‐piperidone: prospective biophotonic materials

The structures of 3,5‐bis­[4‐(diethyl­amino)­benzyl­idene]‐1‐methyl‐4‐piperidone, C₂₈H₃₇N₃O, (I), and 3,5‐bis­[4‐(diethyl­amino)­cinnamyl­idene]‐1‐methyl‐4‐piperidone, C₃₂H₄₁N₃O, (II), have been characterized. Because of conjugation between donor and acceptor parts, the central heterocycles (including the carbonyl group) in (I) and (II) are flattened and exhibit a `sofa' conformation, with a deviation of the N atom from the planar fragment. The dihedral angles between the planar part of the heterocycle and the two almost flat fragments that include a phenyl ring and bridging atoms are 23.2 (1) and 11.2 (1)° in (I), and 11.8 (1) and 8.7 (2)° in (II). One‐ and two‐photon absorption of light and the fluorescence of (I) and (II) have also been characterized.     

New organic–inorganic frameworks incorporating iso‐ and heteropolymolybdate units and a 3,3′,5,5′‐tetramethyl‐4,4′‐bi‐1H‐pyrazole‐2,2′‐diium multiple hydrogen‐bond donor

Poly[bis(3,3′,5,5′‐tetramethyl‐4,4′‐bi‐1H‐pyrazole‐2,2′‐diium) γ‐octamolybdate(VI) dihydrate], {(C₁₀H₁₆N₄)₂[Mo₈O₂₆]·2H₂O}_n, (I), and bis(3,3′,5,5′‐tetramethyl‐4,4′‐bi‐1H‐pyrazole‐2,2′‐diium) α‐dodecamolybdo(VI)silicate tetrahydrate, (C₁₀H₁₆N₄)₂[SiMo₁₂O₄₀]·4H₂O, (II), display intense hydrogen bonding between the cationic pyrazolium species and the metal oxide anions. In (I), the asymmetric unit contains half a centrosymmetric γ‐type [Mo₈O₂₆]⁴⁻ anion, which produces a one‐dimensional polymeric chain by corner‐sharing, one cation and one water molecule. Three‐centre bonding with 3,3′,5,5′‐tetramethyl‐4,4′‐bi‐1H‐pyrazole‐2,2′‐diium, denoted [H₂Me₄bpz]²⁺ [N...O = 2.770 (4)–3.146 (4) Å], generates two‐dimensional layers that are further linked by hydrogen bonds involving water molecules [O...O = 2.902 (4) and 3.010 (4) Å]. In (II), each of the four independent [H₂Me₄bpz]²⁺ cations lies across a twofold axis. They link layers of [SiMo₁₂O₄₀]⁴⁻ anions into a three‐dimensional framework, and the preferred sites for pyrazolium/anion hydrogen bonding are the terminal oxide atoms [N...O = 2.866 (6)–2.999 (6) Å], while anion/aqua interactions occur preferentially viaμ₂‐O sites [O...O = 2.910 (6)–3.151 (6) Å].     

一个新的具有大的吸收截面的双光子引发剂的合成和非线性光学性质

E,E-1,4-Bis（4＇-N,N-diphenylaminostyryl）-2,5-dimethoxybenzene （DPAMOB） has been synthesized by a simple and effective solid phase Wittig reaction and characterized by 1^H NMR spectra and elemental analysis, Linear absorption, single-photon induced fluorescence and two-photon induced fluorescence spectra were experimentally studied. The new dye has a large two-photon absorption （TPA） cross-section of σr= 1007,2 GM [1 GM= 1 × 10^-50 cm^4·s/（photon molecule）] at 800 nm measured by the two-photon induced fluorescence method. The experimental results confirm that DPAMOB is a good TPA chromophore and can successfully initiate two-photon photopolymerization of ethoxylated trimethylolpropane triacrylate esters （SR454）. Finally, a microstructure has been fabricated by use of DPAMOB as initiator.     

Synthesis and Characterization of m‐Terphenyl (1,3‐Diphenylbenzene) Compounds Containing Trifluoromethyl Groups

The bis(silyl)triazene compound 2,6‐(Me₃Si)₂‐4‐Me‐1‐(N?N? NC₄H₈)C₆H₂ ( 4 ) was synthesized by double lithiation/silylation of 2,6‐Br₂‐4‐Me‐1‐(N?N? NC₄H₈)C₆H₂ ( 1 ). Furthermore, 2,6‐bis[3,5‐(CF₃)₂‐C₆H₃]‐4‐Me‐C₆H₂‐1‐(N?N? NC₄H₈)C₆H₂ derivative 6 can be easily synthesized by a C,C‐bond formation reaction of 1 with the corresponding aryl‐Grignard reagent, i.e., 3,5‐bis[(trifluoromethyl)phenyl]magnesium bromide. Reactions of compound 4 with KI and 6 with I₂ afforded in good yields novel phenyl derivatives, 2,6‐(Me₃Si)₂‐4‐MeC₆H₂? I and 2,6‐bis[3,5‐(CF₃)₂? C₆H₃]‐4‐MeC₆H₂? I ( 5 and 7 , resp.). On the other hand, the analogous m‐terphenyl 1,3‐diphenylbenzene compound 2,6‐bis[3,5‐(CF₃)₂? C₆H₃]C₆H₃? I ( 8 ) could be obtained in moderate yield from the reaction of (2,6‐dichlorophenyl)lithium and 2 equiv. of aryl‐Grignard reagent, followed by the reaction with I₂. Different attempts to introduce the ^tBu (Me₃C) or neophyl (PhC(Me)₂CH₂) substituents in the central ring were unsuccessful. All the compounds were fully characterized by elemental analysis, melting point, IR and NMR spectroscopy. The structure of compound 6 was corroborated by single‐crystal X‐ray diffraction measurements.     

Excited State Intramolecular Proton Transfer and Photophysics of a New Fluorenyl Two‐Photon Fluorescent Probe

The steady‐state photophysical, NMR, and two‐photon absorption (2PA) properties of a new fluorene derivative ( 1 ) containing the 2‐(2′‐hydroxyphenyl)benzothiazole (HBT) terminal construct is investigated for use as a fluorescence probe in bioimaging. A comprehensive analysis of the linear spectral properties reveals inter‐ and intramolecular hydrogen bonding and excited state intramolecular proton transfer (ESIPT) processes in the HBT substituent. A specific electronic model with a double minimum potential energy surface is consistent with the observed spectral properties. The 2PA spectra are obtained using a standard two‐photon induced fluorescence method with a femtosecond kHz laser system, affording a maximum 2PA cross section of ～600 GM, a sufficiently high value for two‐photon fluorescence imaging. No dependence of two‐photon absorption efficiency on solvent properties and hydrogen bonding in the HBT substituent is observed. The potential use of this fluorenyl probe in bioimaging is demonstrated via one‐ and two‐photon fluorescence imaging of COS‐7 cells.     

From Dibismuthenes to Three‐ and Two‐Coordinated Bismuthinidenes by Fine Ligand Tuning: Evidence for Aromatic BiC3N Rings through a Combined Experimental and Theoretical Study

The reduction of N,C,N‐chelated bismuth chlorides [C₆H₃‐2,6‐(CH?NR)₂]BiCl₂ [where R=tBu ( 1 ), 2′,6′‐Me₂C₆H₃ ( 2 ), or 4′‐Me₂NC₆H₄ ( 3 )] or N,C‐chelated analogues [C₆H₂‐2‐(CH?N‐2′,6′‐iPr₂C₆H₃)‐4,6‐(tBu)₂]BiCl₂ ( 4 ) and [C₆H₂‐2‐(CH₂NEt₂)‐4,6‐(tBu)₂]BiCl₂ ( 5 ) is reported. Reduction of compounds 1 – 3 gave monomeric N,C,N‐chelated bismuthinidenes [C₆H₃‐2,6‐(CH?NR)₂]Bi [where R=tBu ( 6 ), 2′,6′‐Me₂C₆H₃ ( 7 ) or 4′‐Me₂NC₆H₄ ( 8 )]. Similarly, the reduction of 4 led to the isolation of the compound [C₆H₂‐2‐(CH?N‐2′,6′‐iPr₂C₆H₃)‐4,6‐(tBu)₂]Bi ( 9 ) as an unprecedented two‐coordinated bismuthinidene that has been structurally characterized. In contrast, the dibismuthene {[C₆H₂‐2‐(CH₂NEt₂)‐4,6‐(tBu)₂]Bi}₂ ( 10 ) was obtained by the reduction of 5 . Compounds 6 – 10 were characterized by using ¹H and ¹³C NMR spectroscopy and their structures, except for 7 , were determined with the help of single‐crystal X‐ray diffraction analysis. It is clear that the structure of the reduced products (bismuthinidene versus dibismuthene) is ligand‐dependent and particularly influenced by the strength of the N→Bi intramolecular interaction(s). Therefore, a theoretical survey describing the bonding situation in the studied compounds and related bismuth(I) systems is included. Importantly, we found that the C₃NBi chelating ring in the two‐coordinated bismuthinidene 9 exhibits significant aromatic character by delocalization of the bismuth lone pair.     

Pseudopolymorphs of 2,6‐diaminopyrimidin‐4‐one and 2‐amino‐6‐methylpyrimidin‐4‐one: one or two tautomers present in the same crystal

The derivatives of pyrimidin‐4‐one can adopt either a 1H‐ or a 3H‐tautomeric form, which affects the hydrogen‐bonding interactions in cocrystals with compounds containing complementary functional groups. In order to study their tautomeric preferences, we crystallized 2,6‐diaminopyrimidin‐4‐one and 2‐amino‐6‐methylpyrimidin‐4‐one. During various crystallization attempts, four structures of 2,6‐diaminopyrimidin‐4‐one were obtained, namely solvent‐free 2,6‐diaminopyrimidin‐4‐one, C₄H₆N₄O, (I), 2,6‐diaminopyrimidin‐4‐one–dimethylformamide–water (3/4/1), C₄H₆N₄O·1.33C₃H₇NO·0.33H₂O, (Ia), 2,6‐diaminopyrimidin‐4‐one dimethylacetamide monosolvate, C₄H₆N₄O·C₄H₉NO, (Ib), and 2,6‐diaminopyrimidin‐4‐one–N‐methylpyrrolidin‐2‐one (3/2), C₄H₆N₄O·1.5C₅H₉NO, (Ic). The 2,6‐diaminopyrimidin‐4‐one molecules exist only as 3H‐tautomers. They form ribbons characterized by R²₂(8) hydrogen‐bonding interactions, which are further connected to form three‐dimensional networks. An intermolecular N—H...N interaction between amine groups is observed only in (I). This might be the reason for the pyramidalization of the amine group. Crystallization experiments on 2‐amino‐6‐methylpyrimidin‐4‐one yielded two isostructural pseudopolymorphs, namely 2‐amino‐6‐methylpyrimidin‐4(3H)‐one–2‐amino‐6‐methylpyrimidin‐4(1H)‐one–dimethylacetamide (1/1/1), C₅H₇N₃O·C₅H₇N₃O·C₄H₉NO, (IIa), and 2‐amino‐6‐methylpyrimidin‐4(3H)‐one–2‐amino‐6‐methylpyrimidin‐4(1H)‐one–N‐methylpyrrolidin‐2‐one (1/1/1), C₅H₇N₃O·C₅H₇N₃O·C₅H₉NO, (IIb). In both structures, a 1:1 mixture of 1H‐ and 3H‐tautomers is present, which are linked by three hydrogen bonds similar to a Watson–Crick C–G base pair.     

Cobalt(II) chloride complexes with 1,1′‐dimethyl‐4,4′‐bipyrazole featuring first‐ and second‐sphere coordination of the ligand

In catena‐poly[[dichloridocobalt(II)]‐μ‐(1,1′‐dimethyl‐4,4′‐bipyrazole‐κ²N²:N^2′)], [CoCl₂(C₈H₁₀N₄)]_n, (1), two independent bipyrazole ligands (Me₂bpz) are situated across centres of inversion and in tetraaquabis(1,1′‐dimethyl‐4,4′‐bipyrazole‐κN²)cobalt(II) dichloride–1,1′‐dimethyl‐4,4′‐bipyrazole–water (1/2/2), [Co(C₈H₁₀N₄)₂(H₂O)₄]Cl₂·2C₈H₁₀N₄·2H₂O, (2), the Co²⁺ cation lies on an inversion centre and two noncoordinated Me₂bpz molecules are also situated across centres of inversion. The compounds are the first complexes involving N,N′‐disubstituted 4,4′‐bipyrazole tectons. They reveal a relatively poor coordination ability of the ligand, resulting in a Co–pyrazole coordination ratio of only 1:2. Compound (1) adopts a zigzag chain structure with bitopic Me₂bpz links between tetrahedral Co^II ions. Interchain interactions occur by means of very weak C—H...Cl hydrogen bonding. Complex (2) comprises discrete octahedral trans‐[Co(Me₂bpz)₂(H₂O)₄]²⁺ cations formed by monodentate Me₂bpz ligands. Two equivalents of additional noncoordinated Me₂bpz tectons are important as `second‐sphere ligands' connecting the cations by means of relatively strong O—H...N hydrogen bonding with generation of doubly interpenetrated pcu (α‐Po) frameworks. Noncoordinated chloride anions and solvent water molecules afford hydrogen‐bonded [(Cl⁻)₂(H₂O)₂] rhombs, which establish topological links between the above frameworks, producing a rare eight‐coordinated uninodal net of {4²⁴.5.6³} ( ilc ) topology.     

A novel dinuclear MoVI complex with tris(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)methane

Recrystallization of [MoO₂Cl{HC(3,5‐Me₂pz)₃}]Cl [where HC(3,5‐Me₂pz)₃ is tris(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)methane] led to the isolation of large quantities of the dinuclear complex dichlorido‐2κ²Cl‐μ‐oxido‐κ²O:O‐tetraoxido‐1κ²O,2κ²O‐[tris(3,5‐dimethyl‐1H‐pyrazol‐1‐yl‐1κN²)methane]dimolybdenum(IV) acetonitrile monosolvate, [Mo₂Cl₂O₄(C₁₆H₂₂N₆)]·CH₃CN or [{MoO₂Cl₂}(μ₂‐O){MoO₂[HC(3,5‐Me₂pz)₃]}]·CH₃CN. At 150 K, this complex cocrystallizes in the orthorhombic space group Pbcm with an acetonitrile molecule. The complex has mirror symmetry: only half of the complex constitutes the asymmetric unit and all the heavy elements (namely Mo and Cl) are located on the mirror plane. The acetonitrile molecule also lies on a mirror plane. The two crystallographically independent Mo⁶⁺ centres have drastically different coordination environments: while one Mo atom is hexacoordinated and chelated to HC(3,5‐Me₂pz)₃ (which occupies one face of the octahedron), the other Mo atom is instead pentacoordinated, having two chloride anions in the apical positions of the distorted trigonal bipyramid. This latter coordination mode of Mo^VI was found to be unprecedented. Individual complexes and solvent molecules are close‐packed in the solid state, mediated by various supramolecular contacts.     

2,2‐Difluor‐1,3‐diaza‐2‐sila‐cyclopenten – Synthese und Reaktionen

2,2‐Difluor‐1,3‐diaza‐2‐sila‐cyclopentene – Synthesis and Reactions N,N′‐Di‐tert‐butyl‐1,4‐diaza‐1,3‐butadiene reacts with elemental lithium under reduction to give a dilithium salt, which forms with fluorosilanes the diazasilacyclopentenes 1 – 4 ; (HCNCMe₃)₂SiFR, R = F ( 1 ), Me ( 2 ), Me₃C ( 3 ), N(CMe₃)SiMe₃ ( 4 ). As by‐product in the synthesis of 1 , the tert‐butyl‐amino‐methylene‐tert‐butyliminomethine substituted compound 5 was isolated, R = N(CMe₃)‐CH₂‐CH = NCMe₃. 5 is formed in the reaction of 1 with the monolithium salt of the 1,4‐diaza‐1,3‐butadiene in an enamine‐imine‐tautomerism. 1 reacts with lithium amides to give (HCNCMe₃)₂SiFNHR, 6 – 12 , R = H ( 6 ), Me ( 7 ), Me₂CH ( 8 ), Me₃C ( 9 ), H₅C₆ ( 10 ), 2,6‐Me₂C₆H₃ ( 11 ), 2,6‐(Me₂CH)₂C₆H₃ ( 12 ). The reaction of 12 with LiNH‐2.6‐(Me₂CH)₂C₆H₃ leads to the formation of (HCNCMe₃)₂Si(NHR)₂, ( 13 ). In the presence of n‐BuLi, 12 forms a lithium salt which looses LiF in boiling toluene. Lithiated 12 adds this LiF and generates a spirocyclic tetramer with a central eight‐membered LiF‐ring ( 14 ), [(HCNCMe₃)₂Si(FLiFLiNR)]₄, R = 2,6‐(Me₂CH)₂C₆H₃. ClSiMe₃ reacts with lithiated 12 to yield the substitution product (HCNCMe₃)₂SiFN(SiMe₃) R, ( 15 ). The crystal structures of 1 , 5 , 6 , 9 , 11 , 13 , 14 are reported.     

Energy Transfer in Aminonaphthalimide‐Boron‐Dipyrromethene (BODIPY) Dyads upon One‐ and Two‐Photon Excitation: Applications for Cellular Imaging

Aminonaphthalimide–BODIPY energy transfer cassettes were found to show very fast (k_EET≈10¹⁰–10¹¹ s^?1) and efficient BODIPY fluorescence sensitization. This was observed upon one‐ and two‐photon excitation, which extends the application range of the investigated bichromophoric dyads in terms of accessible excitation wavelengths. In comparison with the direct excitation of the BODIPY chromophore, the two‐photon absorption cross‐section δ of the dyads is significantly incremented by the presence of the aminonaphthalimide donor [δ≈10 GM for the BODIPY versus 19–26 GM in the dyad at λ_exc=840 nm; 1 GM (Goeppert–Mayer unit)=10^?50 cm⁴ s molecule^?1 photon^?1]. The electronic decoupling of the donor and acceptor, which is a precondition for the energy transfer cassette concept, was demonstrated by time‐dependent density functional theory calculations. The applicability of the new probes in the one‐ and two‐photon excitation mode was demonstrated in a proof‐of‐principle approach in the fluorescence imaging of HeLa cells. To the best of our knowledge, this is the first demonstration of the merging of multiphoton excitation with the energy transfer cassette concept for a BODIPY‐containing dyad.     

Synthesis,one‐ and two‐photon properties of poly[9,10‐bis(3,4‐bis(2‐ethylhexyl‐oxy)phenyl)‐2,6‐anthracenevinylene‐alt‐N‐octyl‐3,6‐/2,7‐carbazolevinylene]

The synthesis, one‐ and two‐photon absorption (TPA) and emission properties of two novel 2,6‐anthracenevinylene‐based copolymers, poly[9,10‐bis(3,4‐bis(2‐ethylhexyloxy)phenyl)‐2,6‐anthracenevinylene‐alt‐N‐octyl‐3,6‐carbazolevinyl‐ene] ( P1 ) and poly[9,10‐bis(3,4‐bis(2‐ethylhexyloxy)phenyl)‐2,6‐anthracenevinyl‐ene‐alt‐N‐octyl‐2,7‐carbazolevinylene] ( P2 ) were reported. The as‐synthesized polymers have the number‐average molecular weights of 1.56 × 10⁴ for P1 and 1.85 × 10⁴ g mol^?1 for P2 and are readily soluble in common organic solvents. They emit strong bluish‐green one‐ and two‐photon excitation fluorescence in dilute toluene solution (? _P1 = 0.85, ? _P2 = 0.78, λ_em( P1 ) = 491 nm, λ_em( P2 ) = 483 nm). The maximal TPA cross‐sections of P1 and P2 measured by the two‐photon‐induced fluorescence method using femtosecond laser pulses in toluene are 840 and 490 GM per repeating unit, respectively, which are obviously larger than that (210 GM) of poly[9,10‐bis‐(3,4‐bis(2‐ethylhexyloxy) phenyl)‐2,6‐anthracenevinylene], indicating that the poly(2,6‐anthracenevinylene) derivatives with large TPA cross‐sections can be obtained by inserting electron‐donating moieties into the polymer backbone. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 463–470, 2010